Kaspersky Rescue Disk 10 - free boot disk Kaspersky Lab to scan and treat a computer infected with viruses. System infection can be so serious that using conventional antiviruses running on a “sick” operating system does not produce any result.

It is no secret that when actively working on a computer, when accessing the Internet, the operating system is exposed to potential danger. Attackers have come up with many various types viruses that can get onto your computer in various ways.

An antivirus installed on your computer will not always save you from the danger of infection. This is objective: threats appear first, and only then is counteraction to new threats developed.

In severe cases, the computer may not function normally. Therefore, you cannot use antivirus solutions that run directly on the Windows operating system.

If Windows does not boot, or the system is paralyzed, the antivirus installed on the computer, or an antivirus scanner downloaded from the Internet, will not be able to do the job of detecting and neutralizing malicious software.

IN similar cases Kaspersky Rescue Disk 10 will come to the rescue - a special version of Kaspersky Anti-Virus, booting from removable media, running operating system Linux. Malicious software located on a hard drive with the Windows operating system installed will not be able to use the computer during launch Linux, and therefore will not prevent system recovery.

Kaspersky Rescue Disk 10: rescue disk functionality

Kaspersky Rescue Disk 10 is a boot disk for scanning and disinfecting your computer in situations where it is impossible to use other antivirus applications on the computer. The rescue disk from Kaspersky will help the user boot the computer from the emergency recovery disk to perform the necessary work to treat the computer and restore the system.

Key features of Kaspersky Rescue Disk 10:

• loading from a CD/DVD drive or from an external USB drive;
• use of graphic or text operating modes;
• examination system disk computer or individual important areas (autostart, boot sectors) for the presence of malicious applications;
• treating a computer for a virus infection;
• performing system restoration work;
• making changes to the Windows registry;
• saving reports on the operation of the rescue disk.

Kaspersky Rescue Disk 10 is distributed as ISO image a disc that needs to be burned to CD or DVD disc, or create a bootable USB flash drive. Download Kaspersky Rescue Disk 10 from the official Kaspersky Lab website.

download Kaspersky Rescue Disk 10

Kaspersky rescue disk works in 32 and 64 bit operating systems Windows systems(Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP, Windows Server 2003, Windows Server 2008, Windows Server 2012).

After downloading to your computer, burn the ISO image of Kaspersky Rescue Disk 10 to an optical CD/DVD disk or USB flash drive on an uninfected computer.

How to burn Kaspersky Rescue Disk 10 to CD/DVD

To burn to a CD or DVD, you can use an optical burning program. laser discs. For example, you can use free program ImgBurn, according to this .

To burn a disc, use the minimum recording speed. Select the option to check the disc for errors after burning to a CD or DVD is complete.

Now, the user has the opportunity to boot from Kaspersky Rescue Disk 10 inserted into the computer's disk drive.

How to burn Kaspersky Rescue Disk 10 to a USB flash drive

Kaspersky Rescue Disk can be written to an external USB drive to load the antivirus from a flash drive.

You can use the program to create bootable flash drive(there are many articles about similar programs on my website), or a special free utility, developed by Kaspersky Lab.

Let's look at creating a bootable USB flash drive for Kaspersky Rescue Disk 10 in Kaspersky USB Rescue Disk Maker:

1. First, you need to create a folder with any name in a convenient place on your computer, into which you need to unpack the archive with the Kaspersky USB Rescue Disk Maker program using an archiver, for example, WinRAR or 7-Zip.
2. Insert the flash drive into the USB connector of the computer. The USB flash drive must be formatted in the FAT32 or FAT16 file system and have at least 512 MB of memory capacity.
3. Launch Kaspersky USB Rescue Disk Maker by clicking on the application file “rescue2usb”.
4. Using the "Browse" button, add in the "Path to Kaspersky Rescue Disk image (.iso)" field the path to the Kaspersky Rescue Disk image file in ISO format.
5. Select the USB drive, and then click on the “Start” button.

After the process is completed, a window will open announcing that Kaspersky Rescue Disk 10 has been successfully recorded.

