In order to hunt in Evergreen, you first need to make sure that your computer meets the minimum system requirements:

Anyway

you will need a constant connection to the Internet (if the connection is lost, the game freezes and waits for the connection to be restored), a screen with a minimum resolution of 1024x768, you must have a video card that supports Shader Model 3.0 (therefore, most likely the game will not run on laptops with Intel video cards) and my advice - it is best to play with headphones to exclude third-party noises and sounds of the offline world, which can easily prevent you from hearing the sound of the footsteps of an approaching animal.

for online games

requires a dual-core 2GHz processor, 2GB of RAM and an NVidia 8 series (8800 or better) or ATI Radeon HD 2000 series (2400 or better) video card with 256MB of memory (for low and medium graphics) and 512-768MB (for high graphics, depending depending on the number of players), Internet speed 512Kb/sec. in both directions for a network game client and 1-2Mb/sec. for the creator of an online game. At the same time, the creator of the game must ensure a frame rate of at least 25-30 frames per second, otherwise the physics in the game may malfunction.

for single player:

Pentium 4 processor (3GHz) is suitable, RAM 2GB, NVidia video card 7 series (7600 or better) or ATI X1900 (or better) with 256MB of memory (for low and medium graphics) and 512MB (for high).

Next, you need to go through a short registration procedure on the website www.thehunter.com, create your account and your character. If the information on your personal web page is displayed in a language unknown to you, you need to click on the gear at the top right, select language and in the window that opens, change the language to Russian. Not everything has been translated yet, but a lot has already been translated. then you need to go to the “download” section, download the launcher (about 18MB) and install it. after installing the launcher, you will be prompted to immediately start downloading and installing the game (about 1.5 GB), but you can install it later; when you start the first hunt, the launcher will independently check for updates and download all the necessary game files.

The game is always launched via an Internet browser from your game account. To start a hunt, you need to press the orange “hunt” button and select one of the options for starting the game. you have two options for starting the game out of three available. the first is to create a single-player game, the second is to join a multiplayer game (if the creator has allowed players with a guest license to join the game and/or has not set a password), the third option is to create a multiplayer game yourself, which is only available to subscribers (members).

To start a single-player game, you need to select a reserve, one of the bases to start, the start time of the hunt and click “start game”. The launcher window will automatically open, which will download and install the game upon first launch. on subsequent launches it will only check for updates and automatically download and install them. I would like to draw your attention to the gear in the upper right corner of the launcher - here you can set all the necessary graphics settings. After checking and installing all the updates, an orange “start” button will appear in the lower right corner of the launcher - feel free to click, the game will start.

Finally, I want to give a few tips that will solve seventy percent of your first questions:

• spend 30-40 minutes and study your personal web page, interface, structure, there is a lot of information there, poke around everywhere, go to your profile (to do this you need to click your avatar with a nickname in the upper right corner), look at the profile tabs.

• see what the profiles of other players look like. To do this, you can click on the “friends” icon in the upper left corner and enter any letter in the search window - a list of players whose nicknames begin with this letter will appear, click on any and you will be taken to his profile, look at his statistics, skills, achievements and etc. even better - go to the leaderboards and there click on the players’ nicknames and get to their profiles.

• take four short training courses. Everything there is accessible and understandable in Russian. You can get into the training through a pop-up window by hovering over the orange “hunting” button on the main page of your account.

• add friends by clicking "send friend request". You can send messages to friends through the site; to do this, click the “letters” icon next to the “friends” icon in the upper left corner. Considering that you will be primarily interested in Russian-speaking members of the gaming community, you can start with me, my nickname is ohotnikna. then you can look at my list of friends in my profile and add them to yourself (note that not all Russian speakers are there).

Unfortunately, games have flaws: stutters, low FPS, crashes, freezes, bugs and other minor and not so minor errors. Often problems begin even before the game starts, when it does not install, does not load, or does not even download. And the computer itself sometimes does weird things, and then in theHunter there’s a black screen instead of a picture, the controls don’t work, you can’t hear the sound or anything else.

What to do first

1. Download and run the world famous CCleaner(download via direct link) - this is a program that will clean your computer of unnecessary garbage, as a result of which the system will work faster after the first reboot;
2. Update all drivers on the system using the program Driver Updater(download via direct link) - it will scan your computer and update all drivers to the latest version in 5 minutes;
3. Install the program WinOptimizer(download via direct link) and include it in it Game Mode, which will end useless background processes while running games and improve in-game performance.

