We already have it on our website detailed instructions by entering settings on routers different manufacturers, and even there is . Today we will look at how to access the settings on Asus routers. The process itself is practically no different from other manufacturers, but since devices from Asus are very popular, this article will definitely not be superfluous.

We will do everything according to the standard scheme: first we will connect to the router via a network cable or wi-fi network, then we will go to the control panel through a browser. You can go into the settings and change them from almost any device. From a computer, laptop, tablet, phone, etc. But, if possible, I recommend using a laptop or desktop computer and accessing the settings via a network cable. Via Wi-Fi is also possible, just don’t flash your router over a wireless network, otherwise you might get bricked :)

Getting access to the settings of the Asus router

If you are already connected to your router, then scroll down the page a little. You can skip the connection process. If not, then you need to establish a connection via cable or Wi-Fi. Let's first look at how to connect to an Asus router using a network cable.

Everything is very simple. We take the cable that comes with the router and connect it to the router’s LAN connector (look carefully, do not connect to the WAN, they are signed). And on a computer or laptop, connect the cable to the network connector. Like that:

Power on the router (if you haven't turned it on yet) and we can continue. If there is also a WAN cable connected to the router, then you don’t have to disconnect it, it won’t interfere with us.

Wi-Fi connection

If you have already set up your router, then connect to your wireless network. I think you know how to do this (if not,). If you have a new router, then immediately after connecting power to it, it will start broadcasting wireless network with a standard name. Most likely, it will be called "Asus" and will not have a password. Just connect to it from the device from which you will access the control panel.

How to enter settings if you forgot your Wi-Fi password?

If you have forgotten your wireless network password and you do not have any connected devices from which you can go to the control panel and see the password, then you can go to the settings via cable. And if this is not possible, then you can reset your Asus router (press the RESET button for 10 seconds) and configure it again (wi-fi network will be without a password).

Go to the address 192.168.1.1

After we have connected to the router, open the browser and address bar dial the address 192.168.1.1 . Follow it. If the router has not yet been configured, then most likely the settings page will immediately open, there will be a quick wizard Asus settings. If you are prompted for a login and password, then the standard ones are admin And admin. If you haven't changed them yet. And if you changed the password to enter the control panel and forgot it, you will have to reset the settings.

The standard data for accessing the settings is indicated at the bottom of the router itself.

What to do if you can’t enter the settings of your Asus router?

It all depends on what kind of problem (error) and at what stage you have it. For many people, problems appear at the stage of connecting to the router. Or, after connecting, the “Page Unavailable” settings simply do not open in the browser; it is impossible to go to the address 192.168.1.1. These are the most popular problems.

Try the following:

• Check out this article on this issue:
• Necessarily .
• If the IP settings are set to receive automatically, but the problem persists, then check whether you have connected the cable correctly to the computer and router. Or are you connected to Wi-Fi networks router. Check if the router is powered on (the power indicator should be on).
• Try logging into the control panel from another device.
• If you can’t enter the settings of your Asus router when connecting via cable, then try connecting via Wi-Fi. And vice versa.
• Reset your router settings and try opening the address 192.168.1.1 again.

If something doesn’t work out, you can write about it in detail in the comments, and we’ll sort out your problem together.

Don't know how to log into your Asus router? I’m afraid that if I say that logging into your personal account occurs at router.asus.com or 192.168.1.1 and authorization occurs through the login and password admin-admin, then many may not understand exactly how to do this. So let's talk about everything in order. First, let's figure out how to connect it to a computer via wifi, then log into the administrator system and configure WireLess. And at the end you will find a visual video that shows the whole process in detail.

This instruction relevant for Asus router models RT-N12, RT-N11P, RT-G32, RT-N10, RT-N10P, RT-N10U, RT-AC51U and others with a black-blue admin panel.

Logging into the Asus router via the web interface

So, before we can log into the ASUS router, we need to perform a number of steps and set a couple of configurations on the computer from which the setup will be done. Namely:

1. Connect the power adapter to the router and plug it into a power outlet
2. Enable "Power" button
3. in “default” using the “Reset” button - it is small, located next to the antenna and recessed deep into the case. To press it, use a pin or pencil.
4. Remove the Internet cable from the computer and insert it into the blue WAN connector on the router body
5. Take the cable " twisted pair", from the router package and connect it to the PC in place of the Internet cable. Insert it with the other end into the yellow LAN port on the router - any of the 4.

After that, go to the computer settings and find “Network and Sharing Center” in the Windows “Control Panel”:

(Start - Control Panel - Network and Internet - Network and Sharing Center shared access- Change adapter settings)

Here we find “Local Area Connection”, right-click on it and go to the “Properties > Internet Protocol Version 4” section.

We check the boxes to receive all data “automatically” and save the settings with the “OK” button.

router.asus.com - how to log into your personal account Asus 192.168.1.1?

After this, you can already log into the router. Any device has a sticker, which Asus places on bottom part housings. You can, of course, check me and look at its contents, but I can say with my eyes closed what it says:

• Connection address - 192.168.1.1 or router.asus.com
• Login - admin
• Password - admin

Did you guess right? Otherwise! More than a dozen copies of such equipment had to be installed. If you did everything correctly in the previous step on your PC, then when you enter “ http://router.asus.com" or " http://192.168.1.1» you should get to the web interface personal account Asus. Now you can go directly to, which is the subject of a separate detailed article - read!