The bootable USB flash drive with Kaspersky Rescue Disk 10 is ready for use.

Downloading Kaspersky Rescue Disk 10 on your computer

When booting from a rescue disk, immediately after turning on the computer, enter the Boot Menu or BIOS (UEFI) to select whether to boot the computer from a USB drive or from a CD/DVD drive.

Immediately after opening the Kaspersky Rescue Disk 10 window, press any keyboard key to continue using the Disk, otherwise, after a few seconds, loading will begin from hard drive computer.

Using the keyboard arrows “” and “↓”, select the Russian interface language, and then press the “Enter” key.

In the window with the license agreement, click on the “1” key to accept the terms of the agreement.

In the next window, press the “Enter” key to load Kaspersky Rescue Disk in graphical mode (this option is selected by default). In text mode, Kaspersky Rescue Disk will work in the Midnight Commander console file manager.

Immediately after launching, Kaspersky Rescue Disk will offer to update the anti-virus databases. In the application window, go to the “Update” tab, click on the “Update” button.

The protection status in Kaspersky Rescue Disk 10 is characterized by changing the color of the icon:

• Green color - indicates that the scan was completed, no malware was detected, and those detected were neutralized.
• Yellow color - warns that the level of protection is reduced, for example, the anti-virus databases are out of date.
• Red color - indicates that dangerous objects have been detected that need to be neutralized.

Checking and disinfecting your computer in Kaspersky Rescue Disk 10

In the “Object Scan” tab, select areas to scan for viruses, Trojans, worms and other threats.

By default, critical areas scanning is activated: boot sectors And hidden objects autostart. Additionally, you can enable scanning of other drives (drive “C:”, etc.).

Click on the “Run object scan” button.

Checking for viruses will take quite a long time.

After the scan is completed, the program will ask what needs to be done with the identified objects. Three options are offered:

• Treat - treatment of an object from infection.
• Quarantine - placing an object in a special isolated area. In the future, if the object is not dangerous, it can be returned from quarantine.
• Delete - removes the infected object from the computer if treatment is impossible.

The antivirus application will generate a report on the work done.

Utilities included in Kaspersky Rescue Disk 10

The rescue disk includes the Kaspersky Registry Editor, which can be used to make changes to the registry of the Windows operating system.

Dolphin File Manager - file manager, which is used to access folders and files of the operating system installed on the computer. With it, you can copy the necessary files from your computer to external drive for saving in case it is impossible to restore the Windows operating system.

The secure Konqueror web browser is used to access the Internet.

The rescue disk includes some other applications.

To exit Kaspersky Rescue Disk 10, click on the “Application launch menu” icon, select “Shut down” (or “Restart”), and in the warning window agree to shut down the computer.

Conclusions of the article

Kaspersky Rescue Disk 10 is an emergency disk for checking and treating your computer in case of a serious infection. If you cannot use other antivirus programs, a bootable antivirus disk will help neutralize malicious software on your computer.

Hello, I am glad to welcome you to our blog. computer help. Today we’ll talk about the useful anti-virus utility kaspersky rescue disk or how to create a bootable flash drive with Kaspersky anti-virus.

Launching a virtual shell

If you do not want to restart your computer, you can use the WinSetupFromUSB program. It has the ability to run virtual machine and see how our bootable flash drive will work.

Unpack the program and run the file , then select our usb drive, check the box next to Test In Qemu and click GO.

The green screen shell starts, please press any button to launch the menu, otherwise the computer will boot from the hard drive. Since we booted from a shell, this step is not important to us.

We accept the terms of the agreement - press unit<1>.

Select the desired action, for example Graphics mode.

In my shell, where I launched the program, there is no way to show you the Kaspersky desktop, but if you boot from a flash drive on your computer, you will see a green desktop shell.

Now let's watch a step-by-step video tutorial on creating a bootable USB drive with a utility from Kaspersky.

How to create a bootable USB flash drive with Kaspersky rescue disk | website

Results

After reading this material, each of you now knows how to create a bootable USB flash drive with Kaspersky rescue disk. Try, create and use.

