security code For all NOKIA models, it is included with the phone and is designed to protect the phone from unauthorized use. The default code is 12345. If you have lost or forgotten this code, our service will allow you to find security code Nokia based on IMEI number.

Unlocking Nokia phones.

What is a master code (Unlock code)?

Master code is a sequence of numbers that allows you to unlock (unlock) your cell phone. For most Nokia phones, the unlock code is calculated from the IMEI of the mobile phone. You can calculate the master code (unlock code) for your phone on this page.

What is IMEI and how can I find it?

IMEI (International Mobile Equipment Identity) is an internationally unique number for your phone. You can find it in the warranty card or passport for your phone, under the phone battery, or by entering the combination on your mobile phone *#06# .
Usually this is a sequence of 15 digits, sometimes 17.
This number is very useful if your phone is stolen and when purchasing you can check whether your phone is stolen or not. (check your IMEI with what is indicated in the phone certificate).

When should I use the unlock code?

The unlock code is applied if you entered the phone lock code incorrectly 3 times and it is locked.

When does the master code not help?

The master code will not help if:

Where can I enter the master code?

The unlock code is entered instead forgotten code protection or lock code when your phone requests it.

What phones does the master code work for?

The master code works for the following Nokia models:
Nokia 2100, Nokia 3110, Nokia 3210, Nokia 3310, Nokia 3315, Nokia 3330, Nokia 3350, Nokia 3390, Nokia 3410, Nokia 3610, Nokia 5110(i), Nokia 5130, Nokia 5190, Nokia 5210, Nokia 5510, Nokia 6080 , Nokia 6110, Nokia 6130, Nokia 6138, Nokia 6150, Nokia 6190, Nokia 6210, Nokia 6250, Nokia 7110, Nokia 8210, Nokia 8250, Nokia 8290, Nokia 8850, Nokia 8855, Nokia 8890, Nokia 9110(i), Nokia 9210(i), Nokia 9290, Nokia 3100(b), Nokia 3108, Nokia 3120, Nokia 3200(b), Nokia 3220, Nokia 3230, Nokia 3300, Nokia 3360, Nokia 3510(i), Nokia 3530, Nokia 3590, Nokia 3595, Nokia 3600, Nokia 3650, Nokia 3660, Nokia 5100, Nokia 5140(i), Nokia 6020, Nokia 6021, Nokia 6100, Nokia 6101, Nokia 6108, Nokia 6200, Nokia 6220, Nokia 6230(i), Nokia 6260 , Nokia 6310(i), Nokia 6500, Nokia 6510, Nokia 6590, Nokia 6600, Nokia 6610(i), Nokia 6620, Nokia 6650, Nokia 6800, Nokia 6810, Nokia 6820, Nokia 6822, Nokia 7200, Nokia 7210, Nokia 7250(i), Nokia 7260, Nokia 7270, Nokia 7280, Nokia 7600, Nokia 7610, Nokia 7650, Nokia 7700, Nokia 7710, Nokia 8310, Nokia 8390, Nokia 8800, Nokia 8910(i), Nokia 9300(i), Nokia 9500, Nokia N-Gage (QD).

For which phones does the unlock code not work?

The master code does not work for the following Nokia models:
Nokia 1100(b), Nokia 1101, Nokia 1110, Nokia 1112(i), Nokia 1600, Nokia 2300, Nokia 2310, Nokia 2600, Nokia 2610, Nokia 2650, Nokia 2652, Nokia 6030(b), Nokia 6060, Nokia 6111 , Nokia 3250, Nokia 5300, Nokia 5400, Nokia 5500, Nokia 6125, Nokia 6131, Nokia 6233, Nokia 6234, Nokia 6280, Nokia 6282, Nokia 6630, Nokia 6680, Nokia 6681, Nokia 6682, Nokia 7370, Nokia 7373, Nokia 7390, Nokia E-series, Nokia N-series

Check phone IMEI
Unlock Nokia DCT4, remove operator lock by IMEI number

Thanks to this service, you can find out the security code when you turn on your phone (the so-called secret code) or remove the code on your phone. Owners of phones from the Finnish manufacturer can also find the security code for Nokia and remove it. However, if it says that the SIM is not suitable, then our service will not help restore the SIM card, unfortunately.

