"Yota" - federal operator wireless communication. The shareholder of the telecommunications company is OJSC Megafon. According to the first quarter of 2015, Yota’s subscriber base was 1.2 million users. In March of the same year, the operator launched 4G networks in 39 regions of Russia.

Mobile Internet from Yota

Broadband 4G Internet from Yota works in LTE standard- this technology provides high-speed access in cases where the use of digital DSL lines is technically impossible or economically impractical.

On this moment Internet access from Yota can be provided by the following devices:

Yota modems

4G LTE modem

These are compact USB devices weighing about 50 g that provide high-speed network connectivity. Modem The modem can be connected directly to a laptop or computer, or be installed in router with USB port. The latter scheme is used to distribute the Internet from one modem to several computers.

4G LTE + WiFi modems

The same USB modems, but with a WiFi network function. They replace a router, i.e. To distribute the Internet, such a modem is not connected to the router, but simply to any 5V USB power supply, incl. The USB socket of the car radio will do.

Yota pocket routers

4G/WiFi access point with built-in 3G and LTE support. The router is equipped with a battery and operates offline for up to 8 hours; it can be used outdoors. When connected to a PC, it can be used as a USB router.

Yota Internet centers

Internet center with connection to 3G/4G networks. Supports connecting consumer clients via both wired LAN ports and WiFi. A number of models have an RJ-11 telephone jack for connecting landline phone and calls via SIM card.

4G antennas - amplifiers

Thanks to its design and increased size (25-50 cm), it strengthens the carrier signal and thereby increases speed and stability Internet Yota.

Repeaters amplifying Yota 4G

Wireless technologies are far from perfect, so many users are faced with a weak radio signal, as a result of which the Internet speed drops or disappears altogether. Therefore, many users want to know how to strengthen Yota signal. Of course, you can buy special equipment to strengthen the signal, but this pleasure is very expensive. Therefore, you can try to strengthen the Yota signal with your own hands by assembling a special antenna. This is not difficult to do.

How to strengthen Yota signal?

Yota is one of the operators connecting users to wireless wired internet. This provider is popular among residents of the Russian Federation, but many of its clients may experience inconvenience due to the imperfection of the provider’s equipment. Problems arise even in areas where the signal should be clear due to coverage. Therefore, manufacturers are also looking for a way to produce special amplifiers to improve the signal. However, their price may be higher than the modem itself. For example, a branded Wimax amplifier costs around 3.0-3.5 thousand rubles. And this despite the fact that the cost of the modem itself is less than three thousand rubles. You have to pay twice as much for Internet access.

But this is the simplest method that tells you how to strengthen the Yota signal, so many users resort to it. But we will take a different path and will not overpay a lot of money.

It is not always appropriate to pay money for a connection, and then also pay for equipment to strengthen the signal. So, folk craftsmen came up with the idea of ​​doing it themselves. Users claim that they amplify the signal by 7 times, which is why the access speed increases noticeably. These antennas can be used not only with operator Yota, but also with any other.

Types of antennas for Yota modem

There are many options for antennas that are made from different materials. If we highlight the main and simple types, then we must name the following: cans (made from an ordinary metal can), omnidirectional (look like a pencil), pseudosatellites (like satellite dishes, such antennas have a large reflective area).

The simplest one is a can antenna, to create which we need a tin can, an N-socket, a copper wire and a couple of screws. If someone is trying to find out on the forums how to strengthen the Yota signal, then first of all they will advise him to make a can antenna.

It all looks simple, but creating a device requires calculations. We will write below about how to make such an antenna.

We will not write about an omnidirectional antenna, since its manufacture will require knowledge that you most likely do not have. But homemade pseudosatellites are often used. Here, kitchen utensils (a saucepan, for example), foil and household items (for example, an umbrella or a metal grill) are used as a reflector.

Search for the nearest BS

Knowing like Yota is not enough. First of all, you need to understand where the nearest BS is located. Even if your home is listed with the operator in the coverage area, there may not be a signal. Therefore, we look for the direction of the nearest BS and determine how difficult visibility is. In other words, we must understand whether it is even possible to connect with or without an amplifier.

The fact is that in the city good quality BS can guarantee communications while being at a distance of 200-300 meters from the house. But in a village, the distance can be at least 20 km, and the quality of communication will be excellent. Network congestion plays an important role, and in poorly populated areas it is always low.

Before amplifying the Yota signal, we determine where the BS is located. We call the operator (support service) and ask for help in installing the antenna correctly. The provider's forum can also help you do this. You just need to indicate your address. There are even special sites where you can get this information. And if none of the methods helps, just try to find something that interests you online.

