What SIM card do you need for iPhone? How to remove a SIM card from an iPhone? How to open iPhone 5 to insert SIM card

Finally, the treasured white box with the long-awaited iPhone 6 is in your hands. All that's left to do is set it up and use it for your own pleasure. It is clear that first of all you need to insert a SIM card.

What card is in the “sixes”?

You ask, “What kind of SIM card should be in the iPhone 6?” In the "sixes", as well as in their predecessor - the iPhone 5 series, instead of a regular card, they use nano-sim, developed by Apple support, and launched in 2012. They differ, first of all, in size - nano is much more compact and thinner than the standard one. It has parameters of 12.3 × 8.8 × 0.67 mm. In all other respects, the principles of their operation are identical, there are simply no plastic rims around the metal carrier with the chip, and the security parameters are slightly improved.

It is best, of course, to insert the original nano-SIM into the iPhone; it looks like this.

Trimming

The cost of replacing a standard SIM card with a nano, in the same MTS, for example, costs a lot - 24,300 rubles.

Therefore, many people prefer to cut it to the desired format themselves. This will take literally a few minutes, and does not require any special skills or equipment - the entire procedure is performed with ordinary kitchen scissors.

This is what “modifications” look like, which you can do on your own - just trim the edges. For “sixes” the one on the far right is suitable.

Many service companies offer to quickly and efficiently “adjust the nano-size” to the sixth iPhone for little money.

If you decide to cut it yourself, do not forget to first mark the characteristic beveled corner - you can put a dot on the reverse plastic side with a marker. We also recommend making something like a pattern - for the nano-sim parameters indicated above. This will make cutting it out much easier and less likely to make a mistake.

But here is an original solution from K. Ropp, which helps to quickly cope with the task.

Simply select the desired size and make markings along the intersection lines. The fit is almost perfect this way. And the likelihood of damaging important elements of the chip is minimized.

It’s better to cut with a small allowance, and then comb sandpaper everything is superfluous. Even if you go a little onto the metal surface, it’s okay. Usually the chip is placed in the center and will not be damaged.

After trimming and grinding the ends, remove a little thickness from the reverse plastic socket, since the factory SIM card, and therefore the slot for it in the iPhone, is 0.09 mm thinner - that’s what needs to be removed. If you do not do this, you will then not be able to open the port and remove the stuck card. We recommend inserting it into the tray from time to time and adjusting it so that it does not protrude above its metal side, and it can then be pulled out. After that, thoroughly wipe it from dust and that’s it - the nano-sim can be used.

How to install it?

So, the card is ready - all that remains is to install it. Schematically, you can remove the nano-socket like this.

In order to open the receiving tray you will need a special needle included in the kit.

With its help, you can safely remove the tray from the iPhone into which you need to insert a SIM card. However, many do not find it in the package, but it is there, it’s just not immediately visible.

All you need to do is take out the instructions and pull them out of the paper holder in the center.

So, in order to open the nano-card tray, you need to insert a pin into the hole located on the side, on the right side of the iPhone display, and press firmly.

After a slight click, the outer plug will move slightly away from the body and can be easily removed.

If the original iPhone needle is lost, the same thing can be done using a regular paperclip (needles with sharp edges cannot be used).

Recommendations

Regarding the SIM card, there are several important points.

2.If you plan to trim an existing one yourself, follow the manipulations we described. It must “sit” tightly in the tray, otherwise, at a minimum, you will have problems with communication, and in the worst case, the port will be damaged.

3. Very carefully go around the places with metal contacts, do not forget to “scrape off” the excess thickness only on the side where the plastic is. Walking on metal will probably ruin your SIM card.

4. Please be aware that older cards may no longer work after being trimmed.

As you know, Apple did not deign to include instructions for the iPhone 6 and therefore new users of Apple products may find it difficult to understand their new device. In this material we will tell you how to use iPhone 6 and you will learn about the philosophy of building iOS - the operating system for the iPhone and iPad.