Today, a mobile phone is not just a means of communication. This is a multifunctional device, without which it is hard to imagine the average person’s weekday (or weekend) day. Nowadays, a phone can store a large amount of confidential information, the publicity of which is absolutely not interesting to the owner. In this regard, it is often necessary to block the phone, install different codes and passwords. But in the daily routine, you can easily forget assigned passwords. The code itself can also be accidentally installed by an inquisitive child or an acquaintance who sticks his or her nose where it doesn’t belong. This way, not only the phone, but also the SIM card itself may be blocked, after which you will have to rack your brains over the question “how to unlock the phone?” This problem is global, so phone manufacturers often provide a function self unlocking telephones. But before that, you need to figure it out and determine what type of blocking occurred and what exactly was blocked? To this end, we will divide our article into the following points:

1. Rescue a phone blocked by an operator.
2. Unlocking the phone, depending on the manufacturer.
3. Unlocking the SIM card.
4. Restoring the functionality of a phone whose memory has been locked.

And now, in order.

How to unlock a phone locked by an operator?

This type of blocking is used by operators mobile communications for the purpose of making it impossible to use a phone (usually branded) in the network of another operator. If you insert another SIM card (from any other operator), then when you turn on the phone will ask you for a password or unlock code. Then the question arises: “how to unlock a phone code?” The best option, of course, is if you have a fairly loyal operator who will kindly provide you with a code during a call to support. To do this, you will only need to name the IMEI of your phone (a number that is individual for each device, usually you can find it under the phone’s battery). But this perfect option, which is extremely rare. If the operator refuses you, then do not despair, as there are plenty of craftsmen who can unlock your phone using flashing. Detailed manuals can often be found online, so with a sufficient level of knowledge you can do this procedure yourself. But if you are not confident in your abilities and knowledge, then it is better to entrust this work to a specialist. Often, a jailbreak program is used for unlocking, which is supported by such a well-known company as Apple.

Unlocking the phone, depending on the manufacturer's brand

Many modern models phones support the function of protecting the phone using special passwords that the user sets independently. But there is always a risk of forgetting the code you set, which will make further operation of the mobile device impossible. In this case unlock phone You can use the firmware reset function. In other words, this is resetting all phone settings to factory settings. Of course, you will then have to make all the previously installed settings again, but there is no other choice. This type of phone unlocking is different for different manufacturers.

How to unlock a Nokia phone?

For this procedure we will need:

• a computer (or any equivalent: laptop, netbook, tablet) with Internet access;
• USB cable suitable for the phone;
• Nokia PC Suite program, which must first be installed on your computer and (preferably) updated to latest version. You can download it from the official website of Nokia (nokia.ua);
• Nokia Unlocker Tool program, which should also be on your computer.

Next, launch the program, insert the cable into the computer and connect it to the phone. Once your phone is recognized by Nokia PC Suite, you can launch NokiaUnlockerTool. After this, the phone will be recognized by this program. Make a code request and the program should unlock phone. If this method does not help, then contact a phone repair shop or your nearest service center manufacturer of your mobile device.

How to unlock a Sony Ericsson phone?

In the case of phones from this manufacturer, two unlocking methods are possible: using the cable that was included with the phone and using a special service cable. For the second option you will also need additional software(SEMCtool_v8.4 or TMS 2.45 program). If you plan to use the cable from the kit, you will need the WotanClient program, which, unfortunately, is not free. There are also some smartphone models that can be used with the DaVinci client.

How to unlock a Samsung phone?

Phones from this manufacturer are also equipped with an access blocking function using a special security code, which can easily be forgotten... If this is exactly the case that happened to you (or someone else blocked your phone, anything can happen) and you don’t know how to unlock your phone, then install a program called Samsung @ home 9.41 on your computer. With its help you can easily cope with this problem. The functionality of this utility is quite simple, and you can easily understand its settings.

