Quite often, the computer works and works fine, but at one point it begins to noticeably slow down or stops starting altogether. Windows 7 automatically creates restore points if, for example, you install or uninstall a program.

And if, after installing one of the programs, after a couple of days we notice how the computer begins to noticeably slow down, we can perform a system restore.

Exists three main recovery methods: the main one, from under Windows, safe mode, and recovery using the Windows boot disk.

The first method is Normal recovery.

The first option is suitable when the computer turns on, but is stuck. It doesn’t matter how stupid it is, but at least how it works. We go to “Start” and start typing “System Restore” in the search. We click on the shortcut, and the recovery program opens in front of us.

No one should have any difficulties here, the main thing is to choose the right date.

Best to do roll back two days when the computer was still working properly.

The recovery procedure usually takes about 15 minutes.

The second method is Safe Mode

Safe mode involves disabling many services and programs, which allows the OS to start. If in normal mode the computer does not turn on, then we try it: when loading the computer, press F8 and select the “Safe Mode” item there.

The computer turns on without starting many services, but this is enough for us. Now we carry out the recovery option described above and that’s it. The two options are no different.

The third method is Reinstalling the system again

The last method is required only in emergency cases when Windows completely refuses to turn on. Let's take it boot disk Windows 7, insert it into the drive and wait for it to load. The installation window appears new windows, but we don't need it. Below we see the link “System Restore” and click on it.

Search in progress installed systems, the program finds our “broken” OS and launches regular program recovery, which has already been described above. Everything continues in standard mode: we wait until the disk does the recovery and reboot the computer.

Usually, all three of these procedures help almost everyone. For some, recovery may not work because it was disabled or there was not enough disk space. In other cases, a complete reinstallation of the system is usually required.

What programs can be used to make it effective and why is it needed?

Want to spruce up your operating system? Then download and install. Installing cursors will only take you a couple of minutes.

Do you use flash drives to store information? Then information about how to format a flash drive You will find it very useful, especially if you need to format it for the NTFS system.

Good afternoon today we'll talk about how to boot into safe mode Windows . Why is this necessary? Safe Windows mode - This is the “reduced loading” mode. In this mode, only the minimum required to start the computer is loaded. Usually safe mode They are used when the normal one does not load. It may not load for many reasons:

1. Crooked software was installed
2. The driver was not installed correctly
3. Computer hardware has failed
4. Incorrect Windows settings led to a failure
5. and 1000 more reasons why your computer may not boot.

When it doesn't load normal mode , we boot in a safe way to be able to solve the problem that is causing the computer to not boot, for example, delete just installed program due to which the failure occurred, remove the driver, etc. IN different versions operating systems call this mode differently. Let's figure out how.

In order to boot into safe mode When the computer starts, press the button F8 on keyboard. The button must be pressed several times until the following menu appears:

How to boot into safe mode in Windows 7. website

Let's look at which menu items are responsible for what:

• Safe mode — launching safe mode with a minimum set of functions.
• Safe Mode with Boot network drivers — launches safe mode with the ability to go online, that is, you can go online or download programs from the local network.
• Safe Mode with Command Line Support - instead of graphics mode, the system will start on the command line.
• Enable system logging — enables the ability to log all loaded drivers. Using this log, you can determine which driver is malfunctioning and does not allow you to boot the system as standard.
• Enable VGA mode — will start the system in normal mode but with a screen resolution of 640x480, this is necessary in order, for example, to connect another monitor that does not support the resolution that was saved in Windows.
• Loading Last Known Good Configuration (with working parameters) - using this menu item, the system will try to restore its own boot parameters to the “correct” ones, under which the boot occurred without failures. A very useful item, if your system does not boot, then in 50% of cases this item will help you boot.
• Directory Service Restore (Windows domain controller only) - mode in which you can restore the service Active Directory from backup copy if a failure occurs. This mode only works on Windows domain controllers (computer, Active Directory database holder). Typically, such computers are servers with Microsoft Windows Server and are used in the organization. The average user does not need this item.
• Debug mode - V this mode Windows launches the debugger. This item is only necessary for system administrators, to collect information about the failure.
• Disable automatic reboot on system failure — disables cyclic rebooting of the PC; when this item is activated, the system will pause on an error, that is, it will not reboot, but will wait for the administrator’s action. This item is good for identifying Blue Screen of Death (BSOD) errors.
• — restart the computer in normal mode.
• Return to selection operating system — will return you to the OS selection menu, useful if more than 1 operating system is installed.

