With the advent of new devices on the technology market, users have a greater choice, determined by their need for something new, interesting, and unknown. With these needs and devices, uninvited guests also come to us in the form of bugs, problems, glitches and everything else. In this article we will try to figure out the question of how to connect a Xiaomi smartphone (in our case, Redmi 4x) to a computer, since it is of interest to device owners very often.

Be prepared for the fact that you will have to use additional software; in some cases, someone will be forced to reset the device to factory settings and connect to the computer again and again, download “incomprehensible” software, and so on.

Possible causes of problems

Below is a list possible reasons There is a problem connecting the phone to the computer:

• Non-original components (specifically USB);
• Lack of drivers;
• Incorrect connection method;
• System problems with the device, etc.

Of course, it is not presented above full list, in fact it is much more voluminous. Next, we will try to describe all the ways we know to solve the problem and try to figure out not only how to connect your device to a computer, but also tell you how to make this process easier. These tips should help even if your laptop or computer does not see your phone.

Connection methods

1 Method - Standard

If, when you connect your phone to your PC, it doesn’t appear in the “My Computer” section. desired device or it appears, but there is no content and the folder is empty, this does not indicate a problem. IN latest firmware The data transfer function is activated only upon request; by default, only the charging mode is activated.

When you connect the gadget, a connection notification should appear at the top, click on it.

If you didn’t have time to “catch” the notification, just lower the curtain down, it will be there, tap on it.

A dialog box appears in front of us where you can select the connection mode, select “data transfer”.

After these manipulations, the smartphone simply must appear as a connected device.

Method 2 - Turn on debugging mode

The method described above is the simplest, and if it does not help you, consider the next option from the same “simple” category. Follow the following path on your phone:

1. Settings;
2. Advanced settings;
3. For developers;
4. Activate "USB Debugging".

After these steps, connect the gadget to the computer, the connection should be established successfully, then select the data transfer mode - see method 1.

If there is no “For Developers” item in the menu, there are two reasons for this:

1. You have not activated developer mode;
2. This mode blocks the installed antivirus.

To activate the “secret” mode, go to the “About phone” item in the settings, click 7 times on the line with the MIUI version, after which the mode will be activated and this item will appear in the corresponding section of the menu.

In the case of an antivirus, you need to pause its operation (active protection) in order to see the required menu item.

We enable the MTP method, thanks to which you can access the phone as a multimedia device. An alternative option for the same action: dial *#*#13491#*#* in the call menu. This menu appears on each device, having almost the same appearance, so it makes no difference whether you have a Xiaomi Redmi 5a or a Redmi 4x.

Method 3 - Multimedia mode

Alternative 2 ways if something goes wrong. Dial in the call menu *#*#13491#*#* , as soon as you type the last character from a given combination, a dialog box should appear. In it we select the method - MTP, thanks to which we will be able to access the phone as a multimedia device.

This menu appears on each device, having almost the same appearance, so it makes no difference whether you have a Xiaomi Redmi 5a or a Redmi 4x.

Method 4 - Update drivers

It is quite possible that the connection problem is not in the phone, but in the PC itself, or rather in the drivers. If you have an original USB cable, then we rule out that the problem is there. You should definitely try using different USB ports on your computer, for example, plugging them into the rear connector. If this doesn’t help, then you can immediately try updating the drivers manually.

1. Go to the device manager on the PC;
2. Expand the “portable devices” section, your Xiaomi phone should be displayed there;
3. Right-click on the smartphone to bring up the menu and select “Update drivers”;
4. Select "Automatically search for updated drivers".
5. If the problem has not been corrected or no new versions of drivers were found, then download the drivers yourself and indicate the path to them.

An alternative this method The purpose of this is to install the Mi PC Suite program, which already contains all the necessary drivers; more details about this program will be written below.

Method 5 - troubleshooting connection problems

Connecting any device to a computer triggers several processes at once. Now they are automated, but not always everything goes as it should. For example, if the computer does not see the smartphone even after updating the drivers, then the problem is something else. For such cases, there is a troubleshooting wizard in Windows OS.

