Alcatel one touch firmware update. Firmware or flashing of Alcatel phone, smartphone and tablet. What are Alcatel Modem device drivers needed for?
Instructions for flashing the Alcatel One Touch POP 3 smartphone to new official or custom firmware, obtaining Root superuser rights.
If your smartphone received an error when updating the FOTA software. What to do? how to update?
If your Alcatel One Touch POP 3 phone has official firmware in which no changes were made and Root did not work, but an update error occurred via FOTA, then you need to do the following:
First of all, charge your smartphone to at least 70%, and the firmware should already be downloaded in the smartphone’s memory. Then turn it off and remove the battery from it, wait 2 - 3 minutes and insert it back.
While holding the Volume Up (+) key, hold down the Power key, when the screen turns on, release the Power key, and continue to hold the Volume Up key until recovery menu.
In the recovery menu, select a language that you understand (for example, Russian or english)
Next, we Wipe the system, select the ‘Delete cache’ option
Next is the item ‘Reboot’
The phone will reboot again with current version Software (former)
With your Alcatel One Touch POP 3 phone turned on, go to Settings > About phone > Software update (FOTA)
Remove downloaded update
Make sure that the Internet connection is stable while downloading the update package
Download the update again and install it, this time everything should be successful.
Full firmware for Android smartphone Alcatel One Touch POP 3
Before any actions with your smartphone, it is advisable to make a full backup; personally, I don’t do it (I have everything important files stored in the cloud). And you decide for yourself.
How to Backup Alcatel One Touch POP 3
If you have a smart phone with custom recovery ( TWRP recovery or CWM)
Insert an SD memory card into your phone, at least 4 GB
Boot into TWRP recovery mode.
Connect your phone to your PC and run CMD on your PC ( command line) enter the command in it:
If CWM is installed, then you need to mount the SD-Card, to do this, enter the command:
mount -t vfat /dev/block/mmcblk1p1 /storage/sdcard1/
To create a “Full device backup” enter the command:
For CWM
dd if=/dev/block/mmcblk0 | gzip -c > /storage/sdcard1/full.gz
dd if=/dev/block/mmcblk0 | gzip -c > /external_sd/full.gz
When a device backup is created, you will not see progress in cmd! At the very beginning of the line, the cursor will blink (as it should). Wait until the command appears. The process is long and takes 15-30 minutes.
Firmware for custom recovery on Alcatel One Touch POP
Installing custom TWRP recovery makes it possible to install custom firmware on your smartphone.
– First you have to find out what CUSTPACK is
CUSTPACK is a section in memory on which some of the system resources are located on our device, which differs from the generally accepted ones. In general, there is no CUSTPACK section, and all information is stored in SYSTEM.
– If you plan to stay on the stock firmware and you only need recovery for a convenient backup, then your choice should fall towards RECOVERY with CUSTPACK.
– If you plan to install custom firmware, then your choice should fall on RECOVERY WITHOUT CASTPACK. They require installing custpack2system.zip to revert to the common, single SYSTEM partition WITHOUT CUSTPACK. Installation is done with recovery.
Download the program SP Flash Tool and drivers, as well as the scatter file Attached file MT6580_Android_scatter.zip
as well as the TWRP 3.0 recovery itself (unzip after downloading)
Create a folder on your desktop and copy scatter.txt and recovery.img there. Moving the folder with SP Flash Tool to the root of drive C, go to the folder and run the file flash_tool.exe, open the Download tab, click Scatter-loading and select our scatter.txt (a table will appear in which there will be one checkmark next to recovery).
WITHOUT CONNECTING the smart, click on Download, and only then connect the USB cable with the TURNED OFF smart (the cable must be good). If everything is correct, then first the red scale will appear, then the yellow one and OK!!! (perhaps the drivers will be installed first). Turn off the smart phone and hold down the power key and volume + at the same time, wait for the screen to react and release, TWRP recovery
Flashing custom firmware via TWRP recovery
Download the required (liked) firmware on your PC and then copy it to your smartphone’s memory or memory card:
Download firmware for Alcatel One Touch POP 3 – FlymeOS 4.5, Cyanogenmod 12.1, Asus-POP3_5025
Then reboot your smartphone in TWRP recovery Mode, go to the mounting section (check the boxes for all partitions). Go to Cleaning / Cleaning Expert (check the boxes for Dalvik/ART Cache, Sustem, Cache, Data, Swipe to the right). Go to Installation / find *******.zip (here is the name of the firmware you downloaded for your Alcatel One Touch POP 3 phone), swipe to the right.
