My wife became the owner of an iPhone 5. Everything was fine until it accidentally fell off the table onto the floor. Outwardly, he was not damaged, and even turned on, but she was happy early, since the home button stopped working after the fall. If you have a similar story, don’t be upset, restoring the functionality of this button may be within your power. So…

At the beginning, I started surfing hoping that it would be very easy to cure the home button, but the entire Internet is full of advice to change the entire button or just a button without a cable. There was also advice to check the cable, which could come unfastened.

Not knowing why I bought a home button with a cable and a set of screwdrivers to disassemble it. The phone was under warranty, but I was sorry for the time spent searching for service and waiting for repairs with an unknown diagnosis. It was decided to dissect the patient in order to see for himself what happened there.

Here is the same set of screwdrivers for 50 rubles that I bought at the siriust.ru store. Probably only the Chinese are cheaper. By the way, you can order a button from them for a couple of bucks, and not only black and white, but also other colors.

As for parsing. To do this, you need to unscrew just two tiny screws from the bottom of your poor iPhone. The screws themselves have the shape of a 5-pointed star measuring 3.6 mm. It is quite possible that you already have them in your screwdriver set and then you won’t have to buy anything at all.

After you feel like a watchmaker, unscrewing the screws, you should take any suction cup that you can pull on. Suck it a little closer to the home button. I found one from a DVR. Having suctioned to the glass, begin to gently and slowly pull on the suction cup. I didn't make any significant efforts. Everything turned out quite easily. Please note that at the top of the iPhone there are cables connecting the glass-touchscreen and the body. There is no need to pull anything out there.

Here is the home button that we need to bring back to life after our iPhone 5 crashed.

Looking at my device and seeing the same picture, I realized that everything was sitting firmly and no fall could damage either the button or the cable. But then what's the matter? Notice the two yellowish round heels. On the opposite side of the glass you will see the following picture:

Do you see two bright yellow plates? These contacts short out your home button when pressed. You can try to carefully short-circuit them with a screwdriver while the iPhone is turned on and make sure that the screen reacts to pressure. I think you already understand what you need to do to fix the home button on your fifth iPhone yourself after a fall. I slightly bent these tendrils slightly larger from the body, connected the glass back to the body and made sure that the button worked! Don't forget to tighten the screws.

By the way, at that time, if you decide what to do with the phone, you can easily display the virtual Home button on the screen by activating the menu item in the settings in special features.

PS: I am not responsible if you do something wrong and something breaks. Well that's it, just in case

PPS: pictures and videos of iPhone analysis

Looking for a reliable Apple service center?

90 days
repair guarantee Free diagnostics
devices Repair price
Will not change

Network of services
near the subway On-site repairs
in 25 minutes 100% high quality,
new parts

The main reasons for the incorrect operation of the Home button

Apple products are characterized by reliability and quality. But even such high-quality products can break. And the “Home” button, which means “home” is no exception. This button functions to return you to the main screen from any page you are viewing.

Why does the home button stop working or work poorly? The reasons for such malfunctions can be different: from careless handling of the iPhone to factory defects (which happens extremely rarely).

How much does it cost to repair a smartphone if the iPhone 5s Home button does not work?

What causes the iPhone 5s Home button to not work?

Most often, breakdown occurs due to the following factors:

1. Liquid gets on the button. A couple of drops of water are enough to disrupt the operation of the button; you could simply press the key with wet hands, as a result of which the moisture that got through the microscopic gaps started the corrosion process. After moisture gets in, the button may not respond to pressing at all, or may freeze.

2. Mechanical damage. Usually appear as a result of a shock or fall of the device. The button may become difficult to press or may not work the first time.

Also, the reason why the Home button on the iPhone 5s does not work may be a software glitch.

Self-recovery method

If a software failure occurs, you can try to fix the gadget yourself.

The method for restoring button sensitivity is as follows: after launching any iOS application, press the “Power” button and hold it until the power off slider appears, then press the “Home” button and hold it until the slider disappears. This will reboot the iPhone. If this method does not help, then the malfunction is of a technical nature and then you need to contact a service center.

Bringing the Home button to the screen

Apple developers have foreseen the possibility of failure of the return Home button, and have come up with a way to display this key on the display if the Home button of the iPhone 5s does not work

In order for this very popular and necessary button to appear on the display, you need to go to the “Settings” section. Then we go to the “Basic” function, then “universal access”. We look for the “AssistiveTouch” section. Once activated, a virtual button appears.

This function can temporarily replace a mechanical button, but only if the smartphone is in full working order. Unfortunately, this operation cannot be performed if there are problems with the touchscreen. You can find out prices on our website.

