Currently, there are several ways to access the Internet. You can connect to the network using a USB modem, satellite dish and optical cable. Connecting with a cable and a router has its advantages. This is a stable signal reception level, high data transfer speed and an affordable price. A router is the choice of those who value the reliability of transmitting their data. How to set up a router will be discussed in the material.

The Huawei HG8245 router is a modern tool for high-speed Internet. Home or office multimedia gadgets that use internet access can be connected through this router. With one Huawei HG8245 router you can connect several devices. This and desktop computer, laptop, tablet, and cell phone. In addition, by connecting to the IP television service, you can use this router to watch your favorite TV programs in high definition.

The HG8245 optical terminal is equipped with 4 outputs for “fixed connection” (LAN) and 2 telephone outputs for IP telephony. The advantage of this model is the presence WI-FI functions. Thus, using the Internet at home or in a small office becomes even more convenient.

Characteristics

In appearance, this router has a modern design. It is longer and thinner than previous generation routers. With a length of 19.5 cm, the thickness of the router is 3.5 centimeters, it will not take up much space on a computer desk or on the top cover system unit. It can also be mounted on the wall - for this purpose, mounting connectors are located on the bottom of the device.

In addition to several connectors for communication with a computer, the HG8245 is equipped with connectors for connecting a television cable (IP-TV), and IP-telephony inputs. In addition, you can connect a backup battery to the router, as well as a USB memory device.

Connection

Two wires are connected to the router: one – optical – to the Optical input, the second – to the LAN connector. When connecting to the Optical connector for the first time, you do not need to connect a wire. Next, you need to turn on the power of the router by pressing the on/off button located on the back wall of the device.

Login via Web interface

To configure the Huawei hg8245 router after turning it on for the first time, you must:

Upon completion of the data collection, all you have to do is click the “login” button and go to the router’s web page.

Internet and connection types

On the loaded page “http://192.168.100.1” you need to set all active LAN ports in the corresponding section of the menu (tick them) and save the changes.

After this, you need to follow the following algorithm:

Setting up the HuaweiHG8245 router for Rostelecom

In most modern operating systems with a properly configured router, a high-speed connection is created automatically.

If this does not happen, you can create a new connection through the control panel:

MGTS

If your provider is MGTS, setting up the Huawei hg8245 router is quite easy. To do this, you need to create a high-speed connection. Except standard method through " Network connections” in the control panel, it can be created and edited in the router menu on the web page.

This requires:

• follow the link http://192.168.100.1, on the “WAN” tab in the “Username” section, enter the login that is specified in the agreement with MGTS, and in the “Password” tab enter the password;
• After activating the ports, you need to go to the “WAN” tab and create a new connection. To do this, click the “New” button;
• then in the “Mode” mode you need to select the “Route” section;
• Next, set the settings as follows: service list – INTERNET, connection type – PPPoE;
• We fill out the “login” and “password” fields using the contract data. The name and code are indicated in the text of the agreement with the provider;
• in the “Blinding options” section, you need to check off those ports that were activated at the very beginning of the setup;
• in addition, you must specify the WLAN identification number; you can find it in the technical support of the provider you connected to;
• Finally, the data must be saved, the computer can be restarted, and after that, to work on the Internet, you will need to connect the cable to the “Optical” connector.

Video: instructions for opening ports

Turning on and setting up Wi-Fi

For correct settings Wi-Fi required:

IPTV

Using the HG8245 router you can view digital channels in excellent quality.

To set up a router for IPTV, you need:

• log in via browser at http://192.168.100.1. To access the settings page, you must enter the following data: username “root” and password “admin”;
• then go to the Network application tab. Here you need to enable group data transfer. To do this, you need to check the box next to “Enable IGMP” and set the search mode to snooping, and then save this data;
• in the WAN Settings menu section (WAN->WAN configuration) you need to create a new configuration by clicking the “New” button;
• then in the “Encapsulation mode” column, select the connection type - IPoE. For IP-TV, the protocol version required is IPv4;
• configure the configuration for connecting the set-top box like this:

After completing data entry, you must go to the system settings menu mode (“System tools”) and save the configuration for digital television by clicking on the “Save configuration” button.

Reset

Sometimes it becomes necessary to reset the router settings to factory settings. This is due to insurmountable errors in the operation of the router that are not related to the technical component. In some cases, the need to reset settings arises if the user has forgotten the router password and there is no way to recover it.