I can't log into the router at Router.Asus.Com

Now let's talk about what to do if you do everything according to the instructions, huh. To begin with, I advise you to immediately look at how your Internet adapter is configured on your computer or laptop. It's either LAN card, where the cable or wireless module is inserted. Depending on what you are connecting through.

Nowadays everyone mostly uses operating system Windows 10. Therefore, I will show you how to check these parameters in it.

Go to the “Network and Sharing Center”.

Open the link “Change adapter settings”

You will see two adapters - “Ethernet” and “Wireless Network”. If the one we need is gray, then we activate this device - right-click the mouse and click “Enable”

Now we also call up the menu window and open “Properties”

Here in the list we select “Internet Protocol Version 4”. And check the boxes for “Obtain an IP address” and “DNS server in auto mode.

The IP address of your ASUS personal account does not open

The error in logging into the Asus router via IP may also be due to the fact that it was once changed. That is, you are simply typing the wrong value. Finally, there is another reason why the login page to the WavLink configuration interface may not be accessible. If this is the case, then in the “Status” section you can find the same IP address that is listed in the router settings in this moment.

Login and password admin are not suitable

Finally, if the authorization page still opens for you, but the standard ADMIN login and password indicated on the label does not work. What to do? This tells us that they were also replaced during the previous network setup. Unfortunately, only factory settings will help here.

Video on how to log into an Asus router

Today we will talk about how to go into the router settings. Sometimes you need to enter the settings, but many people forget how to do this after connecting and configuring the router. In this article I will tell you how to enter various models. If you know how to enter the settings of your router but cannot do it, here is an article that describes. This article is designed for the fact that your router is already connected to the computer (if the router is not connected to the computer, read the article ““). Let's get started with the instructions.

General login instructions.

You can enter the settings using any browser. You need to enter the router address into the address bar and enter your username and password.

First, let's figure out where to get the router address. On many models, the address is written at the bottom of the label, and the login and password are also indicated there.

If you don’t have a label or don’t have access to it, you can also look in the network card settings.

On Windows XP here>>

On Windows 7 here>>

You can find out more about how to determine the router address.

Once you have determined the address of your router, enter the address into the address bar in your browser and press Enter. An Authorization window will appear in front of you, asking for Login (Username) and Password. On many models, the following settings are set by default: Login - admin, password - admin. Also look carefully at the authorization window; they sometimes write the default login and password, for example, the Zyxel company (below I will show what it looks like). After entering the data, press “Enter” and go to the settings of your router.

Let's apply this scheme on some models. The main thing that you must understand is that further we will consider the case when the router is already connected and has standard settings entrance. If this is not the case, then the scheme is simple: we determine the address of the router, if we changed the password and login, we remember and enter it. Also, if you couldn’t remember the changes, reset to standard settings (how to do this is described in the article “How to connect a router”), and then simply reconfigure it.

Login to router d link dir 300

This entry method is also suitable for models d link dir 615, d link dir 320, d link dir 620. Enter 192.168.0.1 into the address bar of the browser (you can go to the settings of the d link dsl 2640u router at 192.168.1.1). In the window that appears, enter your login and password. If the window looks like the picture below, enter only the login-admin, leaving the password blank. :

Then click on the button. That's it, login is complete.

If, after entering the address, any of these windows opens in front of you:

in this case, the Username is admin, the password is admin. Click on the “Login” button. And you will immediately be taken to the Dlink configuration interface. If you are interested in setting up a Dlink router, then on the left side of the page in the menu, select the d link section. In it you will find a description of the setup of any model of Dlink companies.

We use this method for asus rt n10

This option is also suitable for asus rt n12, asus rt g32, asus rt n10p, asus dsl n10 routers. Open the browser and enter 192.168.1.1 in the address bar. The name is the same as on other routers, the default is admin, the password is the same. See picture below:

Once all fields have been filled in, click the “Submit” button. And you will be taken to the router settings. By selecting the ASUS section in the left column, you will find a description of the settings for various Asus models.

It’s also easy to log into the tp link tl wr741nd router

Also suitable for tp link tl wr841nd, tp link tl wr740n. Let's carry out the same steps as described above. Open the browser and enter 192.168.0.1. In the authorization window we will indicate the login and password admin and admin.

Bottom line

This scheme for entering the router settings is suitable for all models, the most important thing is to find out the login and password that you specified when setting up the router. If you haven't changed anything, then everything remains standard. Also on our website you will find many instructions and settings various models routers.

Video: What to do if you can’t access 192.168.1.1, 192.168.0.1

.

In this article, we suggest that you familiarize yourself with the instructions for setting up an Asus router by logging into the admin panel of the router using the data provided for this.

Routers from the manufacturer Asus are among the most popular and widespread in our country, especially the models: RT-AC51U, RT-AC68U, RT-N12, RT-N16, RT-N11P, RT-AC3200, RT-N14U, RT-N66U, RT -AC87U, RT-AC66U, RT-N56U, RT-N56U. The process of setting them up is not much different from setting up equipment produced under other brands, but there are still differences. Therefore, we decided to create separate instructions for Asus routers.