So, you bought yourself a new iPhone, came home and started unpacking it. Here it is, the original iPhone 6, we turn it on and see the greeting. You can’t get into the OS without a SIM card, so let’s insert it.

Insert the SIM card

For iPhone 6 you need a nano-SIM, which is this moment is the smallest card for devices. It is not surprising, since the company strives to use the most technologically advanced solutions in its products.

In order to open the compartment where you need to insert a nano SIM, you will need a special metal “stick”, which comes with the device and looks like shown in the picture on the right. All you need to do is push it absolutely straight into the special slot for it and press down. You will need to press quite hard - Apple does everything well. You just need to press at a right angle, and not pick at it, as some people think. After some effort, the cell will open and you can pull it out completely with your fingers.

What to do if you have a regular SIM card? The ideal solution would be to go to your operator's service center, where they will kindly change your SIM card to the one needed for the iPhone 6, i.e. on nano-SIM.

If you have no desire to go somewhere or change something, you can cut your card to the required size. This is done easily and naturally, and we wrote about it in detail.

Moreover, if you are unable to cut your SIM card as needed, then you can already go to the operator.

Getting started and interacting with the OS

By inserting the card, your phone is activated and from that moment the warranty on your device comes into force. For the device to work, you will need to create an Apple ID if you don’t already have one and execute standard settings language, time, synchronization, etc.

So, your brand new iPhone 6 has turned on and you see in front of you operating system devices. The OS is very concise and does not have any unnecessary options and capabilities. Unlike Android, IOS does not have desktops, widgets, or anything like that. Your HOME SCREEN is a list of your applications. As in Android, applications will move to new pages as their number increases, and you can group them into folders.

The philosophy of the system itself is completely aimed at the consumer, providing him with a minimum of settings and maximum application functionality. The iPhone 6 really has very few settings compared to Android devices.

Applications on the iPhone 6 are practically the same as those on other operating systems, only of a higher quality, which is required by strict moderation of applications in the AppStore. In this way, Apple improves the overall enjoyment and experience of using the device.

Installing applications from the AppStore

In order to successfully install applications from the AppStore, you will need to enter your card details and also agree to additional rules. The store has both paid and free applications.

In order to install applications on iPhone 6, you do not need to enter a password every time. You can enable consent to install the application using fingerprint confirmation, which is much more convenient and faster. All you need to do is set up Touch ID.

In order to get the opportunity delete application or move application to folder on iPhone 6, just hold your finger on the icon.

List of recently launched applications

The iPhone 6 features multitasking. This indicates that you are pressing the HOME key to minimize the current application. To open a list of minimized or recently running applications- quickly press the HOME key twice.

How to close applications?

First, press the HOME key to minimize the application, then open the list of all running applications by quickly pressing the HOME key twice. You will see screenshots of applications with icons below them. To turn off the application completely, slide the screenshot up with your finger.

How to pull the top of the screen to the bottom?

Those who watched iPhone presentation 6, remember that they showed the ability to quickly pull down all top part screen. This is necessary in order to be able to use it comfortably with one hand (it is difficult to reach the top of the screen with one hand if the application requires it). To quickly pull the entire top of the screen to your fingers, simply double-tap (NOT PRESS!) the HOME key.

How to transfer music, photos and videos to iPhone 6?

In order to be able to copy your music, pictures, videos and films to your iPhone, you need to install it on computer iTunes, which should be downloaded from the official Apple website. In the program, log in using your Apple ID, connect your iPhone and see everything you can send to it.

How to backup apps and files on iPhone 6?

If you want to copy data from your iPhone 6, then iTunes is suitable for this purpose. However, it is not as functional as we would like, so we recommend using the iTools program (It requires iTunes installed).

Taking pictures with headphones

On iPhone 6, you can connect headphones and take photos by pressing the volume keys. The volume key in this case works as a cable release, allowing you to take photographs more or less remotely from the device.

This may be required if you need not to move the camera (there are still micro movements in your hands) or if you want to easily take selfies with the main camera.