To reset settings and personal passwords The HG8245 router has a “Reset” button.

To reset installed configurations, follows:

• press the “Reset” button when the router is turned on;
• hold for a few seconds and release.

After this, you can disconnect the optical cable and configure the Huawei HG8245 router again.

Changing the factory password

Many people know how important it is to install strong password on wireless connection, however in Lately The security of the router password is also important. Knowing his password, attackers are more likely to monitor the user’s online activity, steal confidential data, and even block access to the Internet. Therefore, it is recommended to change the factory default password.

To do this you need:

• with the router turned on, go to the terminal page – http://192.168.100.1, specifying the default data: login – root, password – admin;
• then you should go to the “Security” tab;
• When changing the password, you will need to indicate the old login and password, and then the new password and its confirmation. To increase security, it is better to use long and complex passwords - from 10 characters - Latin letters and numbers.

Firmware update

Modern routers, as a rule, use universal and flexible program codes, allowing you to make changes to the network configuration and easily change passwords. However, not all firmware is the same; the router may begin to work intermittently, and access to the Internet may be lost. In this case, updating the firmware will help.

To do this you need:

Once the update is complete, the router should reboot. After updating the firmware, the router settings will be reset to factory settings, so to access the Internet you need to configure the router.

Modern router manufacturers are trying to ensure that everyone, even a novice computer user, can configure and use it. To do this, clear and understandable instructions to the user are placed on the sites, and the system quick launch device helps prepare the router for operation. The main thing is that the more competently the router is configured, the fewer interruptions in the Internet.

Connecting to the Internet via a fiber optic cable requires the use of appropriate equipment on the subscriber's side. In some cases it has to be configured to suit the user's needs. In this article we will consider one of such cases, namely setting up the Huawei hg8245h router to work in the Rostelecom operator network.

There are quite a lot of devices that receive the Internet via an optical cable, each has its own strengths and weak sides. This Rostelecom router is from Huawei has quite rich functionality for this class of equipment.

Main technical capabilities of the terminal:

• Functions as a wireless access point in accordance with 802.11b/g/n standards.
• USB2.0 and 1.1 support.
• Possibility of receiving/transmitting voice using VoIP technology via an optical channel.
• Features of a standalone DHCP server with support for NAT, DMZ and DDNS.

On the back panel of the Huawei hg8245h Rostelecom router there are 4 LAN connectors for connecting client devices via Ethernet technologies, two ports for Rj-11 telephone connectors, a power button, next to which there is a connection point network adapter. The hg8245 modification has an optical port on the same panel, unlike the hg8245h, which has it at the bottom. In addition, all models have the ability to connect USB drives, for which there is a corresponding connector on the side or back, next to the “Start” button.

Setting up a router - video version

Logging into the router and starting settings

Before you start Wi-Fi settings The Huawei HG8245 router from Rostelecom needs to be reset to its factory state. This procedure should be performed if the device has been in use and the default settings have been changed. Reset is carried out using the “Reset” button, which must be pressed and held for 10-15 seconds.

You can change settings either through a cable connection or via a wireless channel (to do this, you need to turn it on using the “WLAN” button on the side). In the case of a wire, you need to make sure that the network options of the PC allow you to detect the router. In most cases, no manipulations are required, but sometimes when you try to log into the hg8245h admin panel, the browser returns an error like “Page is unavailable.” To fix it, you need to go to the network settings, find the properties of the IPv4 protocol and specify the receipt of dynamic DNS and IP addresses.

So, insert one connector of the LAN cable into the PC port, the other into any LAN port of the router. The wire is supplied with the equipment, but any other can be used (except for rare exceptions when the connectors are crimped to connect two PCs directly). Next we perform the following steps:

1. We plug in the PC and router (if not already plugged in).
2. We launch any Internet browser, for example, Opera.
3. We write to him address bar 192.168.100.1 and press “Enter”, the exact address of the Rostelecom router can be found on its bottom panel or from the operating instructions.
4. The huawei-hg8245h user authentication page will open, where you need to enter your login and password, which by default has the values ​​“telecomadmin” and “admin” (exact authorization data can be found from your provider or in the instructions).
5. If everything is entered correctly, go to the Huawei router and perform further network configuration.

As mentioned above, you can enter the admin panel of the Huawei terminal not only through a cable connection, but also via Wi-Fi. The sequence is the same as for a cable connection, with the difference that the browser must be launched on a smartphone or tablet.

