Every Internet user has encountered a situation where the browser notifies with the message “Timed out waiting for a response from the site” about the impossibility of visiting a particular site. This happened for various reasons and you will definitely find a solution to this problem below in the article.

What does the browser error ERR_CONNECTION_TIMED_OUT mean?

First of all, in order to successfully resolve the ERR_CONNECTION_TIMED_OUT problem, you need to clearly know the reasons for its occurrence, as well as some features of sites and browsers. The reasons for the message about the timeout of waiting for a response from the site can appear both on the server side and on the client side in the browser. When you click on one of the links on any site, the client or simply your browser sends to the server of the site you accessed a request to display it in it (the browser) desired page. But the developers decided that the browser cannot wait forever for a response from the server; when the site does not respond for some reason, it waits for some time and then informs the user that the site you are accessing is not available.

Each browser has its own waiting time for a response from the site. If this waiting period has expired, the browser displays a message that the site is not responding.

Main reasons for notifying expired waiting for a response from the server:

What to do when you receive an error message about the timeout for a response from the site

Let's take a closer look at the options that cause the browser to notify us of an error. If you have an error only once on one site (for example: ru.4game.com, www.youtube.com, vk.com, www.twitch.tv, steamcommunity.com, 192.168.0.1), try simply reloading the page or update it by pressing F5 or CTRL+F5. We will also exclude the option when you have obvious problems with the Internet, it is turned off.

We fix network problems and configure it

Step 1: Check your connection first to make sure the error is not on your end. If all sites launch in your browser, but some do not, then reboot your router. This can be done in its settings. You can also try disabling and enabling it if you have a dynamic IP address.

Step 2. The reason for the message may be a very slow Internet, this happens when you use mobile internet in remote regions with poor computer signal. In this case, check the speed via online services to measure the speed of packet transmission and reception. If you fail the speed test, contact your provider for advice.

Step 3. It would be a good idea to look through. The DNS address section must contain the correct information for your network. If the address does not match what it should be, delete it and fill it in with what is needed. There is a possibility that your system is infected with a virus and is independently reconfiguring your browser menu items. In this case, use antivirus software. IN ideal, in addition to the established antivirus programs use one-time and utilities from Kaspersky, Dr.Web, Nod32.

Step 4. In the router settings, you should check the MTU parameter to eliminate the “Timed out waiting for a response from the site.” He can often "fly off". The meaning is different for different networks and routers; you need to find it on the Internet specifically for your model and network and reconfigure it. If the MTU settings are incorrect, it is often impossible to open various social media: VKontakte, Odnoklassniki, as well as video hosting YouTube, etc. Or their loading will take a very long time.

Cleaning the browser for proper operation

Also pay special attention to your browser settings. Open the cache in the settings and clear it ( and ), do the same with cookies.

You should play with the built-in modes and other settings, namely: activate the turbo mode, then deactivate it. Use different proxy server settings, enable hardware acceleration, if that doesn’t help, set it back. This is not done because we don’t know what to do and use the “poke method”, but precisely because all of the above instructions may cause downtime while waiting for a response from the server.

Go to your browser history and clear it. Open browser plugins and add-ons, remove all unimportant and secondary ones, they can not only cause browser errors, but also slow it down. All of the above reasons apply to the client side, but they can also appear on the server side. The site may be subject to customization and therefore not available to visitors. Try going to the site's forum - many reputable resources create forums separately from the main sites precisely in order to notify users about any events on the site due to which it is temporarily unavailable, for example, hacker attacks.

It happens that when you try to establish an Internet connection or access a certain resource on the Internet, instead of connecting, the browser writes: “The timeout interval for the request has been exceeded.” Not every user knows what this problem is, so it’s worth considering this error a little more detail. It can be corrected, but to do this you will have to use the diagrams given below.

Request timeout exceeded: essence of the problem

The error itself and its consequences look in the simplest case in a well-known way. You are trying to access some resource or connect to World Wide Web, computer device sends a request to the outside world, but receives no response.

Why? Yes, only because the Network or communication device cannot initialize the external IP of your computer. So it turns out that packets simply do not exchange. The timeout interval for the request has been exceeded, the Network does not respond simply because your device is not detected, despite the fact that in the protocol settings all parameters are set to automation (meaning obtaining IP addresses, DNS and using the default gateway).

In other words, packets do not reach your device from the outside. And this is a necessary condition for communication.

Request timed out: how to fix the problem in the fastest way?

