​ The online store website offers you to buy Carbon film. This is a modern self-adhesive vinyl covering that exactly imitates the texture of natural carbon fiber, and at the same time is much cheaper in cost. We offer the following types of film for sale:

• 2D carbon. It is a static carbon pattern printed on vinyl film. To protect the drawing from damage, it is covered with a special laminating layer.
• 3D carbon. like this carbon film You can buy if you want to decorate the surface with an image with a 3D effect. The coating is made based on the technology of simulating the interweaving of carbon fiber threads and microscopic straight strips are fixed to the film.
• 4D carbon. It differs from 3D carbon with a more expressive texture due to the laminated surface.
• 5D carbon. Characterized by a more similar three-dimensional carbon fiber structure. The film has a thickened glossy layer, unlike 4D carbon.
• 6D carbon. This carbon film on a car is the most realistic imitation of real carbon, so it is more expensive than other types. It is based on a 4D carbon fiber texture and a glossy 5D carbon fiber laminate.

5 reasons to buy carbon film

Anyone who has come across a vinyl film has the idea that it can be used to quickly and inexpensively update the design of a phone. You can also do appearance make your phone more impressive or hide scratches on the case. The catch is how to do it yourself?

Selection of material and tools

To update the phone case, a regular monochrome film is suitable: white, black, red, green. To improve the design, it is better to use gold, silver, mother-of-pearl film or film that imitates leather or some other texture.

In addition, for work you will need:

• Alcohol or other fat-soluble liquid;
• Cosmetic disk for wiping or napkins;
• A scalpel, or a knife for art work, or a regular stationery knife;
• Hairdryer for women;
• Cutting board.

Pasting stages:

First of all, you need to cut a piece of film that fits the size of the phone case part with a margin of 1-1.5 cm. This centimeter excess will allow you to firmly grasp the film and confidently pull it while pasting.

Then you need to thoroughly degrease the surface of the phone so that the film sticks better. Remove the backing from the film and apply the adhesive side to the phone part.

Then you need to simultaneously press and straighten the film from the center to the edges. At this stage and until the end of the work, it is important not to leave air bubbles under the film.

Sometimes the phone body has irregularities in the form of grooves and borders. In this case, you can cover only the flat part of the phone with film and cut the material exactly in the direction of the groove. In this case, the bending of the body will remain intact.

If you need to completely cover the body, then it is better to roll up the film to avoid unpleasant scuffing of the coating in the future. However, the bends may prevent the lid from fitting into place; in this case, you will have to cut the film flush.

To cover the rounded sides of the case, the film needs to be heated with a hairdryer, in which case it will become elastic and more pliable. It is important to ensure that the film does not overheat, as it may tear. It is better to warm up the film and stretch it in several approaches.

For better adhesion of the film, several cuts can be made at the corners of the body. The last step is to smooth the film on the back of the phone parts, trim off excess material and assemble the device. In order for the film to take its final shape, it is recommended to let the phone sit for some time.

Thus, you can cover your phone with film yourself, the main thing is to be careful and diligent.

Watch another one useful information— Moscow is cheap!

Articles and Lifehacks

Carbon film for phone Lately has become a very popular option for adding personality. This kind of film has long been used in car tuning, but, of course, the sizes of the phone and car wraps are not comparable.

That is, for a phone, individuality and a stylish look will cost much less. Carbon films come in different thicknesses, textures and colors, although, of course, buyers usually choose the usual black color.

A thinner film will be easier to stick, and a thicker film will provide better protection from chips and scratches.

Phone wrap

• The carbon film is glued as follows. Wash your hands well first. We also clean and degrease the surface of the phone.
• It is advisable not to use alcohol solutions, as they can damage the protective layer of the screen or decorative elements. It is best to use special wet wipes.
• Carbon films come already prepared for specific model, that is, cut out according to its shape, or can simply be a rectangular piece.
• In the latter case, you will still need a sharp knife to cut pieces of the desired size.
• But, of course, it is best to use a ready-made kit; although it will cost more, it will provide fewer problems and a better final result.
• When gluing the film, you should start with elements with a cutout, for example, with pieces for covering a screen or camera.
• Peel it off from the paper base by lightly prying up a corner, then lightly place the film on the phone and, without pressing too much, smooth it from the center to the edges.
• This will avoid any air bubbles stuck in the middle. After the film is in the position you need, press it against the telephone for good fixation.

Where to buy carbon film

You can purchase carbon films in many online stores, which are widely represented on the Internet. Check with the sellers for the set that is suitable specifically for your phone model.

There are also companies that offer to cover your telephone themselves; it costs more, but it means less fuss for you.

Why do you need carbon film covering?

Below, after the advantages of this coating, it will be described in what cases to buy a cover, or leave the one that is better.

How to do it yourself?

Reliable protection

Every year gadgets become more and more functional, but at the same time more fragile, so protecting your favorite devices is also becoming more important. new level. To protect your phone with carbon film in Kyiv, all you have to do is contact our professional who will cover your phone, smartphone, or tablet. This will protect the case from scratches, chips and abrasions, and if the film is damaged, our specialist will be able to restore its former appearance. And most importantly, pasting with carbon film in Kyiv occurs on site within 30 minutes.