Sometimes when you press the F8 button, a completely different menu pops up. Some laptop manufacturers put a boot menu on F8, etc. In this case, if another menu pops up, cancel it and immediately continue pressing F8 until the desired one pops up.

How to Boot into Safe Mode in Windows 8

IN Windows 8 The algorithm for entering safe mode has changed and everything has become more difficult. Microsoft claims that entry into Windows via the F8 button is a “surplus of the past”, since almost all new PCs use fast hard drives SSD drive and the user simply won’t have time to press F8 and won’t be able to catch that very moment of calling this menu. The developers also claim that Windows 8“it will determine” when it needs to boot into safe mode. But what to do if this still does not happen?

First way

The first way is to click instead F8, keyboard shortcut Shift+F8. Again, you need to catch this moment. If you still don’t have time, use the second method.

Second way

When the system is running, send the computer to restart by holding down the start button. To do this, press the reboot button while holding it down. Shift key.

How to boot into safe mode in Windows 8. website

Move the arrow to the power button and press while holding the key .

How to boot into safe mode in Windows 8 - reboot.

After that, select additional options.

In the options menu, click on the restart button

After that we need to choose what we want to do. In our case, we press the F8 button to reboot into safe mode.

Third way.

The third method will be effective again when working system. Windows 8 can be rebooted using the command msconfig, the same command was available in previous versions OS.

To do this, in the working system press the key Win-R, in the execute line we type msconfig .

In the window that opens, put a tick safe mode and select the minimum.

How to boot into Windows 8 safe mode - msconfig

After this, we send the computer to reboot. Just don’t forget to set the settings back later, that is, uncheck the boxes. IN Windows XP entering safe mode is carried out by analogy with Windows 7 .

If you have any questions, please ask them in the comments, we will be happy to answer you.

The situation around the enterprise and in the building itself this moment calm / ukrnafta.com.ua

“Security measures have been enhanced due to the risks of commercial activities,” the statement said. “The board of the enterprise asks representatives of the media not to create artificial excitement around the activities of PJSC Ukrnafta, and if questions arise, contact the enterprise in the manner established by the legislation of Ukraine.”

Previously, a number of TV channels in live showed the installation of a metal fence around the perimeter of the Ukrnafta building and announced the arrival of armed fighters of the Dnepr-1 volunteer battalion at the enterprise. A number of people's deputies also observed the situation. Later, information about the presence of Dnepr-1 military personnel was not confirmed. The situation around the enterprise and in the building itself is currently calm.

The conflict around Ukrnafta was a continuation of the situation that happened the day before in the state company Ukrtransnafta. On March 19, the company's supervisory board removed Alexander Lazorko from acting as chairman of the board of Ukrtransnafta. In another decision, the supervisory board elected former SBU employee Yuriy Miroshnik as acting chairman of the board of Ukrtransnafta. Lazorko called these decisions unfounded.

The situation was also commented on by the chairman of the Dnipropetrovsk regional state administration, businessman Igor Kolomoisky. According to him, the Continuum group of companies is behind the scandal surrounding the state company Ukrtransnafta. As Kolomoisky emphasized, Ukrtransnafta is like the blood vessels of the entire system. “If these blood vessels stop working for some reason, the entire complex (of oil refining in Ukraine - UNIAN) will stop,” Kolomoisky said. “And I know those who are interested in them stopping. We have such a thing in the oil products business the “Continuum” group, which is controlled by, I’m not afraid of this word, an organized criminal group, headed by deputy Eremeev (Igor Eremeev - UNIAN) and who is behind all these events.”

