Many users quite often encounter a situation when in the menus and windows 1c the font is too small. Some are trying to decide this problem by reducing the resolution of the entire screen, but this method has one undesirable effect, the font increases not only by 1s, but also throughout Windows system. This method is inconvenient, which is why we will consider with you a more correct solution to this situation.

Where to increase the font in 1c?

So, now we will increase the font in 1C to the size you need, it is worth noting that this method is only acceptable for 1C 8.2 databases that run in the launch mode of a regular 1C application. First, go to the configurator, on the left side of the object tree, click on “+” and expand the “General” branch, then we will be interested in the “Styles” object, open it and see the “Main” object, double-click on it and see the window which will open is shown below.

We are interested in 4 parameters here: “Text font”, “Small text font”, Normal text font”, “Large text font” and finally “Largest text font”. First, we try to change the “Text font”, to do this, click on the three dots , a window will open in front of us as shown below.

We set a specific value to increase the font by 1s

In order to increase font 1s We first need to uncheck the “From style” checkbox, after which the choice of font size will become available, select the one you need and click “OK”. Now we save our base and launch the enterprise. If the font has not changed, then try changing the font size to “Small text font”, “Regular text font” or “Large text font”. One of the options will definitely work.

The work of an accountant is quite hard, but even more responsible. You must not make mistakes, as huge troubles can follow if they are not detected and corrected in time. It is difficult to track many operations, especially to look for errors when the font in 1C is small. It is possible to strain your eyesight every time to look at something written in small letters, but this will definitely be followed by loss of vision. In this case, you will have to visit an ophthalmologist and fight to restore visual acuity.

Making individual edits to the program makes the work of an accountant easier.

However, you can do things a little differently by preventing visual strain. To do this, it is quite enough to simply increase the font size by 1C. If you have the most installed latest version 1C, you just need to change the system font size of your operating system. By performing these steps, you can increase the font until you feel comfortable working with the program.

You will have to act a little differently if you continue to work with the 1C program of the seventh version or earlier. To eliminate unsuccessful attempts that provoke unnecessary worries, it is useful to familiarize yourself with the recommendations of experienced users on how to increase the font in 1C.

So, if you decide to take steps that will make it possible to increase the size of letters, first pay attention to what version of the 1C program is installed on your computer. This is very important, since it will determine how to change the font size in 1C.

Performing actions in 1C 7.7

If the 1C program version 7.7 is installed on your computer, select the “Service” option on the main menu panel, then click on the “Options” line, and then go again by selecting the “Interface” tab. Only now you will see a window in which there will be a “Select font” button. If you click on it, a window will appear that is very similar to what the user encounters when working with office applications.

All that remains is to choose a font from the proposed options, its design style and, of course, size. Finally, do not forget to agree to the proposal to save the changed settings, each time clicking on the “Ok” button before closing the window.

Performing actions in 1C 8.2

If the 1C program version 8.2 is installed on the PC, the algorithm of actions will be slightly different. In addition to the fact that you can change the font, or, more precisely, increase it, by increasing the OS system font, as we have already indicated earlier, there is another option for user manipulation. We invite you to understand these manipulations and understand how to directly enlarge the font on the screen in 1C.

Initially, you should also go to the “Tools” menu, go to “Options”, then go to the second tab open window"Texts". At the bottom of the open window you will easily find the “Font” line; open options for built-in fonts and their sizes, choose the option that is preferable to you. As you can see, in this case no difficulties arise. By following the recommendations, you can achieve what you want without any problems.

Increasing size through the configurator

There is another method that is a little more complicated than those we have already considered. However, if you decide to try this algorithm of actions, you will succeed if you have the desire and maximum attention. First, launch the program, then find the “Configuration” item and follow it. After this, you will find the line “Open configuration”, click on it.

Now the database structure window will load, located on the right side of the main window. Find the “Styles” parameter, click on it, after which a sublist will open. Select the General option to edit it. Further, all actions will automatically become clear, since you will only have to select the desired font, its size and, if desired, other parameters that are important to you.

If the program is used by several users who prefer different letter sizes, it will be useful to do some more manipulations. Specifically, go to the "Operations" menu, follow "Information Registers", then select "User Styles". In the window that opens, register those users who need a large font size. Opposite the selected user, set 1 in the “Style Number” field.

In order for everything to work without failure later, it is important to make some more changes to the parameters. Initially click “Configuration”, then find “Support”, go to it, there you can find “Support Settings”. In the upper right part of the open window, find the “Enable editing ability” button, then in two blocks, confirm the choice of possible editing while maintaining support. After performing these actions, everything will change, you will be satisfied with the result achieved.

So, you can definitely enlarge the font in the 1C program yourself if you strictly follow the recommendations of experienced users. Try it, act more boldly, improve your skills in working with such software, change the settings to create comfortable conditions for yourself.

The work of an accountant is not easy, there is a lot of paperwork, constantly in front of the computer, how to save your eyesight and work comfortably? One of the main tools of an accountant is the 1C program, but the program interface is not always comfortable for the eyes and directly depends on the monitor, resolution, etc., but often it is not possible to change the monitor, and the need to increase the font is always present.

