When creating multi-page documents in text editor A number of Word users may be faced with the need to present a number of document pages in portrait orientation, and another row in landscape orientation (especially if this concerns materials that include various charts, graphs, and so on). In this case, an attempt to change the orientation of the desired page completely changes the orientation of all pages in the document, which is not at all necessary for the user. In this article I will tell you how to make one page portrait and another landscape in Word, and what methods exist for this.

How to make one page portrait and another landscape in Word - methods

If you need to create one portrait page in Word and another landscape page, then I recommend using a number of methods, which I will outline below. At the same time, I note that these methods work with versions of MS Word 2007 and higher, and if someone has older versions of a text editor, then I recommend abandoning the mastodon programs and installing a more modern version of MS Word. So, let's move on to listing the necessary tools.

Method 1. Select the desired text

So how to make landscape orientation on one page in Word? If you have several pages of a document in portrait format, but you want to present some text from that document in landscape format, then follow these steps:

The required text will be transferred to a separate page in landscape format, and you will receive a visual example of how to make one page portrait and another landscape in Word. If you need to reduce the font on your computer, the instructions have been described by me.

Method 2. Page markup

An alternative to the first method is page-by-page markup of the document you need. So, if you were unable to make one page landscape and the other portrait in Word using the first method, then do the following.

Let's say you have five pages of text in book layout, and you need to make the second and fourth sheets in landscape format. Proceed as follows:

Starting from the second page, all pages became landscape.

1. Now we need to make the third page a book page in Word. Place the cursor on the upper left edge of the third page, again enter the page settings, but there select “Landscape” and “To the end of the document”.
2. The third and subsequent pages will become landscape. Now we go again to the fourth page and use the same algorithm to make it book-ready.
3. Then we move to the fifth and make it landscape. I think the essence of the actions is clear to the reader.
4. As a result, we get this result.

How to make one page landscape in a Word document and another portrait page [video]

You can see how these methods visually look in the video below.

The methods I have listed will help the reader answer the question “How to make one page portrait and the other landscape in Word.” In most cases, the first method is sufficient, which effectively places the text you need on the page in the orientation you need. If you want to mark up your document in advance, then create the required number of pages in advance (Insert tab - Blank page), and then use method No. 2, and your idea will be effectively implemented.

In contact with

The orientation of pages in an MS Word document can be portrait or landscape. Most often, when formatting text, use portrait orientation for pages. But it also happens that a drawing, graph or inscription in large font does not fit on the page in width. In this case, you can make one or several landscape pages in Word. I will talk about this in this article.

How to make all pages in landscape orientation in Word

This is the simplest question. Open required document, then go to the tab "Page layout". In chapter "Page settings" Click on the “Orientation” button and select the appropriate item from the menu. After this, all pages of the document will become landscape orientation.

How to make landscape orientation for several pages in Word

Now imagine that you have several pages in a Word document for which you need to set the orientation to landscape. All other pages should remain in portrait orientation.

To do this, select all the text on the right pages, go to the tab "Page layout" and in the section "Page settings" click on the small arrow in the lower right corner.

A dialog box will open. In it, in the “Orientation” section, put “Landscape”. Then, in the Apply field, select "to selected text" and click "OK".

Selected pages became landscape orientation, while all others remained portrait.

There is another way to make several landscape pages in MS Word. To do this, put italics at the beginning of the text, on the page from which the landscape ones begin, go to the tab "Page layout", click on the “Breaks” button and select from the drop-down list "Next page".

Now place italics at the beginning of the page where the portrait pages begin again, and repeat all the steps. When non-printing characters are enabled, the following message will be displayed: "Section break (from next page)".

Put italics on one of the pages that will be landscape, go to the tab "Page Layout" and in the section "Page settings" click on the arrow. In the next window, select landscape orientation, and in the "Apply" field select "to current section". Click OK.

All pages that were in the current section became landscape orientation.

How to make one landscape sheet in Word

If you need to make one landscape page in Word, then you can use the methods described in the previous paragraph. Only apply them to one page.

Now you can easily create book or landscape pages in your document. Moreover, you can change the orientation for both several and one page.

Rate this article:

Quite often, when working with text in a program Microsoft Word, there is a need to rotate the sheet horizontally. And how to rotate a sheet in Word? Let's figure it out.

In Microsoft Word, there are two types of sheet layout - vertical and horizontal. The vertical arrangement of the sheet is called a book spread, the horizontal one is called a landscape spread.

