Namely... about the capabilities of lg smart TV.

In versions of lg smart tv with webOS functionality, it is possible to download third party applications to watch TV programs via the Internet.

Of course, lg smart tv already has such capabilities, but it makes sense to consider other possibilities.

And so, Torrent TV.

Torrent technologies allow you not only to download files, but also to watch live online broadcasts on your computer and TV! For this purpose, the portal “First Torrent Television” was created.

All online broadcasts are provided by a P2P network consisting of many users who watch the same channels. This method of viewing has many advantages, the main one is watching broadcasts without interruptions!

Thanks to the many users of the P2P network, the servers are not overloaded; all traffic is distributed between the users of the P2P network themselves. Thanks to this, this portal is not afraid of overloads and is able to withstand any sporting event!

Watching torrent television on LG smart TVs is possible using any third-party player (video player) that supports playlists, using local or server TS-Proxy.

You simply load the playlist (or download it from a link) into the video player and switch channels from the playlist list. The work takes place through a proxy, which acts as a “bridge to the p2p network”.

Main features of the official Torrent TV application:

Watching TV channels;
viewing TV archive;
management of favorite channels;
TV program;
TV guide;
support for local and server TS-Proxy;
support webOS TVs;
Personal Area, personal settings, etc.

You can download the widget here:

Instructions for installing the official Torrent-TV application on webOS TVs:

1. Unpack the contents of the archive torrent_lg.zip to HDD.
2. Copy the “developer” folder to the root of the USB flash drive.
3. Connect the USB flash drive to the USB connector of the TV.
4. When the message about connecting a new one appears USB devices, click cancel.
5. You will find the widget by pressing the Smart button on the remote control, among the small icons in the ninth position.
6. If the widget does not start, check your account authorization on TV by going to the menu - general - account management.

Official site:

On Samsung Smart TV series E 2012

*press the “Smart Hub” button on the remote control
*press the red “A” button on the remote control to enter
*create a new one account with the name develop and any password convenient for you
in new TV models the password is entered automatically
*after that, log in using this account
*a portrait of a man with the inscription develop should appear in the lower left corner


*select “Setting the server IP address.” (IP Address setup)
*Enter IP: 188.227.162.53
3. Update your widget list
*Use the “Tools” remote control button to open the “Service” section
*open the Settings menu
*select the “Developer” option
*select “Synchronize user applications”

Installation on Samsung Smart TV F series 2013

1. Create a new user on the TV named develop
*press the “Menu” button on the remote control (on the touch remote control, press the “Misc” button and use the arrows to select “Menu” on the screen)
*select the menu item “Smart Functions”
*select “Uch. zap. Samsung" then "Login"
*enter “El.p.”: develop
*enter password: sso1029dev!
if the password doesn't work, try leaving it blank
*check the box “Remember password”
*click “Login” and exit the menu
2. Change the widget update IP address to 188.227.162.53
*click the “Smart Hub” button
*select “Add. app"
*select “Param”
*select “IP Settings” and enter 188.227.162.53
3. Update your widget list
*click the “Smart Hub” button
*select “Add. app"
*select “Param”
*select “Start App Sync”
*after this procedure, the Torrent-TV widget should appear in the list of widgets

Installation on Samsung Smart TV H series 2014

1. Log in as develop user
*open the TV menu
*select “Smart Hub”
*select " Samsung Account»
*select “Log in”
*at the bottom select “Sign in”
*enter your develop login and check the box for automatic login
no password required
*click “Sign in”
2. Change the widget update IP address to 188.227.162.53
*go to “Smart Hub”
*select one of the applications
*select “IP Setting” and enter 188.227.162.53
all four groups of numbers, confirming each by pressing the central cross button of the remote control
3. Update your widget list
*go to “Smart Hub”
*select one of the applications
*hold the central cross button of the remote control until the synchronization menu appears
*select “Start User App Sync”
*after this procedure, the Torrent-TV widget should appear in the list of widgets
for the widget to appear in Smart Hub, you need to exit it and log in again

Installation on Samsung Smart TV J series 2015

1. Prepare a USB flash drive
*format the flash drive to FAT32
*create a userwidget directory on the flash drive
*download the archive with the widget
*copy the downloaded archive to the userwidget directory without unpacking it
2. Install widgets from a USB flash drive to your TV
*go to “SmartHub” on your TV
*connect the flash drive to the TV
*wait for the widgets to install
*after this procedure, the Torrent-TV widget should appear in the “My App” section
Watching torrent TV on Sony Smart TV

Torrent TV can now be watched on Sony Smart TV using local or server TS-Proxy. To view, you can use any video player that supports playlists. You simply load the playlist (or link it) into the video player and switch channels from the playlist list. The work takes place through a proxy, which acts as a “bridge to the p2p network”.

