There is a function Assistive Touch- therefore, reboot the gadget with the non-working key " Power"Simply enough. However, if the sensor fails, turning off the iPhone is more difficult: you will have to resort to Hard Reset– an operation that can cause damage to the device.

The need to turn off the iPhone without swiping across the screen usually occurs when the device freezes while installing a mobile application. The sensor also fails due to physical impact– for example, after a gadget falls to the ground. Most users, when the sensor freezes, immediately apply for warranty repairs, not realizing that they can do without the 45-day wait and fix the smartphone themselves.

The probability that after a reboot the frozen sensor will “resurrect” is 90%. But since the screen does not respond to touches, you will not be able to turn off the smartphone in the usual way - you will have to hard reboot. It is done like this:

Step 1. Press two physical buttons at the same time - " Power" And " Home».

Step 2. Hold them down until the Apple logo appears on the screen - about 10 seconds.

Then release the buttons.

Step 3. Wait 4-5 seconds and you will see the home screen of your mobile device.

On iPhone 7, instead of the “Home” button, you need to hold down the volume down key.

How to turn off iPhone if the sensor does not work?

If you just want to turn off the gadget rather than reboot it, you should proceed a little differently:

Step 1. Press " Home» + « Power».

Step 2. Hold the buttons for 4-5 seconds until the screen goes dark, then release them. Don't wait for the “bitten apple” to appear!

After this, you can turn on the smartphone in the usual way - by holding the “Power” button for 2-3 seconds.

A “hard reset” solves not only the problem with the sensor. TO Hard Reset also resorted to if the iPhone began to have poor network reception or consume too much energy.

Possible consequences of a reboot without using a sensor

If you apply Hard Reset once or twice, negative consequences definitely won't happen. If you constantly resort to a “hard reset”, there is a risk that the memory module will fail, as a result of which all data stored on the iPhone will be lost. There is a widespread opinion among users: every subsequent Hard Reset increases the likelihood that the memory will “sprinkle”. However, this has not been confirmed by experts.

You should resort to a “hard reboot” only as a last resort - when other methods to solve the problem have already been tried and have not brought any results.

Conclusion

A “hard reboot” is the simplest and fastest measure aimed at restoring the sensor’s functionality. But not the only one. If the user is afraid to produce Hard Reset, he can contact iTunes– the media harvester will restore the device, and along with the restoration, the gadget will reboot. There is an option for the most cautious users: wait until the smartphone is discharged and turns off itself, and then “start” it in the usual way.

Due to the fact that in the new iPhone X, Apple engineers decided to abandon the Home button, all actions on the smartphone are performed completely differently than on previous models.

If you just started using the iPhone 10 and are having difficulty turning off or restarting your smartphone, then in this article I will describe these processes in detail.

How to turn off/on iPhone 10?

iPhone 10 came out completely different from its predecessors, as it is the first Apple smartphone without a Home button.

Nevertheless, as the initial sales showed, the iPhone X was liked by many fans and the first batches were sold out instantly. I have no doubt that at first many people had slight difficulties in using it due to the lack of a Home button.

Turning on iPhone 10. In terms of inclusion, nothing has changed in iPhone 10. Just find the Power button on the right side and press it until the Apple logo appears.

The first time it will not be so fast, because the first turn on always takes some time. But then, this process will not take much time.

The process of turning off the device has changed completely. Now there are two ways to implement this action:

Method 1. Just come in “Settings” - “General”, scroll to the bottom of the screen and press the button Switch off.

Method 2. If you are too lazy to constantly go into settings, you can turn off iPhone 10 using the buttons. To do this, simultaneously hold down the Power button and any of the volume buttons.

Only after this the old slider appears (at the very top) and by swiping your finger, the device turns off.

These points can also be attributed to NORMAL RESET gadget when the device is not frozen, but just needs to be rebooted.

How to hard reset iPhone X?

Now let's deal with situations when your iPhone freezes and does not respond to any gestures. Considering all the glitches and shortcomings of iOS 11, such a need may arise often.

