Work safety in mail program preinstalled on your mobile device, can only be guaranteed if the device's operating system version is iOS 3 or higher.If the OS version is iOS 2 or lower, then it is not safe to use the email program preinstalled on it. We recommend updating your iOS version.

Configure via IMAP protocol

2. Select Other.

3. Fill in the fields:

6. Go to Settings → Accounts & Passwords and open the account you just connected.

7. Proceed to edit your account.

10. Fill in the fields:

11. Click "Done".

12. Return to the Account menu. entry" and go to the "Advanced" section.

993 .

Configure via POP3 protocol

1. Open the default Mail app on your iPhone or iPad.

2. Select Other.

3. Fill in the fields:

4. An error message will appear. Select Continue.

5. Go to the “POP” tab.

6. Change data:

After connecting your mail, you need to set additional settings.

8. Go to Settings → Accounts & Passwords and open the account you just connected.

8. Tap SMTP in the Outgoing Mail Server section.

9. Proceed to edit the primary server.

10. Fill in the fields:

11. Tap Done.

12. Return to the previous screen and go to the “Advanced” section.

13. Check that in the “Inbox Settings” section the “Use SSL” setting is enabled and the server port is specified 995 .

Changing SSL settings

1. Go to Settings → Accounts & Passwords and open the account you connected.

2. Look at what you have in the “Host Name” field in the “Incoming Mail Server” section.

The mail program is configured using the POP3 protocol

2. Proceed to edit the primary server.

3. Fill in the fields:

4. Tap Done.

5. Return to the previous screen and go to the "Advanced" section.

6. Install:

The mail program is configured using the IMAP protocol

1. Tap SMTP in the Outgoing Mail Server section.

9. Proceed to edit the primary server.

10. Install:

11. Click "Done".

If the above settings are already installed in your email program, then no changes need to be made.

If you have problems setting up your email program, use our

Sometimes after setting up mail on iPhone, messages are not sent. What to do in such a situation?

Many people have encountered a problem when mail on the iPhone seems to be set up and everything is fine. You receive incoming mail without any problems, but you cannot send anything. The reason, of course, is not so simple, but we will try to explain it clearly. So why doesn't mail work on iPhone?

General information

When you send a letter via regular mail, bring it to the branch. It redirects to the post office at the addressee's place of residence, and then it is delivered to him.

The situation is approximately the same with an email account. When sending a message, it arrives at the Internet provider’s server, then goes to the recipient’s mail server, and then receives it directly the one who should.
But spammers and spyware creators are increasingly dangerous because they create zombie programs that send emails without your participation.

Therefore, providers actively use port 587 when sending messages. Ports are invisible channels through which a computer connects to the Internet. One is responsible for mail, the other for the Internet, and so on. Many PCs use port 25 to send letters.

But to block spam sent by zombie programs, large networks have configured their work so that emails sent through port 25 go only in one direction - to the server to the provider. As a rule, the zombie programs themselves send letters directly to the addressee, which is why they are so easy to block.

1. Solving the problem with sending mail
2. If your iPhone sends an email through the correct port, but it is blocked, then this needs to be fixed.
3. First, select a different port. On the home page, select Settings - Mail, contacts, calendars and select the name of your account
4. Click on the address to edit it
5. Click on enable SMTP section
6. At the bottom there is a line server port. Change its value to 587
   Repeat writing the message again. If nothing works, then change the port to 465

How to use the carrier's server?

What to do if mail is not sent from iPhone?

When you have a direct connection to the Internet at home, the provider has already remembered you and trusts you, but when you are in another place, you are already using, for example, the EDGE network and the provider can no longer recognize you. That's why mail is blocked, as it is considered spam.

Each provider has a mailing address that can be used when leaving. But an easier method is to use the operator's mail server.

1. Go to mail settings
2. Select your account
3. Enter the sending mail server to your operator's address

This change will help you use mail and send messages through your mobile operator's network without any problems.

Video: How to set up mail on iPhone, iPad, iPod Touch?

The Mail program (or Mail) is a standard application of the iOS system and does not require additional installation from the App Store. However, to work with the mail client, you must first carry out the “Mail” setup procedure. This article will discuss all the possible stages of setting up an email client using the native Mail application as an example.