Important! Using a wireless connection, you can perform the same manipulations with the router as via cable, with the exception of updating the firmware. An attempt to flash the firmware via WI-FI will inevitably lead to the device losing its functionality without the possibility of warranty repair.

Setting up an Internet connection with Rostelecom

After successful authentication, the terminal status page will open. To further configure the Huawei router, go to the WAN tab and click New. If there are any connections on this tab, delete them (before creating a new one). On the page of the newly created connection, activate the WAN mode (check the Enable WAN checkbox)

PPPoE

• Select PPPoE in the menu on the left “Encapsulation Mode”.
• Set the “Mode” parameter to “Route”, this parameter allows the equipment to distribute the Internet to other devices.
• In the “Service List” column we indicate the type “Internet”.
• To connect via this standard You must enter the login/password provided by the provider.
• On the same page we indicate the WLAN ID, which we also find out from Rostelecom.
• Save by clicking “Apply”.

If all data is entered correctly, initial setup The Huawei router can be considered complete; communication with the Rostelecom network should appear after saving the changes.

Setting up Wi-Fi on the Huawei hg8245h router

When the initial configuration for the Rostelecom network is completed, you can change the wireless channel parameters on the configured router. First of all, you need to change WIFI password. To do this, go to the WLAN tab, put a tick in the checkbox that activates wireless transmission data and fill out the fields below:

• Network name (SSID-Name) – any Latin alphabet and numbers (optional).
• Authentication – WPA/WPA2.
• Encryption type – TKIP/AES.
• You can change the password on the Huawei Rostelecom wifi router by entering it in the “WPA PreSharedKey” field; it must be at least eight characters using numbers.
• Save the changes by clicking Apply.

After changing the configuration wireless network, you can connect to it using the new authorization data. That is, you need to select from the list the network with the name that was specified in the SSID-Name field and connect to it using a new password.

Setting up IPTV on a router

Setting up a Rostelecom router for broadcasting interactive television is as follows:

• Go to the WAN tab and create another connection (click “New”).
• Select the operating mode for Iptv – Bridge.
• Turn on Enable Vlan.
• In the VLAN ID item we indicate the ID provided by the provider (VLAN value for IPTV), and enter the same value in the Multicast VLAN ID field.
• Binding options: We put a tick in the checkbox of the port into which we plan to connect the cable of the TV set-top box.
• Confirm by clicking Apply.

But that is not all. Setting up Huawei traffic optimization. To do this, go to the “Network Application” -> “IGMP Configuration” tab. On the page that opens, in the field opposite “IGMP Enable”, indicate “Enable”, and change the “IGMP Work Mode” option to “Snooping”. Confirm by clicking on the “Apply” button.

After all the above-described manipulations on the router, there will be no problems with how to configure the Huawei router to work on the Rostelecom network. You may need to reboot the equipment, but otherwise everything depends on the provider.

To connect subscribers to the Internet via fiber optic cable (GPON technology), Rostelecom most often uses Huawei optical terminals. Despite the controversy surrounding the quality of this equipment, practice shows that it is completely justified for home needs. By at least, situations in which the user needs to independently change the configuration of the routers of this company arise extremely rarely. Problems may arise only when connecting to a wireless network. In this case, we have prepared for you instructions for setting up a Huawei hg8245 router from Rostelecom.

What settings can you make yourself?

Devices for connecting access to global network GPON and FTTB technologies are called optical terminals. But in the text we will use the word “router”, since most readers are more familiar with it. When connecting to the Internet for the first time, Rostelecom takes care of how to set up the Huawei hg8245 router on its own. And don’t be surprised by the fact that technicians do not go to the settings panel when installing equipment. Routers for optical Internet are usually flashed remotely.

After installing and connecting the device in your apartment, it automatically contacts the provider and downloads the configuration necessary for operation. This approach reduces the likelihood of errors during settings to zero and ensures that all basic parameters will be set on the router in the same way as on the station. Most often, at the end of booting, a new password is set on the device, different from the standard one. This is done so that the subscriber cannot get into the configuration interface and make any changes to the equipment configuration.

If your Internet suddenly stops working, and rebooting the power supply equipment does not bring results, call technical support. The second line operator will start remote configuration of the Rostelecom Huawei router, and the device, as during the initial installation, will receive all the necessary data from the station.