Why you shouldn't change the Home button yourself

If the problem is not a software glitch, then you will have to replace the button to restore functionality. iPhone 5s Home button not working? - There is a lot of information on the Internet on how to repair this button yourself.

The “Home” button on a smartphone not only has the function of returning to the main screen, but also serves as a fingerprint scanner for the owner of the gadget. If you replace the button yourself, this function is lost.

The right decision would be to entrust the repair of your device to the reliable and experienced hands of specialists, and rest assured that all work will be carried out properly and in a short time.

Contact the professionals

Trust InApple to repair your iPhone! Our specialists will conduct a full diagnostic of the device, identify the cause of the breakdown and eliminate it in the most accessible and least expensive (if possible) way. We purchase all components for iPhone repair only from official manufacturers. Be sure that after repair at InApple, your gadget will be in shape again.

IPhone 5s buttons do not work. What to do?

When using the iPhone 5S, users often encounter problems with the Home and Power keys. In most cases, the problem can only be solved by replacing the button mechanism. Let's take a closer look at how to carry out the repair yourself, having all the necessary parts.

Causes of failure

The Home and Power keys are used very often, which is why they are most susceptible to various breakdowns. Common reasons why the button does not work on the iPhone 5S:

• dust or moisture getting inside the button;
• mechanism failure. In this case, the keys may periodically stick or not be pressed at all;
• membrane disruption;
• cable malfunction. Due to moisture ingress, the plume may oxidize. Also, contacts may be broken due to the impact.

We disassemble the phone

At this stage, it is necessary to perform a number of standard steps to disassemble the iPhone case. All the steps described below must be completed, regardless of which key you change.

Turn off your phone; it should not be connected to a charger or computer. Take a screwdriver and unscrew the two screws at the very bottom of the phone case, they are shown in the picture:

Using a suction cup, carefully pry up the front of the phone case. Next, take a spudger and pry the edges of the display away from the main body.

Open the case, but do not completely detach the display from the main part. Place both elements at a 90 degree angle as shown in the picture and continue working.

Using a screwdriver, unscrew the screws circled in the picture and remove the protective panel.

Take a spatula and use it to pry and remove the cables for the front camera, display and sensor.

Only after disconnecting the three cables can the display be removed.

Now you can start replacing individual parts of your smartphone.

Replacing the Home key

If the Home button of the iPhone 5S does not work, you can replace it yourself. The repair process does not require any special skills. All you need is new parts and following step-by-step instructions. To replace the Home button, you first need to remove two screws that are located at the bottom of the inside of the display module.

Remove the protective bracket, thus freeing the Home button. Take out the button.

Now replace the old part with a new one, reassemble the device, following all the steps of the described instructions in reverse order. Turn on the phone and test the key operation. In case of poor responsiveness, disassemble the phone again and check the quality of the connection of all cables.

Replacing the Power button

Disassemble the phone following the steps indicated in the first instructions of the article. After you have disconnected the display module from the phone body, remove the 2 bolts shown in the picture below. They hold the battery protection panel in place.

Now you need to carefully remove the phone battery protection panel:

Take a spudger and pry up the battery panel piece. This action must be performed very carefully so as not to catch the motherboard with the spatula.

Using a spatula, remove the device's battery.

Using tweezers, pry up the antenna cable.

Remove the bracket by first unscrewing its bolts.

Now disconnect the volume up/down button cable and all two antenna cables.

Inside the case, unscrew and remove these two bolts:

Remove the panel that covers the charging port.

Using tweezers, disconnect the charging socket cable. This is necessary in order not to damage the phone's electronics.

Remove the SIM card holder from the smartphone along with the card itself.

Using a screwdriver, unscrew all the bolts circled in the picture:

Without removing the phone's motherboard, turn it on its side towards the battery area.

Disconnect all cables that secure the board to the case and remove it completely. Use tweezers to move away part of the Power button as shown below. Set the item aside.

Remove the screw that secures the protective panel to the Power key.

Disconnect and remove the bracket that is located between the flash and the rear camera of the device. Now move aside the protective panel of the Power key and remove the button mechanism. Replace it and put the phone back together.

On the list of common iPhone problems, the Power or Home buttons not working are high on the list. Many users encounter this. In most cases, the device must be sent in for repair, but sometimes the problem can be solved on your own. It is important to know why the button does not work on the iPhone and what to do in such situations.

The Power key malfunctions for many reasons:

• Damage to the phone - falling, contamination, water ingress, other types of mechanical impact.
• Problems with the cable.
• Recession after strong pressure.
• Errors in the operating system.

