Zyxel Keenetic Lite 2, as well as connect it correctly and check the functionality of the configured network. The technical parameters of this will also be given. network device and its capabilities. All this will allow you to get the most out of this router from one of the best manufacturers.

For which solution segment is this network device released?

This network device is aimed at creating compact computer networks. Moreover, the wired part of such a network can include only 4 devices. But support for IPTV technology allows you to connect the appropriate set-top box to it and be able to watch television channels. Another important feature of this model is its support for SmartTV technology and the ability to use it to watch movies and other programs. In turn, the wireless segment of such a network has an increased coverage area (up to 20 meters) and 2 times the information transmission speed (in this case, the value is limited to 300 Mbit/s). Another important feature of this router model is the simple and truly intuitive Zyxel Keenetic Lite 2. For dummies, everything will be described in detail below.

Technical plan router parameters

The technical characteristics of this network device are as follows:

Supported wireless technology 802.11. Moreover, the router is capable of exchanging data with three of its modifications, which are designated n, g and b. The first of them can, according to the documentation, provide even 300 Mbit/s in the wireless segment.

It is possible to create a wired segment of a local area network. The maximum number of devices in this case can be 4, and the speed can be 100 Mbit/s.

It is possible to connect an IPTV set-top box and watch television channels.

Configuring the Zyxel Keenetic Lite II router can be done using the web configurator, which has a simple and intuitive interface, and also allows you to configure the software component of the network device as quickly as possible.

What's included in the package?

The scope of delivery in this case includes the following:

Router Zyxel Keenetic Lite II.

Settings, description, characteristics, etc. important information information about this device is provided in the instruction manual.

Meter wire for setting up the router.

Direct current.

Warranty card.

CD with a set of drivers for different versions operating systems And electronic versions complete documentation.

Where is the best place to install the router?

Before setting up the Zyxel Keenetic Lite 2 router, you need to choose the right place to install it. In this case, the following requirements are put forward to him:

There should be an outlet nearby to organize the power supply to the network device.

The cable from the provider should reach this location without problems.

The router itself should be as close to the center of the coverage area as possible. This will allow you to get a high signal level almost everywhere.

There should be no metal objects or surfaces near the router installation site. Failure to comply with this condition will result in the range of the wireless part local network will decrease.

The network device housing can be in either a vertical or horizontal position. But the antennas must only be in a vertical position. This will allow you to get the maximum possible Wi-Fi coverage area.

Setting up a personal computer to connect to a network

At the first stage, you need to correctly configure the network connection of your personal computer. Therefore, we perform the following manipulations:

You need to go to this address: Start → Control Panel → Network Management → Adapter Settings.

In the network card settings window that opens, select “TCP/IPv4” and open it.

All checkboxes must be set to automatic receipt addresses from the router.

Switching

The next step in how to configure the Zyxel Keenetic Lite 2 router is switching the router. It is performed on completely switched off equipment that is part of the network, and consists of the following manipulations:

We screw on antennas for organization wireless network.

We install the power adapter of the network device into a power outlet, and the wire from it into the router.

We assemble the wired part of the network. We connect the wire from the provider to the port labeled “Internet”. To the ports " home network» with numbers from 1 to 4 we connect internal network devices (IPTV set-top box, TV with SmartTV function, computer and other devices). One must be connected to the network through them Personal Computer or a laptop, with the help of which the software parameters of the router will be adjusted.

Software configuration of the router

Then it executes software setup router. It includes the following actions:

We check the correctness of the previously assembled circuit. We turn on the router and computer. We wait for each of them to finish loading.

We launch the browser on the computer. In the line for dialing network addresses, enter “My.Keenetic.Net” and press the Enter key.

After these steps, a window will appear asking for a username and password to access the router’s software parameters. In the first of them we type admin, and in the second - 1234. After that, press the “Enter” button.

In the window that opens, select “Web Configurator”.

Then you will need to change the administrator password in the new form, which must be entered in two different fields and confirm the changes made.

