1. How to make an automatic Internet connection if I don't have a router? My computer has two operating systems, Windows 7 and Windows 8, Internet services are provided by the Beeline provider. I want the Internet to connect automatically when I turn on the computer, for example, I turn on the computer and the Internet connects itself, and I don’t need to click on any Beeline shortcuts. I myself tried numerous recommendations from the Internet, but it didn’t help: 1) Created a task using the task scheduler. 2) Created a bat file (batch file) and placed it in the "Startup" folder at C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp. 3) Created a dial-up connection and everything was useless. Windows 8 is especially alarming; according to rumors, it is generally impossible to make such a connection without a router.
2. Hello admin, please tell me, how to make an automatic internet connection when starting the Windows 8 operating system, the most important thing is that this method is simple and suitable for all existing Internet providers, for example: Beeline, Dom.ru, MTS and so on.

How to make an automatic Internet connection

Hello friends, I often have to hang around my friends and set up an automatic Internet connection after installing the operating system. In today's article I will show you how to do this if you have not yet purchased a router. In fact, there are a lot of options and a dozen instructions could be written, but almost all of them are ineffective in the new Windows 8.1 operating system.

But there is one universal, and most importantly simple, method that works with all providers and in all the most common operating systems: Windows 7 and Windows 8, and even Windows XP. We will use little-known features Windows, the Rasdial command, is what performs automatic dialing for Microsoft clients.

Note: after successfully creating an automatic Internet connection, quit your Opera, Mozilla or Google Chrome will also launch automatically!

We will create a string parameter in the registry and indicate in it the name of our provider, login and password, then reboot and automatically access the Internet.

So, before work, just in case, create a system restore point, then right-click in the lower left corner and select “Run”

Enter the command “regedit” into the input field and click OK.

We are in the registry, here we find the section responsible for autoloading

For all users:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

or for the current user:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

In my case, for the current user

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

Right-click on an empty space in the section and select New -> String Parameter.

ATTENTION!

The method works on 8.1 only if the connection name consists of one word.

Will work - Beeline

Will not work - Beeline Internet.

Right-click on the parameter we just created and select Edit.

Then, if your provider is Beeline, in the Value field we write:

rasdial space "The name of your connection in quotes, which can be viewed in the Network and Sharing Center shared access->Changing adapter parameters, for example Beeline ",

First, let's look at the example of Windows 7. Open Start -> Control Panel -> View network status and tasks -> Set up a new connection or network -> Internet connection -> High-speed (with PPPoE) ->

Enter the information received from your Internet service provider: Username and Password. Check the "Remember this password" checkbox. We can leave the connection name as is. We wait for a message about the successful creation of the connection and close the dialog box.

Now let's make our PPPoE connection connect automatically. In the Network and Sharing Center, go to the link "Change adapter settings"

Right-click on the newly created connection -> Properties -> Options tab -> Uncheck the option Prompt for name, password... -> OK

Right-click again on the newly created connection -> Create shortcut -> Yes

Now we find the shortcut for our connection on the desktop -> Right mouse button -> Copy. Open Start -> All programs -> Find the Startup folder and right-click on it -> Open -> Right-click in this folder -> Insert shortcut

All is ready. Now when the machine boots, the PPPoE connection will connect automatically. Now let's move on to windows 8.1

Things are a little different here. First, I recommend setting the desktop to turn on automatically when you start your computer. To do this, on the start screen, click the “desktop” tile, on the lower taskbar, right-click -> Properties -> Navigation tab -> Check the box “When logging in and closing all applications, open the desktop instead home screen"

Secondly, let's enable the display of the "my computer" icon on the desktop. In an empty space, right-click -> Personalization -> Change desktop icons -> Check the box "My Computer" -> OK

Next, the procedure for creating a connection is similar to Windows 7, but the auto-connection setting is different. Download the reg file, go to downloads (or to another place where the download occurred) -> Right mouse button on the file -> Edit. Here we need to change only two things: instead of your_login and your_password, we enter the login and password, respectively, that we used when creating the PPPoE connection. In addition, if you changed the name of the connection, then instead of “High-speed connection” we enter the previously entered name. We close the file and respond in the affirmative to the save request. Now just run the reg file by double clicking -> agree with the message. After the system restarts, PPPoE will connect automatically.

Or we can do everything by hand. Point the arrow at the Start menu->RMB->Run "regedit"), find the following branch: "HKEY_CURRENT_USER\Software\Microsoft\windows\CurrentVersion\Run" In this branch, create a "string parameter" (right mouse button -> "Create" - > “string parameter”) with an arbitrary name. As a parameter for this entry we write:

rasdial "your_connection_name" your_login your_password

Close the registry editor. The changes will also take effect after a reboot.