How to unlock your LG phone

With phones from this manufacturer, everything is not as simple as with others. If your phone is locked, you can restore its functionality only with the help of special codes. The difficulty is that each model has its own code, so there is simply no general solution. The only solution is to take your phone either to the store where you bought it (if the phone is still under warranty) or to a specialized service center. Only there they can help you.

Unlocking your phone's SIM card

A small plastic card with a chip in the middle is an irreplaceable device without which a mobile phone is simply useless as such. We are talking, naturally, about a SIM card. The chip it uses, although small in size, allows you to store a certain amount of information, which is often confidential. To ensure the safety of this data, protection technology is also used using the so-called PIN code, which is requested when you turn on the phone. If you enter your PIN code three times unsuccessfully, then mobile device will ask you for another code, the so-called PUK code. It usually consists of eight digits and is provided to you along with the SIM card. If you cannot use your phone because you do not know the PIN code, then simply use the PUK code. If you don’t know it either and it’s not written down anywhere (and the documents from the SIM card are lost, for example), then the first thing you need to do is call the support number of your mobile operator. There they will tell you how to find out your PUK code (you may even be able to find it out over the phone). If there is no way to call, then contact the nearest customer service center, taking with you the SIM card and the phone in which it was used (you may also be asked for a passport). You can look at the numbers of mobile operators in Ukraine, as well as how to quickly contact them.

Unlocking your phone memory

Some phone models allow you to separately block access to various files that are in the memory (either the phone or, most often, additional card memory). In this case, again, a situation is possible when you will not know (or remember) set password and the functionality of the device will be partially unavailable to you. It is very unpleasant when the information you need seems to be at hand, but at the same time is not available to you. To solve this problem, you will have to worry about unlocking the memory card. There is such an option as formatting, which will allow you to quickly resolve the issue of ignorance of the code. But it will not solve the issue of information recovery, since all of it will be destroyed as a result of formatting. Therefore, this option is not suitable for everyone. All other methods that allow unlock phone memory, are based on the use of additional software. To do this, you will need the cable that came with the phone (or was purchased by you additionally) to connect it to the computer, or a card reader ( small device, which will allow you to read information from a memory card by connecting it to a computer separately from the phone). One of the programs that can be used to unlock is JetFlash Recovery Tool. You can download it from the official website of the developers. It can also be used to format a memory card.

The main thing is that you are aware of all your actions and understand perfectly what you are doing. Otherwise, you can simply disrupt the functionality of the phone, which cannot always be restored. So if you don't know yourself how to unlock your phone, perform any other action with it, then it is better to seek help from professionals. But I still hope that you will not encounter such problems and will handle your telephone wisely.

Did you enter the pattern key incorrectly? Is your phone blocked? We'll show you how to unlock it

It also happens that you forgot the pattern key (or you found a phone that is locked using graphic key) and cannot unlock your phone. An unpleasant situation, of course. In this case, as in all other difficult situations, the main thing is not to panic. A couple of minutes, the correct query in the search and you can restore everything yourself. To simplify this procedure, I scoured the Internet and found several videos for unlocking phones from different manufacturers. You can find them below.

1. Video to help you unlock samsung phone Galaxy on its own. To do this, you will have to use ClockworkMod Recovery or, in common parlance, the emergency menu (as well as recovery mode). The only thing you need to worry about is finding out how to enable this very Recovery mode. What I say is all on video:

1. Another video with the same method that allows you to unlock any Android phone:

1. And the following two videos may be useful for those who are trying to understand how to unlock an iPhone without a password (jailbreak):

When enabled, this feature automatically unlocks your screen when at least one of the conditions you specify is met. For example, if the device is located at your home or another device of yours is connected to it via Bluetooth.

You may have previously set up Smart Lock but forgot about it. In this case, remember the given condition and fulfill it. For example, if you have added one of the Bluetooth devices to the list of trusted devices on your smartphone, enable the module on both wireless communication. Once connected, the phone can be unlocked without entering a PIN, password or key.