Then at the bottom of the interface we find the “Internet” item and go into it. Next, select the item called “Broadband connection”. In the form that opens, you need to set the following parameter values:

1. Check the box next to the input port (to which the provider cable is connected) and the port for connecting the IPTV set-top box. Similarly, check the “Enable” and “Internet access” checkboxes.

   The network ID must be 2.

   The parameter setting should be “Automatic”.

   In the "MAC address" drop-down list, the "Default" value must be selected.

   Set the MTU size to 1500.

We save these parameters using the “Apply” button.

Go to the bottom of the interface to the “Home Network” item and set the following parameters:

1. Leave the IP address and subnet mask unchanged.

   Enable using the checkbox (this will allow new devices to automatically receive network addresses).

   We set the starting network address at our discretion, for example 192.168.1.18.

   We also set the address pool at our discretion. For example, 50.

   Click the “Apply” button.

At the next stage, go to the “Wi-Fi Network” tab and set its values:

Set the network name at your discretion.

We set the wireless network key in the same way.

We leave the remaining parameters unchanged.

After this, you need to click the button labeled “Apply”.

Go to the “Security” item at the bottom of the menu. Move to the “Yandex. DNS". Uncheck the box next to the “Enable” option.

Close the browser window after checking.

Checking that Wi-Fi is configured correctly and is working properly

This, in fact, completes the software configuration of the Zyxel Keenetic Lite II 2 router. After this, the wired network is already functioning successfully, provided correct settings devices. But the wireless part needs to be checked. To do this on any affordable smartphone or tablet in the settings we find the item “Wireless networks”. We find in it the item responsible for Wi-Fi operation and launch it in scanning mode.

When finished, a list of available networks will appear. We find the one that is ours. We connect to it and when prompted, enter the access key. After that, close this window, launch the e-mail client and check for new letters on email box. If everything is done correctly, the list will be updated. Otherwise, we look for errors in the settings of the router or mobile device.

Opinion of owners and current price of the router

The review indicates that this is one of the best routers in its class. Its price today is 4,500 rubles. Reviews also highlight its support for such popular functions as IPTV and SmartTV. It is due to their support that the hero of this review stands out from the competition.

Summary

Within the framework of this material, not only the algorithm of how to configure the Zyxel Keenetic Lite 2 router, but also other important information about it was described step by step. These include technical parameters, equipment, and preparation of the computer for network connection, and switching, and testing the computer network, and checking its performance. Otherwise, it can be noted that this router is excellent for creating a home network. It can also be perfectly used for implementing small office networks.

Setting up a router after purchase is not an easy process for the average inexperienced user, so we present to your attention detailed instructions, with which setting up Zyxel Keeneticlite Lite 2 can be simplified as much as possible. And the process will be successful on the first try. So, now let’s move directly to the instructions for the network from Zyxel, having first considered some features of this device. What is this router?

Appearance

Externally, the router looks extremely presentable: a rectangular case made of black plastic, which assumes a horizontal position on the table, which is extremely convenient compared to the vertical one, in which routers, even with a slight shake of the table, often tip over with their front side on the table. There won't be such a problem here one hundred percent.

Most of the upper surface of the body is textured with matte stripes that imitate ripples on the water. Only the lower right quarter, on which the power button is located, is left glossy. On the front edge, facing directly to the user, there are light indicators for power, local network connection and Internet cable. On the reverse side there are ports for connecting cables and two symmetrically located antennas.

Connection

Connecting Zyxel Keenetic Lite 2 is of paramount importance. The power supply running from the network is always connected first, then the Internet cable and the local cord connecting the router to the computer. Then we turn on the router itself by pressing the button on the top surface; after a couple of seconds, the power and connection to the telephone network indicators should light up.

Zyxel Keenetic Lite 2 router: setting up a network card

Next, we need to make sure that our local connection is working properly. Go to the Start menu, select Control Panel. In the pop-up window, click on the line “Network and Internet”. Next, “Network and Sharing Center” shared access", in the left menu of which you need to select "Change adapter settings". All you have to do is select “Local Area Connection” and go into its properties. In the pop-up window you are interested in the lines “Internet Protocol versions 6 and 4”. We open the properties of each of them one by one, where opposite the instructions “Obtain an IP/DNS address automatically” you need to check the boxes.