It is also worth noting that the method with the registry is valid not only for windows 8 / windows 8.1, but also for windows 7 (Possibly for windows XP, I have not checked).

lazvm-comp.ru

Setting up an automatic Internet connection in Windows 7

If you use your computer to access the Internet PPPoE connection, L2TP or PPTP, it may not be entirely convenient to start the connection manually again every time you turn on or restart the computer. In this video we will talk about how to make the Internet connect automatically immediately after turning on the computer. It is not difficult. The two methods described here are equally suitable for Windows 7 and Windows 8.

Source: wikitubechannel.blogspot.com

Did you like the post? Support Chips, click:

Partner news

fishki.net

How to set up an automatic Internet connection in Windows 10

Good afternoon, dear reader! If you don’t have a router that independently establishes a connection to the Internet (via PPPoE, L2TP, PPTP) and every time you turn on the computer you have to manually connect to the Internet, then you would probably like to make this ritual automatic. In this article we will figure out how to do this in Windows 10 using the “Task Scheduler”.

Step 1 - Launch Task Scheduler

And so to launch the task scheduler we will use search bar on the taskbar. To do this, enter “Task Scheduler” in the search field and in the search results you will see the application we need, as shown in Figure 1. Click on it to go to the next step.

Figure 1 - Launching the task scheduler

Step 2 - Create a task

If you did everything correctly, you will see a window as shown in Figure 2. And so, at this step you will need a login and password from your Internet provider, usually it is specified in the contract. And also the name of the connection through which you are in this moment connect to the Internet.

Figure 2 - Task Scheduler

Create a simple task

In the first step, specify the name of the task: in the name text box, enter a name, for example “Automatic connection to the Internet” and click next.

Figure 3 - Creating a simple task

Trigger

After which, in the second step, we need to answer the wizard’s question, how often do we want to run the task? Here we select the item when entering windows, as shown in Figure 3. And again click on the next button.

Figure 4 - Trigger

Action

And in the next step “Action”, select “Run the program” and click the next button.

Figure 5 - Action

Starting the program

The final step, in the "program or script" text box, enter the following:

For 32-bit systems

C:\windows\System32\rasdial.exe

For x64-bit systems

C:\windows\SysWOW64\rasdial.exe

Next, in the "Add arguments" field, enter: Connection_name Login Password. Enter the name of the connection through which you connect to the Internet, if it contains spaces, put it in quotes and, accordingly, then enter the login and password from your Internet provider separated by a space. as shown in Figure 6. Then click next and the button is done

Figure 6 - Launching the program

Conclusion

If you did everything correctly, the next time you turn on the computer, a black window will appear on the screen for a few seconds, after which it will automatically connect to the Internet. It is worth noting, this method does not work when exiting sleep mode.

helpcompservice.ru

How to set up an automatic Internet connection when you turn on your PC |

If you are using a high-speed connection that requires you to enter a username and password, you must manually connect to the Internet. Many users would like the Internet connection to be established automatically. There is, according to at least, two ways to organize such a connection.

The simplest and most correct solution is to place a shortcut to your Internet connection in the computer's startup folder. However, many may have noticed that in Windows 7 there is no way to place its shortcut on the desktop at the stage of creating a connection. To create a connection shortcut, open the section (Network and Sharing Center), which is located in (Control Panel). In the left panel, go to the subsection (Changing adapter settings). Everything will be presented here network connections And network adapters computer. Minimize the window so that the desktop is visible. All that remains is to drag the selected connection onto the desktop using the mouse. The shortcut created in this way is placed in the Startup startup folder, which is located here C: Users\Name\user\AppDataRoaming\Microsoftwindows\Start Menu\Programs\Startup Now, after restarting the computer, a connection to the Internet will automatically occur.

Another way is to create batch file, which specifies the Internet connection parameters: login and password. Create Text Document(TXT) anywhere and write one line in it:

Rasdial NameInetConnect username password

Rasdial – the command that will connect to the Internet;

NameInetConnect – The name of the Internet connection that is used to access the Internet; username – login for accessing the network; password – the actual password for making the connection. Then save and close text file. Rename the file extension from (TXT) to (BAT) and place it in your startup folder:

From:Users\Username\AppDataRoaming\Microsoftwindows\Start Menu\Programs\Startup

The file name can be anything. This method has one significant drawback: when connecting to the Internet, the computer user will see the connection login and password, which may be undesirable, especially if the computer has a large number of users and knowledge of the connection parameters is highly undesirable.

comphelpmoscow.ru

Automatic Internet connection

This instruction will make life much easier for users of operating systems. windows systems 7 and windows 8 connecting to the Internet via PPPoE. The connection technology can be either ADSL or FTTB, or GPON if the optical modem is configured in Bridge mode. Every time you turn on your computer, you have to go to network connections and start the Internet connection manually. I'll tell you how to make an automatic connection to the Internet. So, the procedure is:

