The charger connector plays a very important role in any gadget. If it breaks down, it is not recommended to delay repairs for a long time. A faulty iPad Air charging connector prevents you from using the gadget after the battery is completely depleted. Also in this case, it is impossible to connect to a computer for synchronization.

Causes of malfunction

The charging connector is one of the most vulnerable elements and fails for a variety of reasons. The main reasons why the charging port on the iPad Air does not work include the following:

1. Moisture gets inside the device, leading to oxidation of internal contacts and corrosion.
2. Mechanical damage due to a strong impact or fall from a height.
3. The connector is clogged with dust or dirt.
4. Intensive use, which results in abrasion of the unit
5. Use of non-original and low-quality power cables.
6. There is a malfunction of the lower cable on which the connector for the charger is located.

How to solve a problem

If the connector is clogged, you can try to clean it yourself, but in more severe situations you will need to replace the part. In this case, you will definitely need the help of professionals. Our service center specialists repair the charging connector on the iPad Air as efficiently and quickly as possible.

Before starting repair work, a free diagnostic is carried out, which allows you to determine the cause of the malfunction and find the best way to solve the problem. If it is necessary to replace the charging connector, original components are used, and the repair procedure takes only 1-2 hours.

Tablets from Apple quite often arrive at the service center due to a failure of the device to work with the charger. There can be several ways such a breakdown can occur. Obviously, the problem lies either in the charger connector, in the charger itself, or in the device’s battery. Self-correction of such faults can only be done if you have certain skills and the necessary tools.

Reasons why the charging connector (Lightning) of the iPad (iPad) does not work

The charger connector can fail for many individual reasons. The most common ones are:

• mechanical impact on individual elements of the tablet or on its body as a whole. Quite often, tablet computers are subject to falls and shocks, and such impacts negatively affect the operation of the device. The result of such an impact may be damage to the system control board or disconnection of cables. In addition, very often a malfunction of the Lightning socket is blamed in cases of a banal break in the charger cord. Micro-cable breaks may occur if the iPad is dropped while charging;
• If moisture gets inside the tablet or on the case, it can also cause a malfunction of the charging connector. Many people know that when interacting with water, metals tend to oxidize. It is the oxidation process that can cause a short circuit between the contacts of the power module, which will lead to a malfunction of the Lightning connector;
• The physical impact on the device does not depend on the owner of the device. Such impacts include temperature changes and power surges. It is no secret that sudden voltage drops are a routine process in domestic networks. However, for an iPad this is a serious test, which quite often ends in soldering failure or burnout of individual elements and entire modules of the unit. Therefore, if the reason for the failure of the connector for connecting the charger is a power surge, simply replacing this element does not guarantee the functionality of the gadget;
• You shouldn't rule out battery wear either. Many people may think that battery failure has nothing to do with the Lightning connector, but this is not entirely true. If the battery is very worn, connecting the charger does not start the charging process. Every owner's first complaint is the charger connector, but the real reason for this behavior of the tablet is the exhaustion of the battery life.

It is quite obvious that in order to determine the cause of the problem with the charger connector, you need to diagnose the device. In-house diagnostics are carried out using the following algorithm:

• Connect another original charger to the device. This will help eliminate adapter defects. If the working charger does not start the charging process, then the problem lies in the iPad hardware;
• Next, you need to synchronize the tablet with your personal computer. The fact is that the connector for connecting the charger and the USB cable is the same connector. Therefore, if, when connecting the tablet to iTunes, the system gives an error or the connection does not occur at all, then the problem probably lies in the connector;
• A visual inspection can also help find the problem. Quite often, the charger refuses to work if the socket is severely clogged. Therefore, it is advisable to carefully inspect the adapter connector. Most iPad owners carry them with them almost everywhere, so the likelihood of clogging is quite high.

Repair options in cases where the charging connector does not work (Lightning) iPad (iPad)

The only way to fix a faulty charger connector at home is to clean it. Cleaning the nest must be done using non-metallic tools. The most convenient way to do this is with a wooden toothpick, but it is best to seek help from specialists.

Repair of the connector for connecting the charger at the APPLE-SAPPHIRE service center

If, after going through the self-diagnosis steps described above, it was determined that the problem is with the Lightning connector, or the cause could not be determined, then it is best to contact the APPLE-SAPPHIRE service center for help. Our company’s specialists will promptly carry out a full diagnostic of your iPad, determine the cause of the malfunction and carry out repair work.

The iPad charging connector is connected by a cable to the motherboard. He is also responsible for transferring data via a USB cable from the tablet to the computer. It may unexpectedly fail due to careless handling or improper use. To solve this problem, you will need to replace the cable and the iPad charging connector. For this procedure, you will need to disassemble the iPad, replace the charging cable with a new one and carefully install it in place.