Now, if you have done everything according to the instructions given, an icon in the form of a monitor with a yellow triangle should appear in the lower right corner of your screen. This indicates that the hardware device is connected correctly. All that's left to do is set up the connection and a couple of additional functions.

Zyxel Keenetic Lite 2: setting up an Internet connection

You have already finished setting up your network card and are ready to start setting up your connection. The first thing you need to do is open your browser (even an old one will do Internet Explorer) and go to the router site. For this purpose in address bar browser is written: “192.168.1.1”.

When you log in, the system will ask you to set a password for Zyxel Keenetic Lite 2. Create it and repeat it twice, apply it.

After you set a new password, you will be asked to log in. By default, the login is admin, and in the password column we enter the one we just created.

Next, at the bottom of the screen we find an icon in the form of a sphere with stripes crossing it, reminiscent of a network, click on it and get to the connection settings section. Select the “PPPoE/VPN” column and click the “Add connection” button.

For Zyxel Keenetic Lite 2, setup occurs by filling out lines in a kind of questionnaire. Here's what you'll have to fill out:

Type (protocol): PPPoE.

Connection via: Broadband Connection (ISP).

Username\password: this is your login\password specified in the agreement with the provider.

Configuring IP parameters: automatic.

Blank fields are only filled in if directly requested by your provider.

Click the apply button. This completes the connection setup for Keenetic Lite 2.

Setting up Wi-Fi Keenetic Lite 2

Setting up a wireless signal for such a device is a necessity.

In the Zyxel Keenetic Lite 2 router, setting up a wireless network is extremely simple. Let's take a closer look at solving this issue.

In the same window, go to the “Wi-Fi” tab. In the selected window with the new “questionnaire” we only need to change a couple of lines, and everything will work. We are interested in the lines Name\Security\Network Key and Channel. The first is the name of your network, visible when connected. The second is a way to encrypt your signal. We recommend choosing WPA2-PSK. The key is also simple - it’s the password for your Wi-Fi, an eight-digit set of numbers and letters. Opposite the “Key” value you can set “Auto”, but if problems arise, you can select a separate channel from the list.

Setting up IPTV for Keenetic Lite 2

This router also gives you the opportunity to use television services without connecting third-party devices. This option is called IPTV. In Zyxel Keenetik Lite 2, setting up this option will only take you a couple of minutes. Go to the "Internet" section, in it - to the "Connection" tab. In the list below there will be a Broadband Connection item. We select it and in the window that pops up, check the boxes next to the items “Enable” and “Use to access the Internet” and set the IP settings to automatic.

Conclusion

As a result of completing all the points in this article, you will be able to connect your computer to the Internet. Of course, the process itself is quite complex, and an inexperienced user is unlikely to cope with all the nuances and steps, but this is precisely why the instructions above were provided to help you.

Over the past year 2013, the Beeline provider has changed a lot regarding connection settings. Now you don’t need to set static routes when setting up an “L2TP client” connection, since the device will receive the routes automatically (via DHCP). True, in some UNIX systems this option does not work, but in “good” routers, like the ZyXEL Keenetic II, everything is implemented as it should. For example, we will show how the setup is done WiFi router ZyXEL under Beeline/Corbina/Vimpelcom, if an L2TP connection is used.

Keenetic devices of the “2” family

Actually, this instruction Suitable for other devices belonging to the Keenetic II family (Giga, 4G, Ultra). It is not necessary to set routes, but you need to remember making the right choice additional parameters. The identification method used in the Beeline VPN tunnel is “CHAP”.

Every model listed here has this option. But in some of them (for example, Giga) you can select the “Auto” value so that the router itself determines which identification to enable. In fact, it is recommended to select “CHAP”, but everything works with “Auto” (tested)!

Do I need to clone my MAC?

