There are several providers providing satellite television services in our country. MTS recently entered a sought-after market niche. Due to attractive conditions for the purchase and installation of equipment, the company manages to connect new subscribers every day in the regions included in the satellite coverage area.

The equipment is offered by the operator itself, and can be purchased in specialized stores. New subscribers need to install a satellite dish with a converter, as well as connect and configure an MTS TV set-top box.

Before you worry about connecting to satellite TV from MTS, you need to make sure that your place of residence is within the coverage area of ​​the provider’s satellites. You can use a map where signal levels are indicated in different shades of red. For the appropriate level of coverage, you should select an antenna of a certain diameter according to the principle: low level (light red color on the map) - larger dish diameter.

Another important technical aspect to consider is choosing a satellite dish installation location so that the digital signal is not obstructed on its way to the receiving antenna. It also determines the direction in which the antenna must be rotated in order to directly “see” satellite signals.

As for the choice of equipment for satellite TV, in addition to an antenna of a suitable diameter with a converter, depending on the TV receiver, the subscriber needs to purchase the appropriate device.

1. CAM module- this option can only be used for some models modern TVs equipped with a DVB-S tuner.
2. Interactive console, operating in full range of options for viewing interactive television in the coverage area of ​​3G MTS signals.
3. Universal equipment - MTS satellite set-top box. This linear HD equipment is compatible with most televisions used by Russians.

Overview of applications for setting up a satellite dish

Satellite TV equipment adjusters use to correct installation antennas are a special device that costs a lot of money. If you have the ability and desire to install and configure the plate yourself, you can use:

• mobile application, which, using GPS and a camera, determines and indicates the direction to the satellite relative to the intended installation location;
• GPS program mode, which calculates the rotation angles of the plate and converter using a certain algorithm;
• setup wizard according to the map on the ru website.

For assistance in correct setting several satellite dishes have been created special applications. Some of them through official stores applications are distributed free of charge, some require a certain payment. The most commonly used GPS programs are:

• SatFinder, Satellite Director can be installed and used for free;

• Multifeed, Dishpointer Pro – paid mobile software.

DishPointer Pro v 2.2.2, Android

Each program has its own advantages and disadvantages, but they cope with the main task - helping in choosing the direction of the antenna to the satellite. Instructions for locating a satellite and turning the dish toward it may vary in detail.

MTS company on its official website in the “ Satellite television» offered the opportunity to carry out calculations of the necessary settings parameters according to the map. The subscriber is required to go to the “Settings” menu item and enter the location address. The system will display the calculated indicators and on the map the beam will show the direction to the satellite relative to the specified address.

Communication between antenna, receiver and TV receiver

The next step after installing the antenna is to communicate between the devices via cables. The cable coming from the satellite dish is connected to the antenna socket of the receiver. To connect the MTS set-top box to the TV, it is most often used HDMI cable: Most modern TVs are equipped with a corresponding input. If there is no HDMI output on the TV, then as an alternative, depending on the availability of connectors, you can use:

• TV SCART output and corresponding SCART-RC cable;

• RCA and RCA cable outputs (tulips);

• coaxial TV cable 75 Ohm.

For example, to connect the s2 3900 set-top box offered by MTS to a Samsung TV, you can use an HDMI or RCA cable. This set-top box is equipped with appropriate sockets. Which cable to use depends on the TV model.

If the subscriber has two TVs, and there is no technical possibility of installing an additional satellite dish, you can use the following communication options for TV receivers with one antenna:

• • by using a cable signal splitter (crab, splitter);

• by installing a converter with two outputs on a plate;
• through a multiswitch that transmits a signal to one or more receivers.

Important! All options assume a receiver for each TV.

In the first connection option you will need to purchase cable divider digital signal with one input and two outputs with a frequency bandwidth of 5-2400 mHz, as well as a connection method corresponding to the thickness of the cable: screw clamp, thread, coaxial socket, using soldering.

Advice! When selecting a splitter, you should pay attention to the signal attenuation rate: the lower it is, the better.

You should also take a responsible approach to determining the location of the tee, trying to minimize the distance from the place where the cable signal is divided to the TVs in order to avoid signal attenuation.

If you choose the second option, you need to purchase converter equipped with 2 outputs(there are more complex modifications with 4 and 8 outputs) and the required number of meters of cable. Installation with this method is more complicated: two cables are brought into the room from the antenna. This option is also more expensive, but eliminates the effect of signal attenuation.