Kolomoisky noted that the interest in Ukrtransnafta and, as a consequence, in Ukrnafta is obvious, since the company “is within the sphere of vital interests of the country’s oil refining complex enterprises.” “I’m talking about the only oil refinery - the Kremenchug oil refinery, and about the only large oil producing company in the country - Ukrnafta. This is an enterprise with a mixed form of ownership, where approximately the shareholding is divided 50% to 50% between the state and private shareholders. These are transshipment complexes concentrated in the Odessa region and which are private. And there is a transshipment point “Ukrtransnafta”, which is state-owned. And this whole complex, disparate at first glance, is actually a single organism,” Kolomoisky said.

At the same time, he emphasized that the struggle of the Continuum group in the market bears signs of a cartel agreement and now the group’s management is trying to strike a blow at the oil refining segment. This, according to Kolomoisky, is unacceptable, since it causes damage to enterprises “strategically important for the defense of the country.”

Help from UNIAN. Ukrnafta is the largest public oil and gas company in Ukraine. It accounts for 68% of oil and condensate production, as well as 11% of gas production in Ukraine. The state owns 50% + 1 share in the company's authorized capital.

Ukrnafta owns six regional production divisions (Akhtyrkaneftegaz, Chernigovneftegaz, Poltavaneftegaz, Dolinaneftegaz, Nadvirnaneftegaz, Borislavneftegaz), three gas processing plants (Gnedynetsky, Kachanovsky, Dolinsky), as well as three drilling departments (Akhtyrskoye, Prilukskoye and Prikarpatskoye) and a significant number of other oil service divisions.

Any PC user may encounter problems with Windows work 7. In this case, the malfunction can be so serious that the operating system, in its normal mode, will begin to slow down considerably or even refuse to start at all. Fortunately, there is a surefire way to fix all this, or at least diagnose it and identify the cause of the problem. Of course, we are talking about Windows 7 Safe Mode, also known as Safe Mode. This article is dedicated to him.

Purpose

Before that, it’s worth understanding what, in general, it is and what its purpose is. So, this is a special mechanism for starting the operating system, which uses only basic drivers and services. Simply put, even if some program causes the computer to malfunction, it simply will not turn on in Windows 7 safe mode.

First of all, Safe Mode is used for diagnostics. So, if the computer does not start in normal mode, but works quietly in safe mode, then the cause of the malfunction must be looked for in software, and not in the hardware. Particular attention should be paid to recently installed applications and drivers. By removing such programs one at a time and trying to start Windows normally, you will eventually fix the problem.

Not everyone knows, but Windows 7 safe mode is divided into three types, each of which has its own characteristic features:

• Ordinary. Basic version with a minimum set of programs and drivers. In most cases, this mode will be enough for you to solve all the problems that arise.

• Network enabled. Almost the same as the previous option, but with the ability to use network connections. In other words, if you want to go online while identifying and fixing a problem, then this type of Safe Mode is ideal for you. The problem is malware will also be able to connect to the network, which means there is a chance that they will cause even more harm to your computer.
• With command line support. By turning on this mode, you will see in front of you not the usual desktop, but an interface in which you can only enter special letter commands. This function It will be useful to you only in special cases, so do not use it unless necessary.

Before you start Windows 7 safe mode, it is important to decide which type is right for you at the moment. If in doubt, use the usual one.

Standard launch method

The first method to launch Windows 7 safe mode on a laptop or PC is good because it can be used even before the OS starts. It consists of the following:

• Once the computer turns on, press the F8 key. It is important to do this before the Windows logo appears, otherwise you will have to restart your PC and start all over again. If you are afraid of missing the right moment, you can press F8 several times in a row. Just don't overdo it, otherwise the command simply won't work.

• If you did everything correctly, a menu will appear on the screen with the ability to select the type of Safe Mode you need. Highlight the option you are interested in using the arrow keys on your keyboard and press Enter.
• Wait until the system loads all necessary services. Typically this process takes no more than a minute, but weak computers it may take longer.