The interface of any modern router allows you to change the MAC address. As for connecting to Beeline, it is not at all necessary to use the same MAC - identification is still carried out using a password. However, if you want the “old” IP address to remain with you, then the only way This is achieved by cloning the MAC. Note that if we are talking about a router with gigabit ports, this option is used with caution. There shouldn't be two in the network different devices, having the same MAC addresses, but this requirement must be met only for Giga and Ultra models.

Let's say that when you open the IPoE page of the Giga router, you decide to use the MAC address of the computer:

Cloning MAC, Keenetic Giga

By saving the settings using the “Apply” button, you will receive a non-working wired LAN. What to do next? On your computer, in the network card settings, you need to change the MAC address, coming up with some new value:

How to “tweak” a MAC computer

In Device Manager, find the Ethernet controller, open its properties and follow the instructions in the screenshot. Happy swapping!

Setting up a connection with Beeline

First of all, we note that this covers setting up an Internet connection, and nothing more. It is assumed that you can open the web interface using a PC or a wireless device (it doesn’t matter). The main thing is to go to the web interface, and what to do next is shown in the screenshots. For those who don’t know, we report the IP of the ZyXEL device, as well as the default login and password: 192.168.1.1, admin, 1234.

Setting Ethernet Connection Parameters

So, you have opened the web interface of the Kinetic-2 router. Immediately click on the “Earth” icon and go to the “IPoE” tab:

Start page of the Internet group

• While on the "IPoE" tab, click "Add"

IPoE page, no connection

• On new page set the required parameters as indicated below (MTU=1500, “Enable”, “Direct Internet connection”)

Ethernet connection settings tab

• One checkbox (top) must be placed under the “blue” port, but if a TV set-top box is used, two checkboxes must be placed under the other port
• You can click Apply and the settings will be saved.

In our example, port “1” is selected for the TV set-top box, but you can do it differently. By the way, the set-top box must be turned off while the setup is being performed.

Remember: if we are talking about the Ethernet level, the MTU value is set to 1500. But when setting up L2TP, a different value of 1400 is used.

However, in Keenetic devices of the “2” family this parameter You cannot specify, but you can enable auto-tuning. And on the “IPoE” tab there may be a checkmark marked like this: “Do not reduce TTL.” Don't expose it.

Setting up a connection via L2TP

While in the router interface, you can use the “Internet” -> “L2TP” tab. In some interfaces, the “PPPoE/VPN” tab is available instead, but there is not much difference - make the transition, click “Add”. The following page will appear:

Parameters L2TP, "Kinetic-2"

Let's list how best to set the parameters:

• “Enable interface” – required
• “Description” – any set of characters
• “Connect via” – be sure to select “Broadband connection (ISP)”
• The username and password are set according to the agreement, and the server is currently used: tp.internet.beeline.ru
• Check the "chap" box
• Activate the "TCP-MSS" auto-tuning option.

By clicking “Apply” you will get a working connection. Happy setup!

This is what the tab in question looks like in the interface of another router called Keenetic II Giga:

VPN parameters, "Kinetic-2 Giga"

Please note the following:

• We did not enable "Data Encryption" or "CCP" option
• “Authentication method” is set to “Auto”, but it is better to set “chap”
• “TCP-MSS auto-tuning” is, of course, also enabled.

Apart from the two indicated pages, you do not need to use anything else. After completing the setup, wait for the connection to be established, and then check the Internet availability. For example, open the website ya.ru or Google in your browser.

Setting up the “first” Keenetic Giga

Setting up Internet access in Windows 7

Before setting up the Zyxel Keenetic, plug in the Internet center's power adapter into a power outlet, connect the provider's cable to the router's WAN interface, and connect one of the LAN ports with a patch cord to network card your computer.

Setting up Internet access in the ZyXel Keenetic Internet Center

Settings Wi-Fi connections in the ZyXel Keenetic router

Setting up port forwarding for DC++ in ZyXel Keenetic

Setting up port forwarding (port forwarding) in ZyXel Keenetic is required if you plan to use programs and devices on your home network that require unsolicited access to them from the provider’s network or the external Internet. For example, port forwarding in a router is necessary when accessing IP web cameras from an external Internet network or when working with file-sharing services such as torrent or DC++. The principle of port forwarding is as follows: you independently tell your ZyXel Keeentic what type of unsolicited traffic to the router from outside should be forwarded to a specific IP address of your home network. Let's look at setting up port forwarding in the ZyXel Keeentic router using DC++ as an example.