If such a problem has arisen, you can use the most common function. While we are not looking at more complex methods like checking ping, we are trying, so to speak, to get rid of the problem using the simplest and most accessible methods.

Let's launch command console as an administrator (cmd in the “Run” menu or manually launching the file in the System32 directory via the right-click menu), then enter the configuration reset commands.

The sequence looks like this: first - ipconfig /flushdns, then - nbtstat -R and nbtstat -RR, after that - netsh int reset all and netsh int ip reset, and finally - netsh winsock reset. Their use clears (resets) the system settings, after which you can reboot and try to access the required resource or establish a connection to the network.

Command line and ping

But this method is the simplest and, depending on the root cause (which, by the way, no one can pinpoint yet), does not always help. After all, a message may appear again stating that the timeout interval for the request has been exceeded. What to do in such a situation?

You will have to use special ping commands, which allow you to accurately determine whether there is a response to an outgoing external request from your computer terminal.

For example, if you are using a router and wireless network WiFi, on the command line you need to set up a ping procedure indicating the internal address of the computer (usually ping 127.0.0.1). After this, packet exchange should begin. The screen will show that so much has been sent and so much has been received.

But here’s the problem: the ping seems to be working, but there is no connection. Why? Yes, only because the packets were sent to an internal address, and the loopback function worked. For a more accurate check, you should check another random address. And here you will see accurate statistics on sending, receiving and losing packets.

Checking the configuration

Another common technique for resolving the request timeout issue is to use IP configuration commands. The fact is that the previous method is still more informative and not instrumental. And this is even if the ping command is used. “The timeout interval for the request has been exceeded” is far from the worst message that the system can produce.

To configure, and with the correct checking of options, you must use the ipconfig command entered in the console. It is with its help that you can find out all the parameters installed in the system. If you need to find out the parameters and settings of all users registered in the system, a special suffix (ipconfig /all) is added to the main command via a right slash.

After this, it makes sense to ping the address of your own router (either 192.168 ending with a 0.1 dot, or 1.1). If it is not detected, that is where the problem lies. If everything is fine, we move on.

Tracing

In some cases, one of the options for checking and correcting the problem that the timeout for a request has been exceeded (Trove, for example, when accessing online games), it makes sense to check the trace. It involves the transmission of packets from your computer terminal to the outside world. To do this, you can use it with the addition of suffixes (for example, in the simplest case, the trace is checked using the combination tracert it.sander.su).

The command itself allows you to determine the source of the failure or the stage of packet passage at which it occurs. Typically the TTL trace value appears as a positive integer. However, the router can reduce it by one unit. If this indicator is set to zero during packet exchange, the tracing ends. You'll have to use the route print command to view it, but that's a separate topic.

For cases where a message appears stating that the timeout interval for the Trove request has been exceeded, you can use specific remedies for the situation in the form of the Glyph utility running as an administrator. If it doesn’t help, you can use any optimizer program like CCleaner, which can clean and defragment the system Windows registry. As a rule, an error of this type is almost always associated precisely with the presence of erroneous or outdated entries and keys in the registry. It’s better not to get into the register yourself, otherwise the whole operating system can be brought to a state of complete inoperability. And even tracing won’t help here. Request timeout exceeded - what to do now?

Setting up the Ethernet interface

If the above suggested options do not give a positive effect, and the message that the timeout interval for the request has been exceeded appears again and again, you will have to set up network connections, but not in a standard way changing the configuration of the network itself or the adapter used, but using the command line. Please note command line It almost always helps to solve most computer problems if you know which commands to enter for specific purposes.

First we look at the list of settings that is called netstat command, to which you can add the suffix “-n”, “-na” or “-nb” to display data not in the form of a digital code.

Now you need to enter the line to view your own address, and then use the combination presented above (as a rule, this works in all systems).

Enable nodes

Try calling the settings for the same Internet Explorer or any other browser used. Here you need to delve into the parameters of trustworthy resources. Their addresses must be included in a special list.

If this procedure does not work, the message will appear again (“Request timeout exceeded”). What to do? Just add sites that are impossible to log into to the antivirus exclusion list, and also create a new rule for the system firewall indicating the full path to executable file browser programs.

Conclusion

That, in fact, is all that concerns a failure when a situation occurs due to the fact that the waiting interval for a request has been exceeded when trying to access some Internet resource or conduct a communication session. The most simple solution, short of reinstalling the system, it will be a normal reset. But this may not be the case, so you will have to delve into the network connection settings. But it is recommended to set parameters from the command line, and not using the standard methods provided in the system. This option is much preferable only because the command line uses tools hidden from the user's eyes that are not available in normal mode, when they are accessed using standard means.