If previously, to perform a “hard” reboot, it was enough to simultaneously hold down the Home and Power buttons, but in the iPhone X everything is somewhat different.

To reboot the device:

Only after following the instructions correctly, the device can reboot and after a certain period of time, you will be able to see the Apple and iPhone X, which can again be used in normal mode.

I hope you won't have any problems rebooting your iPhone X or turning it off.

According to recently published documentation for the iPhone 8, iPhone 8 Plus and iPhone X, iPhone XS and iPhone XR, the procedure for forcing a reboot or hard restart has changed in newer device models.

In contact with

How to force reboot or hard restart (hard reset) iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max and iPhone XR

1. Press and quickly release the Volume Up button.

2. Press and quickly release the Volume Down button.

3. Press and hold the Side button until the Apple logo appears.

How to turn off iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max and iPhone XR without using buttons

To turn off the device, you need to press and hold the side button for a few seconds until the slider appears Turn off.

In addition, in iOS 11 and newer software versions, the option "Switch off" also appeared in the application "Settings"(at the very bottom of the section Basic).

How to reset iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max and iPhone XR to factory settings via “factory and content reset”

If you encounter difficulties booting the system, use the recovery procedure in iTunes on your computer.

Keep in mind that after performing a factory reset or restoring the software in iTunes, all data stored on the device will disappear, so use this method only if absolutely necessary. However, if you have backup files in iTunes or iCloud, you can easily restore them after restoring the software.

How to Activate Recovery Mode (iTunes Icon on Screen) on iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max and iPhone XR

1. Make sure you have the latest version of iTunes installed on your Windows PC or Mac (download).

2. Connect your iPhone to your computer and open iTunes.

3. After connecting your iPhone to your computer, force restart as described above.

Press and quickly release the Volume Up button, and then do the same with the Volume Down button.

Press and hold the Side button until the recovery screen appears (picture of the cable and iTunes logo).

A menu will appear in iTunes asking you to either restore or update your iPhone. Select "Update iPhone", and iTunes will try to reinstall iOS while preserving the data or "Restore" to reset settings to factory defaults (all data will be deleted). During the update or restore process, your iPhone may automatically restart several times. Don't panic - wait until the download finishes (usually 5-15 minutes).

Once the restore or update process is complete, set up your iPhone.

If you mistakenly enabled recovery mode instead of update mode, don't worry. Simply disconnect your iPhone from your computer and press the side button to restart. Recovery mode will be disabled without the need to restore or update your device.

Freezing is a problem that any computer equipment faces. At some point, one of the programs begins to behave incorrectly or conflicts with another program, and as a result, the entire device is inoperative. This is exactly the situation that is called freezing.

iPhone is also susceptible to this problem and may freeze from time to time. Typically, when an iPhone freezes, it refuses to turn off or restart, leaving the user confused. Most often, older models such as iPhone 4, 4s, 5, 5s and 6 freeze. But sometimes even iPhone 6s and 7 users experience freezes.

If you find yourself in such a situation, then this material should help you; here you will learn what to do if your iPhone is frozen.

iPhone frozen and won't turn off or restart

Usually, if the iPhone freezes, users try to turn it off or restart it using the standard procedure, namely by long pressing the Power/Lock button. Unfortunately, in most cases, when the iPhone freezes, this shutdown method does not work. The iPhone continues to work and run frozen applications no matter how long the user presses the power button.

But, the iPhone has an alternative shutdown method that bypasses the iOS operating system. Thanks to this, this shutdown method works even on completely frozen devices. The method is to simultaneously press the Power/Lock button.

Home and Power buttons

The “Home” and “Power” buttons must be pressed simultaneously and held until the frozen iPhone turns off. After turning off, you need to wait a few seconds and briefly press the power button once. After this, the iPhone will turn on and start working normally.

It should be noted that the “Home + Power” key combination is also responsible for taking a screenshot. But, to take a screenshot, you need to press these keys literally for 1 second; if you hold the keys longer, the freeze protection will work and the iPhone will reboot.