1. Go to the control panel
2. Select "Hardware and Sound"
3. Open "Devices and Printers"
4. In the "Multimedia Devices" section, find the Android device, right-click and select "Troubleshoot";
5. The troubleshooter will check the connection and fix it if possible or make specific recommendations.

It is quite possible that your smartphone will be identified as an unidentified device and will be located in a different section with a different icon. If, when connecting to the PC, no new devices are found, then the problem is not software; you need to check the ports and cable.

6 Method - use the terminal (root)

One of the most effective ways solving connection problems.

After installation, connect the phone to the computer and write several commands in the program. It is important to understand that with its help we will have access to the phone in USB storage mode. Enter the first command and press Enter:

By executing the su command, we enable superuser rights (must be present) and confirm our choice. The next phrase will be more complicated:

setprop persist.sys.usb.config mass_storage,adb

after which we press Enter on the smartphone, that is, the enter button.

If you want to log into the device using the MTP method (as a multimedia device, and not in flash drive mode), then do the same, only with the second command (where mass_storage is replaced with mtp) enter:

setprop persist.sys.usb.config mtp,adb

Remembering devices such as Xiaomi Redmi 5 Plus and even Xiaomi Mi Max, you are glad that such problems happen to them extremely rarely, although it is strange why they arose with the fourth Redmi. Okay, let’s look into the issue further, and let the developers who assembled the smartphones look for the root of the evil.

If the connection is only in camera mode

Having considered the five main ways to solve the problem, I would like to discuss and Alternative option, classified by us separately because of its simplicity and unusualness.

If the phone is connected in camera format and not as a drive, try dragging necessary files into a folder with photos, and then move them to the desired sections via your phone. But this is for those who don’t want to do anything at all, trying to solve the problem without effort.

Additional software

PC software - Mi PC Suite

This is an alternative to the usual driver installation, since this software combines many components for successful synchronization of the gadget with the computer.

Thanks to this program, you will not only connect your smartphone to your PC, but also get additional features:

• Backup and data recovery;
• Creation and management of screenshots;
• Computer Internet access;
• Firmware update;
• File manager.

If after installing the software the connection problem is not resolved, then go to the “Task Manager”, find your unidentified cable and phone, click on any of the items, and then follow the standard scheme, that is, “Driver”, “Update”, indicate the path

C:\Users\PCName\AppData\Local\MiPhoneManager\main\Driver

QCustomShortcut - If connection settings are missing

Next we will talk about a program (not available in the market), thanks to which you will be able to access the connection settings if they disappeared after your first choice, which also happens quite often. In its second field Package set the item com.android.settings, and in the Class field – com.android.settings.UsbSettings. Click the Create Shortcut button and you're done.

Now, by clicking on the shortcut, you will have access to the connection settings.

Third party file transfer programs

If you need to transfer a couple of files from your computer to your phone or vice versa, but the USB connection does not work, you should take a closer look at programs from third-party developers. Can be used for data transfer cloud storage: Yandex disk, Cloud mail, Dropbox, Google Drive etc. Then click

It is worth knowing that the transfer of large files is limited to 4GB in size, since Xiaomi uses file system fat32.

If, when copying a file, the process hangs and the transfer does not complete, then try creating a separate folder on your smartphone and copy the required file into it.

Results

The main connection problems are in the little things, and the first and simple ways their solutions should help in most cases, because sad as it may be, this happens due to our inattention. If the reason is in the device itself, now you know how to solve them using reliable and practice-tested methods.

It is unlikely that this article will not help someone, and if not a single method is really useful to you, then the roots of the problem are much deeper than you think, most likely you will have to install new firmware through the mode, but this is a separate topic for discussion. We hope you will never need articles on how to connect a Xiaomi smartphone to a computer, but if such a question arises, you can solve it thanks to our article.

If you look through the forums dedicated to Xiaomi devices, you can
There are a number of complaints that the computer does not see the phone. Working with information, transferring it from one device to another is an important part of life. modern man. If such a collapse has occurred with your smartphone, we will tell you what to do next. So, pay attention!

Why doesn't the PC want to see the smartphone?