The second thing you should do if you have any problems with Hunter: Hunter on the Trail of the Predator is to check the system requirements. In a good way, you need to do this before purchasing, so as not to regret the money spent.

theHunter minimum system requirements:

Info, 2 GB RAM, 256 MB, NVidia GeForce 8800,

Every gamer should have at least a little understanding of components, know why a video card, processor and other things are needed system unit.

Files, drivers and libraries

Almost every device in a computer requires a set of special software. These are drivers, libraries and other files that provide correct work computer.

You should start with the drivers for your video card. Modern graphics cards are manufactured by only two large companies - Nvidia and AMD. Having found out which product drives the coolers in the system unit, we go to the official website and download the latest driver package:

A prerequisite for the successful functioning of Hunter: Hunter On the Trail of a Predator is the availability of the latest drivers for all devices in the system. Download the utility Driver Updater to easily and quickly download the latest drivers and install them with one click:

If theHunter does not start, we recommend that you try to disable your antivirus or put the game in the antivirus exceptions, and also check again for compliance with the system requirements and if something from your build does not comply, then, if possible, improve your PC by purchasing more powerful components.

In Hunter: Hunter On the Trail of a Predator black screen, white screen, color screen. Solution

Problems with screens of different colors can be divided into 2 categories.

Firstly, they often involve using two video cards at once. For example, if your motherboard has a built-in video card, but you are playing on a discrete one, then theHunter can be launched for the first time on the built-in one, but you will not see the game itself, because the monitor is connected to a discrete video card.

Secondly, color screens occur when there are problems with displaying images on the screen. This can happen for various reasons. For example, theHunter cannot work through an outdated driver or does not support the video card. Also black/ White screen may be displayed when running at resolutions that are not supported by the game.

theHunter crashes. At a specific or random moment. Solution

You play for yourself, play and then - bam! - everything goes out, and now you have a desktop in front of you without any hint of a game. Why is this happening? To solve the problem, you should try to figure out what the nature of the problem is.

If a crash occurs at a random moment in time without any pattern, then with a 99% probability we can say that this is a bug of the game itself. In this case, it is very difficult to fix something, and the best thing to do is just put theHunter aside and wait for the patch.

However, if you know exactly at what moments the crash occurs, then you can continue the game, avoiding situations that provoke a crash.

However, if you know exactly at what moments the crash occurs, then you can continue the game, avoiding situations that provoke a crash. In addition, you can download theHunter save and bypass the departure location.

theHunter freezes. The picture freezes. Solution

The situation is approximately the same as with crashes: many freezes are directly related to the game itself, or rather to the developer’s mistake when creating it. However, often a frozen picture can become a starting point for investigating the deplorable state of a video card or processor.

So if the picture in theHunter freezes, then use programs to display statistics on component loading. Perhaps your video card has long exhausted its working life or the processor is heating up to dangerous temperatures?

The easiest way to check the load and temperatures for the video card and processors is in the MSI Afterburner program. If you wish, you can even display these and many other parameters on top of the Hunter picture: Hunter On the trail of a predator.

What temperatures are dangerous? Processors and video cards have different operating temperatures. For video cards they are usually 60-80 degrees Celsius. For processors it is slightly lower - 40-70 degrees. If the processor temperature is higher, then you should check the condition of the thermal paste. It may have already dried out and needs to be replaced.

If the video card is heating up, then you should use a driver or an official utility from the manufacturer. It is necessary to increase the number of revolutions of the coolers and check whether the operating temperature decreases.

theHunter is slow. Low FPS. Frame rate drops. Solution

If there are slowdowns and low frame rates in Hunter: On the Trail of the Predator, the first thing you should do is lower the graphics settings. Of course, there are many of them, so before reducing everything, it’s worth finding out exactly how certain settings affect performance.

Screen resolution. In short, this is the number of points that make up the game picture. The higher the resolution, the higher the load on the video card. However, the increase in load is insignificant, so you should reduce the screen resolution only as a last resort, when everything else no longer helps.

Texture quality. Typically, this setting determines the resolution of texture files. You should reduce the texture quality if the video card has a small amount of video memory (less than 4 GB) or if you are using a very old one. HDD, whose spindle speed is less than 7200.

Model quality(sometimes just detailing). This setting determines which set of 3D models will be used in the game. The higher the quality, the more polygons. Accordingly, high-poly models require more computing power video cards (not to be confused with the amount of video memory!), which means this parameter should be reduced on video cards with low core or memory frequencies.