The default page orientation in Word is portrait. However, when you are working with charts for example, or when you are creating something like a leaflet, you may need to rotate the sheet 90 degrees, i.e. switch to album sheet.

Luckily, Word makes it easy to switch to landscape mode.

If you are using Word 2003, then select the menu item File -> Page settings.

Then in the dialog box Page settings select tab Fields.

Under the heading Orientation click Landscape. A blue outline should appear inside the edge of the window with a picture of a leaf in a horizontal position.

If you want all sheets in your document to be in landscape orientation, then simply click the OK button at the bottom of the dialog box. If you want to apply changes only from the current sheet and to all the following, then select the option until the end of the document Apply In chapter Sample, and then click OK.

In addition, you can make any pages in the middle of the document landscape. Simply highlight the pages you need before opening the " Page settings" And then, following the instructions described above, select the option to selected text in the drop-down list called Apply.

Landscape sheet in Word 2007, 2010

In newer versions Word programs(2007, 2010) changing the orientation of the sheet is even easier. Go to the tab Page layout main menu, in the command group Page settings select Orientation -> Landscape. All pages of the document will change orientation.

If you need to rotate only one or several selected pages, click on the button in the lower right corner of the command group Page settings.

Not always Word document should be completely the same. In particular, different fonts, sizes, etc. can be set on different pages; in addition, it is possible to use both landscape and book pages. In one of the previously written materials, I already talked about how to make one page book-like in this text editor. As you understand, now it’s time to talk about the exact opposite process: how to make one page landscape in Word. In principle, these actions are very similar to each other, but still there are some differences.

If the document has one page

It is very easy to make one page landscape when the document contains no other pages besides it. In this case, you only need to perform a few clicks. The first is to go to the "Page Layout" section. From there, go to the “Page Settings” block, where there is an “Orientation” button. After clicking on it, two lines with the inscriptions “Portrait” and “Landscape” appear in front of you. It’s clear that you select the second line, and the page takes on a horizontal view.

If the document has many pages

If the document has many pages, but you need to make only one or several pages landscape, the above method is not suitable for you. The fact is that by using it, you will make all pages of the document landscape, and you do not need this. What to do? Follow my recommendations:

If your document has more than two pages, perform all actions by analogy. That is, first you make the entire document horizontal, after which those pages that should be in portrait orientation are manually returned to their original appearance.

I admit, it sounds a little confusing, but, in fact, the whole process does not take much time, all actions are performed quickly and simply. - one of the simple office programs. Try working in it!

Video to help

By default, the page view is set to vertical, also called portrait view. For most text documents, instructions and even books, it is most suitable.

However, there are situations when a horizontal sheet is more convenient. For example, when inserting large graphs, photographs, and other wide visual objects. In this case, the pages need to be “upside down.”

By the way, what type of sheets in a document - portrait or landscape - is called page orientation.

How to make all pages of a document landscape

1 . At the top of the program, go to the “Page Layout” or “Layout” tab and find the “Orientation” button.

2. Click on it and select the “Landscape” option.

Now all sheets in the document will be horizontal. If you need to make them vertical again, we do the same thing, but instead of landscape orientation, choose portrait.

How to make only one (several) pages landscape

It often happens that you need to turn not all the pages, but only one. Well, or several. For example, in a term paper, where the main part of the document is text, but several sheets are allocated for images and graphs. Then it is much more convenient if they are horizontal.

1 . Place the cursor on the page that you want to make landscape. To do this, simply click on it so that the wand blinks.

2. Go to the “Page Layout” tab at the top of the program and click on the small arrow in the “Page Options” line (on the right).

In Word 2016, this is done a little differently: go to the “Layout” tab, select the “Margins” element and look at the bottom for the “Custom Margins” line. In earlier versions of Word: File → Page Options.

3. In the window that appears (in the “Fields” tab), in the “Orientation” section, click on “Landscape”.

4 . Then at the bottom of the window, in the “Apply” section, select “to the end of the document” from the list and click “OK”.

Now this page and everything after it will be in landscape orientation. If you need the document to have only one upside-down sheet or a couple, then do the same, but in reverse:

• Place the blinking cursor on the sheet that should be portrait (just click on it).
• In the Page Layout tab, click on the small arrow next to Page Setup.
• In the window, select the orientation “Portrait” and select “to the end of the document” at the bottom.

The page will “turn” back, but the previously made landscape sheet(s) will remain. Now all subsequent pages will be book pages.