There can be many reasons, and the point is not that these devices do not match in character! There may be problems with the drivers on one of the gadgets. It is worth reinstalling them and perhaps the connection problem will disappear.

The problem may be with the data cable you are using. To avoid problems with synchronization, you should use only the original USB cable. Even if you ordered high quality cable from a different company than the one that came with the device, malfunctions may occur frequently or periodically.

If the necessary drivers are not available on a laptop or PC, the phone may be charged from the PC, but not be identified as a storage medium. Downloading and installing these most unfortunate drivers can solve this problem.

If you have done all the mentioned manipulations, but the device does not connect to the computer automatically, you will have to do it yourself and manually. The item “USB connection to a computer”, located in the menu, has a subsection media device (MTP) - a check mark is placed on it. Next, click “attach USB as a drive,” if necessary. In the window that appears, the user clicks OK.

Connect Xiaomi Redmi Note 3 to computer You can follow the chain: “settings → advanced → for developers → USB debugging → enable.” Sometimes, due to the operation of the antivirus, the “for developers” column disappears; here you will have to work hard to solve the problem.

Restoring the smartphone to its original factory settings is the simplest and most obvious way to eliminate this defect. Information installed on the smartphone may be erased. Before restoring, you should copy to another medium, for example, microSD card all important information. So you save everything important files, programs, and the device will work smoothly again.

You should also be careful when downloading programs for your device, only from the official market. If the question is how to connect Xiaomi Redmi 3 to computer still torments you, download the Android Terminal Emulator application. On the Internet you can find a chain of simple actions, after which the smartphone and PC work together again, like good old friends. The main thing to remember is that no matter what problem you have, you can find tips and tricks; other users and experts will tell you what and how to do to solve any difficulties. If we talk about smartphone security, then its guarantor will be the use of high-quality protective accessories. The Redmi Note 3 case and film, original in compatibility with the device, will protect it from cracks, abrasions and chips, dents, and scratches.

The most common way to connect a Xiaomi smartphone to a computer is via USB. This function is used to transfer multimedia files, copy photos, and use the gadget as a flash drive. Xiaomi does not see the computer, xiaomi does not sync with the PC. Simply put, Xiaomi does not connect to a computer or laptop.

This can happen after updating your phone or changing xiaomi settings. How to make the PC appear in Xiaomi? The answer to this question is in the article.

Causes of problems

The main reason why the computer does not see the phone is not a problem with the computer, but the settings in the device. Along with this, the second most important are:

• "wrong" USB cable ( non-original cable or damage to the connector, wire);
• lack of drivers on the laptop to connect your phone model;
• system problems associated with a failure in the laptop or Xiaomi;
• incorrect choice of connection method (Xiaomi charges via USB, but cannot connect).

The Android application plays an important role here if the user has made an update. In new versions, Xiaomi does not see the computer due to data protection installed by the developers. But first things first. Let's move on to problem solving: what to do if the problem is a faulty cable.

The problem of connecting a gadget to a laptop is solved in the same way as on a personal computer.

Checking the usb cable

First, let’s determine whether the USB cable itself is working properly and whether there is any external damage on it. It happens that the connection connector to Xiaomi becomes clogged. In this case, you should carefully and carefully clean it with a needle, being careful not to damage the cables.

Another reason may be a defective cable that can only charge the device, but is not suitable for transferring files. In this case, there is only one way out: buy an original USB.

If the problem cannot be solved and the computer does not see Xiaomi, check that the PC connectors are working properly, just in case. You can select any other USB connector on the back or front panel of the computer. Sometimes a malfunction of the motherboard's south bridge can render everything inoperable. USB ports. There is only one way out - repair or replace motherboard computer.

The fourth reason why xiaomi does not see the computer may be a malfunction of the connector on the android. When water gets in or the smartphone falls, the gadget stops responding to connecting devices, and “glitches” begin.

In any case, you can try rebooting XIaomi. It also helps, according to user reviews, if you remove the battery from Xiaomi for a few minutes and hold it in your hands.

If you connect the gadget to the computer, and the “charging” mode is displayed on the display screen, you can transfer data between the laptop and Xiaomi. This is not due to a faulty cord, but to the smartphone settings.