Do not try to change the basic configuration yourself! Firstly, it will not coincide with the one indicated at the station. Secondly, the cause of the problem may not be on your equipment at all, but on the provider itself. But the setting wireless connection on routers of this brand you can do it yourself. Below we will describe in detail how to do this.

How to log into a Rostelecom Huawei router

To change the router configuration, there is a very convenient and intuitive settings interface. To get into it, open your usual browser (the program through which you usually work with the Internet) and enter the following combination of numbers in the line at the top of the window - 192.168.100.1.

Attention: the period after the last unit is not needed!

These numbers are IP address Rostelecom Huawei router. After typing them, press the Enter key, and the welcome window of the settings system will open in front of you. In the “Account” field enter “telecomadmin” (without quotes), and in the Password field – “admintelecom”, also without quotes. Click the Login button and you will be taken to the setup interface.

The above login and password are standard for Rostelecom optical equipment. But if the credentials were changed during the initial firmware, they may not work. How to enter the settings of the Rostelecom Huawei router in this case? Try a few more password options, which are recommended on the provider’s forums:

• NWTF5x%RaK8mVbD;
• NWTFx5%;
• nE7jA%5m.

These passwords work in conjunction with the telecomadmin login. If the system recognizes them as incorrect, try changing your login to root. The password for it will be admin. If that pair does not work, call RTK technical support at 8-800-1000-800 and ask the operator to provide you with information to enter the equipment settings. But keep in mind that on the first line technical support, where you will be taken by the above telephone number, such information is not available. They will fill out an application for a consultation with technicians, and you will have to wait about a day for a call from them.

How to set up wi-fi on the Rostelecom Huawei HG8245 router

If everything went well with the credentials, setting up a Huawei router from Rostelecom to distribute the Internet via Wi-Fi will not take much time. Once in the web interface, select top menu WLAN tab. Clicking on it will take you to the wireless network settings page. The screenshot below shows the buttons and fields you need to work.

First of all, activate the Enable WLAN checkbox (in other words, click the checkbox next to this inscription). Next, click the New button to activate the fields to fill out. In the SSID Name line (in some firmware versions it may be called Service Set Identifler), enter the name of your Wi-Fi network. You come up with it yourself. Next, check the Enable SSID, Broadcast SSID and WWM Enable checkboxes. In the line marked Associated Device Number, enter the number of users who can simultaneously work on your Wi-Fi network. You can see the maximum value of this parameter in the instructions for the Huawei router from Rostelecom.

To save the declared parameters, click the Apply button at the bottom of the window. Next, in the drop-down lists, set the values ​​indicated in the screenshot above. In the Pre-Sared Key line, enter your password from Wi-Fi networks and press the button again to save the settings.

Attention: the Wi-Fi password is not the Internet password! It is not specified in the agreement with the provider, and Rostelecom does not have any information about it. You can come up with this password yourself, or use the factory key of your router. For Huawei routers from Rostelecom, the password for the wireless network is usually indicated on a label on the back of the device, preceded by the words pass or key.

Next, go to the WAN tab of the top menu. Here, in the field under the Connection name heading, you need to select the name of your connection, and at the bottom of the page, check the box next to SSID1. Once done, click Apply to save your configuration changes.

The final stage of setting up a Rostelecom Huawei router

To complete setting up the Huawei hg8245 router from Rostelecom for Wi-Fi distribution, go to the LAN item in the main menu. In the column that appears on the left, select the DHCP Server Configuration line. A new window will open in front of you, in which you will need to check the boxes opposite the words “Enable primary DHCP server” and “Enable DHCP L2Relay”.

Just below you will see lines labeled Primary DNS Server and Secondary DNS Server. In them you will need to enter sets of numbers separated by dots, indicating the addresses of DNS servers for your network. These parameters are unique for each macro-regional branch. It is better to clarify them before setting up the Huawei router from Rostelecom on hotline company, or on the website in the “Support” section -> “ Home Internet" -> "Equipment". After setting all the values, do not forget to save the settings with the Apply button.

And the final touch - go to the System Tools tab and select the first item “Configuration File” in the menu on the left. In the updated window, click the large Save Configuration button to save all the parameters you entered into separate file. After this, you can exit the web interface - the setup is complete.

Attention: if, when exiting the settings mode, the modem or computer asks you to reboot, agree. Some equipment models require this for the updated settings to take effect.

