Popular program Bandicam allows you to create long-term videos from your desktop, in particular, record the process of a computer game. The application allows you to capture the entire screen or a separate part of it. But, like any other program, Bandicam requires proper configuration. Before starting work, you need to work on the quality of video, sound and image. Setup is quite simple and won't take much time.

Initial parameters

When you start the program, a window will appear in front of you in which you need to specify the following parameters:

For high-quality video and game recording, you need to configure the sound and microphone.

Set up audio recording as follows:

1. Open the item "Video";
2. Finding the tab "Record";
3. Opening "Settings" and choose "Sound";
4. Near the line "Record sound" put a tick;
5. Select the main sound source. Often this is a computer, so in the drop-down menu "Basic sound device» select “Win7 Sound (WASAPI)”. The list should indicate the operating system used on your computer. This is what you should choose.
6. Specify the second device in the drop-down menu "Additional audio device" in case you are going to supplement the video with your comments. In this case, you need to select a microphone.
7. Click on the button "Settings" next to this menu item to check the sound quality.

A list of devices for recording and playback will open in a new window. Tap on the microphone or say a few words. The scale opposite the device you selected should glow green and show the volume of sound picked up by the microphone.

Remember that the file soundtrack will have more weight. If you want to create a file with minimal weight, do not enable the Record Audio option.

“Two-Channel Mixing” will help reduce the size of the final file. To do this, check the box next to it before finishing the sound settings. If there is no sound on the entire computer, then read this article: “?”.

Image Settings

If you plan to take screenshots using the program, then you will also need to go to the “Image” menu. In it you can configure the following parameters:

• select a hotkey to take a screenshot or disable it;
• configure their automatic creation at certain time intervals;
• remove the cursor from screenshots by checking the box next to “Without cursor”;
• select image format. The program offers the following formats: BMP, PNG, JPG.

Additional settings

We also suggest that you familiarize yourself with additional settings programs.

First of all, it will be very convenient to configure hotkeys to control recording. This will help you quickly stop shooting or resume it. By default this is the F12 key . You can change it to another key in the Video menu item.

If necessary, you can also remove the mouse cursor. To do this, in the same “Video” menu, check the box next to the “Without cursor” item. If, on the contrary, you need a cursor, you can customize the effects of its selection. This is quite convenient if you plan to record various training videos using the program. For this:

1. Open the "Video" menu;
2. Find the “Settings” button in the “Recording” column and click it;
3. In the menu that opens, find “Effects” and select the appropriate ones.

Another useful thing that can be used is logo. To add your own watermark to a post you need to:

1. Open the “Video” menu;
2. Go to the “Record” tab;
3. Open “Settings”, tab – “Logo”.

How to avoid mistakes when recording games?

Many users complain about errors when recording games through Bandicam. To ensure that neither the game nor the video lags, you need to pay attention to the following settings:

• Target . Here you need to select meaning "DirectX/OpenGL window". Note that given value ideal for recording guides of any kind computer games;
• Best to choose frequency 30, it will minimize the likelihood of lags while programs are running. This parameter quite enough to record high-quality video.
• Change the program codec in the “Video” menu . To do this, open the “Format” tab – “Settings” item. Install the codec "Motion JPEG" instead of the standard value. By the way, don't forget.

Bandicam video setup for game recording

We invite you to watch a short video that simply and clearly describes the main points of setting up video and audio parameters for high-quality recording of games from a computer.

If a problem with sound often arises, then there is reason to think about it.

Bandicam is designed to record video lessons and games directly from your PC screen. It has a very simple interface and can be set up quite quickly - in just a few minutes. The main settings that you need to pay attention to before starting recording are video and audio parameters, check the functionality of the microphone.

Videos with reviews and walkthroughs of computer games are very popular on You Tube. If you want to gather a lot of subscribers and demonstrate your gaming achievements, you just need to record them directly from your computer screen using Bandicam. In this article we will look at several important settings, which will help you shoot video through Bandikam in game mode.

Game mode will allow you to record video with better quality than the standard screen one. Bandikam records videos based on DirectX and Open GL.

How to set up Bandicam to record games

1. Game mode is activated by default when the program starts. We configure FPS on the corresponding tab. We set a limit in case your computer has an insufficiently powerful video card. We activate the FPS demonstration on the screen and set a place for it.

2. If necessary, turn on the sound in the settings and activate the microphone.

3. Launch the game on the computer, or go to the game window. A green FPS number means the game is ready to be recorded.

4. Having minimized the game window, go to the Bandicam window. In game mode, the window indicated in the line below the mode selection buttons will be removed (see screenshot). Click on “Rec”.

After launching the game in full-screen mode, you can start recording by pressing the F12 key. If recording has started, the FPS number will turn red.