In the third case, connections need to be purchased multiswitch This is a device that allows you to receive a signal from one or more satellites and transmit it to several independent TV set-top boxes. The method is relevant for large country houses and mini-hotels to connect more than 8 TVs.

Activating the set-top box and setting up channels

After physically connecting the satellite equipment to the TV, you need to complete the service activation process. It is assumed that the MTS smart or SIM card is inserted into the slot of the set-top box. Upon activation, the provider connects the contract of a specific subscriber with the ID number of his equipment, and the decryption key for encrypted channels is sent to the card. After activation, the set-top box decodes the specified package of channels provided for in the contract for a certain period of time, and subsequently controls the payment.

There are several activation options: through the dealer network (the equipment was purchased from a dealer), calling the MTS contact service, sending an SMS message from any operator number to 9909 indicating the card number and set-top box ID.

When you turn on activated satellite equipment for the first time, you need to configure the MTS TV set-top box. After turning on the set-top box, you should wait for some time until the system boots up and signals are received. Next, you need to turn on the TV and turn it to AV or HDM signal reception mode(depending on the cable connection between the receiver and receiver used).

The system will offer the "Initial Installation" menu. Here you need to select image parameters, menu language, and, if necessary, you can reconfigure other default settings. To search for channels, you need to use the remote control of the set-top box or the control buttons of the MTS set-top box without a remote control to move to the “Start search” menu item and initiate its execution (press the corresponding button on the remote control or panel of the set-top box). In the process of searching a list of found channels is generated. In the list generated by the system, the user can configure the channels so that they follow the sequence he needs. To do this, use the appropriate functionality of the TV set-top box (“Program Editor”) and the remote control.

In the “Settings” menu there is a “Basic settings” function, with which you can set the clock and time zones, as well as set the time to turn off the set-top box. There is also other functionality regarding choosing the type and sorting order of channels, and so on.

Installation, activation and configuration of satellite equipment is a labor-intensive task and requires certain knowledge and skills, if which are insufficient, it is better to resort to the help of specialists.

Is it possible to search in this receiver? manual mode other satellites, watch channels from other operators?

All MTS set-top boxes are programmed to work only with MTS channels. However, you can use a third-party set-top box by installing the MTS cam module into it.

I have an old set-top box that does not support the HEVC codec, can I change it to a new one?

MTS does not have an exchange program as such, you can purchase new receiver, which is now on sale at a discounted price.

I bought a new console. Is it possible to use a smart card left over from the previous MTS set-top box?

Yes, you can do that. To link a card to a new receiver and save the old one personal account contact contact center. But please note that if you previously had an interactive set-top box, you will not be able to do this, since interactive set-top boxes do not use smart cards, but SIM cards.

Is there a warranty for this equipment?

Yes, of course, all equipment comes with a warranty.

I ordered the equipment, but I'm afraid that they will bring me a set-top box old model without HEVC support.

Most likely, your fears are unfounded, since receivers that do not support this codec have been discontinued for quite some time. To dispel doubts, check with the seller for the model.

Which MTS receiver is better? What is the difference between different console models?

The models currently on sale are almost the same in operation. The only thing is that the Castpal set-top box requires very precise tuning to the satellite.

Currently I am using an old model MTS set-top box. The signal is excellent. I want to buy a new receiver. Do I need to change anything in the settings of the dish or converter?

It is possible that the rotation angles will need to be adjusted slightly. These settings may vary slightly for each console. But most likely, you won’t have to do this.

Which set-top box has a wi-fi function?

Not a single model has working wi-fi yet. satellite receivers MTS.

Are there special set-top boxes for connecting an additional TV?

MTS does not have such equipment. To connect a second TV, you can purchase any of the available receiver models.

When you turn on the MTS set-top box, it starts searching for channels every time, how can I disable this function?

Which model of MTS set-top box is suitable for watching UHD channels?

On this moment MTS does not have such set-top boxes. TV channels in UHD quality can be watched through the cam module (provided that the TV supports the UHD format).

How to update the software of the MTS set-top box?

If there is new software for the receiver, you will see a notification about this on the screen. Click "OK" and follow the prompts that appear.

Is it possible to connect this equipment to an old TV that does not have an HDMI connector?

In addition to the HDMI output, all MTS set-top boxes have tulip connectors. If the TV only has a “Comb” connector, then this will not be a problem - stores sell adapters from “tulips” to “comb”.