Watching torrent TV on Panasonic Smart TV

Torrent TV can now be watched on Panasonic Smart TV using local or server TS-Proxy. To view, you can use any video player that supports playlists. You simply load the playlist (or link it) into the video player and switch channels from the playlist list. The work takes place through a proxy, which acts as a “bridge to the p2p network”.

Watching torrent television on Philips TV Smart TV

Torrent TV can be watched on a Philips TV with Smart TV function using local or server TS-Proxy. To view, you must use either the official widget or any other widget that supports playlists.

But that's certainly not all! Not everything at all!

Now let's talk about players wound in this way.

Widget ForkPlayer 2.0 - 2.5 for LG smart TV

Main functions of the Fork Player widget for LG and webOS smart TV:

1. This is a program for watching movies online on LG smart TV
2. Playing online videos from sites: bigmir, brb.to (fs.to), EX.UA, tree tv, hdkinoteatr, Ekranka, moiserialy net, kinomax, video XXX;
3. Search video with function quick search
4. Select quality (720p, 480p, 360p) when playing vk and youtube links

Installing ForkPlayer:

1. Go to settings on your TV and select network connection.
2. Select a setting manually.
3. Select your network (access point) and in the DNS line write 85.17.30.89 (launch ForkPlayer directly) or 217.79.190.156 (launch the unofficial ForkStore application store, including ForkPlayer).

4. Launch the LG Store, go to “Applications” and install one of the applications: First Automobile, Russia Television and Radio (PREMIUM section) or Accu weather (only for DNS 85.17.30.89). If these applications are missing, make sure that the country of use of the smart phone in the settings is indicated as Ukraine or Russia.

Watch a video about lg smart tv

Launching the OTTPlayer widget on LG TVs.

All instructions: http://ss-iptv.com/ru/polzovatelyam

Unpack LG_WebOS_OTTPlayer.zip() to the root of the USB flash drive.
On the TV, log in to your LG SmartTV account.
Insert the flash drive into USB connector TV.
When a message appears about connecting a new USB device, click on House on the remote control and use the right buttons to find the widget in the Launcher list.

When you launch OttPlayer for the first time, it warns you in the form of a pop-up message about the need to enter registration data.
After launching the widget, go to settings.

You must fill in your username and password. The registration data completely matches the data you use to log into the website ottplayer.es

Here you can also configure additional options. We complete changing each option by pressing OK on the remote control. To save fields such as login and password, use the arrows to select the OK button on the on-screen keyboard and press OK on the remote control. If, after changing any item, you press Back on the remote control, the changes for the selected item will not be saved.

After changing all the necessary settings, press the red button on the remote control to save the changes. If you click Back, all changes will be lost.
After the first authorization, you will be asked to register a new device, or select one of the previously registered devices.

The device will be available in the list of your devices on the website. After the playlist is linked to the new device on the website ottplayer.es, you can update the data by pressing the red button on the remote control without restarting the widget.

Simple Smart IPTV

Simple Smart IPTV free application for LG TVs with the webOS operating system, designed for viewing streaming video.

SS IPTV today is a dynamically developing platform, an entertainment center inside your TV. IPTV from hundreds of content operators, broadcast channels, video from social networks, cloud services and video hosting sites - all this is available to our users with the capabilities of one single application!

The application only provides access to content supplied by the IPTV operator (usually your Internet provider). If this service is paid, all mutual settlements between the IPTV operator and the user are carried out without our participation.

If you do not have your own IP television operator or you could not find one in the list of supported providers, you can use the services of any OTT operator whose video streams are compatible with the LG Smart TV platform and independently download its playlist to our application.

All content posted in the Open TV section (exclusively in agreement with the copyright holder) is provided completely free of charge.

Specifically, like here: http://ss-iptv.com/ru/provideram

Let me remind you the point: the Application is installed directly on your TV with Smart TV technology, thus eliminating the need to purchase additional expensive equipment.

Kind of like a thought about everything I think about smart applications.

