The need to reset your iPad to factory settings may arise in various situations. For example, a reset may be necessary in case of software failures or when selling the device. In this article we will look at three ways to reset your iPad to factory settings.

But first, a few words about safety. Before resetting your iPad, you need to check its battery level. It needs to be charged at least 30 percent, or better yet, 100 percent. Because turning off the device while resetting the settings can lead to damage. It is also advisable to make a backup copy before resetting. using iTunes. This will allow you to restore everything if you change your mind. And if you have a jailbroken iPad, then it is better to avoid resetting the settings altogether, as this may lead to loading problems.

If you want to reset your iPad to factory settings, the easiest way is to use the corresponding function in Settings. For this you you need to go to iPad Settings and go there to the “General” section.

This will take you to a section with settings related to resetting your iPad. The following functions are available here: Reset all settings, erase content and settings, erase network settings, reset Home button settings, reset keyboard dictionary, reset geolocation settings. If you want to reset your iPad to factory settings, then “Reset all settings” or “Erase content and settings” will suit you. Select one of these features and follow the instructions that appear on the screen.

• "Erase all settings" function leads to deleting iPad settings. All settings are returned to factory defaults, while your data remains intact. This function is suitable if you have any problems with the settings. For example, something freezes or does not work as it should.
• "Erase content and settings" function- This full reset iPad to factory settings. When using this function, all settings will be returned to factory defaults, and user content that was on the iPad will be deleted. This reset option is suitable if you plan to sell your iPad or simply give it to another person for use.

Reset iPad via iTunes

You can also reset your iPad to factory settings using iTunes. In this case, first you need to disable the Find My iPad feature. To do this, go to iPad Settings, open the “iCloud” section and disable the “Find My iPad” function there. It should be noted that to disable this function you will have to enter the password for . Without this, you won’t be able to disable iPad search and reset settings via iTunes.

After disabling the Find My iPad feature, you can begin resetting your iPad to factory settings. To do this, launch iTunes on your computer and connect your iPad to your computer using a cable. After connecting the iPad, Click on the device icon that appears in the upper left corner of the iTunes window.

AND Click on the “Restore iPad” button there. It should be noted that next to it there is also a “Restore from copy” button. This button is responsible for restoring the iPad from a previously created backup copy and has nothing to do with a factory reset. Therefore, do not confuse the “Restore iPad” and “Restore from a copy” buttons.

After clicking on the “Restore iPad” button, a small window will open asking you to confirm resetting the iPad to factory settings. In this window you need Click on the “Restore” button again and then iTunes will begin the process of resetting your iPad.

Reset iPad via iTunes without password

If you have forgotten your Apple ID password, then the instructions described above will not work, since you simply cannot disable the Find My iPad feature. If you find yourself in such a situation, then you can try resetting your iPad to factory settings using Recovery Mode.

Entering Recovery Mode is quite simple. For this you need to do the following:

1. Turn off the iPad and wait a few minutes for all programs to finish their work and the iPad to turn off completely;
2. Press the “Home” button and without releasing it, connect the iPad to the computer using a cable;
3. You need to hold the Home button until the iTunes program icon and cable appear on the iPad screen;
4. After this, you can release the Home button; you have successfully entered Recovery Mode.

After enable Recovery Mode you need to launch iTunes on your computer and click on the “Restore iPad” button. This way you can reset your iPad to factory settings without your Apple ID password.

If you need to exit Recovery Mode without using recovery, simply press the iPad's power button and hold it until it starts to boot.

operating system iOS makes it possible to conduct many fine adjustments, whereby appearance The iPad menu can be changed beyond recognition, and a large number of media files and other audio content can accumulate over the course of use. How to reset an iPad to factory settings when preparing for sale or after purchase.

Reset iPad via Settings

This is the simplest and most quick way Full reset of the device to factory specifications. The good thing about this method is that it does not require connecting to a computer or using third party programs, and offers several options for throwing data, saving some and deleting others. To perform a reset using this method, follow the algorithm:

Step 1. Unlock your gadget, and on the desktop find Settings - a shortcut with a gear. Tap on it and a list of device settings will open. Scroll down the list to the General section (usually located in the first block of functions).