Shadows. They are implemented in different ways. In some games, shadows are created dynamically, that is, they are calculated in real time at every second of the game. Such dynamic shadows load both the processor and the video card. For optimization purposes, developers often abandon full rendering and add pre-rendered shadows to the game. They are static, because essentially they are just textures overlaid on top of the main textures, which means they load memory, and not the video card core.

Often developers add additional settings related to shadows:

• Shadow Resolution - Determines how detailed the shadow cast by an object will be. If the game has dynamic shadows, it loads the video card core, and if a pre-created render is used, then it “eats” the video memory.
• Soft shadows - smoothing out unevenness in the shadows themselves, usually this option is given along with dynamic shadows. Regardless of the type of shadows, it loads the video card in real time.

Smoothing. Allows you to get rid of ugly corners on the edges of objects through the use of a special algorithm, the essence of which usually comes down to generating several images at once and comparing them, calculating the most “smooth” picture. There are many different anti-aliasing algorithms that differ in their level of impact on theHunter's performance.

For example, MSAA works head-on, creating 2, 4 or 8 renders at once, so the frame rate is reduced by 2, 4 or 8 times, respectively. Algorithms like FXAA and TAA work a little differently, achieving a smooth image by calculating only the edges and using some other tricks. Thanks to this, they do not reduce performance as much.

Lighting. As with anti-aliasing, there are different algorithms for lighting effects: SSAO, HBAO, HDAO. They all use video card resources, but they do it differently depending on the video card itself. The fact is that the HBAO algorithm was promoted mainly on video cards from Nvidia (GeForce line), so it works best on “green” ones. HDAO, on the contrary, is optimized for video cards from AMD. SSAO is the simplest type of lighting; it consumes the least resources, so if theHunter is slow, it’s worth switching to it.

What to reduce first? Shadows, anti-aliasing and lighting effects tend to take the most work, so these are the best places to start.

Gamers often have to optimize theHunter themselves. Almost all major releases have various related forums where users share their ways to improve productivity.

One of them is a special program called WinOptimizer. It is made specifically for those who do not want to manually clean their computer of various temporary files, delete unnecessary registry entries and edit the startup list. WinOptimizer will do this itself and also analyze your computer to identify ways to improve performance in applications and games.

theHunter lags. Large delay when playing. Solution

Many people confuse “brakes” with “lags,” but these problems have completely different causes. theHunter slows down when the frame rate at which the image is displayed on the monitor decreases, and lags when the delay in accessing the server or any other host is too high.

That is why “lags” can only occur in online games. The reasons are different: bad network code, physical distance from servers, network congestion, incorrectly configured router, low speed Internet connections.

However, the latter happens least often. In online games, communication between client and server occurs through the exchange of relatively short messages, so even 10 MB per second should be enough.

theHunter has no sound. Can not hear anything. Solution

theHunter works, but for some reason does not sound - this is another problem that gamers face. Of course, you can play like this, but it’s still better to figure out what’s going on.

First you need to determine the scale of the problem. Where exactly is there no sound - only in the game or even on the computer? If only in a game, then perhaps this is due to the fact that the sound card is very old and does not support DirectX.

If there is no sound at all, then the problem is definitely in the computer settings. Perhaps the sound card drivers are installed incorrectly, or maybe there is no sound due to some specific error in our beloved Windows OS.

TheHunter controls don't work. theHunter does not recognize the mouse, keyboard or gamepad. Solution

How to play if it is impossible to control the process? Problems with supporting specific devices are inappropriate here, because we are talking about familiar devices - a keyboard, mouse and controller.

Thus, errors in the game itself are practically excluded; the problem is almost always on the user's side. You can solve it in different ways, but, one way or another, you will have to contact the driver. Usually, when you connect a new device, the operating system immediately tries to use one of the standard drivers, but some models of keyboards, mice and gamepads are incompatible with them.

Thus, you need to find out the exact model of the device and try to find its driver. Devices from well-known gaming brands often come with their own software packages, since the standard Windows driver simply cannot ensure the correct operation of all functions of a particular device.

If you don’t want to search for drivers for all devices separately, you can use the program Driver Updater. It is intended for automatic search drivers, so you just need to wait for the scan results and download necessary drivers in the program interface.

Often the brakes in Hunter: Hunter On the Trail of the Predator can be caused by viruses. In this case, it makes no difference how powerful the video card is in the system unit. You can scan your computer and clean it of viruses and other unwanted software using special programs. For example NOD32. The antivirus has proven itself to be the best and has been approved by millions of users around the world.