Probably every user faces problems accessing necessary sites. Thus, the most common connection failure is the error “Timed out waiting for a response from the site,” which can also be encrypted with the ERR_CONNECTION_TIMED_OUT code. We have analyzed the main causes of this failure and, accordingly, their solutions.

What does it mean?

So, first you need to understand why the failure occurs. The fact is that when you go to a website, the browser sends a series of requests there. Each browser has a time limit configured during which it waits for a response. If within the allotted time Feedback was not installed - you will receive this error.

There can be several main reasons for the failure:

1. Lack of connection to the site due to failures of its servers;
2. A cluttered browser or its settings are messed up;
3. Lack of Internet access on the user’s part, or incorrect settings;
4. Blocking a resource by region.

What to do to solve?

In general, let's go over the main points to solve the connection problem. But first, we should talk about the moment when the failure is isolated - in this case, you just need reload the page several times using CTRL+F5. Also, let's immediately discard the obvious - your Internet is disabled.

Network Settings

Checking the browser

Other reasons

1. Other, less frequent reasons are work on the part of the web resource. In this case, just wait, or ask the Host what’s wrong.
2. Don’t forget about the currently relevant sanctions and blocking by region - perhaps this is exactly the case for you. Try changing the IP address and connect to the site. We've already talked about all the best VPN services for bypassing. Here's a video of how it works.

Conclusion

I tried to describe the most common variants of the error “Timed out waiting for a response from the site” and their solutions. In fact, there can be many sources of communication failure. As I already wrote, in my case the MTU was knocked down. If the article helped you, write what your problem was. Thank you.

What does it mean "timed out waiting for a response from the site"? What to do?

If you wait a long time for a site to open, and then the browser displays the error: The timeout for waiting for a response from the site has been exceeded, this means, first of all, that the site is currently unavailable, or you have a very slow Internet connection that does not allow you to open this site, in any case you should reload the page and try again, usually the second time you can access the site, unless of course it is blocked.

The inactivity time has been exceeded, there is no information input/output, a response from the server (site) cannot be received. Perhaps it's due to an internal technical problem. If you have several sites doing this weird thing, you’ll have to dig into the problem on your own.

Perhaps it's all about the browser (for example, there is an old update). Try logging in from another one.

Disable your antivirus - it may be blocking the page.

Try restarting your network connection(I do this through Computer - Properties - Device Manager - Network adapters— Disable/Enable).

Perhaps the page is blocking your IP address. In this case, install the Tor browser, it is able to access sites that are inaccessible from other browsers, because... he uses a proxy in his work.

The problem may also be that your Internet speed is too low. In this case, either solve speed problems by switching to another provider, or try accessing the site through mobile version(if it exists, of course).

If you are referring to specific errors, they are usually displayed as three numbers, such as 408, 502, 504, etc., then in this case it is a temporary problem with accessing the site.

It usually doesn't last that long, you just have to wait a little.

If this is your site, then in this case there are obvious problems, in the second case there is overload from users or attacks, in the third the server with the data necessary to display information, for example, for SQL databases, is unavailable.

When the hosting itself does not work, then you undoubtedly need to contact support so that they can solve the problem if they themselves do not notice it.

Timed out waiting for a response from the site means that the time required to connect to the site has expired, perhaps the problem is a very slow Internet.

In this case you need to do:

• check your internet connection,
• refresh the page.

If this does not help, then you need to check your firewall and proxy server settings.

Well, look, you wanted to go to VK, press login, everything is going on there in the browser in the left corner, such a small line will be written sending data to the site xxx or something like that and in the end the site simply does not receive your data due to any delay, so it crashes and says Waiting time exceeded, there may also be a downside, that the data does not go directly from the site to the user.

How to solve

1) Restart the Internet

2) Check if the antivirus has blocked the resource (site)

3) restart (browser)

4) wait a little, maybe the site is just loaded

Good luck

If you get the error “Timeout waiting for a response from the site” when you want to access the page, it may be that either you have a slow Internet connection, or this moment the site is unavailable.

You can try to connect to the site again by clicking the Refresh current page button. If it doesn’t work, clear the cache, turn off and turn on the browser, and check your Internet connection.

This means that it was not possible to contact the site within the usual time allotted for this. This can happen for a variety of reasons (for example, the site administrator is updating the antivirus or something else). Most often you just need to wait or reload the page again.