The cost of repairing a phone or tablet after water gets into it varies.

It all depends on the damage. Only diagnostics can determine the exact price.

Even the approximate price is determined by the actual breakdown, although in this post I will try to indicate as accurately as possible the cost of repairing a phone that fell into water.

NOTE: the price also depends on the place where you go and sometimes the difference reaches thirty percent - verified

Approximate cost of repairing a phone after water damage

Typically the price ranges from $10 to $80. Of course there are exceptions, but there is one more point.

If you don’t take action right away, repairs may no longer help - checked.

NOTE: maximum oxidation does not occur immediately, so the smartphone may work for some time - death may occur later.

Also, the cost of resuscitation after falling into the water depends on the model. After all, there is no need to prove that expensive phones use more expensive components.

Most often, repairs are required: keyboard, speaker, microphone, screen, sensors and charging.

A critical situation is the oxidation of radioelements. Recovery is then not always possible.

Also, sometimes repairs are unprofitable and pointless, and diagnostics performed in some workshops are paid, while others are free. However, the price is small, somewhere around 0.5 - 1 dollar.

Phone firmware price

NOTE: the price practically does not depend on the name of the phone, for example, Lenovo, Samsung Galaxy, Huawei, HTC, Asus, LG, Nokia, but only on their category.

When flooded, sometimes you have to change the device.

For example, flash memory was damaged, the cost of which is about $40 (depending on the category of the device)

The price of the firmware ranges from 5 to 10 dollars, it also depends on the category and possibly the version.

Cost of simple repairs

Simple repairs aren't expensive, but you'll have to shell out $5 to $10. This could be, for example, cleaning from dirt.

After all, the phone does not always fall into the bath, where the water is clean. It may fall into a puddle where there is a solid mule at the bottom.

Corrosion cleaning cost

But they will tell you this only after inspection - there is different types of corrosion, and if it’s covered motherboard, then most likely they will give you the device and say goodbye.

For example, replacing a microcircuit can cost up to $40, and repairing broken conductors can also cost that much.

Again, a lot depends on the category, and it is as follows:

• The first category includes devices under $50.
• In the second category up to $100
• In the third category from 100 dollars

That's it. As mentioned above, these are only approximate repair prices. Good luck.

Today, gadgets have become an integral part of the life of any person. Any purchase of a new smartphone makes us feel joy and happiness, and when the smartphone accidentally falls into water, beer or other liquid, we begin to panic and worry.

In today's article we will tell you what to do if your phone falls into water and what steps to take.

As you know, in most cases the phone can be saved, and the liquid environment has a significant influence on this. For example, if a phone is dropped into water with high alkalinity, the chances of success are minimal.

The best chance of successfully resuscitating a phone is when it falls into running water.

What to do if your phone falls into water Samsung, LG, Lenovo, Xiaomi, Meizu, iPhone, Sony, ZTE, Asus, Android?

So, let's look at how to save a phone that has fallen into water. First, if your touch phone falls into water, turn it off immediately. After turning off the phone, remove the battery, memory card and SIM card. This step will also prevent short circuit phone. If your phone comes with a non-removable battery, turn it off using the on/off button.

Figure 1. If your touch phone falls into water, remove the battery as quickly as possible.

These were the first steps to take if your touchscreen phone fell into water. Now you need to dry all the accessories and the smartphone; we will talk about ways to dry a smartphone below.

How to dry a touchscreen phone that has fallen into water?

It's worth noting that you should not use your phone, headphones, or your phone's USB port until all components are completely dry.

Below we will give ways to dry a phone that has fallen into water, beer or other liquid.

Method 1. How to dry a touch phone in rice if it fell into water or got water in it?

To dry the outside of your phone, you can use a paper towel or soft cotton cloth.

Figure 1: A paper or alcohol wipe works great for absorbing water in tight areas of the phone.

You can use dry rice to dry the inside of your phone. Take a medium sized bag, fill it with rice and put your phone in it. It is very important that the rice completely envelops the phone

Figure 2. Dry risk perfectly absorbs moisture, which will allow you to rid your smartphone of water in a matter of days.

Method 2. How to dry a touchscreen phone in silica gel if it fell into water or got water in it?

Besides rice, you can use silica gel to dry your phone. Silica gel bags are used in shoe boxes.

Figure 2. You can find silica gel packets in a shoe box.

Method 3. How to dry a touchscreen phone on a battery if it has fallen into water or water has gotten into it?

Many people will ask, is it possible to dry a phone on a battery? Definitely yes.

This is perhaps the easiest way to dry your phone, but still risky. For example, if you simply put all the phone's components on top of the battery, the battery may swell and need to be replaced. Thus, the telephone and battery It is best to wrap it in a towel or thick cloth.

Method 4. How to dry a touchscreen phone with a hairdryer if it has fallen into water or water has gotten into it?

Never try to dry your phone with a hairdryer. The reason for this is that the hair dryer blows hot air, which causes the circuits in the phone circuit board to melt.