Official software from Alcatel, allowing you to update firmware various smartphones and tablets.
Through your computer device or laptop, the Mobile Upgrade S program will allow you to upgrade any portable device created by ALCATEL. To do this, the user needs to connect his device to the computer using a USB cable and find the corresponding firmware document. Next, you need to download the program from the official website of ALCATEL or on the current service. Please note that Mobile Upgrade S is only suitable for older devices. New gadgets produced by ALCATEL are updated “over the air”.
Application
Mobile Upgrade S will guide the user step-by-step through the update installation process, providing him with necessary instructions. Among the disadvantages of this program, you can identify what is not provided in it automatic way determine the model of the connected device. Therefore, you will need to select it yourself from the list in the window that opens.At the next stage, the user needs to check the connection and activity of the equipment. And at the same time, you need to check the “USB debugging” box in the settings to change the device parameters. Manufacturers don't mention this. The third step specifies the path to the firmware document. Next, the software update is installed accordingly. Please note that the Mobile Upgrade S program cannot downgrade to an earlier version.
Technical information
Since Mobile Upgrade S official program, then it is provided free of charge. The service is available in Russian, as is all accompanying documentation. What makes the user's work easier is that no driver installation is required to use the application.Main characteristics
- Has a simple and accessible interface;
- the user needs to determine the device model and the path to the ROM;
- guides you step by step to update your ALCATEL device;
- does not apply to new models;
- is freely available;
- It is impossible to downgrade to an earlier firmware version.
Alcatel One Touch POP 3, root, recovery
Annotation on flashing the Alcatel One Touch POP 3 phone to the latest official or custom firmware, obtaining Root superuser rights.
If your phone received an error when updating the FOTA software. How to flash an Android phone using How to flash an Android phone via a computer. include htc. What to do? how to update?
If the Alcatel One Touch POP 3 phone with the official firmware was not configured and Root was not even exited, but an update error occurred via FOTA, then you need to do the following:
First, charge the phone to at least 70%, and the firmware already downloaded in the phone’s memory will work. How to flash Alcatel One Touch. How to flash Alcatel One Touch POP 3, root, recovery. Then turn it off and remove the battery using it, wait 2 - 3 minutes and insert it back.
While holding the Volume Up button (), hold down the Power key, when the screen turns on, release the Power button, and continue to hold the Volume Up button until the recovery menu appears.
In the recovery menu, select a language you understand (for example, Russian or English)
Next, do a Wipe of the accounting software package, select the ‘Delete cache’ option
Telephone
will reboot again with the current software version (previous)
With your Alcatel One Touch POP 3 phone turned on, go to Settings > About phone > Software update (FOTA)
Remove downloaded update
Make sure that at the time of downloading the update package, the Internet connection is measured
Download the update again and install it, this time what remains for our client to do should be successful.
Full firmware for Android smartphone Alcatel One Touch POP 3
Before doing anything with your phone, it’s better to do a full backup; I personally don’t do it (I store all my important files in the cloud). And you decide for yourself.
How to Backup Alcatel One Touch POP 3
If you have a smart phone with custom recovery (TWRP recovery or CWM)
Insert an SD memory card into your phone, at least 4 GB
Boot into TWRP recovery mode
Connect
telephone
to the PC and run CMD (command line) on the PC and enter the command:
If CWM is installed, then you need to mount the SD-Card; to do this, enter the command:
mount.t vfat /dev/block/mmcblk1p1 /storage/sdcard1/
To create a “Full device backup” enter the command:
For CWM
dd if=/dev/block/mmcblk0 | gzip.c > /storage/sdcard1/full.gz
Read also
Having met the public's expectations, the manufacturer Huawei presented a budget modification Honor smartphone 7X called Honor 7C, made in a frameless design and capable of recognizing the user by face. The product is based on an eight-core 1.8-gi...