Taking screenshots

Sometimes we need to take a screenshot of the screen and to the surprise of many, this opportunity implemented at the native device level. In order to take a screenshot you need to simultaneously press the key Home and a key blocking.

We hope the material helped you understand a little iPhone capabilities 6. Then you are on your own. All the best! If you have any questions, write in the comments.

An iPhone is, first of all, a phone with which users make calls, send SMS messages, work with social networks through mobile internet. If you purchased new iPhone, the first thing you need to do is insert a SIM card.

You probably know that SIM cards have different formats. Just a few years ago, the most popular option was a standard (or mini) size SIM card. But in order to reduce the area that it will be placed in the iPhone, the format has been reduced over time, and today the current iPhone models support the nano size.

The standard-SIM format was supported by devices such as the first generation iPhone, 3G and 3GS. The popular iPhone 4 and 4S models are now equipped with micro-SIM slots. And finally, starting with the 5th generation iPhone, Apple finally switched to the smallest version - nano-SIM.

Insert the SIM card into the iPhone

From the very beginning, regardless of the SIM format, Apple maintained the same principle of inserting a card into the device. That's why these instructions can be considered universal.

You will need:

A SIM card of a suitable format (if necessary, today any mobile operator replaces it immediately);
A special paper clip included with the phone (if it is missing, you can use a paper clip or a blunt needle);
Directly the iPhone itself.

If you did everything according to the instructions, but the phone still shows the message "No SIM card", check the following:

Correct installation of the card in the smartphone;
The performance of the SIM card (especially if you cut the plastic to the desired size yourself);
The functionality of the phone (a much less common situation is when the smartphone itself is faulty - in this case, no matter what card you insert into it, the operator will not be detected).

Inserting a SIM card into an iPhone is not difficult - see for yourself. If you have any difficulties, ask your questions in the comments.

None will work without a SIM card mobile phone. Or rather, it will work, but it will not perform its main function. Given the variety of SIM card slots and formats, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated about this, but some points require clarification.

Note that modern smartphones(especially iPhones) are undemanding to this process. For example, old Nokia phones in this regard were incredibly difficult. I had to worry a lot and look for a slot where to insert a SIM card. Everything in the iPhone is provided for the convenience of the user: there is no need to remove back cover, and the kit even comes with a special tool for removing the tray. However, the tray itself was not invented by Apple. The same Nokia company was the first to implement a removable tray. But this is a past story, and we will move directly to the question itself.

Types of SIM cards

First of all, please note that different iPhones use SIM cards of different sizes. The third generation of Apple phones worked with regular-sized SIM cards. Then came the fourth generation of phones that could only accept Micro Sim cards. Further, the fifth, sixth and seventh generations only work with Nano Sim cards.

All these cards differ from each other only in size: width, length, thickness. Therefore, when purchasing a starter pack, it is important to check with the seller so that he sells the card in the size you need. Some starter packages come with cards of all sizes at the same time: that is, there are special bending lines along which you can break out a card for your phone.

Will a regular SIM card fit into the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They just cut off the normal one large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone perfectly received the signal from the desired operator. Even today, a regular standard sized generic SIM card can be cut down to Nano or Micro SIM size and it will work.

But there is no such need now. Operators sell SIM cards of all sizes. And if you still have an old large SIM card, and you bought a phone where it does not fit, then in any salon mobile communications They will replace it with the size you need. In this case, you don’t need to know how to insert a SIM card into an iPhone. They can even do this in a store, and you just have to watch.

Installing a SIM card

So, how to insert a SIM card into an iPhone? In the box, the phone always comes with a paperclip (it is also called (iScrepka), with which the tray is opened. This paperclip can be noticed by something else: a pin, a needle, nail scissors, even a toothpick. But this can simply damage the tray. It is located with right side (on the side of the phone).

We take our paperclip, insert it into the hole of the tray (a very small hole), press down a little, after which the tray will come out a few millimeters. Then simply remove it completely with your hands.