Now SS IPTV— the most dynamically developing among free widgets with the most adequate creators.
Peers TV— at first they were adequate, but now it has become simply impossible to use their product.
Comfortable TV- quiet horror. There is no other way to say it. Both their widget and their portal itself.
ott player— initially had a very good idea to organize a centralized storage of playlists for various devices.
The situation was aggravated by problems with their portal, without which the functioning of the player is impossible in principle.
ForkPlayer- not a bad idea. Functionality is up to par. But over appearance worth the work. The impression is spoiled by the linking of some of the functionality to their portal, the protection of which causes outright laughter.

So, the choice is yours!

However, if the TV is completely broken, you can do it on the computer!

To watch online TV through a web player you need:

1. OS Windows and availability Internet browser Explorer or Mozilla Firefox or Google Chrome;
2. Install the Ace Stream Media (TorrentStream) plugin; Download here... http://acestream.org/
3. Restart the browser.

You can always download the latest version of Ace Stream Media on the official website of the developer http://acestream.org

Attention!
When installing the plugin, be sure to set the directory for downloading videos, since the default drive is “C”, and the videos you watch will be automatically downloaded to the directory specified during installation. It is recommended to leave the directory for installing the plugin itself unchanged.

After installing the plugin, you must restart your browser! In rare cases, you may need to restart your computer! Watching online TV broadcasts will begin only after clicking on the “Play” button and after 100% buffering!

Attention!
If, while watching an online torrent broadcast, you observe a complete stop of the image and the beginning of the buffering process, we recommend increasing the Live buffer size.

To do this, right-click on the Ace Stream tray icon, select the “Options…” menu item in the menu that appears, enter the desired Live buffer size in seconds in the appropriate field. We do not recommend setting the buffer to less than 10 seconds or more than 60.

Attention!
During testing of broadcasts on the First Torrent Television website, it is necessary that “Login” and “Password” be specified in the Ace Stream Media settings test Do not change these values ​​after registering on the portal.

After testing is completed, we will additionally inform you of your username and password for the TS plugin! In order to check the current values ​​of the username and password, select the “Options...” menu item and look at the value of the “Username” and “Password” fields.

The concept of this plugin supports the basic ideology of P2P and the plugin options for this purpose include a parameter for determining the sending/distribution speed. Sending video is supported both while watching a broadcast, if you have free internet channel, and after, unless you forcibly disable the plugin.

After installing the AceStream distribution, open your browser and go to the broadcast page. To watch videos in your browser, follow a few simple steps:

If you are using Chrome browser:
1. Click on the icon of the blocked AceStream plugin in the address bar of your browser.
2. Select “Always allow modules for the site torrent-tv.ru”
3. Click on the “Done” button
4. Reload the page

If you are using the Firefox browser:

1. Under address bar browser, click the “Allow” button.

2. Select “Allow and remember” next to Ace Stream P2P Multimedia
3. Click on the "OK" button
4. Reload the page

Good luck, Friends!

After you complete developing the app, you might need to test your app. The Developer Mode app provides a faster way to install, debug, and test webOS TV apps on the TV. The following introduces the concept behind the Developer Mode app that connects between the TV and the PC.

To use the Developer Mode app, the following should be ready in advance:

This article provides:

Preparing a Login Account

To use the Developer Mode app, you need to be a member of the LG developer portal site. Please follow the below steps to create an account on the LG Developer site.

If you already have an LG Developer site account, skip this section and go on to.

Installing Developer Mode App

To install the Developer Mode app, follow the steps below:

Turn on your webOS TV and check if your webOS TV is connected to a network.

Sign in with your LG Developer site account.

Go to the LG STORE.

Search for "Developer Mode."

Select the Developer Mode app and click the Install button.

Turning Developer Mode On

After installing the Developer Mode app, you can enable the Developer Mode on your TV.

Developer Mode is disabled when:

The TV has been rebooted ten times while the TV is not connected to a network (webOS TV v1.x and v2.0).

Developer Mode has been enabled for 50 hours.

The Developer Mode login session is terminated.

After Developer Mode is disabled, the apps installed while Developer Mode is used are uninstalled, and you will be taken to the log-in screen of the Developer Mode app.

Connecting TV and PC

This section describes how to connect webOS TV and PC. Either the or can be used for the Developer Mode app.

Connecting with CLI

Follow the instructions below to add the target TV with the CLI:

Connecting with IDE

Follow the instructions below to add the target TV with IDE:

Extending Developer Mode Time

When you turn on the Developer mode, the Developer Mode app shows how much time has left of Developer mode (Remain Session). As you see, Developer mode enables for a limited time. If you want to extend the remaining time, click the Extend button. Then, the Developer Mode app will renew the time again.

Even the time has run out, you can extend the time with this button before TV power off.

Clearing Cache Data of Apps

The Developer Mode app provides the Clear Cache Data feature for testing. You can clear cache data of all apps with the following steps:

This feature will remove cache data of all apps on your TV.

When I first went into Smart TV on an LG TV, I didn’t immediately understand how to install it there additional programs and games. Yes, you can guess that programs need to be installed in the application, and games in Game World. But when I went into these applications, they didn’t even seem to launch, or they wrote something like “no access,” I don’t even remember.

The fact is that it's not that simple. First you need to create an LG account (if you don't have it), log in to the TV using your username and password and only then install the necessary programs.

As for the quantity and quality of programs and games, everything is very scarce (this is my opinion). I found only a few necessary programs for myself, and almost all games require a proprietary Magic Remote. Of course, the list available programs and games are being replenished all the time.

Let's start with the fact that your TV must support the Smart TV function and must be connected to the Internet in one of two ways: either.

This article uses the LG 32LN575U TV as an example.

Create an account on an LG TV

We need to register. This can be done as on the LG website (and then just log in with your details on the TV), and directly from the TV itself.

Go to Smart TV and select the profile icon (screenshot below).

Press the button Registration.

Read the user agreement and click Agree (it seems like you have to agree twice).

Enter the address Email, only indicate a valid address to which you have access. You will need to confirm it. And enter the password twice. If you didn’t manage to specify your password the first time, then it’s okay, I didn’t either :) Only when I specified letters and numbers did the system accept the password.

Click Registration.

If everything is fine, the TV will inform you that you need to confirm your registration and offer to open a web browser so that you can log in to your email. But it’s better to refuse, sit down at the computer, go to the mail and follow the link in the letter from LG Complete registration.

On the website you will see a message that your account has been verified and an offer to provide additional information to purchase applications. (if you are going to buy programs, I recommend that you resolve this issue immediately).

Now let's go back to the TV, if you didn't touch anything there, then email address will already be specified, all that remains is to enter the password (which you indicated during registration) and log into your account, which is what we do.

A message like this will appear (screenshot below), you can select No.

That's it, a green icon should appear next to the profile icon.

Installing applications and games on LG Smart TV

Attention! The list of applications depends on the region that is set in the TV settings on the tab Settings, in point Strange use of Smart TV.

As I wrote above, you can install new games and programs in already installed programs LG Smart World and Game World.

You can find these programs by going to the mode Smart TV and where there is a list of programs below, you need to press the button More…

If you want to install programs, then launch the application.

Choose the desired program. On the left, you can sort them, select, for example, only free ones.

A message will appear with the requirements that are required to work. this application. Click OK.

The download and installation status of the program will appear at the top. After installation, the program can be found in the general list in Smart TV, or by pressing the button MY APPS on the remote control.

We install games in the same way. Only in the program Game World. Although LG Smart World also has games.

How to remove a program or game from the TV?

Everything is very simple. Go to Smart TV and go to full list applications. There is a pencil-shaped button at the top, click on it.

Then select the right application and a menu will appear next to it, click Delete.

Everything, program, or game will be completely deleted.

That's all, I'm waiting for your comments. Best wishes!

Also on the site:

How to install programs and games on LG Smart TV? Create an LG account updated: February 7, 2018 by: admin

Modern technologies are becoming more convenient and simpler for users every day. This applies not only to computers, smartphones and other information technologies, but also ordinary household appliances such as televisions. Today, TVs from LG have a modern Webos operating system, which is filled with a variety of programs and widgets. At the same time, you can not only use the natively built-in applications, but also install them yourself. We will look in more detail in this article about what widgets and programs exist for Smart TV on the Web OS platform, as well as how to install and use them.

What is Web OS?

First, you need to understand what the Web OS operating system is. This operating system is used on all modern TVs from LG, which have been produced since 2014. The code of this system is open, which means that anyone who wants to create a program for Webos can do it with certain skills.

The average user can also easily connect any additional devices, and also make the necessary settings. Built-in animated assistant will help you do everything necessary actions, giving you valuable hints and other necessary information.

The Web OS interface is a menu in the form of a line at the bottom of the screen, which can be scrolled, thus selecting the necessary program or service. At the same time, you can watch not only broadcast but also Internet channels, as well as play any media files.

Widgets

The widget on the LG Smart TV Webos is a small graphics module that performs a specific function. Such a module can display the exchange rate, calendar, weather, display a television program, or act as a shortcut for more quick access to a specific program. Widgets do not clog the built-in memory of the TV, as they are relatively lightweight.

Essentially, widgets in LG Smart TVs with Web OS are used to expand the number of functions and adapt it to the interests, preferences and habits of the user. When you purchase a TV on Web OS, it already has a certain set of programs and widgets. But the basic set may not be enough for many people. To increase the number of features of your LG Smart TV on Web OS, you can download applications and extensions that interest you from the Internet.

Types of widgets

Today there are a huge number of widgets for Web OS. All of them can be divided into several groups:

• Global programs that can be used by many people in any part of the world;
• Local widgets, for local purposes, for example, designed only for Russian users.

When buying an LG Smart TV on Webos in Russia, you can be sure that the TV firmware installed on it will have Russian-language applications, as well as other widgets that are especially popular in Russia.

Also, all existing widgets for Webos can be divided by purpose into:

How to install

You can install absolutely any program or widget on your LG Smart TV based on Webos. Once you download or select it from the LG brand store, you will need to install it on your TV. Before doing this, you need to check whether this widget is suitable for your version of Web OS. To do this, go to the TV settings and select the appropriate item. Then it will appear on your screen full information O Web versions OS.

After this, you need to make sure that your LG Smart TV based on Web OS is connected to the Internet, and you are logged in to the network. Next, if you are in a company store of widgets for Web OS, you should click the “install” button and the process will start. However, please note that in order to install applications from it, you will first need to go through the registration process on the server. If you are installing a Web OS application from a flash drive, the installation process will be more complicated.

Let's start with the fact that in order to install applications from a flash drive, your LG Smart TV on Web OS must already have a program designed for watching IPTV. If there is such a program, then you should then connect a flash drive to the TV, onto which the archive with the widget you need was previously downloaded and unpacked. After the flash drive is connected, a corresponding icon will appear in the upper right corner, starting on which a window will open in front of you with a list of applications on the Web OS available for installation.

If you don't have an account

Install on Smart TV A Web OS-based TV application or widget is impossible without an account, so first you need to create an account. To do this you need to follow these steps:

1. On remote control control, press the Settings button;
2. Next, select “Quick” and click on “Account Management”;
3. After this, you need to select the “create an account” item and select all the items that appear;
4. After you do this, you should click on the “Agree” button;
5. Now you will need to enter your email address (identifier), which will act as your login, your date of birth, and password. After that, click OK;
6. Next, you should go to your email and confirm that you have registered;
7. Finally, you need to log in to the Web OS database. To do this, enter your email address, password and click OK.

Once you have an account, you can install any widgets and applications for Web OS.

Note.

With each generation of TVs, manufacturers make it more difficult to install custom applications. In this article we will look at the current method of installing applications through the development environment on LG Smart TVs running operating system webOS.

Installing the necessary programs

First of all, download Java, then Java installations download SDK. Be sure to download the ones that match yours Windows, 32 bit - X86 or 64 bit - X64.

Unpack the downloaded SDK archive and run Installer.exe. We agree with the rules.

In the window that appears, we refuse to install emulators in order to speed up loading; we won’t need them.

Check the boxes as in the screenshot below and click the next arrow.

After the installation is complete, we agree to reboot Restart Now.

Next, download the program Git and install it by default, without changing anything, press the button several times next And install.

Enable Developer Mode on LG Smart TV

First of all, register on the site. Click at the top of the site Sign In - CREATE ACCOUNT - Select your country - CONFIRM - Agree to the terms - AGREE - Enter your email and other data - CONFIRM. After registration, you need to go to your email and confirm your account.

After completing registration, go to the LG Store on the TV and log into the created account. In the search we are looking for an application "Developer Mode" and install.

Let's launch installed application Developer Mode and enter Login and password which was previously registered on the LG website.

We translate Dev Mode Status in a state ON.

In the message that appears, the TV will ask you to reboot, press the button RESTART. After restarting, go back to the application Developer mode P translate Key Server in a state ON.

Creating a new project

Go to PC and launch webOS TV IDE.

We create new project New webOS Project.

In the window that opens, enter Project name(no spaces and only Latin), select in Project Templatewebapp and press Finish.

Download the GetsTV application or others for LG Smart TV, open the archive and drag all the files into the created project.

Connecting a new device

In the lower right corner of the window go to the tab Target configuration and click the icon New connection.

In the window that appears, in the field Device Type choose LG Smart TV, in field IP address indicate the address from the application Developer mode and press Finish.

Right-click on the added device and select Properties.

In the window that appears, in the field Passphrase enter the value from the field of the same name to application Developer mode . Press the button Apply And OK.