Please note that the Windows 7 safe mode desktop runs at a low resolution. If necessary, you can change this option if it makes it more convenient for you to work.

Login via settings

This method turning on safe mode Windows 7 is suitable for you provided that your operating system starts, but slows down or freezes after some time. To use it, do this:

• Wait for the OS to load and press the Win+R button combination.
• Type msconfig in the line that appears and press Enter.
• A menu with system startup settings will open, in which the “General” tab will be opened by default. Here you need to switch from the Normal Startup option to the Diagnostic Startup option.

• Now go to the "Download" tab. Here you need to activate safe mode (check the box), and then select one of the options (recommended “Minimal”).

After this, all you have to do is confirm the changes made and restart your PC. If you did everything correctly, you will immediately be taken to Safe Mode. Please note that the next time you reboot, the computer will start in normal mode.

Activation via command line

Another way to start Windows 7 safe mode on a computer running the operating system. This is done like this:

• Wait until the OS boots and press Win+R.
• Type cmd and press Enter.
• Now type BCDedit and press Enter again.

• A list of various characteristics of your computer will appear. You need to rewrite (or remember) what is written in the "Identifier" section.
• Next, write “bcdedit /set (ID) safeboot minimal”, replacing (ID) with the data from the section of the same name (the ones you copied in the previous step).
• Close the window and restart your PC.

Whatever it was, this method Recommended for advanced users only. The fact is that to exit Safe Mode, you will have to enter again command line and enter "bcdedit /deletevalue(ID)safeboot". Otherwise, the computer will continue to operate in Safe Mode.

Emergency method

Although quite rare, it happens that you cannot enable Safe Mode using any of the above methods. In this case, do the following:

• Turn on or restart your computer.
• As soon as the Windows logo appears, click on the Reset button on system unit. If you do not have such a button, you can use the power switch (you need to turn it off and then on).

• These actions will be considered by the operating system as a critical failure, so Windows will automatically prompt you to boot into Safe Mode.

Possible problems

When trying to launch Safe Mode, you may encounter some problems. Here are solutions for the most common ones:

• On some laptop models, you will not be able to use the F8 key to launch Safe Mode. In this case, you will need to press the Fn+F8 combination.

• If you have already launched one of the types of safe mode, but see only a black screen with letters in front of you, try pressing Enter or Space.
• Once on the desktop in Safe Mode, you will find that there are no icons on it. To add “My Computer” there, right-click on the table and go to the “Personalization” section. After that, open the “Change Icons” category and select the ones you need. Don't forget to apply the changes.

That, in principle, is all about safe mode in Windows 7. By the way, some of the methods for launching it also work in later versions of the operating system.

Users often encounter a problem when they cannot boot a computer or laptop running Windows 7 not only in normal mode, but also in safe mode. This problem can be caused by a variety of reasons. System and hardware failures often lead to the fact that the operating system cannot boot or spontaneously goes into reboot, or after turning on the PC appears blue screen of death. What to do if Windows 7 does not enter safe mode, how to solve this problem and restore your PC's functionality. In this article we will try to solve these problems.

What is safe mode and why is it needed?

Safe mode in Windows OS (Safe Mode) is a special diagnostic mode of operation of the operating system, which is used to identify and eliminate errors in the OS registry. If you run Safe Mode, unnecessary system components will be disabled by default. In other words, when you turn on a computer or laptop with this option, only the most necessary system components of the device and important drivers will be loaded.

If the PC on which Windows 7 is installed encounters any malfunctions after turning it on, you can try starting the device through safe mode with a basic set of services. After the system boots into Safe Mode, the user can perform the same actions as during normal Windows startup 7.

This download method will help detect the presence of viruses, adware, and spyware in the system that interfere with normal functioning. desktop computer or laptop.

If Windows 7 only boots into safe mode immediately after turning on the PC, this indicates that there is a problem that is preventing the operating system from starting normally. In this case, the reason, as a rule, lies in recently installed software.