Step 2. After going to this section, you will see a list of the main functional settings of your smartphone. This list must be scrolled down to the penultimate item Reset - click on it.

Step 3. Next, you will see several reset options - the first one offers to delete only the settings and changes you have made, which is great if some function has become unstable, although it previously worked fine (the content and photos on your device remain unchanged). The second option is great for quick pre-sale preparation device, as it erases all personal data. In the same section, you can change the functionality of the Home button, restore network settings, dictionaries, geolocation - just click on the option you need.

Next, you will be required to confirm your actions using Touch ID or entering a password. Then the recovery process will begin - depending on the amount of content, memory size, device state and operating system version, the process can take from several minutes to several hours.

Reset iPad via iTunes

The second quick reset option involves using the iTunes program, that is, you will need a cable to connect the device to personal computer or a laptop, the computer itself, and installed program iTunes.

The main disadvantage of the technique is the longer time spent on the process and the need to connect to a computer. To perform such a recovery, proceed as follows:

Step 1. First of all, you need to disable the Find My iPad feature on your device - if you don't do this, the factory reset won't happen. Held this restoration like this: unlock the device, go to Settings from the desktop, find the iCloud function in the list, scroll through the list available opportunities clouds to the end and at the bottom find the Find My iPad function. Turn it off by dragging the slider to the inactive position so it turns gray instead of green, and then confirm your decision by entering the requested Apple ID password.

Step 2. Connect the unlocked device to your work computer and force launch iTines if it does not happen automatically within a few seconds. Once the system detects your device (you may need to enter your Apple ID password when logging in), click on the tablet icon in the left side menu to go to device settings.

Step 3. After that, in the changed left menu, click on Review.

Step 4. Now in the right main menu, in the first block on the right, find the Restore iPad button - clicking it will return you to factory settings. Do not confuse this with the Restore from copy function, as this means restoring the last settings saved to the device using synchronization with a PC.

Step 5. And then the system will prompt you to confirm your choice - to do this, in the pop-up window you need to click on the highlighted Restore button again. The system may require you to enter a password - if necessary, do this, after which the recovery process will begin, which can take up to several hours.

During all this time your mobile device must remain connected to the computer.

Reset iPad via iTunes without password

How to reset an iPad to factory settings using buttons? Sometimes problems with the gadget’s settings are so serious that it stops turning on and/or unlocking, and this is what causes the need to roll back to factory settings. You can do this without turning on the device as follows:

Step 1. If your device is turned on, turn it off and wait a few seconds until all applications are finished. As soon as Tablet PC will be completely turned off, hold down the Home button.

Restoring the iPad to factory settings allows you to eliminate slowdowns, freezes and other operating system bugs, as well as completely clear the tablet of information stored on it, thereby preparing the device for sale.

Reset iPad to standard settings can be done in several ways:

• through the standard gadget menu;
• using a new profile;
• via iTunes;
• via mode Recovery Mode.

The choice of a specific method depends on what you need to get out of it. So, if the iPad is being prepared for sale, you can use the first option, and for conducting experiments with the device (for example, you need to install a suspicious program or delete a system file), the second method is suitable.

Restoring factory settings via the standard menu

You can reset the iPad to factory settings through the standard menu only in cases where the tablet turns on and you remember the login password. The procedure will be as follows:

In the “Reset” section it is possible to run several operations:

1. "Reset geo settings." Resets the privacy and geolocation settings on the gadget.
2. "Reset keyboard dictionary." When typing any text on the system’s built-in keyboard, it is possible to enter words unknown to the device into the dictionary. By applying this method recovery, you will clear this dictionary.
3. "Reset Home settings." Resets the main screen of the device. Very useful feature, when there are a large number of shortcuts installed on the screen, and you want to get rid of them.
4. "Reset network settings." Sometimes it happens that when you change the SIM card, the tablet starts to malfunction. By completing this procedure, you will reset only the network parameters of the gadget, leaving the rest of the data intact.
5. "Reset all settings." Allows you to restore basic settings for all installed applications. This also deletes all profiles, geolocation data, access points, etc. The applications themselves remain intact.
6. "Reset content and settings." Cleans the tablet completely, deleting all applications, music, photos, etc.