We configure Asus equipment as standard:

1. We connect to the router using a network cable or via a Wi-Fi network.
2. Using any browser, go to the control panel.

Please note that you can enter the settings and change them not only from a desktop PC, but also from any mobile device: tablet, smartphone. However, it is more convenient to do this using a desktop PC or laptop. In this case, it is better that the device is connected via a cable, but if you use wireless connection, then keep in mind that you should not update the router’s firmware using Wi-Fi, because There is a high probability of receiving non-working equipment instead of a working device.

Entering the Asus router settings - 2 connection methods

• If you already have a connection between the router and your computer, you can scroll down this instruction page, since we will start with the connection process.
• If you do not have a connection, you must establish it in one of two ways: through network cable or WiFi compound. Let's look at both options in more detail:

Connecting to the router via a network cable (network).

• Everything is very simple here: we take the cable that comes with the router and connect it to the device using the LAN connector. The connectors are labeled and therefore the error here is minimal, since you can choose any of the four (see the figure below). The second end of the cable is inserted into the connector system unit or laptop. This is what it should look like:

• Now you need to connect power to the router. Should I disconnect the WAN cable that is connected to the device? You don't have to do this this cable It doesn't allow me to make the correct settings.

Connecting to a router via Wi-Fi

If you have previously set up a connection to an Asus router, then this will not be a problem for you. In the case of a new router, immediately after turning it on, it will begin to look for a wireless network, which in most cases will be called Asus.

The network will be without a password, and you just need to join it by clicking on the network and selecting “ Connect“:

How to enter the settings of an ASUS router if you have forgotten your Wi-Fi password?

If you don’t remember the Wi-Fi password and there is no way to find it out using other connected devices, then you will have to use a wired connection. If there is no cable, then you can do this: reset all the router settings to factory settings and set the settings again. To reset your ASUS device to factory settings, you need to press and hold 10 Seconds button RESET.

Login to ASUS admin at 192.168.1.1

• After connecting, you need to open any browser in the address bar and enter the address: 192.168.1.1 . Go to this address. If you are setting up this router for the first time, a page will open where the settings are displayed. Find the Asus device quick setup wizard in these settings. Are you prompted for a password and login? Use standard ones, for example, login - admin and password - admin.

• Of course, if you previously changed your password and login, then enter yours. If the password and login have been changed, but now you cannot remember them, then you need to reset the settings to factory settings, as described above.

Where can I get the address that is written in the browser address bar to access the settings? It is indicated on the body of the router itself. Here:

Don `t come in in the router settings? What to do?

The answer to this question depends on what kind of error you have and at what stage of the process. Some users encounter problems connecting to the router; for many, settings in one browser or another do not open and the message “ the page is not available“. These are the most common problems and to fix them you can try the following:

1. Check IP receiving settings if used the local network or Wi-Fi.
2. Check the IP network settings for the presence automatic receipt address, but the problem persists, then try using a network cable.
3. If the connection was initially made via a cable, then you need to check that it is connected correctly.
4. Make sure that the router is connected to the mains (the red light should be blinking).
5. Try accessing the settings from another device using a cable and Wi-Fi.
6. Reset the router settings to factory defaults and try the connection procedure again.

Connecting a router

Remove the router from the box and install it in a place convenient for you. Connect the power adapter from the kit into the corresponding connector on the back panel of the router and into a 220V outlet. Connect the main network cable (the one that was brought into your apartment when you connected to the K-Telecom network) into the INTERNET port, and connect the included network cable with one end into one of the numbered LAN ports on the back panel of the router, and the other into the network card computer. Installation disk, which comes with the router, you will not need.

Important: Do not connect the main network cable to the numbered LAN ports! This will disrupt the communication service throughout the entire house.

Setting up the router

Open a separate tab in your browser, enter the address 192.168.1.1 in the address bar and press Enter on your keyboard. Having gone to this address, we see the authorization window in the router’s web interface. In the “User Name” line, enter the word “admin” in Latin (English) small (capital) letters without quotes, in the “Password” field - “admin”, in Arabic numerals without quotes. Then press “Log In” on the screen, or press the Enter key on the keyboard.

After this, a window with the router settings will appear in front of you.

To change the interface language, select “Russian” in the “Language” field.

Now you should select the item “ Additional settings» to set up your Internet connection.

In this window you need to select the “WAN” item.

In the “WAN connection type” field, you must select “L 2TP”, the remaining settings must be specified in the same way as in the figures below.

To save the settings, click “Apply”.

Setting up a wireless connection

For settings wi-fi connections On your router, select “Wireless”. In the “SSID” field you must enter the name of your wireless network (numbers and Latin (English) capital and uppercase letters are supported). The remaining points should be indicated in the same way as shown in the figure below.

In the “WPA Pre-Shared Key” field, you must enter the password for your wireless network. It can consist of large and small letters of the Latin alphabet, as well as Arabic numerals. To save the settings, click “Apply”.