1. Go to the Network and Sharing Center. (How to access Network Sharing Center)

2. On the right side, look for the link Change adapter settings in the menu and click on it. 3. Right-click on the desired High-Speed ​​connection and select the Properties menu item. 4. Select the Settings tab and uncheck the boxes Display connection progress, Request name, password, certificate, etc. 5. Click OK. 6. Again, right-click on the High-speed connection and select Create shortcut. The system will tell you that it can only create a shortcut on the desktop - we agree with this and click Yes. A shortcut to your High Speed ​​Internet connection will appear on your desktop. 7. Open the Start menu → All programs. We are looking for the Startup item. Right-click on it and select the menu item - Open.

2016-09-07 07 September 2016 Internet and networks 13 39843

Good afternoon, dear reader! If you don’t have a router that independently establishes a connection to the Internet (via PPPoE, L2TP, PPTP) and every time you turn on the computer you have to manually connect to the Internet, then you would probably like to make this ritual automatic. In this article we will figure out how to do this in Windows 10 using the Task Scheduler.

Step 1 - Launch Task Scheduler

And so, to launch the task scheduler, we will use the search bar on the taskbar. To do this, enter “Task Scheduler” in the search field and in the search results you will see the application we need, as shown in Figure 1. Click on it to go to the next step.

Figure 1 - Launching the task scheduler

Step 2 - Create a task

If you did everything correctly, you will see a window as shown in Figure 2. And so, at this step you will need a login and password from your Internet provider, usually it is specified in the contract. And also the name of the connection through which you are currently connecting to the Internet.

Figure 2 - Task Scheduler

In the first step, specify the name of the task: in the name text box, enter a name, for example “Automatic connection to the Internet” and click next.

Figure 3 - Creating a simple task

After which, in the second step, we need to answer the wizard’s question, how often do we want to run the task? Here we select the item when logging into Windows, as shown in Figure 3. And again click on the next button.

Figure 4 - Trigger

And in the next step “Action”, select “Run the program” and click the next button.

Figure 5 - Action

The final step, in the "program or script" text box, enter the following:

For 32-bit systems

C:\Windows\System32\rasdial.exe

For x64-bit systems

C:\Windows\SysWOW64\rasdial.exe

Next, in the "Add arguments" field, enter: Connection_name Login Password. Enter the name of the connection through which you connect to the Internet, if it contains spaces, put it in quotes and, accordingly, then enter the login and password from your Internet provider separated by a space. as shown in Figure 6. Then click next and the button is done

Figure 6 - Launching the program

Conclusion

If you did everything correctly, the next time you turn on the computer, a black window will appear on the screen for a few seconds, after which it will automatically connect to the Internet. It is worth noting that this method does not work when exiting sleep mode.

Many providers around the world offer their Internet services through the so-called high-speed PPPoE connection (Point-to-Point Protocol over Ethernet). To connect to the Internet via PPPoE, ISPs usually give their customers a unique username and password, which are required to connect to their networks.

The disadvantage of PPPoE is that you have to manually start the connection every time you turn on the computer. This is an annoying inconvenience that many users would like to forget about once and for all. In this article, I will talk about the settings with which a computer with such a connection will connect to the Internet automatically during startup.

1. Launch the task scheduler

First of all, we need to launch the regular task scheduler. The simplest and quick way to do this is to use the system search window. Enter the first few letters of your keyword and then click on “Task Scheduler” in the search results.

In Windows 10, Task Scheduler can also be launched from the Start menu: All Applications\Administration ToolsWindows.

In the control panel it is located at the following path: Control Panel\System and Security\Administration.

Regardless of the chosen method, you will see the following window as a result:

2. Schedule automatic connection upon login

Now we need to schedule an automatic connection to the Internet every time we log in.

In the task scheduler window on the right, click “Create a simple task.”

In the task creation wizard window, enter a name for the task, for example, “Auto dial”. You can also enter a description, but this is not necessary. Click “Next”.

Next, we need to choose when exactly our task should be performed. Since our goal is for the PPPoE connection to automatically connect to the Internet every time we log in, we select “When I log on to Windows.” Click “Next”.

The penultimate stage of creating a task is choosing an action. We need the PPPoE connection to start automatically with Windows. Accordingly, select “Run program”. Click “Next”.

Now the most important part of the process is setting up a script that will be executed automatically.

In order for the system to automatically connect to the Internet via PPPoE, you must enter the following information:

• In the Program or Script field, enter the command rasdial.
• The "Add arguments (optional)" field must contain the connection name (in quotes) and the username and password preceded by a hyphen. For example, let's say your PPPoE connection is called WWW, and to connect to it you use the username Ivan and password 123456 . In this case, you need to add the following arguments: " WWW"Ivan 123456.