Facebook along with Cisco join the growing list of companies. Among them are LG, Ericsson, Nvidia, Sony, Amazon, Intel, Vivo and NTT Docomo, which decided not to attend the exhibition mobile communications. GSMA has completely banned travel to the Chinese province of Hub...
Methods for connecting a DVR without a cigarette lighter A DVR is not so much considered a necessary accessory in a car during frequent trips. Now most car enthusiasts have begun to think about purchasing it. Now this is no longer a whim, but, rather, neo...
Common task: setting up remote access to a computer that is connected to the Internet via a router. Solution: do port forwarding on the router. Port forwarding is also called port publishing or port forwarding. In British terminology...
Tim Cook continued his Asia tour this week with a trip to Bangkok, Thailand. The Apple executive documents the journey on his Twitter account. Cook began with a visit to the Buddhist temple Wat Arun on the western bank of the Thonburi Chao Phraya River.สว...
Today Google introduced " Google Play Instant", which allows you to play games without installing them on your device. The company announced the development of Instant Apps back in 2016, but it has only now been implemented. Now you can try the game...
dd if=/dev/block/mmcblk0 | gzip.c > /external_sd/full.gz
When a device backup is created, you will not see progress in cmd! At the very beginning of the line, the cursor will blink (this is how it should be). How to flash an Android phone. Complete step by step description the process of flashing any Android phone at home. They brought an Alcatel OT-7041D POP C7 phone, Unbrick ALCATEL ONE TOUCH POP C7 How to flash an Alcatel OT phone. Instructions for flashing the Alcatel One Touch POP 3 smartphone to new official or custom firmware, obtaining Root superuser rights. Wait until the command appears. The process is long and takes 15-30 minutes.
Reset Alcatel OneTouch 5065D (Hard Reset Alcatel OneTouch 5065D POP 3 (5) 4G)
My video will clearly show you how to reset the Alcatel 5065D, which allows you to remove forgotten graphics.
Firmware Alcatel
one touch 5036d, two ways.
I'm stitching Alcatel One Touch 5036Х/5036D POP C5 to stock version, 2 methods
Firmware for custom recovery on Alcatel One Touch
Installing a custom
TWRP recovery
makes it possible to install custom firmware on your phone.
- First you will have to find out what CUSTPACK is
CUSTPACK is a section in memory on which our accessory contains part of the system resources, which differs from the accepted ones. how to flash Lenovo phone. There is no CUSTPACK section in the accepted one, and all information is stored in SYSTEM.
- If you plan to stay on the stock firmware and for you recovery is only necessary for a comfortable backup, then your choice should fall towards RECOVERY with CUSTPACK.
- If you plan to install custom firmware, then your choice should fall on RECOVERY WITHOUT CASTPACK. How to flash an Alcatel OT Pixi 3 phone. They require installing custpack2system.zip to return to the accepted, one SYSTEM partition WITHOUT CUSTPACK. How to flash an Android phone via a computer? How. In this video I will show you how to flash an Alcatel One Touch Pixi 3 phone using the Mobile Upgrade S program Link to the program. Installation is performed with recovery.
Download the program SP Flash Tool and drivers, also the scatter file Attached file MT6580_Android_scatter.zip
also the TWRP 3.0 recovery itself (unzip after downloading)
Create a folder on your desktop and copy scatter.txt and recovery.img there. Home » Working with devices » How to install firmware on Alcatel One Touch 5020d. Like a telephone. Russian firmware Alcatel One Touch POP C7 7041d. Look for information on how to flash a phone or tablet. Move the folder with the SP Flash Tool to the root of drive C, go to the folder and run the flash_tool.exe file, open the Download tab, click Scatter-loading and select our scatter.txt (a table will appear in which there will be one checkmark next to recovery).
WITHOUT CONNECTING the smart, click on Download, and only later connect the USB cable with the TURNED OFF smart (the cable should be good). If everything is correct, then at first the reddish scale will appear, later it will turn yellow and OK. (maybe at first the drivers will be installed). If the phone is not Alcatel Pop Fit 4002X. How to put a melody on. Turn off the smart and press the power button and immediately the volume, wait for the screen to react and release, TWRP recovery
Read also
Flashing custom firmware via TWRP recovery
Download the appropriate (you like) firmware on your PC and then copy it to your phone memory or memory card:
Download firmware for Alcatel One Touch POP 3 - FlymeOS 4.5, Cyanogenmod 12.1, Asus-POP3_5025
Then reboot the phone in TWRP recovery Mode, go to the mounting section (check the boxes for all partitions). Go to Cleaning / Cleaning Expert (check the boxes for Dalvik/ART Cache, Sustem, Cache, Data, Swipe to the right). Go to Installation / find zip (here is the name of the firmware you downloaded for your Alcatel One Touch POP 3 phone), swipe to the right.