Setting up a homemade antenna

Making an antenna is not everything. It is important to configure it correctly. And here the most important role is played by the correct direction of the amplifier, taking into account the vertical and horizontal deviation. It is also worth remembering that the signal tends to be reflected from surfaces, so sometimes it can be caught from an unexpected direction. There is no need to worry too much if you cannot immediately catch a strong signal. You may have to walk around with a laptop and an antenna to find it. If you live in a private house, then you should climb onto the roof of the house.

Visually the signal strength is determined in special program from Yota. You will have it after purchasing the modem. On average, setting up and searching for a signal will take you an hour of time. Approximately the same amount will have to be spent on manufacturing the antenna itself.

Making an antenna to amplify the signal of the Yota modem

It is assumed that you have the calculations. They will not be given here, since this is a completely different profile.

We will need: a tall tin can (for example, for pineapples), a regular N-socket, which is also called “mother”. You also need a copper wire with a cross-sectional diameter of 2 mm and several screws.

So, we take a jar with a diameter of about 8-10 cm and a height of about 13-14 cm. Upper part leave it, no need to cut it. Let there be a plastic cover. Now we screw our N-connector to the can somewhere in the center of the wall and solder a copper piece of wire (about 3.5 cm long) to it, which will act as a waveguide. If there is a plastic lid for the jar, then use it - close the jar. If not, then it is advisable to use something else (for example, film). This will protect the structure from exposure to the external environment. But first, test your creation without the lid.

If you did everything correctly (and made the correct calculations in advance), then only then can you close the jar with a lid. If the signal gets worse after this, use a different cover or don’t use it at all.

Warning

Before you make your own antenna and try to amplify the Yota signal, you should make sure that this is really needed, and you cannot just buy an amplifier. If the calculations are incorrect, there is a small chance of simply ruining your modem. As a result, you will remain at a loss.

If you don’t want to take risks, then just buy a ready-made signal amplification kit. Judging by user reviews, the signal is strengthened significantly and the download speed increases to that stated by the provider.

Conclusion

Now you know how to strengthen the Yota signal, and you can try to do it yourself. It is not at all necessary to spend a lot of money on equipment, although, admittedly, it usually helps a lot. If you are a little familiar with radio technology, you can handle this task without any problems. As a last resort, if you have a radio electronics repair shop in your city, ask them how to strengthen the signal of the Yota modem and offer to help you. An experienced master will cope with this task and will not refuse to work part-time. In any case, it will be cheaper than buying a new amplifier or antenna.

Yota - young Russian operator, which has gained enormous popularity in the field of providing Internet access using 4G/LTE technology.

What are the options for Yota signal amplifiers?

There are three most popular options for amplifying the Yota signal. On our website you can buy any of them:

• 4G/LTE receiving system from Yota antennas, installed in the place where the Yota signal level is the highest, and a mobile router connected to a 4G/LTE antenna and distributing amplified signal via Wi-Fi. This is the simplest and most inexpensive version of the Yota amplifier
• An external client for Yota is a signal amplification device in which the antenna, router, and Yota modem are combined in one protected, sealed housing. This amplifier option is the easiest to install.
• The 4G/LTE amplification kit consisting of a repeater and antenna is the most reliable option for the Yota amplifier, allowing you to achieve maximum signal amplification. And if none of the Yota amplification systems described above suits you, just call us and we will select for you an individual amplifier option that will fully meet all your requirements.

How to choose the right place to install the Yota amplifier?

Buying the right amplifier for Yota is half the task of amplifying the signal. It is equally important to choose the right place to install the antenna or external client. If possible, the amplifier should be installed in the location where the signal level reaches its maximum value. You can determine such a place yourself (when purchasing an amplifier, our specialists will tell you how best to do this), or you can order a service for measuring the signal level and installing an amplification system.

How to make a Yota signal booster using improvised means and get excellent speed? Let's figure out together how to strengthen the Eta signal.

Wireless technologies have always been inferior in speed and stability to conventional wired Internet. With the development of technology, the situation has not changed too much. 4G and LTE, although they have made significant progress compared to the third generation of the network, are still lagging behind cable internet.

To your clients wireless access to the Internet and also sells modems and routers that work exactly. However, many users complain about the Internet, so they want to strengthen the Yota signal with their own hands. In this article you will learn how to make a Yota signal amplifier with your own hands and what you will need for this.

Factors that affect speed

To begin with, let's highlight a list of factors due to which it worsens and the speed drops to frivolous numbers. Here is a rough list:

1. obstacles inside a house or apartment - walls, a lot of furniture, and so on;
2. long distance to the station;
3. number of connected devices;
4. terrain, weather.