5. Finish shooting the game with the F12 key.

In this article we will talk about how to properly configure Bandicam to record games. We will talk about the basic settings that directly affect both the quality of the recorded video and the resources consumed by the program. We will also try to select optimal settings both for high-power and low-power computers.

Where to download "Bandikam"?

But before we talk about how to set up Bandikam to record games, we need to make a note. The fact is that many people simply do not know where to download from this program. Of course, there is only one answer to this question - from the official website of the developer. Now we'll tell you why.

When you download Bandikam from an unreliable source, you risk letting your operating system virus. After all, absolutely anyone can easily change the program code by placing malicious software, and then make the already infected version of the program publicly available. Where can you download the program from, thereby infecting your computer.

Even if you have an antivirus installed, this does not mean that it will have time to detect and eliminate the danger, or that it will miss it altogether. Nowadays, hackers have become adept at creating viruses that can easily bypass your protection.

After we have figured out where it is best to download the program from, we can proceed directly to how to set up Bandikam to record games.

Video setup

Setting up video is the main setting that should be done immediately after installing the program on your computer. After all, it will allow you to shoot high-quality material, which will subsequently be easy to process and mount.

This setting is considered the largest, but this does not mean that it is the most difficult, especially if you follow our instructions, you can complete it in a matter of minutes.

So what you will need:

1. Go to the FPS tab, which is located on home page programs.
2. Select the position of the frame rate indicator on the monitor. To do this, check the box next to the appropriate item and indicate the position a little to the right.
3. Set frame rate limits when recording. To do this, check the "Set limit" option and enter 30-60 FPS in the field next to it. This setting will allow you to improve your computer's recording performance. If you are confident in the power of your PC, then set it to 60 FPS, if not, then, accordingly, 30 FPS.
4. Go to the "Video" tab.
5. In the "Recording" column, check the box next to "Start/Stop - hotkey". In the field next to it, indicate the same key. In the future, by clicking it, you will start recording.

In general, these are all the settings related to video, now you know a little more about how to set up “Bandicam” for recording games, but that’s not all, there’s still sound adjustment ahead.

Sound settings

With sound, everything is much simpler; there are not many parameters, or to be more precise, only two. The fact is that initially the program disables the option to record sound from both the system and the microphone, and all you need to do is enable these options. For this:

1. While on the "Video" tab, click on the "Settings" button, which is located in the "Recording" column.
2. In the window that opens, go to the first tab - “Sound”.
3. Check the box next to "Record audio". Here, if you want the audio to be recorded separately from the video, check the box next to “Save in parallel to uncompressed WAV audio files.”
4. Where it says “Main device”, indicate your speakers or you can leave it using the “Win ​​7 Sound (WASAPI)” standard.
5. If you want audio to be recorded from a microphone, select it in the “Additional device” column below.
6. Click OK.

Now you know how to set up the Bandicam sound for recording games.

Improving video and audio quality

To finish the story about how to set up Bandicam for recording games, it’s also worth mentioning how to improve the quality of audio and video.

As you might guess, to do this, you just need to increase all the settings of the corresponding components. However, if you have a weak PC, don't do this.

You need:

1. In the "Video" tab, enter the settings in the "Format" column.
2. Select file format - AVI.
3. Select in video full size, set 60 FPS and increase quality to 100.
4. In audio, increase the bitrate and frequency to the maximum.

Hi all! Yesterday we talked about how to use Fraps, but today let's look at how to use Bandicam, which is Fraps's main competitor. If you have not read the previous article and want to familiarize yourself with it, then you can do so using this one.

Today I will tell you in detail, step by step, how to use Bandicam. We will start with installing the program, and end with a look at all the basic settings and functions that Bandikam has. After reading this article, you will easily be able to take advantage of all the benefits of the program and, most importantly, you will know what is what and why it is needed at all.

A quick note. The version of Bandikam that we will consider today is the following: 2.3.3.860 , that is, the newest one, and since it may not coincide with your version, I advise you to update your Bandicam or download the 30-day trial version from the official website: "Bandicam.com". Subsequently, you can easily upgrade to the full version of the program.

How to use Bandicam. Installation

First, let's see how to install Bandikam. After downloading the Bandicam installer, launch it by double-clicking the left mouse button. Having done this, a window will appear in front of you with a choice of installation language:

Select the very first item, that is, Russian (you can choose any other if you wish), and press the button " OK" to go further:

This is the initial welcome window where you just need to click the " Further":

Here you will need to accept license agreement(although no one reads it, you can become an exception) by clicking on the button " I accept":

At this step, you can choose where the program shortcut will be located after installing it. By checking the " Program Group", after installing the program, a shortcut will be created in the program group, " Desktop Icon" - to the desktop, and " Pin to Taskbar" - to the taskbar.

Here you can select the installation folder. Once done, click the " Install" to proceed to the installation of the program itself.