You may have questions related to creating bootable usb. You can ask them below in the comments to this article, and also use the form with me.

Thank you for reading me on

When your computer is infected with viruses to such an extent that the operating system no longer even starts, there is only one way out - SCAN IT WHEN LOADING.

That is, we need to scan it, even before the operating system boots, to find all malicious programs and remove them. Then reboot our PC and again enjoy its working condition.

The fact is that when I first encountered a problem when the computer was infected with a virus and the operating system refused to start, I was simply horrified. Usually, if there is a virus on your computer, you simply find it using an antivirus program and remove it. And then the system did not boot at all. Simply, after turning on the computer, a window appeared asking how to send an SMS as usual, enter a code, and so on. In short another DIVORCE FOR MONEY!

What did I decide to do right away? I immediately came to the conclusion that it was necessary. I did this and was horrified when the virus again prevented the system from starting. How so? What to do if REINSTALLING THE SYSTEM DID NOT HELP?

Salvation can be scanning your computer for viruses when loading it! It’s great that I remembered about this, but I had never used it before.

We need to burn an image of an antivirus program to a disk or flash drive. Such images can be found on the official websites of antivirus developers such as Kaspersky, Doctor Web, and so on.

In this lesson I will tell you how to take an image of Kaspersky antivirus, write it to a USB flash drive and scan all disks on your computer, removing all viruses.

So now we'll start creating Bootable USB flash drive with antivirus.

For this we need:

1. Formatted USB flash drive.

2. Image of Kaspersky antivirus

3. A program for writing an image to a flash drive.

I hope you already have a flash drive, all you have to do is download the necessary programs.

First, let's look at the program. Double-click on the downloaded file with the left mouse button.

Then in the window that opens, specify the folder to unpack the program, or leave it as default, then it will be unpacked in the same place where it is. Click the "Install" button

After unpacking, the program will automatically start. Click the “Browse” button.

We indicate on the computer where the Kaspersky ISO image is located.

After the path to the image is specified, you need select USB drive, onto which Kaspersky anti-virus will be recorded, and click the “Start” button.

Our flash drive must be formatted for file system FAT or FAT32. Therefore, if we previously formatted it in NTFS, a window will appear where we must confirm formatting in FAT32. Click “Yes”.

The recording has started. We are waiting for completion.

After the bootable USB flash drive with the antivirus is created, a window with the text will appear: Kaspersky Rescue Disk was successfully written. Click "OK".

Now we need to prepare the computer for booting fromUSB storage device. You need to go into the BIOS and set it to boot from a flash drive. I'll show you using my BIOS as an example. It may be different for you, but the process will be similar, anyway!

We reboot the computer, do not remove the flash drive with the recorded antivirus from the computer.

When rebooting the PC, we need to go into the BIOS; to do this, press the DELETE or F2 key on the keyboard; it depends on your motherboard.

After entering the BIOS, find the Boot tab, select the item Hard Disk Drivers.

We put USB first.

We save the settings made using the F10 key and exit.

Now our computer boots from a flash drive.

If we did everything correctly, then Kaspersky will launch in a few seconds. Here we are asked to press the “Enter” key. Let's press.

Then, using the arrows on the keyboard, select the language “Russian”.

Accept the terms of the license agreement by pressing the 1 key.

When the virus situation on your computer gets out of control and conventional antivirus programs can’t cope (or they simply don’t exist), a flash drive with Kaspersky Rescue Disk 10 (KRD) can help.

This program effectively disinfects an infected computer, allows you to update databases, roll back updates and view statistics. But first you need to correctly write it to a flash drive. Let's look at this whole process step by step.

Why a flash drive? To use it, you don’t need a disk drive, which many don’t already have. modern devices(laptops, tablets), and it is resistant to repeated overwriting. Besides, removable media information is much less susceptible to damage.

In addition to the program itself in ISO format, you will need a utility to record to the media. It is better to use Kaspersky USB Rescue Disk Maker, which is designed specifically to work with this rescue tool. Everything can be downloaded from the official website of Kaspersky Lab.