To configure, click the “Home Network” button, as shown in the figure.




1. The next dialog box registers a permanent IP address for the computer that will use DC++ on your home network. Select your device that appears in the “List of Home Network Devices” table, as shown in the figure.

   
   

2. Check the box next to Permanent IP address and click the Register button.

   
   

3. Write down or remember the registered IP address. Click the Security button, then Add Rule.

   

4. In the new dialog box, fill in the following items exactly as shown in the figure. In the Redirect to address field, enter the address that you wrote down or remembered earlier.

   
   

5. In this example, you specified a rule to forward port 4000 over TCP. For DC++ are used TCP protocols and UDP. For the UDP protocol, perform exactly the same steps, but in the “Protocol” field specify “UDP”, as shown in the figure./div>
   

6. As a result, a window with forwarding rules for tcp/4000 and udp/4000 should appear, as shown in the figure. The port forwarding configuration for DC++ is now complete.

   
   

Setting up IP-TV and multicast in the ZyXel Keenetic router

IP-TV is a service digital television provided directly by the Internet provider. There are two options for using IP-TV via Keenetic: using a set-top box and directly on a computer using special program– VLC, IPTV Player, PC Player, etc. We will look at setting up IP-TV for both cases.

Welcome to my blog!
Nowadays, almost all computer users use a router, even if there is no Internet access, a router will help you create a local network of several computers. But a novice user may not be able to set up a router; it seems like an outlandish box whose settings are impossible to understand. And if you need to set up WI-FI, that’s a whole other story.

I hope this article will help you figure this out and you will be able to configure any router, not just the Zyxel Keenetic Lite II. This is the first article on this blog on setting up routers, so it will be expanded a little to give a little more concepts to the novice user.

I will describe how to configure the Zyxel Keenetic Lite II router and give some tips that may be useful when setting up any routers.

The article is divided into several sections, you can read each of them separately by going through the menu.

Introduction.

If you connect to the Internet through a router, then most likely it distributes the IP address to the computer. If you have an old connection, via telephone line(ADSL), then perhaps you set the IP address manually for each computer. But this method is already outdated and is rarely used, only if there is no technical possibility for modern connection to the network.

Each provider has its own method of connecting (authorizing) a user to the network, here are some of them:

1. Your login and password must be entered when creating a connection.

• Login and password can be entered when creating a network connection.
• The login and password can be entered in the router settings menu.

Authorization occurs with the provider; you do not need to enter anything when connecting.

Which of these options is yours is up to you to decide, and based on this you need to decide how to configure the router.
There are other ways to authorize a user, so check with your provider when connecting.

So, imagine that you have several computers that need to be connected to the Internet. The best solution is to use a router. You connect the network cable to the router, configure it, and it distributes the Internet to all your computers.

Before setting up the router, you need to configure the computer's network card, otherwise you won't succeed.
How to find out your IP address, I already, so those who already know how this is done, you can skip this part, the rest are better off reading.

Setting up a network card.

If the router will distribute IP addresses, then the network card must be configured to accept these addresses. It may already be configured the way you want, but you need to make sure.

To do this, click on the computer icon in the lower right corner and go to the “Network and Sharing Center” menu.

Then click on “Local Area Connection”.

Here, find the item “Internet Protocol 4 (TCP/IPv4)”, click on it with the mouse, and then on the “Properties” button or simply double-click on the inscription itself.

Here in the “General” tab you will see the settings for the IP addresses of your network card. You need the network card to receive an IP address automatically.

After this, you can begin setting up the router itself.

Description of the Zyxel Keenetic Lite II router.

But first we need to figure out what to connect where and how to find out whether our router is working or not, in order to more accurately diagnose in case of problems.

Let's look at the router's display. In the image I have labeled what the indication is responsible for, so if there are problems, you need to look at it first.

Below is a table where I described all the main characteristics of the Zyxel Keenetic Lite II router indicators.