To solve the problem, you can try to restore the system. To do this, go to “ Start» - « Control Panel» - « System Restore».

But what to do if a device with Windows 7 not only does not enter safe mode, but does not want to start even in normal mode. Let's try to understand this issue.

Reasons why Windows 7 cannot boot into Safe Mode

As already noted, most often the need to enter safe mode on any version of Windows OS, including the “seven”, is due to the need to scan and check the PC for viruses and the presence of virus software. Of course, if the computer does not turn on in normal mode.

Despite the fact that Windows 7 currently occupies a leading position among all operating systems presented, it cannot be said that this version The OS is the standard of absolute quality. Unfortunately, Windows 7 has many of its own bugs and shortcomings, which affect the stability of your device. Especially if you neglect to install licensed software.

If Windows 7 Safe Mode does not turn on, this problem may be caused by:

• the presence of viral, potentially dangerous software ( viral advertising, software);
• hardware power failure;
• file system damage;
• technical problems.

As a rule, if Windows 7 does not want to turn on in safe mode, according to experts, this problem lies in the presence of “evil” viruses in the registry due to the installation of applications and software from unverified, dubious sources. Most likely, under the influence of spyware modified programs in system files The registry branches that are responsible for entering safe mode have been removed.

How to boot your PC in safe mode

Everyone knows that you can boot your PC in safe mode by pressing the F8 key immediately after turning on the PC. But pressing this key does not always bring up the safe mode menu, which can be caused by a number of problems.

If Windows 7 does not boot in safe mode, there are several ways to fix this problem:

• reinstalling the OS;
• changing the system configuration;
• using special utility AVZ.

The most radical method is complete OS reinstallation. The only thing worth noting is that this option is only suitable if you have at hand removable media, a distribution kit with this version of the operating system. That is, the one that was already installed on the PC. This will require " System restore point" The most recently saved system restore points will open in a special window when this feature is activated.

It is worth noting that if the system has important files, and there is no way to install the system with installation disk, this option cannot be called the best solution Problems.

Sometimes, if turning on the computer is impossible in Safe Mode, you can perform the so-called “knurling” ( system rollback) - a process that is identical to a complete reinstallation of the OS, allowing you to save all previously installed important programs, applications, software. If necessary, you can do backup data, important information on PC.

If you completely reinstall the system, you can restore lost registry data using a utility application, namely System Restore. But you need to remember that using this console is not effective in all cases. To ensure that the OS boot option is restored in Safe Mode, we will need a recovery REG file that is fully compliant with this OS.

The best option that will help if Windows 7 does not want to boot or start in safe mode is AVZ utility, which can be downloaded without any problems from the official web portal. In addition to restoring PC functionality this program will help eliminate various threats, malware on your laptop system or personal computer. To do this, you need to perform the following sequence of actions:

To boot Windows 7 in safe mode, you can also try change OS configuration. At the same time, the main thing is to avoid mistakes in your actions by adhering to the following sequence:

1. Go to the menu " Start", click " Execute».
2. In field " Open"We enter the msconfig command and press the OK button. After which you can see the window that appears “ system configuration", as well as other active tabs at the top.
", after which the line " Safe mode».
3. Check the box " Safe mode", confirm the action by pressing OK.

Now you need to restart your PC and check the functioning of safe mode. To do this, during the reboot process, at the very beginning of the system boot, press ". Now you need to re-enter " system configuration» - «» - « Safe mode" Uncheck the box next to “ Safe mode", click OK.

As you can see, if Windows 7 does not boot in safe mode, you can solve this problem using several of the methods presented above. The main thing is to adhere to the established sequence. If the system continues to be unstable, the computer does not boot in safe and normal mode when turned on, the system reboots spontaneously, perhaps the main reason is technical malfunctions. In this case, qualified specialists will help you troubleshoot the problem after conducting a comprehensive diagnosis of your laptop or PC.

Video on the topic