When you have the tray in your hands, place the SIM card in it. It is important that it is placed with the chip facing down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert a card in any other way, some users manage to do it.

Now we insert the tray with the SIM card back into the slot and press it down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: it is not necessary to turn off your phone. Previously, you had to remove the battery and only then insert the SIM card, but now there is no such need.

Once the SIM card is inside, the phone will ask you to unlock it. It is normal that it is blocked by default. To do this, you will need to enter a PIN code. You must know this code (it is indicated on starter pack), but if this is your old card, then you already know it for sure.

We enter the PIN code, the lock is removed and the phone finds the desired network. If the network cannot be found, then in the settings there is an “Operator” item. There you can select the operator to whom the card belongs. The default option is “Automatic”, and in this position everything should work fine. But there are also exceptions. Therefore, just select your operator and the phone will immediately find the network. But if problems arise and you still don’t know how to insert a SIM card into the iPhone 5S, then move on to the next point.

If the SIM card is not detected

If, after performing the manipulations and even selecting an operator, the phone writes: “No network,” then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it's unpleasant, but there's nothing wrong with it. They learned how to remove a lock a long time ago, so special slots for iPhones are sold on radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip spacer for the SIM card, and a paper clip.

This article describes in as much detail as possible how to insert a SIM card into an iPhone 6, but these instructions are valid for all models.

To figure out how to insert a SIM card into an iPhone, you don’t need to have any serious skills. However, beginners who pick up an Apple smartphone for the first time will have to rack their brains a little. In this article I will tell you how to insert a SIM card into any iPhone.

Location of the SIM card slot iniPhone

In different iPhone models, the SIM card slot is located in completely different places. In the first versions of the smartphone (2g, 3g, 3gs), it is located at the top of the case near the Power button. In iPhone 4/4s and 5/5s, it moved to the right side panel of the smartphone, where there are no speaker volume buttons.

Location of the SIM card tray in iPhone 4/4S and 3/3GS

Finding the SIM card slot is very easy, to do this you just need to look a little closer at the surface iPhone cases and you will immediately see a small hole the size of a simple paper clip

Tray location in iPhone 5/5S

This hole is a lock that opens the SIM card tray if you press it with a special key (usually supplied in the box with the iPhone, any version). By the way, you can open the lock with a simple paperclip or other sharp object.

Tray location in iPhone6/6 Plus

Selecting the desired SIM card format for iPhone

By pressing the lock with a key or a paper clip, the SIM card tray will come out. Where will you need to insert your SIM card.

It is also important to have an idea of the size of SIM cards - the fact is that their usual size is not always suitable for devices Apple.

It is important to know which SIM card you need. The point is that in the old iPhone versions SIM cards of different formats were used.

For iPhone 2g/s and 3g/s you need a regular SIM card measuring 25 x 15 mm.
iPhone 4g/s already asks for a SIM card in Micro SIM format, the size of which is 15 X 12 mm.
iPhone 5/5s and 6/6 Plus and older already use the new Nano SIM format, the size of which is only 12.3 X 8.8 mm.

Some craftsmen manage to cut a regular SIM card to Micro size, but this is a very risky task and hardly everyone can do it. Therefore, I advise you to just go to the salon cellular communications your operator and change your old SIM card to the one you need.

How to insert a SIM card into an iPhone

After you have a SIM card required format, you can start installing it on your iPhone. To avoid mistakes and do everything right, make sure that you put the SIM card in the tray with the gold side down (while the iPhone itself should be face up).

Having secured the SIM card in the groove of the tray, carefully insert it back into place.

In order to make sure correct installation cards, turn on your smartphone (if you turned it off) and check the connection. Interesting feature iPhones are able to insert and remove a SIM card “hot”, without turning off the phone. To check whether you inserted the SIM card correctly, simply turn on the smartphone and make sure that the iPhone sees the SIM card. I would like to note that the iPhone allows you to remove and insert a SIM card while it is on.