Field " Work folder» leave blank.

At the final stage you will see short description created task. Click “Finish”.

After closing the wizard, you will be returned to the main Task Scheduler window, where you will see that your task has been added to the list of other scheduled tasks.

3. Restart the computer and check

Finally, restart your computer to check the results of your actions. If all steps were completed correctly, the system should connect to the Internet automatically after rebooting. Please note that from now on, each time you log in, a console window will briefly appear on the screen, signaling that the connection process has started.

Have a great day!

This article is for those who have not yet purchased a router and are connecting to the Internet on a computer. Although nowadays, with phones and tablets with Wi-Fi, I believe that it is much easier and more convenient to have Wi-Fi router and have an automatic connection to the Internet on it. But situations are different, and we will not go into details.

So, in fact, we have an Internet connection through technologies such as VPN, L2TP, PPPoe (This can also be used if you have configured your own VPN server). And we want the connection to occur in automatic mode when the computer starts even before the user logs in. In principle, there is nothing complicated yet, so let’s move on to the instructions.

1) We need the Internet connection name to be on English language. Rename it or set the correct name when creating the connection. I will use VPN.

2) This step applies to owners of Windows 7. Open the properties of the network connection, go to the “Settings” tab and uncheck the “Display connection progress”, “Prompt for name, password” and “Include Windows login domain”.

3) Next, open the Windows Task Scheduler. To do this, go to: Control Panel → "System and Security" group → "Administration" → "Task Scheduler" (or click Win+R and enter taskschd.msc).

4) Select “Action” → “Create a simple task”:

5) The “Create a Simple Task Wizard” will open. Enter a custom name and description. Click next.

6) Place a dot next to “When the computer starts.” If desired, you can select "When you log on to Windows", and the connection will be automatically created after the user logs in.

7) Select "Run program":

8) Now the fun part:
1) In the “Program or script” field, enter the program: C:\Windows\system32\rasdial.exe
rasdial.exe- a utility that has been built into Windows for a very long time and is used to work with network connections.
2) In the “Add arguments” field, write a command in the following form:

*connection_name* *user_name* *password*

where "username and password" is the username and password provided by your ISP.
In my case it will look like this (the data is fictitious):

VPN qazxderfv zxcvnzx

9) Check the box next to “Open properties for this task after clicking the “Finish” button and click “Finish”.

10) Switch the point to “Run for all users”. Check the box next to "Run with highest rights" and in the "Configure for:" section select our operating system. Click OK.

That's it, now when you turn on the computer network connection should turn on on its own.

Alternative ways to enable automatic Internet start:

I. Using the program autorun function.

I believe that this article will not be complete if I do not add several alternative methods. And the first one will be about creating and using a BAT file.

1) So, first of all, of course, we need to create a BAT file that will connect to the Internet. To do this, create a text file in a random location. And fill it with text in the following format:

cd %systemroot%\system32 start rasdial *connection_name* *username* *password*

2) Rename the file to VPN_autostart.bat. In order to change the file extension, you need to enable their display in the folder properties. In Windows 7, press the button Alt in Explorer and select "Tools" - "Folder Options". In Windows 8 and 8.1, switch to the "View" tab in Explorer, select "Options" - "Change folder and search options." There, on the “View” tab, look for the item “Hide extensions for registered file types” and uncheck the box. Click OK.

C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp" and copy the file into it.

That's it for the first time alternative way completed. It seems to be very simple, but for some reason it doesn’t always work.

II) Automatic start of the Internet through a registry entry.

The second alternative method is based on creating an additional parameter to start the network connection.

1) Open the registry by pressing the key combination Win+R and entering regedit, in the window that opens.

2) Open the following thread if you want to enable autorun for all users on the computer:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run

If you want to enable autorun only for the current one, then you need this branch:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

I will create for all users.

3) Create a new string parameter with the name StartVPN and give it the format value:

rasdial *connection_name* *username* *password*

Don’t forget that the VPN connection name should not contain Cyrillic characters. The next time you start your computer, your computer should automatically connect to the Internet.

III) Autostart the Internet by creating a new service.

This is another method that should automatically connect to the Internet before the user logs in.

sc create startVPN start= auto binPath= "rasdial *connection_name* *username* *password*" DisplayName= "StartVPN" depend= lanmanworkstation obj= "NT AUTHORITY\LocalService"

This will create a new service that will run after all system services have started. In my case it will look like this:

sc create startVPN start= auto binPath= "rasdial VPN qazxderfv zxcvnzx" DisplayName= "StartVPN" depend= lanmanworkstation obj= "NT AUTHORITY\LocalService"