After waiting for the Bandicam installation to complete, a new window will appear where, without unchecking the " Launch Bandicam", click the " button Ready"The installation of Bandicam can be considered complete.

Now let's move on to looking at the program interface, and we'll start with the very first menu, called " General".

Menu General

Here (1) , at the top, you can select the folder where the captured videos will be saved. Again, select only a folder that is located on a hard drive that has many free space, if you don’t want to lose all your videos when recording. Also, a little lower, there are three points and a button " Advanced":

• Bandicam window always on top. By selecting this item, Bandikam will always be located above all other windows.
• Start Bandicam minimized to tray. When you launch Bandicam, the program will automatically minimize to the computer tray (which is located in the lower right part of the screen).
• Run Bandicam on Windows startup. Here, as is clear from the description, you can make Bandikam run along with Windows.

Here, using the second point (2) , You can set a timer for auto video recording.

Well here (3) by pressing the button " Setting", You can determine after how much time or location the video recording should end, as well as what to do after that.

Let's see what's behind the " Advanced":

General Tab

In the first tab, " General", there are several points that are already familiar to us and several new ones. Let's consider only the second of them, that is, the new ones.

We'll start with the top three points. (1) :

• Show FPS in captured video/image (Only in "Game Recording Mode"). Allows you to record the number of frames in the game in a separate text file.
• Show tip/information bar. Here you can hide the bottom information panel of Bandicam. This function only works in full version programs.
• Turn off tray balloon notifications. By checking this box, tray notifications will no longer be shown.

Start full-screen recording on Bandicam startup. This item (2) allows you to automatically start recording full screen after starting the program.

Output Tab

Here, again, there is one that we have already considered and a couple of new points.

First two points (1) :

• Create output sub-folder when writing a file. Allows, for convenience, to create a subfolder where files will be saved.
• Enable write caching on the disk. Makes it possible to cache captured videos on disk.

Here (2) You can change the file naming format. Let's say you can make sure that the first part of the video title contains not the name of a particular game or program, but your name, and the second part contains the serial number of the video.

Hooking tab

In this tab you can make Bandikam stop recognizing applications that run on certain versions DirectX and OpenGL. Just click on the desired item and cancel Bandicam’s support for one or another version of the libraries. If you need it, of course.

Language tab

In this tab you can change the program language.

Others Tab

We'll look at this tab a little later.

FPS menu

1. Here you can change the quick button for changing the location of the frames per second counter and activate the display of the counter in a specific location on the screen.
2. Well, here you can enable the frames per second limit and change the corresponding hotkey.

Video menu

We come to the main menu of the program, " Video", in which you can change certain video and audio settings.

At the very top (1) There are the following five points:

• Record/Stop Hotkey. Change video recording shortcut key.
• Pause Hotkey. Change the shortcut key to pause the video.
• Show mouse cursor. Show mouse cursor when recording video.
• Add mouse click effects. Allows you to add special animations around the cursor when you click the mouse.
• Add webcam overlay. Add an overlay to recorded video, webcam video.

Click on the " Settings" to go to detailed settings.

Sound Tab

Let's look at the first two points first. (1) :

• Record sound. Activates sound recording.
• Save audio tracks while recording (.wav). Save audio files separately from video, in .wav format.

Here (2) , You can select the computer's main audio device. By clicking on the " Settings"a little to the right, a window with Windows sound settings will open.

Here (3) a second sound device is selected and, basically, this device is a microphone. Again, by clicking the " Settings", you will go to audio Windows settings, namely - to the section " Record".

Webcam tab

In this tab you can activate recording from a webcam, change the location of the webcam, etc.

Add webcam overlay to video (1) . Add webcam video when recording.

In the left column (2) the following points are located:

• Webcam. Selecting a webcam.
• Video size. Resize webcam video. Default is 20%.
• Position. Change the position of the webcam video on the screen.

And now the right column:

• Settings. Transition to software settings webcams.
• Preview. See what the webcam video will look like when recording.
• Left/R Margins. Left and right indentation of webcam video (in percentage).
• Top/B Margins. Indentation of video from the webcam at the top and bottom (in percentage).

And the bottom two points (3) :

• Preview webcam on a screen (Only DX 8 or later, and OpenGL). Show webcam video when recording video. Will only work if the game or application supports DirectX version 8 or higher or OpenGL.
• Enable preview toggle hotkey. Video from the webcam will only appear when you press a certain key, which you can change.

Logo tab

Using the "tab" Logo", You can add a logo to your videos. To change the logo (watermark), click to the right of the caption " Image"You can control the transparency of the image using the slider" Opacity".

The remaining points are very similar to those in the previous tab, so to save time we will not consider them.