This is only an approximate list of what can adversely affect the operation of the Iota device. However, not all factors depend on the user himself. For example, if the network is heavily congested, you will not be able to influence the operation or improve the signal in any way.

What can be fixed?

The most effective way is to install an antenna as an amplifier. Although a standard antenna is built into the router or modem, its power may not be enough for certain conditions. The antenna is a universal amplifier for Iota. You can choose one of two ways:

Let's take a closer look at the second option.

Do-it-yourself Yota signal amplification

First, you need to choose the most advantageous position for the router. It can only be found experimentally. Start the modem and enable the speed measurement service. Move around the room with the device and measure speed at different points. If you can’t achieve consistently high performance, then try installing the device outside the window. However, remember that in this case you will need additional protection from external influences (weather conditions).

Many experts argue that independent amplification does not lead to anything good and only spoils the receiving device. However, in practice homemade amplifiers give a noticeable effect. Let's figure out how to strengthen the signal of the Yota 4g modem using improvised means.

Homemade antenna amplifier

For this device, you need to use a metal object. A metal or aluminum lid from a pot or pan to which the modem is attached works well. This structure must be fixed in the place where you caught the most high speed reception.

You can also use the Yota modem as an amplifier for the 4g signal satellite dish. Also attach the receiving device and take care of protection from external influences so as not to damage the device. The amplifier antenna should be directed towards the network station.

Let's look at a few more ways to strengthen the signal of the 4g Yota modem.

Third party methods

Also when working with wireless internet extraneous interference should be taken into account. To improve your Internet speed, use the following tips:

• remove all equipment that interferes with the operation of the device;
• place the receiving device on free place, which should not contain bulky objects and extraneous electronic and radio equipment;
• disconnect unnecessary devices from Wi-Fi - this will help reduce the load;
• set a password for home wireless network so that no one else can connect to it. This will also increase the stability and speed of the Internet;
• You can also connect two identical router models in parallel, which will improve the signal. For setup, you can find instructions on the Internet or contact specialists.

Now you know how to strengthen the Yota many signal and can increase the speed of your home Internet.

Making an iota signal amplifier is very simple. Many have noticed that LTE routers (like regular ones) have one bad feature - they lose the signal. Sometimes it even gets to the point where, standing next to the transmitting device, we may not see at all. mobile network. To do this, you need to strengthen the Yota signal.

Distortion and signal loss can come from both metal structures and other devices (be it smartphones or microwave equipment).

4G or regular WI-FI router in an equidistant location from all received devices.

If you install an access point or your Yota router on the outskirts of the site - in a country house and try to catch the signal in a gazebo on the other side of the site - then this is not the best The best decision Poor wireless router signal problems

There is no need to install the Yota router next to or in iron boxes or in the corners of walls

All metal objects as well as working electrical appliances (refrigerators, washing machines, dishwashers) greatly reduce WiFi signal transmitted from the Yota router.

Strengthen the signal of the router's iota WiFi antenna

Please remember that standard antennas are omnidirectional and distribute it evenly in all directions. Don’t forget this when placing the router on the border of the property, because if the network is open and not password-protected, half of the signal will go to your neighbors.

There are many ways to boost or direct a wireless signal.

1) The main one is the simplest - If WiFi antenna The router is removable, then you should replace it with a more powerful one.

2) A quick or economical way is to use the reflective properties of foil (metal) materials.

Here you can even use empty beer cans, which in skillful hands turn into high-efficiency antennas.

Solving problems with weak WiFI network adapters

In many devices including both desktop computers or mobile netbooks, manufacturers often provide very cheap network adapters. They are mainly designed to work with a stable signal.

To do this, as an option, for example, you can replace the built-in WiFi card with a more suitable one and with the ability to connect an external antenna. Then you (in emergency situations) it will always be possible to connect an external antenna to your computer (netbook, laptop, etc.) and receive a signal from a Yota router located at a fairly distant distance.

WiFi repeater. Adding Yota router coverage

If the main task is to receive a signal from a remote managed network no matter what, then as an option this network can be extended, lengthened.

1) Remember that all wireless devices have multiple channels. Therefore, remember that on different channels there may be different quality signal reception.

How to change the router channel? - To do this, you need to enter the router configuration and change the WiFi channel. Look for the best channel, save the settings and don’t worry - the settings of your computer, laptop, etc. will not change. Only the program settings change.

2) If possible, you can reduce interference from refrigerators and other radio devices

3) Update all network firmware drivers

4) If possible, try to choose wireless network equipment from the same manufacturer.