It is possible to use the phone with the Power key inactive, despite the great inconvenience. There are several simple ways to turn on or turn off your iPhone in such conditions:

1. You can turn on the phone by connecting the gadget with a USB cable to a power outlet or PC;
2. You can turn off the device using the Assistive Touch function, through the “Device” menu, select “Screen lock”, where the “Shutdown” function is located.

In the new version of iOS, the shutdown function has been added to the settings menu. All these are temporary measures; correct operation of the device is impossible without functioning Power and Home keys.

In most cases, a malfunction requires contacting a service center, but sometimes you can try to fix the bug yourself. The method of repairing a broken module depends on the nature of the damage or the nature of the software error.

Mechanical damage

One of the most common reasons why the lock does not work is mechanical. Strong pressure, falling, contamination - all this can cause failure. In addition, there is always the possibility of a banal jam. For Apple smartphones, especially older versions, a problem with the functionality of the keys may be due to the frame falling off.

It is easy to notice - this is indicated by the gap between the case and the back cover. Parts of the device tend to simply wear out over time, especially those that are loaded. Therefore, the best decision is to contact a service center. The cable or pad will probably need to be replaced.

System problems

Failures in the phone software can also cause incorrect operation. If the key “sticks” and responds slowly to pressing, this is most likely the case. The defect may appear constantly or from time to time, disappearing without outside intervention.

Sometimes problems with the OS can be resolved with a simple reboot. The system is probably overloaded with temporary files and open applications, a reboot resets them, freeing up memory space.

Water ingress

For the device to stop working correctly, it is not necessary to drop the gadget into a filled bathtub. It can easily fail after a walk in the rain or after using the gadget with wet hands. This is due to the oxidation process that occurs in the contacts after even a small portion of liquid enters. In this case, the surest option is to contact a service center, however, there is a simple method that you can try at home.

Cleaning the contact pad and lubricating the mechanism

If the problems are caused by contamination of the cable or oxidation of the contacts, there is an option to clean it. This is done either with alcohol or with the anti-corrosion agent WD-40.

First, you need to turn off the device. Then you need to take a cotton pad and soak it with the solution. The cotton pad should be pressed to the problem area and pressed several times so that the substance penetrates deeper, to the contacts. After the alcohol or lubricant has dried, you can check the result.

Home button repair methods

If Home works intermittently, slows down and does not always respond to user actions, it most often requires repairs at a service center. Let’s assume that there is no time for this; we need to bring the device back to life now. There are several simple and effective ways you can try:

• Calibration
• Correction of the position of the standard connector.
• Cleaning the contact pad and lubricating it if there is mechanical contamination.

It's not as difficult as it looks. The Internet is full of “instructions for dummies”; the main thing is to follow them and perform manipulations with caution so as not to aggravate the situation. At the bottom of the article there is a video with instructions, be sure to read it.

Home Button Calibration

Calibrating Home on iPhone is an effective method of “treatment” if the cause of the malfunction is software glitches. It is done through a simple algorithm:

• You need to activate any application on the gadget.
• Then you need to hold down Power until the shutdown window appears.
• Next, you should release Power and press the Home key, after which the shutdown window should disappear.

With a high probability, the device will return to its previous operating mode. Apple devices are prone to small system bugs that are fairly easy to fix.

Correcting the position of the standard connector

In case of breakdown, another simple method can help. Sometimes, in order to return the key to functionality, it is enough to simply adjust the position of the connector.

This is done simply. You need to connect the phone to the “native” USB cable and lightly press on the bottom of the plug. It is important to do this carefully, as too much pressure can cause the port to break. After this, you can check whether “Home” is working in the iPhone.

If this doesn't help, you can try another method.

Duplicating the Home button at the software level

If the above methods do not help, the breakdown can only be fixed at a service center; only replacing the entire module will help. Until this point, duplicating the key at the software level will help make the user’s life much easier.

To do this, go to “Settings”, select the “General” menu and then “Universal Access”. After this, the Assistive Touch function is needed. A small menu will then appear on the touch screen, which will temporarily replace the “Home” function and more.

Old versions of iOS may experience errors after repair. Users all over the world were faced with a situation where, after replacing the Home key tied to Touch ID, the phone locked. This error has been fixed in the new version of the OS. Accordingly, a simple firmware update will help in this case.

Conclusion

Problems with the Home and Power keys are very common and can significantly complicate the user’s life. If turning on or off your smartphone is problematic, this is a reason to contact a service center. As a rule, repairing such defects is not very expensive. You can try to “cure” the bug yourself, but only a specialist can accurately say why the iPhone does not respond to buttons and offer effective troubleshooting methods.