Is it possible to buy a separate remote control for these consoles?

Yes, you can contact your nearest service center. If this is not the case in your city, call technical support and they will tell you the nearest dealer who replaces remote controls. You can also purchase an analogue of the MTS remote control.

Cheap with current promotion. Everything you need is included. Receiver s9-3900.

Minuses

Installation is more difficult than the well-known three-color competitor. Expensive tariff offered by the operator. The receiver does not have a Pan&Scan mode. No way to watch free channels from the same satellite, only what the provider has provided.

Review

I specifically took set No. 190, since it offers the s9-3900 receiver - one of the two most modern for MTS. Yes, it takes longer to turn on (about 20-30 seconds from pressing the button to starting viewing), I read that there are a lot of glitches, although, to be honest, I haven’t encountered any problems yet. But on this receiver all the channels offered by MTS are available (except for UHD, although the signal may be weak), including Disney, without which I would not buy a satellite at all. The included package has a tariff and includes channels from three packages: basic, children's and adult. The contact center told me that I can change the tariff to just “basic” only by writing an application at the MTS salon. And considering that the “adult” package is simply ridiculous (someone really pays extra on general tariffs), you will have to take a walk and change the tariff. The installation is not very complicated - I calculated on the MTS website (in advance) which side the dish would be on, hung it outside the window, but then I needed the help of my family - I oriented along the line built by the application on my smartphone to the satellite, but got "0". Therefore, my family had to prompt me, and I turned and tilted the antenna. Tricolor ones are much easier to catch, I must say. I replaced the included converter with a multiport one, ran a second cable to the kitchen, installed a cheap receiver and got free channels in the kitchen :) A total of about 20 unique ones, about 40, taking into account the “hourly” and HD versions. It’s a pity, but there is no First, Russia and NTV for free, but there is TNT, Friday, 2x2, Zvezda, etc. So by paying extra you can get some kind of multiroom without an additional subscription fee.

The rapid development of digital technologies involves not only the use mobile communications, but also watching Internet television. MTS offers its subscribers several favorable tariffs with access to digital television. Cable TV from MTS is an interactive service with which regular tablet or a smartphone turns into a full-fledged TV with many interesting channels and programs.

Description of service and cost

MTS TV - the ability to broadcast over-the-air channels and high-definition TV using Internet traffic. Digital television has opened up a huge number of popular channels for MTS subscribers: news, sports, music, business, cinema, cartoons, etc. "Basic" tariff from mobile operator is the main and mandatory connection for connecting TV channels and additional options.

Digital and interactive television means access to a large number of functions: record a program, pause, repeat, rewind and much more. The features of cable TV from MTS include:

• Availability of HD channels - the ability to transmit sound effects and images High Quality;
• Several tariff plans - the ability to choose the optimal package of services without overpaying for unnecessary options;
• Information services - ability to display additional information: weather, exchange rates, calendar, etc.;
• Video room - the opportunity to watch a whole collection of high-quality films, ranging from classics to new releases;
• Multi-language support - ability to select a language when watching TV channels;
• Interactivity - the ability to stop, repeat and view a program from the archive.

How to connect and configure cable TV from MTS?

To connect cable TV and the Internet, you must leave a request on the mobile operator’s website. To connect to digital television, you can call +7 495 636 0636 or contact the MTS office employees. When submitting an application, the subscriber will be required to provide a telephone number or residential address.

Cable TV service can be connected if two conditions are met:

1. Availability of the technical ability to connect digital television to the subscriber’s address;
2. Availability of connectivity fast internet using GPON assistive technology.

Within 72 hours after consideration of the application, specialists arrive at the specified address to install additional equipment necessary for cable TV. Before the start of work, the subscriber draws up an agreement for the use of the service with representatives of the MTS company.

When setting up cable television, subscribers can connect to one of two main TV tariffs:

• “Basic” - the ability to watch 21 channels for 129 rubles/month. Ten channels are broadcast in HD quality. If a subscriber simultaneously connects high-speed Internet from MTS 200 Mbit/s, watching cable TV at this tariff will be free;
• “Nothing extra” is a rating tariff that includes viewing 63 channels, 28 of which are broadcast in HD quality. When activating this package, subscribers pay 300 rubles/month.