The main reasons why you need to replace the iPad charging connector cable:

• - iPad takes a very long time or does not charge at all;

• - iPad charges only when the cable is held firmly;

• - iPad is detected by the computer and transfers files using a USB cable, only when the cable is held tightly;

The most common reasons for failure of the iPad charging socket cable are:

• - Moisture getting inside the iPad, which can lead to oxidation of the contacts;

• - Inaccurate connection of the charging or USB cable to the iPad, which may cause the connector to become deformed;

• - Using non-original chargers and USB cables to connect to a PC;

• - When charging in a car, adapters and accessories may be selected incorrectly;

In order to change the cable of the iPad charging connector you need to:

• - Carefully peel off the iPad touch glass, after heating it with a hairdryer. Under the touch glass there is a cable connecting the glass to the tablet's motherboard. The procedure requires care and caution. Next, you need to lift the glass of the iPad and disconnect the cable.

• - Place the glass to the side and disconnect the iPad c charging connector cable using a special tool that resembles a spatula.

• - We inspect all contacts for physical damage. Creases, dirt on contacts and the like.

• - Carry out the procedure for replacing the charging cable and reassemble the iPad, exactly in reverse order

ATTENTION!!!

ALL ACTIONS DESCRIBED ABOVE ARE CARRIED OUT AT YOUR OWN RISK.

Removing the iPad charging connector

What are the causes of iPad charging failure and how to deal with them, what should you pay attention to to detect the problem?

Repairing the iPad charging connector: the first step is checking

Before sending your gadget for repair, you should check the charger itself. Maybe due to its malfunction, the iPad is not receiving power from the outlet. Most likely, the tablet will not synchronize with the PC. Also, the reason that the problem that the iPad does not respond to the network connection may lie in a faulty charging connector. To check, take another memory, for example, from your friends, and check if the gadget works with it.

The problem is often a consequence of extremely careless use of the gadget. There are also other reasons for failure. For example, due to careless transportation and damage from falling. In this case, contact a professional MOBILA MASTER workshop, where specialists will conduct preliminary diagnostics, identify the problem and carefully remove the broken port, replacing it with a new power socket. Our service operates in Moscow and Khimki.

Changing the charging connector on an iPad

When is iPad charging repair the only option?

Sometimes, when a message appears about problems with charging your gadget, it is enough to simply reboot your iPad. You also need to remember that to restore energy, the tablet requires an adapter with a power of more than 10 W. Be sure to remember this when purchasing a new original charger.

It is very likely that the iPad is not charging or is not synchronizing with the computer due to the suddenly broken bottom cable. Most often, failure is caused by liquid getting inside the device, as a result of which the contacts oxidize, the board is damaged, and the cable also stops working. In this case, the motherboard is cleaned, but do not try to do it yourself. It’s better to have a functioning cable installed in a broken iPad in a short time.

The iPad does not respond when connected to a power source also because the power controller is sometimes damaged. This can be caused by the use of a counterfeit Chinese charger. Malfunction rarely occurs. But in any case, try to use only original spare parts that will not harm the tablet. Otherwise, call the technician urgently. Repairing the device yourself will almost certainly make the problem worse and increase the cost of repairs and maintenance. Order iPad charging repair at our service center.

The problem may be in the sockets themselves in the apartment due to a lack of voltage that the tablet needs. In this case, it is worth buying a branded Apple adapter for a European socket.

The main thing is to protect your equipment from falling and other negative influences. Careless user handling is the most common cause of iPad failure. It's worth buying protective covers. If price bothers you, remind yourself that cheapness is the worst indicator of a quality product. Follow simple operating rules and your iPad will serve you for a long time.

Your iPad Air 2 stopped charging Or does it charge very slowly? Most likely you will need Replacing the charging connector on iPad Air 2. A charging connector that also serves as a connector for data transfer via USB cable from a tablet to a computer, is designed in such a way that careless handling can damage it. Also, the charging connector in the iPad Air 2 could break during long-term use due to simple mechanical wear.

Charging port on iPad Air 2may break for the following reasons:

• the entry of moisture, dust or dirt into the device can lead to oxidation and corrosion of the cable;
• repeated inaccurate connection of the charging or USB cable can deform or damage the charging connector;
• use of non-original and low-quality chargers;
• The tablet was charged in the car using an unsuitable charger.

Repair of the charging connector on the iPad Air 2 is carried out by replacing the damaged one bottom train on new. If you need iPad Air 2 charging connector repair, bring it to our service center. We will carefully disassemble your tablet and remove the damaged one. bottom train and put a new one in its place. Then we will assemble the tablet back and check it for full functionality, after which we will return it to you with a guarantee for the work done.