If Smart Lock has not been configured in advance or you cannot meet the specified condition, then this method is not suitable.

2. Bypass protection using a Google account

Some devices with old Android versions(up to 5.0 Lollipop) allow you to bypass the screen lock using Google account. But for this, the device must be connected to the Network. To check if your smartphone supports this method, enter any password, PIN or pattern five times.

After five incorrect entry attempts, the message “Forgot your password?” should appear on the screen. or similar hint. Click on this inscription and enter the username and password for the Google account that is the main one on your smartphone. After successfully logging in, you can specify a new password or set up a different screen lock method.

If you also forgot your Google account password, try to restore access to it using the company’s special service.

3. Use the service from the smartphone manufacturer

Some brands offer owners of their devices additional tools unlocking. For example, Samsung has a Find My Mobile service, with which you can remove a pattern, PIN, password, and even a fingerprint. To do this, your device must be linked to Samsung account, support the service and be online.

To find out whether such services exist for your model, look for this information in the instructions or on the manufacturer’s official website.

4. Reset the device to factory settings

If other options do not work, all that remains is to return the factory settings. This will lead to the loss of all data, copies of which are not saved in your Google account and others. But you can remove the protection from the screen.

Turn off your smartphone and remove the memory card if it was inside. Then try these key combinations in turn until one of them works (you need to press all the buttons and hold them for about 10-15 seconds):

• Volume down key + power button;
• Volume up key + power button;
• Volume Down key + Power button + Home key;
• Volume down key + Volume up key + Power button.

When the service menu appears on the display, select Recovery item, and then the command Wipe data / factory reset. If none of the key combinations work or you don't see the necessary commands in the menu, look for reset instructions specific to your device model.

After this, the smartphone should return to factory settings within a few minutes. The device may request a login and password from a previously connected Google account, but you will no longer need to unlock the screen. After logging into your old account, the system will restore the settings and data synchronized with it.

All of the unlocking methods listed above are suitable not only for smartphones, but also for Android tablets.

How to unlock iPhone

If you have forgotten the password for your iOS device, you have only one option - reset to factory settings. You can do it in two ways: using iCloud and through iTunes. The first one will only work if you previously enabled the Find My iPhone function on your smartphone. For the second you will need a USB cable and a computer with installed program iTunes.

In both cases, you will not only delete the password, but also all data from the device. But if you have a backup copy iPhone, then after the reset you can restore the information saved in it: calendars, contacts, notes, SMS, settings and purchase lists in iTunes and App Store. Personal photos and videos will also not be lost if you previously synchronized them with your computer or iCloud.

1. Reset iPhone to factory settings using iCloud

To check if Find My iPhone is active on your smartphone, connect it to the Internet. Then log into your Apple ID account on the iCloud website using your computer and click on the “Find iPhone” icon.

If you don't have a computer at hand, but have an iPad, iPod touch or another iPhone, you can use standard application“Find iPhone” on any of these gadgets. It works the same as the web version in iCloud.

If Find My iPhone is active, you'll immediately see your locked iPhone (in the app) or select it from the All Devices list (on the iCloud website). If the device is not displayed, proceed to the second method. Otherwise, continue.

Click on the smartphone icon, and then on the “Erase iPhone” button and follow further prompts.

This will remove your passcode and all data from your device, allowing you to set up your iPhone again.

2. Reset iPhone to factory settings via iTunes

Run on computer iTunes, then connect your smartphone to it using a USB cable.

If you have previously synced your iPhone with this computer, click on the smartphone icon in iTunes. In the menu that opens, perform synchronization again and create a fresh one backup copy devices on the computer. Then click “Restore from copy...”, select the newly created image and follow the system prompts until complete recovery.

If you've never synced your iPhone with current computer or iTunes also asks for a password, then most likely it will not be possible to create a new backup. But you can do a reset in a special mode, and then restore the device from old copies (if any). Follow these steps to reset:

1. Force restart your iPhone.

On iPhone SE, iPhone 6s, iPhone 6s Plus, and older models, hold down the Home key and the top (or side) button for 10 seconds or more until the recovery screen appears.