If you have an iPhone X or a newer model, then you need to use .

iPhone freezes when turned on

Pressing the Home + Power buttons simultaneously allows you to turn the device off and on in any situation. However, this procedure does not guarantee that the iPhone will not freeze again during the startup process.

If your iPhone freezes before the device fully boots up, then you can use a recovery mode called “Recovery Mode”. With its help, you can restore your iPhone to its original state and bring it back to life. But, you need to take into account that this procedure is equivalent to resetting to factory settings and leads to the deletion of all user data.

In order to enter Recovery Mode on your iPhone and perform a recovery, you need to do the following:

1. Turn off your iPhone and wait a couple of minutes for all programs to finish their work. If the iPhone does not turn off in the standard way, then you can resort to the “Home + Power” combination described above.
2. Next, you need to press the “Home” button and, without releasing it, connect the iPhone to the computer via a Lightning cable.
3. Once connected, continue to hold the Home button until the iTunes logo and cable image appear on your iPhone.
4. Now you need to release the Home button and launch iTunes on your computer.
5. In iTunes, you need to go to the iPhone settings and click on the “Restore iPhone” button.

Restore iPhone button

In this way, you can solve the problem with the iPhone freezing during startup, but, as already mentioned, for this you will need to sacrifice all user files. You can read more about Recovery Mode in our article.

Apple devices also have a so-called DFU or Device Firmware Update mode. If the recovery mode does not help, then you can try and try the recovery again.

Fifth iPhones often experience malfunctions due to incorrect installation of the program, careless handling by users, or other justified reasons. At the same time, the iPhone 5 may react poorly to button presses, periodically freeze, suddenly turn off or not turn on at all, execute commands that are not given, in general, the list of problems can be long.

As a rule, to get rid of the current error, the very first solution is to restart the iPhone 5S or iPhone 5. When performing the restart process, the iPhone resets old tasks and updates the execution of all applications or programs available on the smartphone.

There are several types of rebooting the iPhone 5. Some are tougher, others are softer, with or without using a computer and programs. First, let's look at a simple restart option that is quite fast.

The algorithm of actions is as follows. First, hold down the Power button and hold it for up to five seconds until a red button appears on the screen, indicating it is turned off. After that, without lifting your finger, swipe from left to right on this button. As soon as the display goes off, press the “Power” key again and hold it until the “Apple” icon appears on the iPhone screen and the smartphone starts to reboot again.

Hard Boot Mode

If your iPhone 5 or 6 seems to “freeze” and does not respond when you press the sensor buttons, then you need to reboot the smartphone as follows. Press and hold the “Power” key and the “Home” key on the front panel together for 10 seconds until the Apple logo appears to reset a suspended task or download. In this case, all unsaved information will disappear, and everything will be fine with the rest of the information. Use this method only as a last resort, so don’t use it too often.

Reboot mode via Assistive Touch

When the mechanical buttons on the iPhone 5 do not perform their functions when pressed, but the sensor works, you can perform the following reboot mode through the iPhone settings menu using the “Assistive Touch” touch input option.

To do this, open the “Settings” menu of your iPhone and select the “General” section, in which open the “Universal Access” subsection. Scroll through the dialog box, and at the end of it, find the “Assistive Touch” option.

Activate this feature by dragging the activity slider to the left. In this case, a translucent round button should appear on the smartphone screen. Click on it, and in the options menu that opens, find the “Device” item and hold it down. Next, click on the “Screen Lock” item, and then the “Turn Off” button, moving its position to the right side. Your iPhone 5 will turn off.

After a while, press the “Power” button again, it should work like the other mechanical buttons. If it doesn't work, then connect your iPhone 5 to your computer via USB cable to start your apple device.

Please note that mechanical buttons on an iPhone may not work for another reason: due to their sticking, cable disconnection, breakage of the button itself, and other reasons. Therefore, it is not always possible to fix their operation by rebooting the smartphone.