Stylish and individual

Covering with carbon film will make your phone or smartphone stand out from other similar ones in Kyiv. Our master works individually with each client to ensure that your model is perfectly covered. To do this, all external parameters are taken into account: dimensions, bends, recesses, buttons, sensors, camera. After which the tablet or smartphone is transformed into a unique gadget. And an ordinary sticker will look like consumer goods if you use carbon film and skillful hands.

Breathe new life into old phone(smartphone)

Covering the cues with carbon film will not only protect the case from possible scratches, but will also give a second chance to an old scratched phone that has been through a lot, and may be kept in memory of past events. In any case, after covering with carbon film, any item will look stylish and modern and will again delight its owner.

How to do it yourself?

If you still decide to buy and do everything yourself, then you need to prepare tools, such as: a set of repair screwdrivers for small equipment, a sharp lancet, a ruler, a pencil, or anything convenient for marking, manicure scissors may also come in handy. This process is labor-intensive, so save your nerves and don’t be upset if it doesn’t work out well the first time. The main thing is to measure correctly, make the necessary cuts and holes in the film, then smooth it out and remove the excess.

And now a little about when it becomes necessary to make a choice: carbon film, or a case for a tablet, or a phone.

If a smartphone (tablet) is made of expensive materials, such as metal, glass, special fabric (like in a Motorola), or leather coverings and other things that already look luxurious and it would not be logical to modify them in the way proposed here. The only exception is severe damage to the case and lack of desire or money to buy a new one. Since the flagship case can cost above $100.

Therefore, when the acquired miracle is still new, you need to buy a case if you often lose everything. If you don’t want to spoil the appearance with thick layers of silicone, rubber, leather, etc. - there are thin, transparent, invisible ones.

As a last resort, there is a way out in partial stylization, both cut out at the factory (sticker) and decorated in our workshop in our store.

IN modern world smartphones and tablets accompany us everywhere and at any time of the day, which, of course, affects their appearance. Small abrasions, deep scratches and even cracks from accidental falls or blows - each of us has encountered this. But you really want to preserve the presentation of your device for as long as possible. And here we remember about covers as the most common means of protection. However, all cases have disadvantages - they increase the dimensions of the device and do not allow you to enjoy using the gadget exactly in the form in which the manufacturer intended and implemented it.

Relatively recently, a more advanced method of protection has appeared, devoid of the described disadvantages - this is a high-quality vinyl film. It will reliably protect the device from all sides and will highlight the individuality of the owner thanks to its unique design. Next, we will look at the features and advantages of the new type of protection.

Covering devices with vinyl

This is a reliable and universal protection for the body of your gadget, which can also transform its appearance, thanks to a variety of textures, graphics and colors. The film is made to order, according to the client's requirements, using special equipment. The client can choose a design from a variety of options in our catalog or use their own images, such as photographs or drawings.

The finished products perfectly match the dimensions of your device, and all the slots exactly match the holes on the device body, for example, with the speaker grille, camera lens, etc. The entire process is carried out manually by KNOW-HOW experts who do not make mistakes and guarantee excellent quality. After pasting, the gadget will be transformed, will receive reliable protection from external damage and will delight its owner with a stylish appearance. By the way, the protective film can be made from two types of vinyl.

Differences between vinyl and photo vinyl

Vinyl is made on a plotter from very high quality films 3M, 5star and SCORPIO premium. These brands are well known in the automotive business because... engaged in the production of auto vinyl. Vinyl film can have different textures that imitate materials such as carbon, stone, leather, suede, etc. The manufacturing process takes place in two stages. First, the plotter cuts out the sticker and the picture on it. Next, the excess elements are removed manually, after which we receive the finished product.

Photo vinyl is made from a special film onto which an image is applied using a printer. The top of the graphics is covered with a layer of transparent “armor” and then cut out on a plotter. Excellent print quality is achieved through the use of inkjet printer, due to which the highest detail of the image is achieved.

Device wrapping

Almost any device can be covered, from smartphones to video consoles. The model and brand of the manufacturer also do not matter. KNOW-HOW experts will produce a digital mock-up of the film that will 100% match the dimensions and design features your gadget.

The pasting procedure takes no more than 15 minutes, and the process of creating a unique design and image processing takes from 10 to 60 minutes. The result will pleasantly surprise you not only high quality work, but also durability. Vinyl has incredible wear resistance, because this is the film used to cover cars and motorcycles!

Another nice thing is that we use a film with a special self-adhesive base, which does not leave marks on the device body after removal. Thus, you can easily remove the film yourself to return the device to its original appearance or replace the old vinyl with a new stylish “armor”.

Let's summarize

Vinyl wrapping is not only a reliable way to protect your devices from possible damage, but also an opportunity to give a unique look to your favorite gadgets. An undeniable advantage of vinyl “armor” is its thin profile, unlike cases, which inevitably increase the size of the device. Removing the film leaves no marks on the case. Vinyl also has incredible durability. Add to this the low cost and here we have the best protection option for any device without any covers!