If in version 7.7 the font was increased through the SERVICE - PARAMETERS - INTERFACE menu, then in 8.2 such a tab no longer exists. 1C 8 uses themes and fonts installed by default in the system, so the easiest way to increase the 1C font is to increase the system font of the operating system. Let's look at the available methods for increasing the size of system fonts for different generations operating systems Windows.

Increasing the system font in Windows XP:

In fact, the gadgets for increasing the scale of applications appeared in subsequent versions of operating systems from Microsoft, but XP still has the ability to adjust font sizes without editing system files. The easiest way is to reduce the monitor resolution, but this is not our method, since solving one problem will result in a new one in the form of blur, which is even worse for the eyes. Click “Start” - “Control Panel” - “Display” - “Design” tab and at the bottom of the window there is the desired “Font Size” item, select the option that suits us and reboot to apply the settings correctly. Moreover, if you go to “Effects”, you can increase the size of the icons, which will be much more convenient and pleasant.

Increasing the system font in Windows 7:

Microsoft is following Apple's lead in making its systems friendlier (author's note) and is paying great attention to the visual and personal design of the desktop. Font settings are now available from the Screen menu. We go to “Start” - “Control Panel” - “Screen” and we are immediately offered the item “Ease of screen reading” where we use one of three options to scale the font, icons and everything connected with it. There is one caveat: on different graphics adapters in some applications, an increase in the system font may actually be displayed as “Scaling” with all the resulting artifacts and blurriness.

Increasing the system font in Windows 8/8.1:

Finally, the core of the system seems to have been “finished” and Microsoft has been busy working on the Visibility of its product. We quickly and easily set up a work area that is convenient for you.

Due to the lack of a Start button, you can get to the Screen settings menu in two ways:

1. Right-click in any free space desktop and select the “Screen Resolution” item; there, quite intuitively, drag the slider to the desired result.

2. Move the cursor to the right corner of the screen until the auxiliary panel appears, where in the search we write “Screen” and select the corresponding icon, then on a whim.

Increase system font in Windows 10:

Finally, Microsoft heard its slaves and crossed its new products with the old familiar and beloved workspace organization from Windows XP-7. Go to “Start” - “Settings” - “System” - “Display” and there on the right side of the window drag the slider to the desired result.

We have mastered the basic capabilities of increasing the font in 1C, but there are times when for some reason this is not applicable or not available, then...

Enlarging the font in 1C 8.2 using 1C itself

1 Method for Users. You can slightly improve the situation with fonts yourself directly in the CONFIGURATOR of platform 8.2 through the menu SERVICE - PARAMETERS - TEXTS.

Here the font will change directly in documents, but not in menus, etc. Having selected the font type and its size accordingly, you can consider “increasing the font by 1c with your own hands” done, but it’s difficult to call this a big victory.

2 Method for advanced users. The beauty of tabular 1C lies in its data organization structure, and more specifically, 1C itself is essentially a configuration, and the technology platform is just an interface for working with the database. Each table has connections with another table, the data has specified connections with other data, and mathematics works at the level of rules also specified in the configuration. According to this rule, the design is also included in the configuration itself and is therefore available for editing.

We warn you that the following steps may lead to problems if performed incorrectly! Be sure to do backup copy and be careful, if some actions are not clear, then it is better to stop and contact a specialist!

Open the configuration in the "Configurator" mode. Select "Configuration" and then "Open configuration", wait a little until the database structure appears on the right side of the window. Go down to the “Styles” item, open it and select “Main” for editing. Next, on the right side, we can completely personalize the 1C design for ourselves; we will not describe the process in detail, since further work is for experienced people who understand, but there are also a few warnings for hackers:

Changes are available in the configuration after the corresponding elements are removed from support, which will make the configuration non-standard and subsequent updates will need to be made taking into account the preservation of this data area. More details in "Updating a non-standard 1C configuration". The changes made will be applied to the entire configuration, which will affect all users during network operation.

If you have any questions or suggestions, we’ll add them to the article without any problems! The main thing is to be careful: you carry out all actions at your own peril and risk, you also bear responsibility for them!

The problem with how to increase the font in 1C is solved once and for all!

In this short article we will look only at the new and most convenient way to increase the font in a 1C configuration running on platform 8.3.10 and higher. Previously, in order to change the text font in the 1C program, users and specialists came up with various tricks to achieve the desired result: they reduced screen resolutions, edited styles in 1C. It's a thing of the past now - we'll look into it three simple steps, which will help you forget about this problem forever and change the font with one mouse button.

So, if you want to increase the font in the 1C program, follow these steps:

1. Update the platform to version 8.3.10.2168 and higher. Read about where to watch the latest releases and check which one you have.
2. Open any modern configuration developed in managed forms Oh(BP 3, ZUP 3, UNF, ERP). Read what configurations there are
3. Use the quick form scaling mechanism to increase or decrease the text font and image size.