Figure 1. If you do decide to dry your phone with a hair dryer, be very careful and keep the hair dryer at a distance of 30 cm.

How long should you dry your phone after falling into water?

In most cases, owners who drowned their phone note that their device worked properly after 3-7 days. Again, you need to consider how your phone fell into the water and how long it was there.

FAQ

What should you do if your phone falls into water and no longer charges or the battery does not work?

Surely you have noticed that after the phone fell into the water, it stopped charging or sometimes a notification appears that headphones were connected to the phone. This problem usually disappears after drying the phone for a long time.

Of course, we cannot deny the possibility that the connector for charging the phone has become unusable. But before you contact service center When repairing smartphones, your best bet is to thoroughly dry your smartphone and try to charge it again.

Figure 1. If after a long and thorough drying of the phone it does not charge, then the problem may only be in the USB cable or charging connector.

Why doesn't the screen or sensor of a phone that fell into water turn on?

After the phone falls into the water, touch screen may not respond to your touch for a long time. The reason is that the sensor has many layers, and liquid got into one of them. In this case, you need to place the smartphone in a glove or wrap it in a scarf, and then place it on the battery. If the problem is not resolved within 2 weeks, then your only option is to contact the service center.

The phone, remote control fell into the water, or simply got very wet due to other circumstances - the situation is quite common.

What to do in this case? Recently I had to read advice on what to do if your phone falls into water. It was advised to simply shake it well and dry it in a warm place in the sun on a radiator, etc.

The advice is generally correct - But... I thought it was necessary to supplement these tips with extremely important comments.

First thing to do

It is necessary to remove the batteries from the remote control or the battery in the case of a telephone. If it is removable, of course. It would not be a bad idea to also remove SIM cards and memory cards from your phone. Why is it important?

The fact is that if moisture gets in between conductors made of different metals, electronic devices a lot, electrolysis occurs, and with a connected power source this process is accelerated many times over.

Therefore, the conductor paths on the device board and small elements will simply dissolve, leaving behind something similar to dust. So, don’t let your phone “dissolve”; remove the battery from it as quickly as possible.

And now, when the power source is turned off, we shake it off and dry it.

Second, do not rush when drying

If your phone gets very wet, or is completely submerged in water, then all the moisture will evaporate from it for quite some time. You will have to dry it for at least a day, and preferably longer. It would be correct to disassemble the device as much as possible, ideally to get the board out, if you can’t, then at least remove the case and battery cover when drying, and of course we do not install the battery itself until it is completely dry.

If you were able to get the board, feel free to dry it under an incandescent lamp or in the sun, LED bulbs They won't help here; they don't heat up. But if you dry the phone entirely, avoid excessive temperatures: direct sun, very hot radiators, etc. otherwise the glass on the phone may fall off. Or worse, the body becomes deformed.

Summer sun can heat up the plastic casing of devices so much, especially if the plastic is black, that some types of plastic begin to warp and deform from the heat. The rule here is that longer is better than hotter. It can also be a good method to completely immerse the device in dry rice and stir it from time to time, the rice will absorb moisture.

And finally, if your phone is expensive and you don’t want to part with it forever, I recommend that after drying, even if the device is working properly, you take it to someone who repairs phones. This is important so that your drowned person is examined by a specialist and, if necessary, cleaned ultrasonic bath.

Because even timely measures taken, in case of serious flooding, do not guarantee that the oxidation process has not begun and moisture has not remained under the microcircuits. In addition, even evaporated moisture leaves behind salts, unless you drowned your phone in distilled water, which is unlikely. And if this oxidation process has begun, then performance is a matter of time.

But only complete disassembly and cleaning in an ultrasonic bath can definitely save your gadget.

With remote controls remote control It’s simpler, you can disassemble it yourself and dry it as needed. I plan to write some notes in the future, so read it if you are interested.

What to do if your phone falls into water? This is not such a simple question as it might seem at first glance. Especially if the phone is touch-sensitive. After all, such a situation can happen in the life of any person. No matter how confident a person is in his careful and careful attitude towards the telephone, no one is immune from an emergency.

What to do if your phone falls into water, and for what reasons could this happen?

Firstly, it can simply get wet from the rain. But that’s what cases and other accessories are made for. But they don't always save. The phone may fall into a river or lake while on vacation, it may be accidentally forgotten in your pants and shoved into washing machine. It can also be accidentally dropped into a bucket filled with water while cleaning, or simply doused with tea or juice. All this will lead to malfunctions of the device. But how to deal with this and what to do if the phone falls into the water?

A set of measures to rescue a drowned phone

What to do if your phone falls into water, and what could be the consequences?

By and large, the above methods can completely save the phone. The worst option is liquid getting under the screen, especially if it is touch-sensitive. It will be impossible to restore such a screen, and buying a new one will be very expensive. Salty sea water is especially dangerous - it can lead to rapid corrosion of the circuit boards inside the telephone. If the above measures still did not bring the desired result, and the phone still does not work or works partially (some functions have failed), then it is better to quickly contact a service center to repair the device.