By the way, using other recording utilities does not always lead to a positive result.

Step 1: Preparing the Flash Drive

This step involves formatting the drive and specifying the FAT32 file system. If the drive will be used to store files, then you need to leave at least 256 MB for KRD. To do this, do this:

The first stage of recording is completed.

Step 2: Write the image to a USB flash drive

Now you need to configure the BIOS correctly.

Step 3: BIOS Setup

All that remains is to tell the BIOS that you need to load the flash drive first. To do this, do this:

This sequence of actions is shown using the AMI BIOS as an example. In other versions everything is basically the same. You can read more about setting up the BIOS in our instructions on this topic.

Step 4: Initial launch of KRD

All that remains is to prepare the program for work.

Having a kind of “ambulance” on a flash drive will never be superfluous, but to avoid emergencies, be sure to use antivirus program with updated databases.

Learn more about protecting removable media from malware read our article.

How to write Kaspersky Rescue Disk to a flash drive - a special scanning and healing program for x64 and x86 PCs.

Using Kaspersky Rescue Disk you can restore your system after severe infections.

It is intended for complex cases of infection (Rescue - emergency, English), - when the computer is infected so much that it cannot boot on its own. Thanks to its use, applications infected with viruses do not receive control from the operating system. Due to this, the effectiveness of treatment increases many times over. The emergency “revival” mode gives access to checking service objects, database updates, rolling back completed updates, and viewing statistical tables.

When researching objects, the following are available:

• Convert security levels;
• Generate lists of objects to be checked, select them by type;
• Choose verification methods and respond to threats.

Selecting a flash drive

The created disc will be burned successfully if the flash drive meets the following requirements:

• Presence of preliminary low-level formatting;
• Free memory capacity from 256 MB;
• The recording system used is FAT (16 or 32).

If the flash drive has an NTFS file system, correct the format to the above.

IMPORTANT. If the bootable USB flash drive additionally contains an image of another OS, Kaspersky Rescue Disk 10 will not load correctly or run with errors. This type of storage device cannot be used.

Download the image file and Recording Wizard

First, download a program to manage disc recording. Unpack the archive:

We launch the package with the executable file :

The choice of your directory for unpacking (for example, “Desktop”) is indicated by clicking “Browse”. Otherwise, the directory will be selected as the “default”. In the disk creation wizard window that appears, click the “Browse” button and specify the route to the downloaded Kaspersky Rescue Disk 10 image file:

Unpacking the archive will begin by clicking the “Install” button.

Burning the Rescue Disk to a USB flash drive

At the end of the installer, the Disk Maker window will open again. In it you need to specify the route of the downloaded Kaspersky Rescue Disk 10 image file using the “Browse” button. Select the device you are looking for. You can record - activate the start of recording with the “START” button:

Click “OK” on the successful completion notification:

Preparing your computer

Now you need to change the boot in the computer BIOS. As a rule, they use the “Delete” or “F2” keys for this, but there may be others, as well as a combination of several - depending on motherboards. In principle, the method for accessing the BIOS menu is displayed at the beginning of the boot cycle. In the BIOS parameters from a removable disk (“Removable Device”) - on the “Boot” tab.

Because sometimes after Windows boot As a result of infection, the keyboard may not work; you need to make sure that USB support for the keyboard and mouse is activated in the settings.

By connecting the recorded Rescue Disk to the computer, you can reboot it and start checking.

Checking functionality

After restarting the PC, you will be prompted to press any key to continue - click. The computer will boot in accordance with the changed BIOS parameters - from a removable disk that has already been created and connected. Use the cursor keys to select the language of communication (for example, Russian). After reading License Agreement To agree, press one.

• Graphics mode is the standard interface;
• Text mode - selected by the user for a laptop without a mouse.

Press the Enter key and the system boots. After the disk has finished loading, you need to check for the update antivirus databases and you can run a virus scan.

After reading this publication, everyone now knows how to burn a Kaspersky Rescue disk to a flash drive and how to use it.

Leave comments and share your experience.