On an iPhone 7 or iPhone 7 Plus, hold down the Side key and the Volume Down button for 10 seconds or more until you see the recovery screen.

On an iPhone 8 or iPhone 8 Plus, hold and immediately release the volume up key and then the volume down key. After that, press and hold the Side button until the recovery screen appears.

2. When the recovery dialog box appears on your computer display, click “Restore” and follow the iTunes prompts.

3. If the iPhone exits recovery mode while iTunes is downloading the necessary files from the Internet, press and hold the force restart buttons again until the device returns to this mode.

Although the instructions for both reset methods are based on the iPhone, they will also work if you suddenly forget your iPad password.

In cell phones" Nokia"There are several types of blocking: blocking the phone for the operator, blocking the SIM card, and blocking the phone memory. When unlocking the protective code each type must be followed a certain sequence actions that provide unlocking in case of loss of protective code.

Instructions

When the phone is locked " Nokia"under the operator, you should contact the cellular operator under which the phone is locked. This type of blocking exists to prevent the use of the phone in the network of an operator different from the original one. When contacting the operator, request an unlock code that will allow you to talk by inserting another SIM card If you are unable to get the unlock code, you will need to flash it.

When blocking a SIM card, pay attention to the SIM card. It should contain a PIN code and a PACK code. If you have forgotten your PIN code, enter the one indicated on the card. Otherwise, enter the pack code, which will allow you to reset your forgotten PIN and enter a new one. If these attempts fail, contact your operator's service center to get a new duplicate card of your blocked SIM card.

If your phone is locked, you will need to reset all phone settings, reset the firmware, or reflash the phone. To obtain special codes for settings failure or firmware reset, contact the service center. Please be aware that when using these codes, all your personal data may be erased. To flash your phone, use Step No. 2.

Pin- code is an analogue of a password that is used to authorize the SIM card holder when turning on the mobile phone. The owner is usually given several attempts to enter the security code A. If they were entered incorrectly, the SIM card is blocked. These are the basics of use mobile phone, which are known to every owner. In addition to pin code and there is another password - Security Mastercode, which blocks access to some functions. Therefore, situations when you need to remove the protective code, are very common.

You will need

• Nemesis Service Suite
• Nokia Unlocker
• Drivers for USB cable version 6.85
• Cable CA - 53

Instructions

To remove the protective code(pin- code), do the following (using an example). Go to the menu and select “Tools”, then “Settings”. Select the "Security" - "Phone and SIM" option. In the list of settings that appears, select “Request code and PIN" - disable.

If you purchased Nokia phone hand, over time it may well turn out that some of its functions and settings are blocked by an additional digital password that you do not know. To remove the protective code, go to the website http://nfader.su/. Enter the IMEI of your device in the special field and confirm by checking the box that you are the legal owner of the phone. After clicking the Generate button, you will see the Security Mastercode of your device in a special field.

If this does not help, follow the following procedure to find and remove the protective code:
Uninstall the Nokia Connectivity Cable driver and restart your computer and install driver version 6.85. Restart your computer again.
Launch Nokia PC Suite and connect your phone via cable in PC Suite mode. Wait for the phone to be recognized by the program, then close PC Suite, unloading its icon from the system tray around the clock.
Install NSS. When you run it for the first time, you will be prompted: Please select from the following Service device you will be using after the installations. Select Virtual USB device-.
At the top right, click the button with a magnifying glass ( Scan for new device). Select Phohe Info and then in the new tab - Scan. On the left you will see the information Phone version and Phone IMEI.
Go to the Permanent Memory tab, check the To File checkbox and click the Read button. Wait for the process to complete. The result will be saved in a file with the *.pm extension.
Launch NokiaUnlocker. Select the path to the *.pm file and click the “Define” button. At the bottom of the window you will see code blocking.