Effects Tab

Here you can configure mouse animation effects. In the upper part, you select the color of the animation when you press the left and right mouse buttons, and in the lower part, you select the light flare from the cursor.

Options Tab

IN last tab Recording settings contain the following items:

Here (1) The program priority changes. That is, this means how much random access memory will be allocated by the system for Bandikam and taken away from other programs.

Three more points (2) :

• Skip recording while frame is not updated. Skip recording when frames are not updated.
• Use enhanced capture method (faster, only DirectX 9). Use an advanced capture method, which improves application speed. Only works if the application supports the DirectX 9 library.
• Use enhanced capture method (faster, only Windows 8 or above). Use an advanced capture method, which improves application speed. Valid only on Windows 8 and higher.

Click " OK"to go back.

Back to the menu again Video. Here (2) The format of the recorded videos, as well as the audio contained in it, is shown. By clicking on the " Settings", a new window will open with format settings:

Selecting the recording video format (AVI or MP4) (1) . I wrote about this in the article: "". If you make videos on YouTube, I recommend reading this article.

In the middle of the window there are the following items:

Let's move on to audio settings (3) :

• Codec. Codec for compressing audio files.
• Bitrate. "Bitrate" of audio files. The higher the value, the better the audio quality.
• Channels. Audio channels. Stereo is two channels (right and left), and Mono is one.
• Frequency. Audio frequency in hertz.

Press the button again OK"to go back.

In this tab we have one more button to consider, called " Presets":

Here you can choose the template according to which your videos will be recorded, or in other words, what your videos will be focused on. For example, by selecting " YouTube (720p)", Your video will be “tailored” for the Youtube site, and have a resolution of 1280x720.

Menu Image

And we are getting closer and closer to the end. Let's move on to the "Image" menu.

Capture area (1) :

• Hotkey. Choice " hotkey" to take screenshots.
• Repeat screen capture XX seconds. Automatically take screenshots every XX seconds.
• Show mouse cursor. Show mouse cursor on screenshots.
• Enable shutter sound. Play camera sound when taking screenshots.

In this area (2) You can choose the screenshot format, like: BMP, PNG, JPG (Normal) and JPG (High quality).

Output menu

Here you can look at the latest recorded videos and screenshots. Press " Play"to play video," Edit"to edit the video (you will need third party program Bandicut), " Upload" to upload the video to Vimeo.com and " Delete" to delete the video or screenshot.

Menu About

And the last menu, which contains information about Bandicam, such as version, license, home page and so on.

How to use Bandicam. Video recording

To record a video using Bandicam, select one of the two modes at the top of the window and click on the record button. For those who don’t know where you can change these modes, here’s a screenshot (on the left is Game Mode, and on the right is windowed mode):

That seems to be all. I told you about how to use Bandicam, and now you know about all the main settings and functions that are present in the program. Finally, I wish you good luck in filming!

Can shoot video from selected objects, windows various programs, passing games and taking screenshots.

Shooting objects highlighted by a frame

To shoot video using Bandicam or take a screenshot from a selected object, you need to click on the “Target” button and select “Screen area”.

Bandicam game recording software

The object capture window will appear. This window can be expanded or reduced.

Capture window in which Bandicam will shoot

To take a screenshot, you need to click on the camera icon on the frame of the capture window. Before you start shooting with Bandicam, you need to place the object you are shooting in the capture window. Next, click the “Record” button. The window frame will turn red, which means that video recording has started in Bandicam. To finish shooting video through Bandicam, click the black square and the recording will stop immediately and the recording file will be saved on your computer in the folder you specified.

In Bandicam, voice and video recording is stopped using the pause and stop buttons

To watch the finished video, click the “Open” button and the folder where videos from Bandicam are saved will open.

Removing program windows

First you need to click on the “Target” button and select “DirectX/OpenGL Window”.

Setting up Bandicam for filming games

To start recording video through Bandicam you need to make some window active; to do this, just move the mouse cursor over the frame of the program window and click left button mice. The name of the active window will be displayed in the program window.

Video on how to shoot with Bandicam

Now all that remains is to click the “Record” button and Bandicam will immediately begin recording everything that happens in this window. To stop recording you need to press the black square. You can take a screenshot at any time by pressing the F11 key on the keyboard (You can set any key in the settings). To view the finished video or screenshot, you need to click the “Open” button on the “Basic” tab.

We shoot video games

To start shooting games through Bandicam, you need to click on the “Target” button and select “DirectX/OpenGL Window”.

Bandicam settings for game recording

Next, launch the game and for Bandicam to start recording games, just press the F12 key, and pressing the same key will stop the recording. To take a screenshot you need to press the F11 key (these keys can be customized). To shoot Bandicam without lags, you need to select MPEG-1 mode in the video settings. If Bandicam does not record video for more than 10 minutes, it means

Video

This video shows how to record a game using Bandicam.