The firmware process will start, it usually takes about 5 minutes (don’t look that the scale has reached the stop, we wait for the reboot, it starts up for about 10 minutes WAITING! From time to time the process can take up to half an hour (depending on the firmware) we still wait and don’t get nervous.
After successful firmware, reboot the phone and enjoy the latest firmware.
Getting Root on
Alcatel
ROOT can be obtained from the menu
TWRP recovery
(if ROOT is not built into the firmware itself)
All you need to do is download the patch - BETA-SuperSU-v2.52.zip, copy it to the root of the device’s memory. Then reboot the phone into TWRP recovery mode and install this patch.In the Install menu, select the downloaded patch “BETA-SuperSU-v2.52.zi” and swipe to the right, after the firmware is finished (lasts a couple of seconds) reboot the phone.
Congratulations, you have Root super user rights installed on your Alcatel One Touch POP 3.
Post Views: 6
How to change the language on a tablet There are no teeth, what are the real ones, anyone knows how to change the language on a tablet, this should not cause difficulties. This is true when the tablet is in your native language. Even without knowing how it is done, they do it experimentally. Alas, h...
Previously only shown to journalists (including Wccftech) behind closed doors, Eying 2019's D3 demo of Dying Light 5 is now available to watch on YouTube. And you will definitely want to watch it, because it was one of the most...
Realme XT was launched in India last week and went on sale today. The new Realme XT, the first smartphone with a 64-megapixel main camera in India, went on sale today. The smartphone was launched in India last week and it went on sale...
Firmware ZTE phone Blade A510Even in modern, balanced Android smartphones from recognizable manufacturers, sometimes there is a situation that characterizes software developers for the device from a not entirely good side. Quite often, even relatively...
Although the United States sanctioned Huawei this spring and banned the use of American technology on its smartphones, only two of the nearly dozen devices the company unveiled today are not compatible. Google services. As it turned out...
USB driver for connecting your Alcatel One Touch phone to your computer. Versions are provided for Qualcomm and MTK platforms. The driver is suitable for everyone Windows versions.
Let's consider in detail the installation of both versions. If you are sure that your phone has an MTK processor, then installation will be as simple as possible for you. Unpack the archive and run the "Driver 1.0 Setup" file. Despite the fact that the installer does not have Russian language, you can easily install the driver, leaving all settings unchanged.
If you're not sure which processor your phone has, choose the second download option, which actually contains drivers for both platforms. Unpack the archive and run the Install.vbs file. If the script gives an error that it cannot find the path, then open the MTK and Qualcomm folders one by one and run the install.exe file in each folder. The installer has no interface and installs the driver in the background. You can also install the driver through the search dialog Windows drivers(if for some reason the driver cannot be installed automatically). In the driver search dialog, you need to specify the path to the entire unpacked archive.
This driver will allow you to connect your phone to your computer like a flash drive. You will be able to view it file system. However, you can use the Alcatel PC Suite program for greater convenience in working with phone content. It will allow you to view contacts, call logs, SMS, tasks in the organizer and much more. The program has a nice interface and fairly easy-to-use functions.
Alcatel One Touch is a phone that is different affordable price and the presence of slots for 2 SIM cards. The phone supports all the necessary technologies and is equipped with a processor of sufficient power. The phone is often purchased for children, older people, and for everyday use at work.
Alcatel One Touch S"POP 4030D is a once French smartphone that runs on Android 4.1 and has a rating of 3 out of 5 for power. This smartphone is quite productive. Here you can download firmware: custom or factory. You can also learn how to get root (superuser rights) or reset settings.
Root Alcatel One Touch S"POP 4030D
How to get root for Alcatel One Touch S"POP 4030D see instructions below.