Create a new user profile

You can quickly restore factory settings on your iPad by renaming the directory in which all user settings are stored. To do this you need:

This method allows you to create a new profile on the iPad with factory settings, but it does not clear the gadget from the information stored on it. To recover all data, you just need to rename the folder back.

To access system files and folders, the user must have chief administrator rights (jailbreak). Without them, you will not be able to rename the specified folder.

Using iTunes

iTunes is a device-specific Apple a program that allows you to synchronize your device with a PC, download various content to it, create backups and flash it.

To restore your iPad to factory settings using iTunes, you must:

Using Recovery Mode

All of the above methods for restoring factory settings are absolutely useless if the user has forgotten the iPad password. In this case, the built-in system comes to the rescue Recovery program Mode.

To revive a gadget using the recovery environment, you need to do the following:

1. Turn off the tablet and wait 1-2 minutes until all programs complete their work.
2. Connect the device to the computer.
3. Launch the Recovery Mode application. This is done as follows: press the power button, after a few seconds. Additionally, the return key to the main menu is pressed after 10-15 seconds. Power is released, and after the same amount - Home.
4. After the iTunes picture and the USB cable appear on the iPad screen, you need to open iTunes.
5. Click on “Restore iPad”.
   
6. In the window that appears, select “Check”.
7. Activate the resuscitation process using “Restore and Update”.

Owners of Apple equipment are less likely than users of other brands to encounter problems with the operating system, but sometimes they also have to reset their iPad to factory settings. The reasons for this may be different, but the methods for performing a system rollback do not change. There are three options - through a tablet, through a PC and a method for those who do not remember the password for account.

Before you reset iPad settings to factory settings, you need to make sure that the device is charged at least 30%, and ideally fully charged or connected to power. The second important preparatory point is creating a backup copy. It is necessary if the user resets the device not for subsequent sale or to eliminate software glitches after an unsuccessful update of his device to new version BY. After the procedure is completed, all user data can be restored from the copy.

You can make a backup in two ways:

• directly from your tablet via iCloud;
• by connecting the device to a PC, you will need iTunes installed here.

The difference between the methods is that in the second case, the user does not choose which data to save. All information will be copied - photos, music, notes, browser bookmarks, contacts, etc. It is quite obvious that this process may take longer, but after restoration everything will return to its place. The iCloud option allows the Apple owner to choose what exactly he wants to save. To copy to the cloud you will need stable internet connection via Wi-Fi. Both methods work on all versions of tablets and smartphones – from iPad 2 to iPhone XS.

Making a copy via iCloud

A copy in iCloud is created through the settings directly on the tablet. The user needs to enter the “storage” item and then select “create a copy”.

Advice! If you move the slider to the “on” position at the “ backup data”, then the device will upload information to the cloud daily, provided that the tablet is connected to Wi-Fi, is charging, and its display is turned off at the time of copying.

Making a copy via PC

To save all data from your device and fully restore information, it is better to use iTunes. The procedure is not complicated, so it is worth sacrificing time and waiting to receive a full copy, so that later it does not turn out that important data was accidentally deleted. The procedure for creating a backup in iTunes is as follows.

1. You must enable iTunes on your PC.
2. Before creating a backup or resetting your iPad, iTunes must be updated to the latest version.
3. The iPad is connected with a cable to the PC; in iTunes, the connected gadget will be displayed in the “devices” menu.
4. Using the mouse, a menu of functions opens, in it you should select “create a backup copy”.

All you have to do is wait until the copy is received. Depending on volume internal memory and when it is full, the waiting time will vary. When the process is completed, you should go to the iTunes settings, open the “devices” item and make sure that a fresh copy of the system is displayed there, and it is indicated that the process was successful. Then you can reset your iPad to factory settings.

System rollback via iPad settings

The easiest way to return an iPad to factory settings is through the firmware in the device settings. There is different variants roll back the device– with saving user data or complete removal all information. You can also remove settings network connections, if you have problems connecting to the Internet, or delete the home button settings, as well as clear the dictionary in the keyboard and get rid of geolocation data.

To restore the device to its factory state, the user needs the first two options - “reset settings” or “reset settings and content”. The second option is best used if you later need to set up the iPad as new (that is, the tablet is sold to a new owner), and the first option is suitable for troubleshooting errors in the iPad. For example, it begins to freeze or the application does not open. If you simply delete the settings, the changes will not affect user content.