Standard Mail setup on iPhone/iPad

To configure the email client, go to “Settings” -> “Mail, addresses, calendars”. Here the user is given a choice of services, such as Google, Yahoo, iCloud, Outlook and so on. To connect a service account that is not included in the general list, you need to click on the “Other” button, however, in this case, the procedure for connecting an account may differ from the standard one.

Having selected a service in which you already have an account, you need to tap on its logo, and then indicate the basic information of your account: name, e-mail, password. After checking the information, if there are no errors, the Mail application will be ready to use. But don’t rush to leave the “Mail, Addresses, Calendars” section. Here you can also customize some design styles, notifications, signatures and other little things.

By the way, if necessary, it is possible to add several accounts of various mail services at once.

Adding an account for Tut.by, Rambler, Yandex, etc. to the Mail app on iPhone/iPad

You can add a Tut.by or Rambler account to the standard iOS mail client “Mail” only by linking the server address. To do this, in the service selection window, click “Others”. In the menu that appears, enter your name, email and password.

• Mail.ru - pop.mail.ru
• Yandex - pop.yandex.ru
• Rambler - pop.rambler.ru
• Tut.by - pop.gmail.com

In the next line, enter your email and mailbox password. In the “Outgoing Mail Server” section you must enter the following data:

• Mail.ru - smtp.mail.ru:25
• Yandex -smtp.yandex.ru
• Rambler - smtp.rambler.ru
• Tut.by - smtp.gmail.com

After which, despite the “optional” mark, you should enter your email and password for it in the same section, below the specified server, otherwise the third-party service will simply not receive or send emails. Click Next and in the dialog box that appears, select “Save”.

If you encounter the error “The server rejected the recipient because. it does not allow relay" or "Relay error" in your email client, check that the information is filled in correctly.

As a final step, in the last settings menu that appears, we indicate those sections that we want to synchronize with the mail service (contacts, calendars, etc.), save all the settings made and check the operation of the mail. If an error occurs in the operation of the mail service, try repeating the entire procedure again. Perhaps you just missed something at one of the stages.

Also check that in the settings of your mail account, in the “outgoing mail” section, in the “primary server” item, the use of SSL is activated. If this does not help and mail continues to not work on your iPhone or iPad, then, in the same section, change the numerical value of the server port to 465 or 25.

Google two-step verification: setting up mail on iPhone or iPad

Often, Gmail users activate the two-step verification feature to increase the security of their Google account. From the moment it is turned on, the active mail account on the iPhone and iPad stops working, displaying the error "The username or password you entered is incorrect". In this case, re-entering the password or checking the username (just in case) does not bring any benefit.

In this case, you need to do the following:

Step 1. Log into your Google account through a browser and go to the “Security” section.

Step 2. Look for the line “Two-Step Verification” and go to “Settings”.

Step 3. You will be prompted to enter your Google account password, after which you will be taken to the settings for this function. We need a second tab “Application Passwords”. Click on the “Manage application passwords” button and enter the password again.

Step 4. We see a list of all applications that have access to your Google account and mail, including. Here you can give access to the Mail application on your iPhone and iPad. To do this, click on the “Applications” menu, select “Mail”, and on the right, click on the “Device” menu, select iPhone or iPad and click the “Create” button.

Step 5. After all the manipulations, instructions will immediately open containing a new password for setting up an account on your device.

Following the instructions, go to “Settings” -> “Mail, addresses, calendars”, select your Gmail account from the list and change the password to the one specified in the instructions. Ready!

Email clients from the App Store

Despite the availability of quite high-quality standard ones on iOS, good alternative options can be: Mailbox, myMail, Boxer (lite version available) and standard clients from Google, Yandex, Yahoo and so on. Each application has a unique design and boasts interesting features that will make working with emails much easier and more convenient. The choice is yours.

If you haven’t found an answer to your question or something didn’t work out for you, and there is no suitable solution in the comments below, ask a question through ours. It's fast, simple, convenient and doesn't require registration. You will find answers to your and other questions in the section.

Join us on

Thousands of people have encountered this problem. You've set up your POP email account and everything seems to be fine. But while you can receive letters, you cannot send them. You create an outgoing message, click

The reason for this problem is technically complex, but let's try to explain it more simply.

