If in operating system Some problems have arisen that interfere with normal operation of the computer, most users simply reinstall Windows again. It is much easier to roll back (restore) Windows to some previous state when everything worked correctly. It takes a maximum of 20 minutes - and you get a fully working and configured copy of the OS. This article describes how to create a point for later Windows recovery 7.

Benefits of Recovery

Reinstallation is a good option, but it takes a long time. After all, you need to not only reinstall your OS, but also install everything you need on it software and drivers. If you don't have storage media on which you can temporarily dump all the important information, this can be a big problem.

The created Windows 7 restore point allows you to avoid such problems. If your system has been damaged by viruses, if you have connected incorrect drivers or you installed some program incorrectly - you just need to start the rollback process.

To use this feature, users need to know how to create a system restore point. This will be discussed later in the guide.

Creating restore points automatically

Your operating system automatically saves Windows operating states. As a rule, this happens before installing critical updates, complex software with big amount libraries, large-scale changes to the registry, driver updates, and so on.

You can use automatically created points at any time, which are stored for some time. However, if your operating system has been damaged and there are no relatively recent saves, this is quite a serious problem. Rolling back for a whole month and then reinstalling all programs is a long process.

Most often, this problem occurs among those users who, for some reason, have disabled automatic updates systems. In this case, it is recommended to know how to create a restore point for your OS.

Create a return point manually

You can easily create your own restore points using standard Windows tools. To do this, follow several steps in the step-by-step instructions provided:

Wait a while for the new restore point to be created.

What to do if there are no rollback points

If system files your Windows has been damaged and you do not have a single return point, you can try using the “sfc /scannow” command:

This command will check all Windows system files and, if any of them are damaged or missing, replace them with working ones.

In general, if the system is working normally, a restore point should be created automatically when you uninstall a program or make other changes to the system. But sometimes it happens that this function does not work. Therefore, in this article we will look at: - How to create a restore point automatically in two ways. But, before that, let's look at the method of manually creating such a point.

How to create a Windows 10 restore point manually

It's quite easy to do this. To do this, you just need to enter “Creating…” in the “Start” search and select the file:

We have a recovery point file. Let's open it. Select the “System Protection” menu. We look at the very bottom of the window and select the “Create” button. Let's press it. On top of this window we have a window for creating this point. Enter the name of the point, usually put the date of the given day and month, it’s more convenient, and click OK.

We started to create a recovery point.

Our point needs space on drive C. Therefore, select “Configure” (above the “Create” button). The “Recovery Options” window will open, where we will see how much space is allocated for system recovery.

Be sure to check the checkbox above the “Enable system protection” line. Next, we check the disk space. Advice: keep it at 7 percent, but you can do more or less. It all depends on the size of your C drive. The more space you allocate for system recovery, the more points you can create.

Now let's see whether our point has been created or not. To do this, click “Restore”:

How to create a restore point automatically using the Task Scheduler method

Now let's move on to automatic way creating this point. To do this, enter taskschd.msc into “Start” or simply write “Task Scheduler”.

Open the file and follow the following path - Scheduler Library\Microsoft\Windows\SystemRes tore

In the “File” window, right-click on SR and select “Properties”. In the new window, select the “Triggers” menu. At the bottom of the window, click on the “Create” button.

A new window opens where we can select the frequency of creating such points. Advice: create these points 2 – 3 times a week. Therefore, we select “Weekly”.

Then, check the boxes for Monday and Friday and click OK. We can leave additional parameters untouched, because... at the next stage, select the “Conditions” menu (although you can experiment).

In the “Conditions” menu, check the box “Run when the computer is idle” and select 10 minutes. This means that the computer will start creating a restore point only after it has been idle for 10 minutes. In other words, if you are watching a movie, or working with a certain program, the computer will not suddenly start creating a recovery point.

For laptops, you can select “Start on AC power.” Click OK. For various reasons, this program may not work, in this case, consider a special script that will make your computer create recovery points every time you start it, if you are happy with this.

How to create a restore point automatically script

Now we offer you a script that will help you create such points automatically:

For the script to work, the following conditions must be met:

1. You need to copy the script into Notepad or another text editor;
2. Select the “File” menu, then “Save As” and save it with any name (Latin), selecting the .vbs extension. For example script.vbs
3. Select the file type – “All files” (all types) and save the script. Next, create a shortcut to the file by right-clicking on it and selecting – send, then – desktop.
4. Then, press Alt, and while holding this button, drag the file into the “Startup” folder of the “Start” button. Not right away, but you will succeed. Now your computer will start creating similar dots every time you turn it on.