To reset the iPad, you need to go into its settings, select the “basic” item, at the end of the list there will be a “reset” sub-item. It contains several more points that are listed above. All that remains is to choose the most suitable one and follow the instructions of the system.

Reset via iTunes

Another way to reset your iPad to factory settings is to use iTunes on your computer. It was mentioned above that it should first be updated to the most latest version. Important before restoring iPad via iTunes Disable Find My iPad feature. To do this, you will need your Apple ID password. How to roll back without a password will be described in the last section of this text. If there are no problems with access to the account, then the device will be reset according to the following algorithm.

Reset without password

It happens that the user forgot the password for his Apple ID or did not know it at all, since the tablet was given to him already configured. In this case, the instructions for restoring via iTunes will be useless, since the “find iPad” function is active, and it is impossible to turn it off without knowing the password. In this case, you will have to enter Recovery Mode and perform all the procedures in it. With its help you can bypass “find iPad”. In fact, the reset procedure is no different from that described above, only the device itself must be in recovery mode at the time of pairing with the PC.

To do this, you need to disconnect it from the cable and turn it off completely. When the device has completed its work, you should hold down the “Home” button and, without releasing it, connect the iPad to the PC via a cable. If everything is done correctly, then the iTunes icon and a drawn cable will appear on the gadget screen. Now all that remains is to log into iTunes and reset the device in the same way as described above.

The best iOS tablets

Tablet Apple iPad(2018) 128Gb Wi-Fi + Cellular on Yandex Market

Tablet Apple iPad (2018) 32Gb Wi-Fi on Yandex Market

Apple tablet iPad mini 4 128Gb Wi-Fi on Yandex Market

There can be many cases when it is necessary to return a device to its original state in which it was when sold in a store: the need to sell to a new owner, protecting one’s own information from unauthorized access, and so on. There may be situations where it is necessary to hide unauthorized actions that violate the license for the tablet and operating system. This may be required when contacting the official service center. Then it is better to reset your iPad to factory settings to avoid possible problems or unpleasant questions.

Restoring factory settings in many cases is a necessary measure

Reset iPad to factory settings.

1. By an authorized method of the operating system itself.
2. Emergency recovery of the user profile.
3. A remote reset is truly an emergency when the device is stolen. Used to protect data.

Which method to choose depends on your goals. If you need to reset the device to sell, then you can follow the method of step 1. If the question of how to reset the iPad is raised before visiting the service center, then it is better to follow step 3.

Reset using operating system methods

iOS provides an option when you want to protect sensitive data and remove annoying parts, such as the dictionary. Therefore, six zones are provided at once, which can be cleared using a special menu.

Video on how to reset iPad to factory settings:

As new, just launch the Settings application, which is the core part of the operating system. In the “General” section, find the “Reset” item and select it. You will have access to six main areas:

1. Reset. It “overwrites” everything: the desktop, the location of icons, program settings, alarm clocks, and so on. But photos, music, documents, contact information, browser tabs, calendar content - everything will still be available.
2. Erase contents and settings. It works similarly to the previous point, only everything is actually cleaned. This allows you to reset your iPad to factory settings. It will turn off, and after turning on, all activation and configuration procedures will need to be completed again. So, if you resort to this type of reset, otherwise you won’t be able to start the tablet.
3. Reset network settings. Often used in case of any software failures. It happens that the tablet stops behaving adequately if you change SIM cards different operators. In this case, a type of reset is used that does not affect anything other than wireless communications.
4. Reset the dictionary. You can return the dictionary to the basic one if the device is on sale or you are simply tired of the tablet remembering the wrong abbreviations and constantly inserting words in the wrong place.
5. Reset "Home". Resets desktop settings, icon positions and folder views. May help if you have problems with icons.
6. Reset geopositioning. Many services use . When many programs ask for permission, it is difficult to remember which one can track the location and which one cannot. This reset zone allows you to equalize the rights of all applications and force them to ask for permission again.

Emergency profile recovery

To quickly return to factory settings, you can simply delete the profile settings and restart the tablet. The operating system will create a “clean” profile. This method can be convenient during experiments to quickly start over.

This is done by renaming the settings folder, which is stored in var/mobile/Library. Let's launch