ZoneAlarm is suitable for both personal use and small businesses, capable of protecting a computer running Windows system 10, Windows 8, Windows 7, Windows Vista and Windows XP from any attacks: phishing, viruses, malware, spyware and other cyber threats. New users are given a 30-day free trial.

Nod32 is an antivirus from ESET, which has received many awards for its contribution to security development. Versions of antivirus programs are available on the developer’s website for both PCs and mobile devices, a 30-day trial is provided. There are special conditions for business.

theHunter downloaded from a torrent does not work. Solution

If the game distribution was downloaded via torrent, then in principle there can be no guarantees of operation. Torrents and repacks are almost never updated through official applications and do not work over the network, because in the process of hacking, hackers cut out all network functions from games, which are often used to verify the license.

Using such versions of games is not only inconvenient, but even dangerous, because very often many files in them have been changed. For example, to bypass protection, pirates modify the EXE file. At the same time, no one knows what else they do with it. Perhaps they are building in a self-executing software. For example, when the game is first launched, it will integrate into the system and use its resources to ensure the well-being of hackers. Or, giving access to the computer to third parties. There are no guarantees here and cannot be.

In addition, the use pirated versions- this, according to our publication, is theft. The developers spent a lot of time creating the game, investing their own money in the hope that their brainchild would pay off. And every work must be paid.

Therefore, if any problems arise with games downloaded from torrents or hacked using one or another means, you should immediately remove the pirated version, clean your computer using an antivirus and licensed copy games. This will not only protect you from dubious software, but will also allow you to download updates for the game and receive official support from its creators.

(game) gives an error about the missing DLL file. Solution

As a rule, problems associated with the absence of DLLs arise during game startup, but sometimes the game can access certain DLLs during the process and, not finding them, crash in the most blatant manner.

To fix this error, you need to find the necessary DLL and install it on the system. The easiest way to do this is using the program DLL-fixer, which scans the system and helps quickly find missing libraries.

If your problem turns out to be more specific or the method outlined in this article did not help, then you can ask other users in our “” section. They will help you quickly!

Thank you for your attention!

Sometimes theHunter.exe and other errors system errors EXE may be related to issues in the Windows registry. Several programs can use theHunter.exe file, but when those programs are uninstalled or modified, sometimes "orphaned" (incorrect) EXE registry entries are left behind.

Basically, this means that while the actual path of the file may have changed, its incorrect former location is still recorded in the Windows Registry. When Windows tries to look up these incorrect file references (file locations on your PC), theHunter.exe errors can occur. Additionally, a malware infection may have corrupted Hunter-related registry entries. Thus, these corrupt EXE registry entries need to be fixed to fix the problem at the root.

Manually editing the Windows registry to remove invalid theHunter.exe keys is not recommended unless you are PC service professional. Mistakes made when editing the registry can lead to inoperability of your PC and cause irreparable damage to your operating system. In fact, even one comma placed in the wrong place can prevent your computer from booting!

Because of this risk, we highly recommend using a trusted registry cleaner such as %%product%% (Developed by Microsoft Gold Certified Partner) to scan and repair any theHunter.exe-related registry problems. Using a registry cleaner, you can automate the process of finding corrupted registry entries, missing file references (like the one causing theHunter.exe error), and broken links within the registry. Before each scan, a backup copy, which allows you to undo any changes with one click and protects you from possible damage to your computer. The best part is that eliminating registry errors can dramatically improve system speed and performance.

Warning: Unless you are an experienced PC user, we DO NOT recommend manually editing the Windows Registry. Using Registry Editor incorrectly can cause serious problems and require Windows reinstallation. We do not guarantee that problems resulting from incorrect use of Registry Editor can be corrected. You use Registry Editor at your own risk.

Before manually restoring Windows registry, you need to create a backup by exporting the part of the registry associated with theHunter.exe (for example, Hunter):

1. Click on the button Begin.
2. Enter " command" V search bar... DON'T CLICK YET ENTER!
3. While holding down the keys CTRL-Shift on your keyboard, press ENTER.
4. A dialog box for access will be displayed.
5. Click Yes.
6. The black box opens with a blinking cursor.
7. Enter " regedit" and press ENTER.
8. In the Registry Editor, select the theHunter.exe-related key (eg. Hunter) you want to back up.
9. On the menu File select Export.
10. On the list Save to select the folder where you want to save the Hunter key backup.
11. In field File name Enter a name for the backup file, for example "Hunter backup".
12. Make sure the field Export range value selected Selected branch.
13. Click Save.
14. The file will be saved with extension .reg.
15. You now have a backup of your theHunter.exe-related registry entry.