The issue of unlocking a Nokia phone is often faced by owners who have forgotten their security code. A security code is one of the very first ways to protect a user’s personal data from unauthorized access. However, as practice shows, in most cases this code successfully protects information from the owner of the phone, who accidentally managed to forget it. In this article we will look at several methods that should help you remove the lock and return your phone to working condition.

Even before the user begins to carry out various manipulations with his phone, we recommend contacting a salon cellular communications, where the gadget was purchased. In this way, you can save yourself from further red tape that may arise in the event of an incorrect reset or flashing. If this method is not for you, then welcome!

How to unlock Nokia Lumia

Today, Nokia Lumia series smartphones running on Windows Phone OS are quite popular. The great excitement around these models is caused by the ease of working with the mobile version of Windows and the company’s very reasonable pricing policy. As for unblocking Nokia Lumia, then everything is quite simple here. All those actions that were performed with smartphones of younger models are no longer relevant, the only correct solution is to reset the settings or. Depending on the version of Windows Phone you have installed on your smartphone, these steps may vary slightly. It should be especially noted that all information stored on the phone will be permanently deleted.

Reset settings on Windows Phone 8.X

If you doubt your ability to unlock your phone, it is better to trust the services of the service center.

Often when changing removable panels phone Many people come to the conclusion that it is no longer possible to assemble the device. Taking this fact into account, before changing the telephone panel yourself, you should know how to remove cover With phone and the panel itself for its subsequent replacement.

You will need

• Cell phone, replacement panel, kitchen knife.

Instructions

To begin, sketch out the back profile of your phone. This is necessary so that during subsequent assembly you do not get confused with the location of certain screws. Drawing a diagram phone, you can start removing its panel. To do this, remove the rear cover, remove the battery from the device.

Disassembling the panel. After you remove the battery from phone, you will have access to the screws that secure the panel. They should be unscrewed one at a time (given their small size, the tip of a kitchen knife is ideal as a screwdriver). After unscrewing one screw, mark its location on the previously drawn diagram and place it in the appropriate place in the drawing. Unscrew all the screws in the same way, after which you can remove the panel itself.

In addition to the screw fastening of the panel, it is also secured by plastic couplings of the product itself. In order to remove the old panel, rid it of the old couplings (carefully inspect the body to understand how the panel is attached to it).

Video on the topic

Sources:

• how to change iPhone panel

To remove code blocking from cell phone phone, you need to perform certain actions in the electronic menu of the device. In general, everything is completed in 1-2 minutes.

You will need

• Cellular telephone.

Instructions

Many cell phone owners, believing that setting a password on the product can protect the device from theft, set all kinds of passwords on their mobile phones. So, a password can be set for access to contacts, SMS messages, and the phone in general. That is, except for the owner phone, no one will have access to these sections and the device. However, this is not the case. If desired, the phone can be unlocked using special software. However, in this article we will not touch on such a topic. Let's talk about how you can put code blocking on the phone and remove it if necessary.

Installation code A blocking on the phone and its removal. You can set a password for phone by going to the appropriate section in the menu. To do this, open the settings phone, then go to the “Security” folder. Here you can set your PIN code for a SIM card, and also set code blocking on the device itself and some of its sections. If you wish to withdraw code blocking, select the appropriate action. To disable the password prompt, you must enter a valid password when deactivating it. code in the opened field. If you entered the correct code, the phone will be unlocked. If you made a mistake when entering your password, the device will notify you about it.

Video on the topic

Sources:

• removing phone lock code

When installing the operating system, you set a password to log into your account. After some time, the need to constantly enter a password every time you turn it on computer It’s starting to make you very angry, especially since you don’t need the password at all and now you want to remove it. It's not at all difficult to do this.

You will need

• Personal computer, internet

Instructions

You need to go to “User Accounts”. In Windows 7 this is done as follows. Click the “Start” button on the taskbar. In the window that opens, click the “Control Panel” button.

In the control panel, click on the “User Accounts” button. Next, a window will open in which click on the “Change Windows password” button. In the window that opens, click “Making changes to account user". Next, click on the “Remove your password” button.