Why does not it work

Sometimes your favorite MTS cable TV suddenly stops working. This occurs either due to hardware failure (especially after technical work on the website), expired subscription or breakdown on the line or server. The course of action in this case is as follows:

1. Try turning it off and then on subscriber equipment(router and decoder). The system will reboot and return to basic settings;
2. Check the account status for cable TV and Internet provided by MTS, find out whether funds have been deposited for the current period;
3. If this does not help, contact support by phone +7-495-636-0-636

How to top up your balance

The most common reason for television not working is the lack of funds in the account. You can top up your account for using the MTS TV cable television service through the MTS Money website in several ways:

1. directly through the MTS Money application (downloading it via Google Play or in the AppStore);
2. with help bank card from the website pay.mts.ru (by entering your personal account, card details and payment amount);
3. through MTS stores;
4. through salon terminals personal account;
5. at payment acceptance points;
6. pay the debt in installments on the website moskva.mts.ru.

Modern home digital TV in HD quality is a new milestone in cable television. If previously it was enough to run a cable into the house and connect it to the TV, now, with the increase in the size of TV screens, an image of this quality is not enough for a comfortable perception of the picture. To view channels in digital quality a special set-top box or TV module is used. Setting them up is not that difficult, especially since the equipment is usually set up by a cable TV specialist.

You can catch channels for free digital television DVB T2 using a regular terrestrial antenna. But, as a rule, there will not be many channels, and it is necessary to have direct visibility from the antenna to the TV tower. Therefore, it is better to connect digital cable TV, which will have many more channels, and no antenna is needed, even if you pay a small amount for it subscription fee. Let's look at ways to connect home TV from MTS.

How to connect

To plug home MTS TV made easy: call toll free number 8-800-250-00-50, give your address and make sure that connection is possible in your home. Next, leave a request for connection, and within a few days a specialist will contact you to clarify the connection date. We advise you to use the information below to determine in advance the type of equipment you wish to use. You can rent equipment and pay a small monthly rent for it, or you can buy it back by paying a certain amount once.

Usually a specialist himself connects and configures the equipment, but if you have the fate of connecting yourself, then watch the following video. Various details and instructions are given below.

TV module

In order to use the CAM module, the TV must have a CI slot and a built-in DVB-C receiver. These components are already available in all modern TVs.

The advantages of this method of connecting digital TV are as follows:

• no need to use an additional IPTV set-top box, which will take up extra space;
• all channels will be present on the TV itself, and an extra remote control will not interfere with you;
• the device itself is cheaper.

But there is also a drawback: you will not be able to use such useful features IPTV as repeat, rewind and pause TV channels in real time, as well as “picture in picture”, video on demand, etc.

The procedure for connecting the CAM module of cable digital TV from MTS is as follows:

1. Turn off the TV;
2. Insert the CAM module into the CI connector.
3. We insert the Smart card into the module so that the card chip is on the side of the sticker on the module.
4. Turn on the TV

Setting up a CAM module consists of the following steps:

1. We set the correct time and time zone in the TV settings, and also, if there is a “Countries” section, select Russia or one of the countries of Western Europe (England, France, Germany and others).
2. In the mode of receiving a digital TV signal, we search for channels with the parameters indicated in the table below.

The MTS TV setup process is completed. When updating the channel package, you must search again.

HD set-top box

Connecting cable TV from MTS using a set-top box must be selected in 2 cases:

1. If your TV does not have a CI slot or a DVB-C receiver.
2. If you need IPTV functions pause, rewind, etc.

When choosing a set-top box, pay attention to the following: if your TV does not have an HDMI connector, then you need an SD set-top box connected to the TV using a tulip-type RCA cable. With such a decoder, you will only be able to use IPTV functions; watching programs and movies in HD quality will not be available. If your TV is equipped with such a port, then you will be able to enjoy watching HDTV high-definition programs.

It is also worth noting that when choosing of this type control will be carried out by the remote control from the set-top box. To connect the decoder, first insert the TV cable from MTS into it.

We turn on our TV and use the remote control to select the HDMI or AV signal source. When you turn it on for the first time, the decoder will immediately offer to search for channels, we agree. As you can see, setting up the decoder is very simple. We will look at the functionality of various IPTV set-top boxes in more detail in other articles.

Thus, setting up home TV from MTS is not difficult. If you have a modern TV, you can use a special CAM module. If the TV is a little old, or you want convenient IPTV functions, then you can use a set-top box that will allow you to rewind the broadcast, pause it, and many other convenient things.