Status indicator (power).

Indicators 0-4 (Connection to network connectors).

WI-FI indicator.

Internet indicator.

Now back panel router.

Everything is signed and clear on it.

Attention!

When you reset the settings using the “Reset” button, all settings will return to factory settings.
All your passwords and logins will disappear, so if you don’t know how to configure the router yourself later, then don’t click on this button. Invite a specialist.

How to quickly connect to a WI-FI network

Big round button on the top panel of the router allows you to quickly disable and enable the WI-FI module, as well as quickly connect subscribers to the network.

Pressing it for 3 seconds turns the wireless connection off and on.

A short press allows you to connect a subscriber, provided that he is waiting for this connection.

Setting up a local network Zyxel Keenetic Lite II.

Now let's move directly to the settings of the Zyxel Keenetic Lite II device.

To do this, connect power to the router and connect it to your network card with a special cable (twisted pair) that comes with it or any other. Then open your browser and go to your router settings.

How to enter the settings of any router is always written on the gadget itself, so before calling support or going online, look at the router from all sides.

As a rule, on the back wall of the device there are instructions for entering its settings. Here, for example, we see the name of the WI-FI network and the password for it, as well as the address to enter its settings menu.

So enter in the address bar:

http://my.keenetic.net or 192.168.1.1

and you will be taken to the router settings menu.

In the first window, click on the “Web Configurator” button.

The next time you log in, you will need to immediately enter your username and password.

After this, you will go to the first settings window, where you will see general information about your connection, such as your IP address and network name.

The Zyxel Keenetic Lite II settings menu has many windows and some of them may not be needed by the average user, so you can just look through them and not bother your head with them. Configure only what you need.

To set up a connection that requires entering a login and password, go to the “Internet” section and open the PPPoE/VPN tab. Here you can configure connections for different providers, for example Domolink or Beeline.

Click on the “Add connection” button and enter your data in the window that opens. To enter the data correctly, you need to read your provider's instructions. The type (protocol) is different for different providers, so pay attention to this.

Setting up a Zyxel Keenetic Lite II wireless network.

On the WI-FI tab, you can configure the router as a client to increase the coverage area.

To set up a point WI-FI access, go to the section “ WI-FI network" Check the box to enable it and enter your details, such as network name and password. Also choose the type of encryption to protect your network.

By default, the router already has the network name and password for WI-FI, written on the back wall, so you can connect to it right away. But it’s better to change this data to your own, it’s easier to remember and it’s easier to protect the network.

Setting up a DHCP server for Zyxel Keenetic Lite II.

The “Home Network” section in the “IP Settings” tab allows you to enable or disable the DHCP server. If it is enabled, then the router distributes IP addresses; if it is disabled, then IP addresses must be manually assigned to each computer and specified in the router settings. Also here you can assign a range of IP addresses for your network, their number and starting address.

Manually assigning addresses increases the reliability of the connection, but it is not very convenient in terms of setting up the network.

Managing Zyxel Keenetic Lite II users.

In the “System” section in the users tab you see all users this internet center, here you can add a new user.

Then select the connector you need and check the box next to it, then save the result.
If you need to change the mac address, then select “Default”, “Enter manually” or “Take from your PC” instead.

Another interesting feature of this router is support for Yandex DNS addresses. They help block access to sites with viruses and prohibited content. This should help you protect your computer from viruses, but practice will tell how well it works.

You can find out more about his work by following this link: http://dns.yandex.ru/

I described only some of the settings of the Zyxel Keenetic Lite II Internet center; you will find them in more detail in the instructions for it, so be sure to read it before connecting.
I hope this article will help you understand its settings.
In conclusion, I want to say that you shouldn’t be afraid to configure routers yourself, there’s nothing complicated about it. There is a window for changing the user password, there is a window for setting up the connection, and there is a window for setting up the wireless network.
The only differences may vary between models appearance these windows, but the meaning of the settings always remains the same.
Over time, new functions appear and the process of setting up a router only becomes easier. So subordinate these pieces of hardware to your needs and everything will be fine.
Good luck!