=======================

If the phone asks you for a password before turning it on and you can’t connect it to your computer, then try to get the lock code.

===================================

This question is often asked by users of Nokia phones on the BB5 platform, since it is most often forgotten or sometimes happens when they bought it second-hand and a security code has already been installed, but it is unknown. A security code is set when they want to block some data from being viewed by unwanted people, such as children or classmates. But what to do if you forgot this code or didn’t know it at all? Of course, there is another option to go to the service center and they will tell you this code, but it is clear that for some symbolic amount of money) But you can do it completely free of charge and at home.

I will not describe all the methods that exist in this regard (via JAF, Phone Unlock, NSS and Nokia Unlocker), but I think the method through the Mbro USB Nokia Tools Lite program is the simplest and easiest in this matter. You just need to install the program and click a couple of times with the mouse. Below I present the method itself with screenshots of how all this should be done.

1. First, download the program itself Mbro USB Nokia Tools Lite and unpack it. We launch the program and see the following window:

2. We connect your in PC Suite mode

4. After this, we see the program window, where in the last line we see our treasured security code. We rewrite it and save it if we do not change it in the future, or we immediately enter it and check it.

For many years now, a mobile phone has been viewed not as an expensive toy, but as an essential thing in everyday life. And therefore, any malfunction of the device can not only cause negative emotions in the owner, but also cause disruption to the work process, etc., and this is no longer a joke. No one, even the coolest brands and models, is immune from such misunderstandings.

For example, the mobile phone was stuck on lock: the security code was forgotten or they didn’t know it at all, if the phone was second-hand, bought second-hand, and the new owner did not bother to ask for the necessary numbers. The company is known and loved by many Nokia. How to remove Nokia lock code? People who have encountered a similar problem know that the problem is fixable, although sometimes you have to tinker.

So, to remove Nokia lock code at home, you can use at least two options.

Option one: the “scientific” poking method.

1. If the mobile phone turns on, it should be connected to the computer via PC Suite. Then it will be possible to remove the Nokia security code if it is requested immediately after turning on the device.
2. You should download the JAF Setup utility; the drivers for it will fit from any boot disk from Nokia.
3. Turn on the phone, find what its resistance is. It may vary for different models.
4. Next you will need two small, 30 centimeters each, wires and two ordinary sewing needles.
5. The whole structure is connected in this way: needle, wires, resistance, wires, needle. The sequence must be strict! A power supply of 3.6 to 4 V is connected. The connection is made to the + and - buses, or the BSI contact is isolated from the battery contact. Those 2 needles are inserted between the battery contacts Cnd and BSI. Next, press the power button on the phone. The device itself should not twitch or vibrate so that the needles do not fly out. A few seconds after turning on, the display should indicate with an inscription like “local mode” or “Test mode” that the experiment was a success.
6. Next, use a USB cable to connect the phone to the computer. The latter should detect Nokia as turned on and working normally. We install drivers through the computer. Next, you need to install the JAF program, open it and click “start”.
7. The next step on how to remove the Nokia lock code is to go to the bb5 tab. There, next to the Read User Code item, check the box and click on Service. When a new dialog box appears, click on the “Read Code” item.
8. When the operation is completed, the program itself will write the device code to the left of the button
   Read Code.

Note: this method is good for mobile phones created on BB5 platforms.

Method two: “software”

This method is also used at home, although, of course, they know how to remove the Nokia lock code in workshops at cellular communication stores. But contacting them costs time and money, and you can do everything yourself quickly and free of charge, which in itself is beneficial.