Video

In the modern world, when choosing a mobile phone, a person relies primarily on the quality, durability and modernity of the smartphone. Apple gadgets fully possess all these qualities, which, of course, have already attracted the attention of the public. Currently, the prevailing opinion in society is that iPhones are some of the highest quality phones. However, even the highest quality equipment tends to break down and become glitchy over time.
Some owners of an Apple gadget may have already encountered one of the typical smartphone problems: the home button does not work. On iPhone 6 and earlier models, this problem occurs quite often. Let’s figure out what to do if the Home button on the iPhone doesn’t work, starts to stick, wobble, make uncharacteristic clicks, etc. Initially, you should not immediately rush to hand over your smartphone to a service center.

There are several ways to revive the Home button at home.

What kind of breakdowns happen? Home button doesn't work

iPhone 5s and other models of Apple gadgets are constantly exposed to the environment, which is why over time the Home button can fail; this is the complaint that very often owners of Apple gadgets contact the service center with. In general, breakdowns can be divided into several types:

• software, they are much easier to eliminate, calibrating the Home button mainly helps;
• mechanical, these problems occur when moisture gets on the button, the mechanism is contaminated with dust, or after the phone is dropped or hit;
• failure of any part is a defect, which is a rare occurrence.

If, as a result of software problems, the Home button on the iPhone 5s and other models stops working, it is most likely that third-party software and applications were installed on the device, or an error was made during the installation of the software. The Home button itself is a very fragile part of the iPhone, so after the smartphone falls or receives a strong blow, the button may become damaged.

It is also possible that the home button on iPhone 6 and earlier models does not work due to moisture. If we consider this situation, then when you press you can hear a characteristic creak, which indicates that the contacts have oxidized.

How to check the functionality of the button? Home button doesn't work well

On the iPhone 5s and other models, experts have proposed a way to check the functionality of the key. To be sure that your iOS device requires repair, press Home about 10 times. If you notice a lack of response to a couple of presses, this already indicates a problem.

Self-repair of the Home button

Let's assume that the home button on the iPhone 5s and other models does not work. What will be our actions? First, let's look at software glitches when using an iOS device. For one of the reasons, the Home button on the iPhone 5s does not work due to the system update to iOS 10. After this update, the standard is a double press, which many Apple users are not used to, which makes using the smartphone less comfortable. This problem can be solved in two ways:

• try to get used to the fact that in the updated version you need to press the key twice;
• go to the main settings of the phone - “Universal access” - “Home” - “Place finger”.

Home Button Calibration

Many Apple people have noticed that when the home button on the iPhone 5s does not work, calibration copes with this problem. To carry out this procedure, enable any application.

While the application is running, hold down the button responsible for turning off the phone until the window to turn off the device appears. After this window appears, press and hold the Home button for about 10 seconds. After this time, the application will automatically close and the button will be calibrated by the system.

Solving the problem using a USB cable

Home button not working on iPhone 4s and iPhone 4? Surely many owners of this version of Apple smartphones have encountered this problem when the button on the iPhone does not work, although there were no “errors” in the operation of the phone. In this case, you can try a trick that is very popular on the Internet. To do this, you only need a 30-pin connector.

• First, connect the connector to the iPhone;
• Place your finger under the connector and press slightly from bottom to top;
• Try pressing the Home button. If the button still does not respond, do not increase the pressing force, otherwise this may result in the socket breaking.

Cleaning the Home Button with WD-40

Very often the home button on iPhone 5 and earlier models does not work for a simple reason - contamination. In this case, WD-40 aerosol, which we often use for household purposes, will come to our aid; isopropyl alcohol can also help cope with this problem.

It should be remembered that it is necessary to apply the product to the button itself in order to avoid the occurrence of new problems. After you have applied the product, press the button several times so that the product can penetrate inside and relieve you of the cause of the button’s inoperability.

What to do if nothing helps?

In most cases, the above methods for rehabilitating the Home button help solve this problem for owners of Apple gadgets, up to the iPhone 4s. The home button does not work for a number of other reasons, such as, for example, a strong external influence due to which the device has lost its functionality. In this case, you need to take the iPhone to a service center, or display the Home button on the screen, which sometimes causes discomfort, so sooner or later we still advise you to contact a qualified technician.

Bringing the Home button to the screen

If the home button does not work, iPhone 5 and other models provide such a function as placing the Home button on the screen, which, of course, will be a temporary measure until the device gets into the hands of a specialist. So, let's look at how to configure this key:

• Go to your phone settings;