When you send a letter by regular mail, you leave it at the post office. This letter is forwarded to the addressee's post office, which is located in another city, and then from there it is delivered to the address.

In a high-tech sense, the same thing happens with email. When you send a message, it is first sent to your ISP's mail server (the main mail computer). The message is then sent to the recipient's mail server, and his mail program retrieves your message from there.

But spammers and spyware authors pose a growing threat, especially those who create "zombie" programs that generate spam on your computer without your knowledge. So major ISPs have started to counter them with two methods that also block outgoing messages from your iPhone. So:

• Using port 587. Ports are invisible "channels" leading from a computer to the Internet. One port is responsible for forwarding mail, another for the Internet, etc. Most computers use port 25 to forward email. However, to block spam generated by zombie programs, large Internet service providers have configured their networks so that emails sent through port 25 could only go in one direction: to the Internet service providers' own mail servers. (Basically, zombie programs try to send messages directly to recipients' mail servers, so they are effectively blocked that way.) Your iPhone tries to send a message on port 25 and it gets blocked.

Solution? Select a different port. On the Home page, click Settings - Mail, Contacts, Calendars. Select the name of your POP account. Scroll to Outgoing Mail Server. Click on the address to edit it. Click On to open the SMTP section.

At the bottom of this section is the Server Port field. Change its value, for example, to 587.

Try sending the email again. If this still fails, try changing this suffix to 465.

• Use your carrier's mail server. When you're at home, your computer is directly connected to your ISP's network via a modem or DSL. The ISP knows and trusts you.

But when you're somewhere else and your iPhone is using your carrier's EDGE mobile network, your ISP can't recognize you. Because your outgoing mail is generated outside of your ISP's network, it is blocked. According to your ISP, you may be a spammer.

Your Internet Service Provider may have a special mail server address for use while traveling. But a simpler way out of the situation would be to simply use the operator's own mail server.

Click Settings - Mail - the name of your POP account- Outgoing Mail Server. Click on the address to edit it. Replace the existing address with the one provided by the operator, for example сwmx.com (this abbreviation previously meant Cingular Wireless Mail Exchange).

This simple change will allow you, like thousands of other people using all sorts of gadgets, many of which are described, to not only receive, but also send messages using the mobile operator's network.

If your company is not working for you, see the solution to the problem at the link.

One of the directions of our site is instructions for solving various problems on iPhone/iPad/MacBook. This time We did not move away from this idea.

Lately, people have often started contacting us regarding the problem of sending a letter from @mail.ru. Such problems can also be observed on other mail servers, but since they mainly use mail.ru services in Asia, we decided to write instructions for improving the performance of mail on iPhone 4/4s/5/5s

If your iPhone is not sending a letter and the error “could not send the letter” and “incorrect outgoing SMTP server” is displayed, then these instructions should help you and solve your problem

Instructions:

1. Delete the mail setting: Settings ->

2. Mail, addresses, calendars - >

3. Select: mail account

4. Click: Delete account

Now we set up mail manually

1. Turn on airplane mode

2. Go to: Mail, addresses, calendars

3. Click on: Add account

4. Choose: Other

6. Fill in the fields:

8. On the new window, select POP (this is the most important thing) and fill in

INCOMING MAIL SERVER

Node name: pop.mail.ru (if you have @inbox.ru or @list.ru then write yours instead of mail.ru)

Username: alfakron (write only before @)

Password: (Your password)

OUTGOING MAIL SERVER

Node name: smtp.mail.ru (also if you have list.ru or inbox.ru, then write your own instead of mail.ru)

User name: (empty)

Password: (blank)

9. Click save, a window will pop up, click continue and click save again, save again

10. Turn off airplane mode and check your email

Setting up e-mail on an iPhone, like any other function on a device of this type, has its own characteristics. But this does not mean that setting up mail on an iPhone is difficult. Not at all, you just need to know some of the features of adding a specific mailer.

Before you install your email, you need to prepare and check if you have an Internet connection, as well as the ability to create a mailbox with a specific name. But it is not necessary to do all this, because... everything will become clear as you work.