So, another way to “revive” is using the Mbro USB Nokia Tools Lite program. It is useful if the phone asks for a password before turning on, and therefore cannot be connected to the computer. Then you can try to get the lock code this way:

• The program needs to be installed, unpacked, and launched.
• Then connect the phone via PC Suite.
• Move the cursor over the button with the microphone and click on it.
• In the program window, in the last line there is the very security code that was needed. It should be entered into the phone to check its functionality. And, besides, it’s better to write down the code so that later you don’t have to fight with the phone again.
• This method, which tells you how to remove the Nokia lock code, as well as the password, is suitable for those phones that turn on completely. The program itself works on computers that have Winows7 as the operating system. And as phones, respectively, smartphone models Nokia N79 and

In the end, the phone can be formatted if other options do not work. But this is an extreme case. Although, then you can completely update the software, install a different, more interesting operating system, various utilities and ultimately get a new model, even more advanced - as long as the filling “pull”, i.e. "insides" of a mobile phone.

In cell phones" Nokia"There are several types of blocking: blocking the phone for the operator, blocking the SIM card, and blocking the phone memory. When unlocking the protective code of each type, you must follow a certain sequence of actions to ensure unlocking in the event of loss of protective code.

Instructions

When the phone is locked " Nokia"under the operator, you should contact the cellular operator under which the phone is locked. This type Locks exist to prevent the phone from being used on a different operator's network than the original one. When contacting your operator, request an unlock code that will allow you to talk by inserting another SIM card. If you are unable to get the unlock code, you will need to flash it.

To flash your phone, you will need a data cable, drivers and synchronization software, as well as flashing software and the actual firmware you plan to use. Firmware is the software that is responsible for the full functioning of cell phone. Synchronize your phone with your computer using a data cable, then upload the firmware. Be sure to fully charge the battery before starting the operation, and also back up all personal information on computer.

When blocking a SIM card, pay attention to the SIM card. It should contain a PIN code and a PACK code. If you have forgotten your PIN code, enter the one indicated on the card. Otherwise, enter the pack code, which will allow you to reset your forgotten PIN and enter a new one. If these attempts fail, contact your operator's service center to get a new duplicate card of your blocked SIM card.

If your phone is locked, you will need to reset all phone settings, reset the firmware, or reflash the phone. To obtain special codes for settings failure or firmware reset, contact the service center. Please be aware that when using these codes, all your personal data may be erased. To flash your phone, use Step No. 2.

Pin- code is an analogue of a password that is used to authorize the SIM card holder when turning on the mobile phone. The owner is usually given several attempts to enter the security code A. If they were entered incorrectly, the SIM card is blocked. These are the basics of using a mobile phone that every owner knows. In addition to pin code and there is another password - Security Mastercode, which blocks access to some functions. Therefore, situations when you need to remove the protective code, are very common.

You will need

• Nemesis Service Suite
• Nokia Unlocker
• Drivers for USB cable version 6.85
• Cable CA - 53

Instructions

To remove the protective code(pin- code), do the following (using the example). Go to the menu and select “Tools”, then “Settings”. Select the "Security" - "Phone and SIM" option. In the list of settings that appears, select “Request code and PIN" - disable.

If you purchased a Nokia phone secondhand, over time it may well turn out that some of its functions and settings are blocked by an additional digital password that you do not know. To remove the protective code, go to the website http://nfader.su/. Enter the IMEI of your device in the special field and confirm by checking the box that you are the legal owner of the phone. After clicking the Generate button, you will see the Security Mastercode of your device in a special field.

If this does not help, follow the following procedure to find and remove the protective code:
Uninstall the Nokia Connectivity Cable driver and restart your computer and install driver version 6.85. Restart your computer again.
Launch Nokia PC Suite and connect your phone via cable in PC Suite mode. Wait for the phone to be recognized by the program, then close PC Suite, unloading its icon from the system tray around the clock.
Install NSS. When you run it for the first time, you will be prompted: Please select from the following Service device you will be using after the installations. Select Virtual USB device-.
At the top right, click the button with a magnifying glass (Scan for new device). Select Phohe Info and then in the new tab - Scan. On the left you will see the information Phone version and Phone IMEI.
Go to the Permanent Memory tab, check the To File checkbox and click the Read button. Wait for the process to complete. The result will be saved in a file with the *.pm extension.
Launch NokiaUnlocker. Select the path to the *.pm file and click the “Define” button. At the bottom of the window you will see code blocking.