First try universal utilities for getting root on MTK for the One Touch S"POP 4030D model
- (root in one click)
- (a collection of root utilities in one)
If it doesn’t work and SuperUser doesn’t appear, then ask for help in a special topic
Characteristics
- Standard: GSM 900/1800/1900, 3G
- Type: smartphone
- Operating system: Android 4.1
- Case type: classic
- Case material: plastic
- Number of SIM cards: 2
- Weight: 122 g
- Dimensions (WxHxD): 61.2x115x12.2 mm
- Screen type: color TFT, 262.14 thousand colors, touch
- Type touch screen: multi-touch, capacitive
- Diagonal: 3.5 inches.
- Image size: 320x480
- Pixels per inch (PPI): 165
- Automatic screen rotation: yes
- Type of ringtones: polyphonic, MP3 ringtones
- Vibration alert: yes
- Camera: 3.20 million pixels, 2048x1536
- Video recording: yes
- Max. video resolution: 640x480
- Max. Video frame rate: 30fps
- Geo Tagging: yes
- Front camera: yes, 0.3 million pixels.
- Video playback: H.263 MPEG4, H.264
- Audio: MP3, AAC, WAV, FM radio
- Voice recorder: yes
- Headphone Jack: 3.5mm
- Interfaces: USB, Wi-Fi, Bluetooth 4.0
- Satellite navigation: GPS
- A-GPS system: yes
- Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, email POP/SMTP, email IMAP4, HTML
- Processor: MediaTek MT6575, 1000 MHz
- Number of processor cores: 1
- Video processor: PowerVR SGX531
- Built-in memory: 4 GB
- Volume accessible to the user memory: 2 GB
- Volume random access memory: 512 MB
- Memory card support: microSD (TransFlash), up to 32 GB
- Additional SMS features: text entry with dictionary
- MMS: yes
- Battery type: Li-Ion
- Battery capacity: 1400 mAh
- Talk time: 5:00 h:min
- Waiting time: 254 h
- Operating time while listening to music: 35 hours
- Speakerphone (built-in speaker): yes
- A2DP profile: yes
- Sensors: light, proximity
- Search by book: yes
- Exchange between SIM card and internal memory: There is
- Organizer: alarm clock, calculator, task planner
- Equipment: phone, battery, Charger Micro-USB, Micro-USB data cable, stereo headset, quick start guide
Review of Alcatel One Touch S"POP 4030D
I've had my smartphone in my hands for 10 months now. Cool device, the modem is excellent, the camera is enough, speakers from the computer, radio music, from morning to night in the garage, the charge is minimal, the Internet does not slow down, I am happy with two SIM cards... If you also take into account that the price is 1990 rubles... +200 film.
A very convenient phone, there were no problems until the system broke.
Firmware for Alcatel One Touch S"POP 4030D
Official firmware with the most latest update SVN: 01003 -
Custom firmware AOSP 4.1.1 -
Emotion L V1 (for flashing via stock recovery) -
Firmware for Alcatel One Touch S"POP 4030D can be found in the thread. In addition, first download the necessary software for flashing
What information do you need to know for flashing?- Brand/model [desirable] - Alcatel/One Touch S"POP 4030D
- Processor - MediaTek MT6575, 1000 MHz
- LCD Driver (version)
- Kernel (version) [desirable]
Before flashing and during the firmware selection process, check the basic TX ( specifications) through the program
What custom firmware are there?
- CM - CyanogenMod
- LineageOS
- Paranoid Android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- FlymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and shortcomings of an Alcatel smartphone and how to fix them?
- If One Touch S"POP 4030D does not turn on, for example, you see White screen, hangs on the screensaver or the notification indicator only blinks (possibly after charging).
- If stuck during update / stuck when turned on (needs flashing, 100%)
- Doesn't charge (usually hardware problems)
- Does not see the SIM card (SIM card)
- The camera does not work (mostly hardware problems)
- The sensor does not work (depends on the situation)
Hard Reset for Alcatel One Touch S"POP 4030D
You can do it in a very simple way:
- Settings->Backup and reset
- Reset settings (at the very bottom)
How to reset a pattern key
How to reset graphic key, if you forgot it and now cannot unlock your Alcatel smartphone. On the One Touch S"POP 4030D model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