How to set up mail from mail.ru and other well-known mailers - read in our article today.

In the usual way, it is easy to set up mail on resources such as iCloud, Yahoo, Outlook.com or Gmail. Even an inexperienced user can do this, because... procedures are intuitive. This is due to the fact that the standard Mail.app protocol has been introduced into the iPhone’s operating system. automatically adding settings for servers of different mail services. Therefore, here the user will only need to enter his data into the account and save the name of the box in the device’s memory.

Using all mail functions through a standard program is convenient and easy. It's as easy as writing an SMS message. About important events for the user - the receipt of new letters - he will be notified by a sound signal. However, there are also disadvantages. For example, it is not yet possible to send a photo through the application.

But let’s end with a lyrical digression and move on to the main thing, namely, how to set up a mailbox on an Apple smartphone. This is, without a doubt, the most popular mailer among users, so we will consider in detail the nuances of working with it. Although, in principle, the setup of other servers is almost the same. But still, there are some subtleties there, and they will also be mentioned.

So, to configure the above-mentioned mailer on an Apple gadget, you need to perform the following steps:

1. Open settings and select the “Mail...” section.
2. Click on the option to add a new “account”.
3. Select the “Other” section. Mail.ru mailer is not on the list of reputable programs for Apple.
4. Filling out all the fields in the pop-up window: user name, mailbox name, account characteristics.
5. Click on the continue button, after which the setup process will start automatically.
6. Save data in a new window that pops up.

If everything went well, after the 6th step the settings should be completed automatically. To check this, you need to go to the mail application, having first closed other settings. The mailbox configured this way should now work perfectly. Letters should be sent without problems, and those received in the user’s mailbox should be opened quickly. To check the functionality of the mailbox, it’s a good idea to try sending an e-mail to a friend or acquaintance. If the letter arrives, it means the procedure was successful. If not, you will have to resort to more serious tuning of your mail settings.

Ways to solve problems setting up Mail on iPhone

If nothing worked with setting up mail on your Apple gadget, follow these steps, which should help 100%:

• Go to your device's mail settings.
• Next, go to the settings of the newly created mailbox.
• In the Outgoing Email Servers section, click on SMTP.
• If your mailbox already has your mailboxes configured, click on smtp.mail.ru in the primary server section. If there are none, select “not configured”, and in the node name section you should indicate smtp.mail.ru, then save the action and click on smtp.mail.ru again.
• See if the “Use SSL” switch is activated, as well as whether the server port information is correct (it should be written 465). But it happens that everything works fine with port 587.
• Click the Done and Back buttons one after the other, and then click on the Advanced options tab.
• Recheck your inbox settings, incl. switch position. But the server port should be 993.

After you have done everything described above, the mail will work. In addition, you can configure other mailers in the same way. And all of them will be in a single standard program. It is important that the process of switching between boxes from different companies is very easy and convenient.

How to set up Russian-language email clients on iPhone

With boxes from other companies, the situation is a little more complicated, but nothing is impossible here either. We are talking about such mailers as Rambler or Yandex, popular in Russia. To set up their mailboxes on an iPhone, the user will need to manually enter data. But at the same time, each of the mailers has its own characteristics, so we will analyze the process of setting up the mailboxes of the most famous companies in more detail.

So, to set up e-mail from Yandex on an Apple gadget, you need to repeat several steps similar to those described above - which the user performed when working with Mail.ru. But now at the bottom of the “account” you need to select the “Other” item.

Next you need to enter your email name, password and description. The mail settings manager built into the mobile device will give the user a recommendation to create an e-mail in the standard IMAP protocol. However, when trying to fill it out, the user almost always encounters an error. In such a situation, you need to exit the window of this protocol. which will start loading automatically, and go to POP. Almost all remaining data will be linked automatically.

• Change the names of nodes for incoming email servers - to pop.yandex.ru.
• For outgoing calls – at smtp.yandex.ru.

After completing the verification and confirming the entered information, you need to save everything. If necessary, you can synchronize your contacts. After all these steps, the Yandex mailbox will work safely.

On Rambler, e-mail is configured in the same way, only the protocols suitable for a given mailer are prescribed (Yandex is replaced by Rambler).

Useful materials: