Full instructions by phone firmware Samsung Galaxy S3 on CyanogenMod 11 with Android 4.4 KitKat.

Follow the instructions exactly and you will succeed! At the beginning of the process, make sure that your smartphone is charged more than 50%! Those who already have custom recovery installed can immediately proceed to point No. 8.

1. Immediately create a folder on the disk with English letters or numbers for

the necessary files (for example: C/:i9300).

Download touch recovery-clockwork-touch-6.0.4.4-i9300.tar.md5

Download Odin PC Odin3_v3.09.zip

Download the Google application kit gapps-kk-20140105-signed.zip

Download SAMSUNG USB Driver for Mobile Phones v1.5.29.0.exe

Download the rootkit CF-Auto-Root-m0-m0xx-gti9300.tar.md5

Download the standard recovery-clockwork-6.0.4.3-i9300.tar.md5

Download latest firmware CyanogenMod 11

3. Disable everything unnecessary on your computer:

If the Kies utility is installed, then you have 2 methods:

Remove Kies

Go to the application manager (ctrl+alt+del) and end all processes that say Kies

Disable the installed antivirus.

4. Install the programs needed for the firmware:

Install drivers SAMSUNG USB Driver for Mobile Phones v1.5.29.0.exe.

Unpack Odin3_v3.09 (Extract to Odin3_v3.09).

5. Switch your smartphone to Download Mode:

Turn off your smartphone completely, everything should go out.

Press three buttons at the same time - Power, Volume Down and Home

A warning will appear, you must click "Volume Up"

"Downloading" will appear with a green robot in the middle.

6.1. Install root rights for Galaxy S3:

CF-Auto-Root-m0-m0xx-gti9300.tar.md5, which you downloaded to the i9300 folder

6.2. Rooting

The installation process will be quick

Then you will see the message “RESET” and the smartphone will reboot into root installation mode

Then the smartphone will reboot into normal mode.

Disconnect your smartphone from your PC

7. Install recovery (cwn) on Galaxy S3:

Follow step 5!

Launch Odin3 v3.09, which should be in the Odin3_v3.09 folder

Click on the PDA field and find the file recovery-clockwork-touch-6.0.4.4-i9300.tar.md5 or recovery-clockwork-6.0.4.3-i9300.tar.md5, which was downloaded to the i9300 folder

Connect your smartphone to the PC with the original cable, the first ID:COM field will light up blue.

If all previous tasks are completed and completed successfully, click "Start"

Once completed, you will see the message “RESET” and the smartphone will reboot.

8. Install CyanogenMod firmware 11 on Galaxy S3:

Turn on your phone

Connect your smartphone to your PC in disk mode

Copy to internal memory smartphone:

Firmware cm-11-20140123-NIGHTLY-i9300.zip

Google application kit gapps-kk-20140105-signed.zip

Turn off your smartphone completely

Press three buttons at the same time "Power + Volume Up + Home"

The smartphone should boot into recovery

In a loaded recovery, do the wipes in order:

Wipe data/factory reset

Advanced -> Wipe dalvik cache

Wipe cache partition

Mounts & storage -> format/system

Then install the firmware and utilities in this order:

Install zip from sdcard, find the firmware archive cm-11-20140123-NIGHTLY-i9300.zip

Install zip from sdcard, find the archive gapps-kk-20140105-signed.zip

Restart your smartphone. If you do everything correctly, you should see an animation of the loaded Cyanogenmod 11 and then the phone itself will load with the new firmware. The download itself will take longer than usual!

If your smartphone is several years old and you are already tired of it, is it possible to breathe new life into it? Make him please you again for some more time? Most users will most likely say that no, the smartphone is outdated, there is not enough RAM, the processor is no longer “cake”, there is not enough built-in memory, and the screen resolution has begun to hurt the eyes. I won’t even say anything about the lost battery capacity. But if you have a popular flagship from previous years, then you can still do something.

Battery replacement

In most cases, the battery starts to fail first. A year, a maximum of a year and a half, and we notice that our smartphone hardly “survives” not only until the evening, but even better until lunch. If the battery is removable, then the problem is minimized.For some smartphone models it is not difficult to find an original battery. True, the price will not be entirely humane. A good alternative would be Craftmann batteries. Finding such a battery will not be a problem.

Again, there are many alternative options, let's consider one of them. This is a monstrous battery, with a stated capacity of 6400 mAh. Comes with back cover for a smartphone, instead of the original one. When installing all this, the smartphone is completely disfigured, but you get a guaranteed two days of work.

You can, of course, carry a portable battery with you everywhere, or constantly keep your smartphone on charge at your workplace, but you must admit, each of us wants more autonomy from our smartphone, therefore, replacing the battery cannot be avoided, in any case.

Bored or lagging firmware

Now we come to the most interesting part. Most users of Samsung's early flagships sooner or later encountered the problem of “brakes” on their smartphone. The desktops were scrolled through with noticeable slowdowns, the dialer opened for several seconds, the camera took a long time to start up... All this began to irritate, and some users decided to reflash their smartphone to custom firmware. In our case, there are very, very many different options. Perhaps the most stable and supported firmware is Cyanogen Mod. Samsung stopped updating its 2012 flagship SGS3 for a very long time. The latest official version of Android there seems to be 4.2.2. or 4.3.1. But the Cyanogen Mod firmware is already available on Android 6.0.1. Of course, there will most likely not be an Android 7 for this smartphone, but thanks to the developers for that too. But as of this year, to the great regret of fans of this firmware, the Cyanogen Mod project has been closed... Perhaps enthusiasts will release their modifications for some time, but officially, we will no longer receive Cyanogen Mod. But there is good news, instead of Cyanogen Mod, we got LineageOS, and thanks to it, our SGS3 still received Android 7.1.1!!!

A brief overview of LineageOS for the 3rd Galaxy.

Firstly, I want to say that interaction with the smartphone interface does not leave a depressing impression, as with stock firmware. But still, you shouldn’t expect much either, the hardware is old. The smartphone works quite quickly, but turns on with some delay. The dialer opens faster than on stock, desktops turn over smoothly. Applications open in different ways, some quickly, and some take 2-3 seconds to complete. But we have Android 7.1.1! True, the assembly is “nightly”, that is, some functions of the smartphone and programs may not work correctly. There were already stable builds on the Cyanogen Mod firmware, and in general, the operation of the smartphone was satisfactory. But enough about Cyanogen Mod, let's explore the features of the LineageOS firmware. In the smartphone settings, in the “About phone” section, we can see information about the phone’s status, device model, Android version and firmware:
This is what the main screen looks like:
A few words about applications from Google, after installing LineageOS, they simply do not exist, and we will have to install them ourselves. It's as simple as installing the firmware itself. When you have flashed LineageOS, without leaving recovery, install GApps (a package of programs and services from Google). You can download them. And after installing all this, we will see the following picture: all Google applications will appear on your smartphone!

Unlike, for example, MIUI, our firmware has an application menu:
The notification shade, as on all smartphones, is called up by swiping from the top of the screen down; if you make a short swipe, notifications will open; if you swipe long, then icons for various switches will open:

In general, the LineageOS firmware is close to “naked” Android, only there will be more settings. For example, you can change the color of the indicator for different events. In stock, there are only three colors, but on LineageOS you can mix these colors the way you want.

What else can you tell about this firmware? The camera interface is very primitive. List of recent running programs looks like a bare Android.

Here are some more screenshots of the battery menu:

This is what the settings menu looks like:

In general, everything is simple and functional, it doesn’t even have its own themes like the Cyanogen Mod, but over time, I hope the developers will fix this. It remains to solve the main question, how to install all this? Yes, so that the smartphone does not turn into a “brick”?

Install LineageOS firmware on SGS3

Now we come to the most important thing. If you already have custom recovery installed, for example TWRP, then everything is very simple. Let's do everything in order and without fuss:

1.Download and copy the firmware to the smartphone, to the memory card (Micro SD Card) in the root directory. Download the corresponding Android versions Gapps and copy Gapps to your smartphone, to a memory card (Micro SD Card) in the root directory.

2. Turn off the smartphone

3. Simultaneously press the “volume+”, “home” and “power” buttons, when the Samsung Galaxy S3 logo appears, release the buttons, and after a few seconds we get to the main recovery menu.

4.Select “cleaning”, then “selective cleaning”

5. Check the items Dalvik/ART Cache, Cache, Sistem, Data. Item “Int. The memory “can also be cleared, but not necessarily. IMPORTANTLY DO NOT CHECK THE “Micro SD Card” CHECK!

6. With a casual swipe to the right, we give the command to clean.

7.After successful cleaning, we return to the main menu and select the “Install” item, then the item (parent directory) and finally we reached the “external_sd” item. Click it and select the file with the firmware.

8. Swipe to the right again and wait for the firmware to finish. Upon completion of this operation, you will be prompted to clear Dalvik and Cache. This can be done, but it can also be ignored.

9.Select the “Install” item again, then the (parent directory) item and the “external_sd” item. Click it and select the file with Gapps.

10. Swipe to the right to confirm the installation.

11. After installing Gapps, you can agree to clear Dalvik and Cache one more time and then, in the main menu, select “Reboot” and click on the “System” button.

The download process will take quite a long time. When everything is installed, you will be asked to select a language, set the time and enter your Google account. After that, you can familiarize yourself with and evaluate LineageOS.

Firmware samsung smartphone galaxy siii via odin.

Instructions for flashing a Samsung Galaxy S3 smartphone using single-file firmware via the Odin 3 program on Windows

Any digital device, be it a player, phone, camera, computer or even a smart watch, will not perform its functions without software(BY). Without software, a computer is just a piece of hardware; therefore, in order not to be just a piece of hardware, an operating system (OS) is installed on the computer. The phone also has an OS installed, which is popularly called “firmware”. Firmware is a set of hardware settings and software that are located in the device’s memory. So, in this article, let's take a closer look at why people change the firmware on their phone.

If a phone we just bought works great, doesn’t show any errors, “flies” and so on, then a phone that has served us for some time may slow down, work intermittently, be glitchy, have an outdated design, or a manufacturing defect. , do not install applications because the firmware is outdated, and so on and so forth. If in case of brakes it is possible to do full reset phone settings, then when eliminating glitches, defects or unstable operation of the device, it is recommended to update the firmware to a newer version.

Usually Android smartphones themselves offer to update to automatic mode, but there are times when our smartphone is infected with a virus or does not turn on at all or freezes while loading, then in this case we will have to install the firmware ourselves.

1. Preparing and downloading everything you need

Before flashing the phone firmware, you need to download:

1. USB driver for Samsung phones(in our case, we used driver version 1.5.59.0 dated 01/08/2016 called SAMSUNG+USB+Driver+for+Mobile+Phones+1.5.59.0+SSPC.exe);
2. Firmware(we used stock non-camera Android firmware 4.3 XXUGOE1 (SER) (05/21/2015) Changelist 2833503, download);
3. Odin PC program(we used Odin3 v3.09.3).

2. Installing programs

First of all, you need to install the USB driver for samsung phones, then unpack the Odin program into a directory without Cyrillic (Russian) letters, drive C is usually suitable. In the same folder where Odin was unpacked, we throw the firmware, unpack it and see 2 files: the first in the format .tar.md5, the second SS_DL.dll (second dll file can be deleted).

3. Switch the smartphone to Download Mode

To do this, turn off the phone completely by pressing the power button. We wait until the device screen goes off.

4. Odin program and smartphone firmware process

So, now we launch the program by double-clicking on the Odin3 v3.09.exe file. The following window should appear:

In the "Option" section, leave the following checkboxes: "Auto Reboot" and "F. Reset Time". And in the “Files (Download)” section, click on the “PDA” button and select the file with the firmware. After the completed manipulations, connect the cable to the phone, in turn, the blue “ID: COM” label should light up in Odin.

Now the most important thing is to press the “Start” button and wait until the phone is flashed (1-5 minutes). When the phone is flashed in the program, the inscription "PASS" will light up at the top, and at the bottom " All threads completed. (succeed 1 / failed 0)", which means “Everything is just cool and without errors!”, Now we disconnect the cable from the phone, close the program and wait for the android to load on the phone itself.

Hello, today let me show you how to flash Samsung GT-I9300 Galaxy S3 standard firmware and rooted (or rooted?). Since the amount of information on this device is quite large, I decided that service codes, custom firmware and backup of this model I’ll tell you next time. Everyone already knows what kind of beast this is - there are a lot of reviews and reviews on the Internet.

Initially, the device was supplied with Android version 4.0.4 “Ice Cream Sandwich”, they still deliver them with this old software, but you can already update it to version 4.1.2 “ Jelly Bean", they also promise an update to version 4.3 at the end of the year - we’re still waiting. Initially, in the first versions, the device was wildly glitchy, froze, turned itself off, applications stopped working (processes were terminated urgently), lost the network and stupidly died - it turned off for no particular reason and would not turn on again - on servers they stupidly changed the boards under warranty (who was lucky) and They explained that this was a factory defect, but about a year later the situation leveled out and there were fewer such jambs, which Samsung engineers could correct.

The main drawback of this device today is its fragility - if you pressed or pinched it a little and God forbid you dropped it, a crack in the sensor is guaranteed, and this means replacing the entire display module (up to 8,000 thousand rubles for repairs in some sharashkas). So be careful. And let's get started with the firmware.

ATTENTION!!! Before starting software updates, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

Samsung GT-I9300 Galaxy S3 - software update and ROOT rights.

Before we start flashing the firmware, let's first prepare everything we need:

• Let's fully charge the battery;

• MicroUSB Any cable will do, but it’s better to take one from the kit;

• Firmware, latest version -I9300XXUGOE1 ;

• Flasher program - Odin3 v3.04 ;

• Drivers - install kies (when updating the software, do not run this application, or better yet, go to the task manager and kill all processes called kies). But it’s better to install the drivers there and post about how to install them correctly;

• Personal computer or laptop of average configuration with operating system WIN7 SP1 should be enough;

• CF-Auto-Root-m0-m0xx-gti9300.tar - firmware file for rooting.

First do backup copy all data or use the KIES program to save all necessary files on computer. Soon there will be an article on how to backup the firmware - I’m already writing it. You can download all files at the end of the article.

Samsung GT-I9300 Galaxy S3- factory firmware.

Step 1:If you have not yet charged the battery, then it’s time to do it, insert the battery into the phone and enter the device into DOWNLOADING mode - to do this, first press and hold HOME button(central), then the volume down key and then the power button.

Step 2:Information will appear warning us about possible problems with the phone when using modified firmware. And it offers to either continue or restart the smartphone. Continue pressing the volume up key. A green android robot should appear. We are on the right track.

Step 3:Download the archive with the firmware and flash driver and launch the application Odin3_v3.04.exe.

Step 4:The main window of the flashing program appeared in front of us Odin3 v3.04.

Step 5:And so, the smartphone is entered into download mode, the battery is charged, important information saved, drivers installed (do not forget to “kill” all Kies processes if you installed it). We connect the cable to the phone - the com port should be detected and a line with the word Added will appear - this is a good sign, it means that the device has been detected by the PC.

Step 6:Now it’s time to configure ONE - selecting firmware files:

PIT -mx.pit

Bootloader - BOOTLOADER

PDA - CODE _I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5

PHONE - MODEM _I9300XXEMG4_REV02_REV04_CL1360150.tar.md5

C.S.C. - C.S.C. _OXE_I9300OXEEMH1_CL1359224_REV00_user_low_ship.tar.md5

BE CAREFUL - CHECK SEVERAL TIMES!!!

If everything is fine, press the START button.

Step 8:"PASS"- in about five minutes the device will be flashed. All, Samsung GT-I9300 Galaxy S3 ready to use. You have the latest firmware version.

Step 9:Reboot and check the software version by typing the following code on your phone keypad *#1234# .

Obtaining ROOT rights.

If you still decide to root your Samsung GT-I9300 Galaxy S3, it means you are aware of what you are doing and take full responsibility upon yourself. And so let's get started:

Step 1:Download CF-Auto-Root-m0-m0xx-gti9300.tar - This is a rootkit, so you will need to disable your ANTI-VIRUS, unzip this archive. The final file must have a .tar or .tar.md5 extension.

Step 2:We switch the device to DOWNLOADING mode - see the instructions above.

Step 3:Let's launch application Odin3 v3.04.exe.

Step 4:Select the rootkit file and put it in the field PDA. If you have version androida 4.1.x, then be sure to uncheck Auto-reboot.

Step 5:We connect the phone with a cable to the computer and press the Start button. In a minute, the device will flash, and since we unchecked Auto-reboot- turn off the device manually and enter it into recovery mode by holding the volume up button in turn, then the HOME button and the power button. Root rights are automatically installed.

Share:

Articles and Lifehacks

The firmware for the Samsung Galaxy S3 will be suitable for you to update to the latest version, as well as to correct old errors in operation and, of course, introduce new versions of them.

It often happens that good old bugs are much more familiar and nicer than new evil glitches in the operation of a smartphone, so think carefully before changing the firmware.

And if you think about it, then make a backup previous version, so that later you won’t be excruciatingly painful for the aimlessly destroyed smartphone, which still has life to live.

Preparing for firmware

To prepare, you will need new firmware for the Samsung Galaxy S3; the official release can be obtained from the official website, and the unofficial one from many unofficial ones.

And the CWM Recover program, with which you can easily install new firmware.

Step-by-step instruction

1. Install the firmware update program from the CWMManager.apk file. We boot into recovery mode, to do this we simultaneously press “Volume up”, “Home key” and “Power button”.
2. Be sure to make a backup copy; if the update fails, you will be able to roll back to a previous working version. For backup, select “Backup and restore”.
3. Then, to prevent colds, you need to clear the cache virtual machine dalvik, to do this we do the following: click “WIPE cache”, then “Wipe data”, select the “Advanced” item, and then boldly click wipe Dalvik Cache.
4. The phone is almost ready for flashing. Then, with even hands, in the update program, select “Install zip from sdcard” from the list, select your firmware and, confirming your sanity, wait for the miracle of the update.
5. After installation, select “Reboot system now” and enjoy your wonderful new Samsung Galaxy S3.
6. If your phone suddenly freezes while updating, then turn off the phone, and not against the wall, but with the power button, press and wait for the power to turn off.
7. Next, we boot into recovery mode again, read how to do this above. Again we clear the cache and select “Backup and restore”, and then confirm the restoration from the backup.