If you have Windows 10, then we do everything as in the article, only after creating a shortcut, we send it to the “Startup” folder. To do this, press Win + R. In the window that opens, paste shell:startup:

A window opens in which we will add our file from the desktop.

Many people don’t really like this method and choose to create a restore point twice a week.

Conclusion:— Windows 10 how to create a system restore point becomes clear after reading the article. Advice: create such points at least 2 times a week. Or better yet, 3, just in case!

https://info-kibersant.ru/tochka-vosstanovleniya-sistemy.html

Original post and comments at

Windows restore points are saved system files of the operating system, which, in the event of failures, can be used to restore the correct operation of the OS. Using restore points, any user can quickly “roll back” their operating system to a functioning state, rather than having to deal with a rather lengthy reinstallation process. In this article we will talk in detail about how to create and work with restore points, how to delete them and restore the operating system using built-in and third-party software.

Creating Windows restore points

Windows OS creates restore points in automatic mode. This occurs during important system updates, driver installations, and installation of various applications that may affect the performance of the system. In addition to this, in Windows any the user can create restore points manually. To do this, follow these steps:

Step 1. Look for the Start menu icon in the lower left corner and right-click on it. In the list that opens, select the item "Control Panel".

Step 2. Select the item “ system and safety", after which we go to the point "Security and Service Center" and already there we find the “Recovery” menu.

You can also quickly find this menu by typing the word “Recovery” in the control panel search.

Step 3. In the window that opens, select the item "Recovery Settings".

Step 4. In the window that opens, go to the section "System protection" and select the item "Create".

Step 5. In the window that opens, just write the name of the recovery point, click on the “Create” button and wait until creation is complete.

Once creation is complete, the recovery point will be ready for use.

How to use Windows restore points?

To restore the system using points, the user needs to follow the following steps:

Step 1. Open Control Panel and select item "Recovery", in the window that opens you need to find the item "Start recovery" and press Further.

Step 2. Find the required restore point and press the button "Further"

Step 3. Confirm with the button "Ready" restore the system from the selected Windows restore point.

It will take some time to restore the system, after which Windows will automatically reboot and return to its original position.

How to delete unnecessary restore points?

To delete unnecessary restore points, you must follow these steps:

Step 1. Open Control Panel, go to section "Recovery", after which we find the point "System Recovery Setup".

Step 2. In the next menu, you need to select the item "Tune":

Step 3. In the menu that opens, select the item "Delete".

Important : this method will delete all restore points on your computer!

After pressing the button "Apply" Windows restore points will be deleted.

Using a data recovery program

Windows restore points are designed to restore the state of the system, so after a system rollback, the user's computer will no longer have programs installed after the restore point was created.

In addition, recovery points will not recover deleted or formatted files, documents, videos and photos.

For these purposes, use special software for recovering lost data RS Partition Recovery, which will help restore all information.

It is used to cancel our erroneous actions when working on a computer, which led to its unstable operation. People who have been using the Windows 7 operating system for many years come to our computer service center for help, and only one in ten knows about restore points and one out of fifty about previous versions of files, but does not know how to use them correctly. Despite the apparent simplicity of using restore points, this function has many features that you need to know. This article provides information based on personal experience author, for example, we will find out why when System Protection is turned on, restore points disappear or are not created at all. How to use a restore point if you are missing Windows startup 7 and much more, I hope we will help you avoid many mistakes.

Windows 7 restore point

When selecting and applying a restore point, you need to know that changes usually affect only system and software settings Windows 7. All programs that we installed after creating the restore point we selected will be deleted.

• For example, if you created a restore point on January 8, and on January 12 you want to roll back to the state of January 8, then select the restore point on January 8 accordingly. All programs installed by you between January 8 and January 12 will be deleted.

As regards your personal data, no changes should occur to them. In this screenshot, you can see that System Protection and creation of restore points is enabled by default only for the C:\ drive. Check your Start->Control Panel->System and Security->System->System Protection.

You also need to know that the point Windows 7 recovery, will not help you recover previously deleted files, but in this case you can use the function Previous file versions, only if for of this disk System Protection was turned on and Recovery options settings item checked Restore system settings and previous versions of files. In this case, Windows 7 System Protection archives users' personal data using shadow copies. You can also see that if you click on the Configure button (top illustration) of the System Protection window, for local disk(C:), a window will appear in which you can see that 10% of the disk space is allocated for disk recovery points (C:). Know that it is better to allocate 15%. The more hard drive space allocated for recovery points, the longer they are stored. If Windows 7 needs to create a new restore point, and there is not enough space to create it, the old one will be deleted and a new one will be created in its place.