How to use the fast form scaling mechanism to increase font size in 1C

We open any 1C database on managed forms in which we want to customize the font. In the upper corner of the program, click on the “Change scale” button, the scale settings dialog will open. When the dialog opens, the current scale value of the active form is displayed. Move the slider left or right to change the font, you can also use the cursor keys on the keyboard or PgUp/PgDown. You can configure both a specific form and all forms in the program, use the “Install for all” button. The settings will be saved and loaded during the next session, due to the fact that the scales are stored separately for each form in local storage on the user’s computer.

This rescaling feature is a platform mechanism, so if you are using any custom or even custom configuration, simply upgrade to 8.3.10 and your users will be able to change the font size to their liking directly in user mode.

The font size is adjustable from 50% to 400%. At the same time, the size of the elements and font is not simply reduced or increased, but the entire form is rebuilt to fit the new sizes of the elements.

Advantages:

• None additional settings and programming - the base remains standard
• You can change the font specifically for a specific user
• Font settings are saved

Restrictions:

• Using the platform 8.3.10. Haven't switched to 8.3.10? We will make the transition and update the platform at a low price
• Works only in "managed" forms
• This option is not available when using compact display mode. In other words, you can enlarge the font only when using normal mode display forms

If it doesn't suit you this method due to the use of the 1C 7.7 platform, as well as earlier versions of the 8.x platform, just read our detailed article in which we analyzed all the main ways to increase the font in the 1C program of any version.

The ability to enlarge the font in the program is far from the only innovation among other interesting and significant changes in the new platform! Follow our

Implemented in version 8.3.10.2168.

We have implemented a mechanism for quickly scaling forms. Mostly it is intended, of course, for users, but developers can also use it if necessary.

We believe that this mechanism will be convenient and useful in cases where you need to quickly and easily, or briefly and temporarily, increase or decrease the scale of application data displayed in the form.

You probably know that you can make the font larger by changing the screen resolution. And some time ago, we finalized the platform mechanisms so that application solutions were clearly and correctly displayed when . But changing DPI is a relatively complex and “fundamental” operation. Firstly, not all users have sufficient knowledge to perform it. And secondly, it affects all applications installed on the computer. If something needs to be increased or decreased only “here and now”, or if users are not sufficiently skilled, they will not change the DPI.

In such a situation, the mechanism for quickly scaling forms will come in handy. If the user does not have good eyesight, he can easily make himself “bigger”. And if your vision is good, but not the entire table fits the width of the form, you can make it “smaller.”

In client applications

To change the scale of managed forms and documents in client applications, you can use either the main menu or a command from the system commands area:

The scale setting dialog opens in the upper right corner, but you can move it to any location on the screen that is convenient for you:

The scale of the shape can be changed in the range from 50% to 400%. In this case, the size of the font and elements is not simply increased or decreased, but the entire form is rebuilt to fit the new sizes of the elements.

For example, you can increase it to 200%.

Or vice versa, reduce to 70%.

Rescaling is done on the client and does not require a server call.

Scaling only applies to form content. System bars, favorites dialog and history dialog do not scale. Also, frames and scrollbars inside the form do not scale. Changing the size of these elements can be achieved by changing the screen resolution (DPI).

By moving the slider, you change the scale for one shape. But if you want to apply this scale to all forms, then there is a button for this Install for everyone. The same button will help you return the scale of all forms to 100% at any time.

Although we have built in a fairly large range of scaling, we do not believe that all of it will necessarily be used. According to our estimates, users who want to use this feature will slightly reduce all forms, up to 90-95%, and some forms, on the contrary, will slightly increase them to 105-110%.

Maintaining scale

Scales are stored separately for each form in local storage on the user's computer. In addition, the general scale for all forms is stored there, which has a standard value of 100%. When you set a new scale for all shapes, the individual values ​​for each shape are removed.

Form scale in the configurator

In the configurator, you can also set the scale at which the form will be shown to the user. To do this, we implemented the form’s property Scale. We recommend using this property in cases in which you previously used OptionScale: Compact. You need to assume that in compact mode the scale of the form is approximately 80%.

Preview shapes to scale

While editing the form in the configurator, you can see how it will look at different scales. In the form editor, you can select a scale from several fixed values.

As a result, the shape displayed in the preview area will be enlarged, for example, to 150%.

Showing pictures

In order for enlarged forms to look good, it is necessary to have several versions of the same image, designed for different resolutions. Therefore, the mechanism for variant pictures, which already exists in mobile platform, we have expanded to the platform for personal computers.

Now, not just one image is specified for display, but a set of variants of this image in the form of an archive. This archive contains options for different resolutions and under different variants interface. For display, the platform selects an option that matches the current DPI and scale of the form.

For example, now the flag image is a set of several options: for platform 8.2 (regular interface), for platform 8.3 (interface Taxi), for compact mode, for different scales.

Pictures stored in the configuration can also be presented as a set. Now for a picture you can set not only the screen density (scale), but also the interface option for which the picture will be used.