The following steps for manually editing the registry will not be described in this article, as they are likely to damage your system. If you would like more information about editing the registry manually, please check out the links below.

If you are faced with the fact that The Hunter slows down, crashes, The Hunter won’t start, The Hunter won’t install, the controls don’t work in The Hunter, there is no sound, errors pop up, saves don’t work in The Hunter - we offer you the most common ways to solve the problem problems.

First, check whether your PC's specifications meet the minimum system requirements:

• OS: Windows XP/Vista
• Processor: Pentium IV 3 GHz
• Memory: 1 GB
• Video: 256 MB (GeForce 7600/Radeon X1800)

Be sure to update your video card drivers and other software

Before you remember the worst words and express them towards the developers, do not forget to go to the official website of the manufacturer of your video card and download the most fresh drivers. Often, drivers specially optimized for them are prepared for the release of games. You can also try installing a later version of drivers if the problem is not solved by installing the current version.

It is important to remember that you should only download the final versions of video cards - try not to use beta versions, as they may have a large number of unfound and unfixed errors.

Don't forget that games often require installation for stable operation. latest version DirectX, which can always be downloaded from the official Microsoft website.

The Hunter won't start

Many problems with launching games occur due to incorrect installation. Check if there were any errors during installation, try uninstalling the game and running the installer again, after disabling the antivirus - often files necessary for the game to work are deleted by mistake. It is also important to remember that in the path to the folder with installed game There should be no Cyrillic characters - use only Latin letters and numbers for catalog names.

It also doesn’t hurt to check if there is enough space on the HDD for installation. You can try to run the game as Administrator in compatibility mode different versions Windows.

The Hunter slows down. Low FPS. Lags. Friezes. Freezes

First, install the latest drivers for your video card; this can significantly increase the FPS in the game. Also check your computer's load in the task manager (opened by pressing CTRL+SHIFT+ESCAPE). If before starting the game you see that some process is consuming too many resources, turn off its program or simply end this process from the task manager.

Next, go to the graphics settings in the game. First of all, turn off anti-aliasing and try lowering the post-processing settings. Many of them consume a lot of resources and disabling them will significantly improve performance without significantly affecting the picture quality.

The Hunter crashes to the desktop

If The Hunter often crashes to your desktop slot, try to start solving the problem by reducing the quality of the graphics. It is possible that your computer simply does not have enough performance and the game cannot run correctly. It's also worth checking for updates - most modern games have a system automatic installation new patches. Check if this option is disabled in the settings.

Black screen in The Hunter

Most often the problem with a black screen is a problem with GPU. Check if your video card is compatible minimum requirements and install the latest drivers. Sometimes a black screen is a result of insufficient CPU performance.

If everything is fine with the hardware and it meets the minimum requirements, try switching to another window (ALT+TAB), and then returning to the game window.

The Hunter won't install. Installation stuck

First of all, check if you have enough HDD space for installation. Remember that for the installation program to work correctly, the stated amount of space is required, plus 1-2 gigabytes of free space on system disk. In general, remember the rule - there should always be at least 2 gigabytes on the system disk free space for temporary files. Otherwise, both games and programs may not work correctly or may refuse to start at all.

Installation problems can also occur due to a lack of Internet connection or unstable operation. Also, do not forget to pause the antivirus while installing the game - sometimes it interferes with the correct copying of files or deletes them by mistake, considering them viruses.

Saves don't work in The Hunter

By analogy with the previous solution, check the availability of free space on the HDD - both on the one where the game is installed and on the system drive. Often save files are stored in a documents folder, which is located separately from the game itself.

Controls don't work in The Hunter

Sometimes game controls do not work due to multiple input devices being connected at the same time. Try disabling the gamepad or, if for some reason you have two keyboards or mice connected, leave only one pair of devices. If your gamepad does not work, then remember that games are officially supported only by controllers defined as Xbox joysticks. If your controller is detected differently, try using programs that emulate Xbox joysticks (for example, x360ce).

Sound does not work in The Hunter

Check if the sound works in other programs. After this, check whether the sound is turned off in the game settings and whether the sound playback device to which your speakers or headset is connected is selected there. Next, while the game is running, open the mixer and check if the sound there is muted.

If you are using an external sound card– check for new drivers on the manufacturer’s website.

Gaming news

GAMES Hotly anticipated by many gamers, Cyberpunk 2077 was shown at gamescom 2019 as part of the Google Stadia presentation, but something else interesting should appear very soon. In the meantime, NVIDIA has shared a short teaser...