So, when connecting Xiaomi to a computer, the following modes are possible:

• charger,
• MTP data transfer,
• camera mode.

If the computer does not see the Xiaomi phone via USB, but is charging, you need to go to the menu Xiaomi settings and in the window that appears, check the box opposite desired function: For example, MTP transfer.

Download drivers

When we connect Xiaomi to a computer, automatic processes are launched. During normal operation of PC programs, the following autorun menu appears:

Autostart of a Xiaomi smartphone does not work in some cases. In this case, the gadget will not appear on the laptop. To manually install drivers on the laptop, you will need to download 2 files. One of them presents a program for Media Tek, the second Qualcomm. However, you can delve into the drivers for MIUI yourself, since the choice on the Internet is wide, and determine which one is best suited for your Xiaomi.

Important! When installing files on Windows 8 and 10, you will need to disable driver digital signature verification and restart the computer.

For automatic installation drivers via the Internet you need to run the command:

Start - Control Panel - System and Security - System - Device Manager - Portable Devices. The following window should appear, in which we click on the icon of your smartphone. To identify problems, why the computer does not see Xiaomi, you will need to click on the context menu and select the Properties tab. Then check if the device is working properly. If not, then deleting the connection and then reinstalling it may help.

If the problem persists and Xiaomi does not see the computer, you should download drivers via the Internet. From two items in the Properties tab you will need to select automatic search drivers for the device. If you choose manual installation, you will need to specify the path to the folder where the downloaded files are located. In our case, Media Tek and Qualcom. They are usually located in the Downloads folder. They will help you establish a connection between Xiaomi and your PC. special applications. One of them: the MiPCSuite program. You can download it from the official website of the developer. By installing the program, the user gets the opportunity to synchronize the PC with Xiaomi: and use the function of transferring photos and files.

Enable debugging mode

Sometimes the gadget refuses to interact with the PC due to the fault of new developers Xiaomi versions, 5A, 4x, etc. In this case, the root of the problem why Xiaomi does not see the computer lies in the firmware settings. If Xiaomi does not see the computer after the update, but before that everything worked, to solve the problem of connecting a smartphone, you should delve into the phone’s settings and enable access to advanced connection settings.

In the “About Phone” tab, select “Developer Mode” by clicking on the MIUI menu about 7 times, after the entry “You are already a developer” appears, click on the “Developer Settings” menu, and in the window that appears, select “USB Debugging”. After enabling debugging and the results are positive, you can safely use your Xiaomi phone as a storage device.

Connect via terminal

To solve the problem of connecting your Xiaomi phone to a PC, you can use the terminal program by installing the program from Google Play. It's called Terminal Android Emulator.

After installation, connect your smartphone to your computer. Having opened the Terminal program, enter the word su in the line and press Enter. This enables super user mode. After, already in mode root access in the same window enter new line: setprop persist.sys.usb.config mass_storage,adb and click Enter. To apply the changes, you must reboot the program by entering the reboot command. This method suitable if you plan to launch your smartphone in flash drive mode. To synchronize Xiaomi with a PC in media file transfer mode, in the longest command, replace the word mass_storage with mtp, which is short for multimedia. If the computer does not see files on Xiaomi, but is displayed in camera mode? Read more about this.

In camera mode

If Xiaomi is connected only in camera mode, then for those who are afraid of “spoiling” Xiaomi, you can use the simplest method. Move files from laptop or PC to DCIM folder. And then from there, using the file manager, move it to the desired location on the phone. But it is much better to use the method described above.

Results

Basically, problems with connecting Xiaomi to a computer are not that big and can be easily fixed. If none of the above methods work, and the Xiaomi smartphone does not see the computer, there are two options left:

• reset all settings to factory settings. When using this function, it is important to remember that a reset will delete all user data: contacts, mail, etc.
• change the firmware.

In the latter case, it is important to figure out which one is best suited for a smartphone. Currently there are two most popular firmware versions:

• Stable firmware
• Global firmware 9.

How do you usually connect your phone to your computer?

Before I took the risk of officially updating the firmware over the air, everything was clearly according to the scheme:

After which the phone was displayed on the computer and you could go to it and transfer the necessary files.