Note: if any volume in the operating room Windows system 7 System Protection is enabled, then user data is archived by creating shadow copies and becomes available in Previous versions of files. Shadow copies do not exist forever; space is allocated for their storage on the hard drive, which is regulated in the System Protection settings; as soon as it ends, when new copies are created, the old ones are deleted.

For example, we have System Protection enabled for the C:\ drive, so you and I can use the Previous versions of files function, right-click on the C:\Program Files drive folder and select Restore previous version,

a dialog box will open Previous versions, which will list all available versions previous files. Files can be restored or simply copied, keeping the previous and current versions.

Read the full article Previous versions of files.

When setting up System Protection for volumes storing only your files, you need to select Recovery options paragraph Restore only previous versions of files, since there are no system parameters on them.

If you are worried about saving only personal data, then you are better off using the feature Backing up computer data, this is a separate serious topic, also read it separately.

Windows 7 restore point planned and created once a week, after the same period of time has passed, such points are also called control points.

Windows 7 also creates restore points before installing any programs, and finally, you can create a restore point yourself before installing any application in the System Protection dialog box.
Let's first look at a simple example of creating and using a restore point, and then we'll look at more complex examples.

Created Windows 7 restore point Thus->Start->Control Panel->System and Security->System->System Protection. This dialog box is used to configure and create recovery points. For example, we want to install a serious program ourselves, but we are worried that we might do something wrong, let’s play it safe and create a restore point manually for the C:\ drive on which we will install our program.
Start->Control Panel->System and Security->System->System Protection->Create, then we’ll give our point a name, for example 13.

Next, we install some program, but something went wrong, for example, the application does not start and we decided to roll back using a restore point to a time when the problematic program had not yet been installed on our computer. Go to System Protection and select not Create, but Recovery, then

system file recovery starts, click next and select our recovery point 13, pay attention to the item Show other restore points, if you check the box there, other earlier restore points will open to you.

Warning that the recovery process will not be interrupted before it is completed, we agree, then reboot.

The computer boots and the program we installed is gone. This is how restore points work.

Windows 7 restore point, you can use it if your computer does not boot by resorting to safe mode; it is impossible to create a restore point here, but you can use it to roll back to a stable state of the computer. To get into Safe Mode, you need to press the F-8 key on the keyboard immediately after starting the computer. A menu will open in front of you: Additional boot options: Troubleshoot your computer, then Safe Mode. What would Safe Mode to use a Windows 7 restore point, click Start->Control Panel->Recovery, then System Restore and Start Recovery will load, select your restore point and go ahead.

Important information: If you changed your password after creating a recovery point, prepare for the old one to be returned to you, create a password recovery disk.

Windows 7 restore points By default, they occupy approximately 10%-15% (as I said above) of disk space; you can adjust the disk space allocated for recovery points in the Configure - System Protection window. If a lot of hard disk space is allocated for recovery points, they will be stored for a long time. To delete all recovery points, in this window you need to click the Delete button and all recovery points will be deleted.

How to delete all restore points except the last one? Start->In the search field, enter Disk Cleanup, then select the disk that you want to clean, then go to the Advanced tab->System Restore and Shadow Copies->Clean up.

Why aren't Windows 7 restore points created?

A restore point is a representation of the saved state of a computer's system files. You can use a restore point to restore your computer's system files to a point in time in the past. Restore points are automatically created by System Restore on a weekly basis and when System Restore detects that your computer has changed its configuration, such as installing a program or driver.

Stored on hard drives backups The system image can be used to restore the system in the same way as restore points created by System Protection. Although system image backups contain both system files and personal data, system recovery will not affect user data files.

How to create a restore point?

You can create a restore point manually at any time. What is this for? If you are a fan of installing different programs and utilities, then eventually the system will start to slow down, then by creating restore points, you can always return the system to its original state. Installing new drivers or software updates, cleaning the registry or disk, all this can lead to irreversible consequences. So let's get started by doing the following:

Restore points are retained until the disk space reserved for system recovery is full. As new restore points are created, old ones will be deleted. If you disable system protection (the feature that creates restore points) for the disk, then hard drive All restore points will be deleted. After re-enabling system protection, new restore points are created

To select a restore point in the window System protection click on the button Recovery. In the window that opens System Restore click Further and select a restore point. and click Further

Deleting a restore point

You cannot delete an individual restore point. You can delete either all restore points or all but the last one. Deleting recovery points frees up disk space. When new recovery points are created, disk space is reused

Amount of disk space required for system recovery

Storing recovery points requires at least 300 MB of disk space on each drive that is 500 MB or larger. System Restore can use three to five percent of the space on each drive. As the space fills with recovery point data, the " System Restore» deletes old restore points to make room for new ones.