As you can see, Huawei, or, as some call it, Highway router, is easy to set up on Rostelecom. Some DSL models require much more movement from the user when setting up. The main thing is to check with your provider all the data necessary to change the configuration in advance. Then the entire setup process will take you no more than 15 minutes.

Not long ago, Beltelecom began installing new and modern Huawei HG8245A and HG8245H-256M modems to its subscribers. Nice white body and appearance pleasing to the eye, and the presence of two antennas provides good signal via wi-fi throughout the apartment.

Sometimes we have to configure Huawei HG8245A | HG8245H-256M and wi-fi. In this article, we will share with you how to configure these modem models.

Setting up the Huawei HG8245A modem | HG8245H-256M

To configure the Huawei HG8245A modem | HG8245H-256M needs to be connected to it via the wire that comes in the kit. Usually it is yellowish or gray in color, connect one end of the wire to the port LAN1, and the other into a computer or laptop.

To login to modem HG8245A enter the username telecomadmin password admintelecom and press Login.

To login to modem HG8245H-256M enter the username root and password admin and press Login.

If the window does not appear, you need to go to the settings network card register the IP address, subnet mask, default gateway, DNS server.

If everything is done correctly, you will be taken to the menu. To configure it, you need to select the item WAN.

1. Selecting a connection 4_INTERNET_R_VID_10.
2. WAN Mode: Route WAN.
3. User Name: enter the contract number.
4. Password: enter the password.
5. Check the box SSID1 to the position selected.
6. We save all entered settings by pressing the button « Apply » .

1. Select an item LAN
2. In the left menu select DHCP Server Configuration.
3. Put a tick in the line Enable primary DHCP Server.
4. Put a tick in the line Enable DHCP Relay.
5. Put a tick in the line Enable Option 125.
6. Enter Primary DNS And Secondary Server(as picture).
7. To accept and save the settings, press the button « Apply »

Setting up Wi-Fi on a Huawei HG8245A modem | HG8245H-256M

For WIFI settings select the tab in the top menu WLAN.

1. Check the box Enable WLAN.
2. Press the button NEW.
3. In field SSID Name enter the name of the wireless network.
4. Put a tick Enable SSID.
5. Put a tick Broadcast SSID.
6. Put a tick Enable WMM.
7. Field Number of Associated determines the simultaneous number of connected devices.
8. In field Authentication Mode choose WPA2 Pre-Shared Key or WPA\WPA2 Pre-Shared Key.
9. In field Encryption Mode put TKIP&AES.
10. In field WPA PreSharedKey enter the password for Wi-Fi.
11. Save the settings by pressing the button « Apply ».

Tune Huawei modem HG8245A | HG8245H-256M It’s not that difficult if you do everything carefully and slowly according to the instructions written above. We hope that this article helped you and you configured your Huawei HG8245A modem.

Failed to configure?

1. Check your account balance.
2. Call us, we will set it up.

Huawei offers its customers new equipment that provides broadband access to information services for home users, as well as workers in small office establishments.

The EchoLife HG8245T terminal is a special multifunctional gateway that is designed for use in FTTH networks provided with a fiber optic cable to the end user's home.

Broadband access is implemented using GPON technology. For this purpose, support for Class B+ optical modules is provided and FEC is used for upstream and downstream directions.

Thanks to the secure authentication mode (access password, SN or SN + access password), it was possible to ensure a high level of security when working in the information environment.

Proposed device HG8245T except wired access provides work in wireless mode, using 802.11b/g/n protocols.

This gateway provides users with ample opportunities to use modern digital voice communications.

For this purpose, the operation of the SIP or H.248 protocols is supported; separate streams are separated for more high speed exchange of voice traffic. The new devices also offer multicast capabilities and IPv6 support.

There is support for dual stack IPv6/IPv4 and DS-Lite, and also uses IGMP V2 and V3 snooping.

A distinctive feature of Huawei HG8245T is its ease of management and administration, which can be carried out in remote access. For this purpose, it is possible to control via the Web interface, or using remote control via OMCI or TR069.

In order to monitor the health of the device, you can use the remote mode of testing POT ports, simulate the mode of calls, DHCP and PPPoE connections.

Thanks to the wide capabilities of the proposed equipment, it has become a cost-effective solution for resolving issues of information traffic routing in FTTH networks in the process of providing services such as broadband Internet access, VoIP services, and HD video transmission.

This equipment will become the basis on which it will be possible to develop the structure of the FTTH network in order to provide modern, diverse information services.