Why doesn't the computer see the phone - connecting Xiaomi Redmi via USB?

However, after the update this stopped working - Xiaomi is no longer detected in Windows. The phone does not connect to the computer via USB, but only charges. How now to connect Xiaomi Redmi to a computer? Don’t rush to look for a driver - it’s not the driver at all, but the fact that new version firmware, in the interests of security, in order to protect the smartphone from playful inexperienced hands, a pre-installed blocking of Xiaomi USB connections was installed. To remove it, do the following.

That's it, now we proceed in the same way as before - connect the Xiaomi Redmi to the computer, click on “USB Charging” and select the MTP file transfer mode. Then go to Windows in “My Computer” and see the phone in the list of devices.

Click on it and get access to the folders internal memory and SD cards

I am sure that all Xioami owners this instruction will be mega-useful and questions about why the computer does not see the phone connected via USB will no longer arise.

Many users of smartphones of any brand often connect their gadget to a computer in order to transfer any files or install something on the phone. But in order to be able to do this, you need to know correct sequence connections and possible nuances, as well as sources of problems, in order to be ready to solve them as they arise.

How to connect Xiaomi to a computer: standard method

First, connect your phone to your computer via USB and check the simple functionality.

Instructions:

• Insert the cables into both connectors;
• Open the top curtain menu on your phone in the notifications tab;
• A line should appear there notifying you of the connection;

• Click on it and you will go to the connection settings;

• So, the connection may not happen if you have both options disabled as shown above. Activate the first field “Media device (MTP)” - this way you can transfer any data from your phone.

Use the second mode “Camera (PTP)” only when you need to transfer only photos to the PC. This way, the computer itself will open the folder with images, and you won’t have to search for long. But keep in mind that in this mode the phone does not see folders with other files.

The phone does not see the computer: checking from a PC

A similar check as described above can be carried out from a computer. Perhaps the computer did not recognize your smartphone and placed it in a folder with unidentified devices.

How to check it:

1. Go to the control panel on your PC;
2. Select the “Hardware and Sound” tab;
3. Next – “Devices and Printers”;
4. In the “Multimedia Devices” tab, find the name of your phone model, right-click the menu and click on “Troubleshooting”;
5. Next, the computer will detect the presence and absence of problems and offer solutions if necessary;
6. Ready!

On Windows 8/Windows 10, the names of these tabs will be slightly different.

Why Xiaomi does not connect to the computer: reasons

In those. support and service centers We often receive questions about the lack of connection between the phone and the computer. There are a certain number of reasons why the connection may not occur, and before asking for help from specialists, make sure that you have checked everything.

The computer doesn't see Xiaomi phone, because:

• You have a non-original USB cable. For example, you did not buy it in the brand store itself, or it may be defective.
• The cable is dirty and contains internal debris. Many people notice that, when dealing with a connection problem, they find a lot of small debris or dust in the cable or connector on the computer. Be sure to check your wires and clean them gently with toothpicks if necessary.

To avoid such situations, use special plugs for wires!

• The cable is broken/bent. When cables bend, the wires inside them come loose and they can no longer perform their intended function. In this situation, you will just need to purchase a new cable;
• The necessary drivers are not installed on the computers. Perhaps this is the first time you are connecting your phone to a computer, or it is possible that some kind of failure has occurred in the system.
• Using the wrong connection method or incorrect connection itself.

If you are convinced that everything is in order, try to follow further instructions one by one and skip steps only if you are 100% sure that you have done it before.

Connecting to a computer: installing drivers

Drivers- This software, which helps the computer understand how the connected gadget/device works and how to “communicate” with it.

All devices have their own drivers: phones, printers, scanners, etc.

It happens that even when you connect the phone for the first time, the drivers are installed themselves and subsequently updated when necessary. However, if this does not happen, you can complete the installation procedure yourself.

Attention! If you are the owner of a computer running Windows 8/Windows 10, disable the digital signature programs, i.e. protection against viruses, otherwise some processes will be inaccessible to you.

How to install drivers on a computer:

• Conduct a search of software sites on the Internet and select the most reliable ones (for example, w3bsit3-dns.com);

1. In the section with your smartphone model, find two archives: “MediaTek program” and “Qualcomm program” and download them;
2. Unzip these files in the usual way and place what you get on system disk(usually drive C) so as not to be lost or accidentally deleted;
3. Restart your computer (by yourself, if you haven’t received a notification about the need from the PC itself);

Now try to connect your phone. If it still doesn’t see the computer or you have already installed the drivers, we’ll try to update them.

Driver Update:

• Open “Device Manager” on your computer;
• Next, open “Portable devices”, where you can find the name of your phone;
• Click on the name of your model and open the menu by right-clicking;
• Select "Update Driver";

• If nothing has changed, move on.

Xiaomi does not see the computer: we debug via USB

A method that is often used to solve connection problems is USB debugging.

USB debugging mode or debugging mode- This is a kind of change in operating system for some specific purposes. Using this function, you can get root rights - user rights, and with them many new features.

Using USB debugging you can:

• Identify problems with the phone, which is what we need;
• Test the components of the device;
• Test the operation of any programs;
• Perform a backup copy of data;
• Receive more detailed data about the phone and all processes taking place in it;
• Restore the device.

As we can see, root rights allow you to do many interesting and useful things.

How to get user rights and perform USB debugging:

• Go to “Settings” and then go to “About smartphone” or “About device”;
• Find the field where it is written installed version MIUI and click on it up to 7 times;

• If you did everything correctly, a notification about obtaining root rights will appear;
• Now go to "Advanced" or "Advanced Settings" and "For Developers";

• There, find the “USB Debugging” field and activate it;

Additional ways to connect Xiaomi Redmi to a computer

There are a couple more ways to establish a connection between your phone and PC.

Method one: instructions:

• Go to the call menu;
• Enter the following combination in it: “*#*#13491#*#*”;
• After entering the last character, a dialog box should appear on the screen in which 2 options will be available - select the “MTP” connection method;

• As mentioned earlier, this mode allows you to transfer any files from your smartphone to your computer, which is why it is also called multimedia;
• Ready!

This method can be applied not only to Xiaomi smartphones, be it Xiaomi Redmi 4x, Redmi 5, 5 plus or Xiaomi Redmi Note 4, but also on any other Android device.

Method two: instructions

• For this method, you will need to install the “Android Terminal Emulator” application on your phone, which you can find in PlayMarket;

• After downloading, connect the gadget to your computer;
• Open the program, enter “su” and confirm your action;
• Next, enter “setprop persist.sys.usb.config mtp, adb” and press “Enter”;
• Type "Reboot", press "Enter" and wait for the phone to reboot;
• Ready! This procedure can also be carried out not only on Xiaomi devices.

How to transfer files via usb

The answer to the question “How to download photos from Xiaomi to a computer” is very simple. You will need to go to phone management, select the memory type: internal or SD card, go there and then perform the necessary operations with files.

Xiaomi: computer program or additional file transfer methods

In addition to applications on your phone, there is also Xiaomi program, which can be downloaded to your computer - Mi PC Suite. Its operation allows you to transfer PC large quantities files, see the smartphone screen on the computer without using a USB cable. Mi PC Suite functions as a file manager with great capabilities and advanced tools.

Benefits of Mi PC Suite:

• Synchronizing your computer with your phone is always successful;
• Can be done data backup or restore them;
• Possibility of firmware update;
• Access to external and internal phone memory;
• Connection via one network;
• Internet access via computer.

You can download the program on the official Xiaomi website. There will be no problems or malfunctions with this version, especially since it has now been completely translated into English language.

So, how to use the program:

1. Download it on PC;
2. Find the “.exe” file in the downloads and double-click on it;
3. Carry out the installation (on a PC);
4. After installation, click on the program logo and it will automatically connect to your phone.

Mi PC Suite sections:

• “Screenshot” – connection management;
• “Back Up Now” or “Manage Back Up” section backup copies data;
• “Update Now” - allows you to update the gadget without using “Settings”;
• “App” - install programs and applications on the phone;
• « File Explorer» - exchange files between two phones.