4 votes

Good day, dear readers of my blog. I was very surprised recently. It turns out that you can earn good money with just one Photoshop skill. The option that we will talk about today is in serious demand. If you manage to complete the project well and get noticed, then there will be no end to clients.

Many girls charge 500 rubles for half an hour of such work. Today we will explore Photoshop - how to insert a face into another photo. In this tutorial you will find all the steps that the professionals do. Unfortunately, on YouTube, authors often miss some of them. The result is not very good.

But let's not delay. We have a lot of work to do, although not difficult. By the way, at the end you can find a training video and reduce your reading time. Well, shall we get started?

Spectacular collage in 15 minutes

So, I'm going to superimpose the face of Aishwarya Rai, the glamorous Indian actress, onto Emilia Clarke's portrayal of Daenerys Targaryan. It has long been interesting what would have happened if an Indian woman had gotten one of the main roles in Game of Thrones.

By the way, there are online services and mobile applications for such operations, but you will never be able to work with them as efficiently and realistically as if you used Photoshop.

First, through the “File” - “Open” menu, I need to extract both images into the working window.

Now, using a simple Selection tool, I capture the face in the image. I only need eyebrows, nose, eyes and lips. The oval of the face and all the others will belong to the source. Then the result will be better.

Now I take the Move tool and drag the newly selected fragment into the first tab.

I set the opacity of the new face to about 60%. This is necessary in order to see the bottom layer and perform the mixing smoothly.

Remove the visibility of the previous two layers. Just click on the "eye" icons.

Now remove the hard edges from the edges of the image.

At some points, when using a brush, someone else's eyebrow, part of the eye, or something else unnecessary may appear. In this case, change the tool to the Healing Brush or Stamp. They will allow you to correct the picture.

Now we need to work on the face. Merge all layers using the keyboard shortcut Ctrl+Shift+Alt+E.

Click in the “Camera RAW” filters section.

Using the tool on top, select the area of ​​the face. Move to the bottom of the panel on the left to check the box next to “Effect” - “Inside”. Otherwise, all changes will be applied to the outside of the photo.

Tweak the sliders to achieve a better and more natural effect. Try it. It may not work out right away. Over time, you will become more sensitive to changes and what adjustments need to be applied. Unfortunately, there is no single scheme, since all photographs are different and there can be a million collage combinations.

Well, we have reached the final stage. Working with the entire photo. This will help polish it and set up a unified composition. Go to the "Editing" section. I prefer to use Curves for correction, and then work on the color tone later.

I set curves to even out light and shadows.

And finally, I create a unified composition using color balance. Everything is in the same editing menu.

This is the result that suits me.

By the way, you can use another interesting effect. Apply a mask to the topmost layer. We already did this today. Then take a black soft brush and leave only the very top and bottom layers visible.

You can erase part of the face you just drew. In this photo I left only Aishwarya Rai's eyes, and returned the lips from Emilia Clarke.

You can open one eye or divide your face into two parts.

In general, have fun at your own discretion. It will be funny.

Video instruction

Well, now, as promised, a training lesson in which all the same actions are performed that are described in the article. If something is not clear, you can refer to the text and vice versa.

Of course, to achieve an ideal result, I would advise you to acquire additional information about all correction tools. Information about them and more can be obtained from Zinaida Lukyanova’s course “ Photoshop from scratch in video format ».

By the way, if you are interested not only in entertainment, and you are thinking about it, I can offer you an interesting one, as well as a subscription to my blog’s newsletter. Here I talk about design, websites, and everything you might need for stable and good income.

See you again and good luck in your endeavors.

The photography industry is developing rapidly, so it is not surprising that everyone wants to get high-quality photographs. Their processing has become especially popular thanks to social networks. Previously, you had to use special software, which was not always easy to understand due to navigation, so it is not strange that many people want to insert a face into a photo online for free. To do this, you can use our service, which provides a variety of options for processing images. Believe me, not many resources allow you to do a lot of manipulations with photographs.
Our website also offers a wide selection.

Work principles

Before inserting a face online for free into any image, there are a few things to consider during pre-processing:

• The photo format must be of high quality;
• You can’t take a photo with expensive equipment, but if you’re using a phone, you need to make sure that your face is clearly visible;
• Before inserting a face into a template online for free, you need to decide on the color scheme and design.

The photo editor works with images of different quality, but the issue of color balance remains relevant, so you need to seriously address the correction. It is not necessary to use professional programs: before inserting a photo into a picture, you can process the image using an online service. The main thing is that all this is available without registration.
To make a photo montage online for free, inserting a face into a picture is quite simple:

• go to our service;
• select the appropriate section;
• select the necessary photo templates;
• Upload a photo;
• save the image on your computer.

It’s easy to create an interesting image with your own image for free without registration: go to the service, select a template and insert your photo. After this, the picture can be posted on various network resources.
Do you want to attach? Do it on best-photoshop.

Advantages

Photo montage is one of the ways to insert a face into a picture online without registration and for free. Now everyone can feel like a star posing for magazine covers, visualize dreams of a vacation on the coast of an exotic island, imagine, at least for a minute, what it’s like to be the hero of a famous film.
When working, you need to adjust the color scheme, brightness and contrast of the image. The work is quite complicated and takes more than one hour, but if you insert a face into a photo online for free, you can avoid this process, since the service offers different filters for pre-processing.
If we talk about the advantages of using such resources, there are several of them:

• available without registration;
• various photo templates;
• simple interface;
• clear navigation;
• A full-fledged photo editor is available on one resource.

Analyzing all the advantages, we can come to the conclusion that creating photo effects with a face online for free or inserting a photo into an image is much more convenient than using special software that needs to be installed on a computer.
Internet services require the use of a variety of devices, including phones and tablets, because there are no system requirements. Now even those who have never done anything like this before can take a beautiful photo in just a few minutes. In addition, such a photo will be an excellent gift for family and friends. It does not need to be used only on social networks, but can be printed and hung on the wall.
Choose a photo montage and get beautiful images without much effort.

29.01.2017 28.01.2018

Hello to all regular visitors and guests of the site site

In this tutorial we will look at how to insert a face into another photo in Photoshop. And let's fool around a little.

It is worth noting that the main aspect that you need to remember before creating a montage using faces is the sources. Their choice must be taken carefully and seriously, because the result depends on the choice of the source. It is necessary to ensure that the tilt and position of the head, lighting match, it is necessary that the photos are taken from the same angle, etc. Otherwise, you should not count on a high-quality result.
As mentioned earlier, we decided to play around and insert Putin's face into Trump's head. Download images.

Open Photoshop and start working

Open both photos in Photoshop (Ctrl + O):

Let's move on to the photo with Vladimir Vladimirovich and select the face in any convenient way.

For example, the Lasso Tool. The hotkey for calling the tool is L.

We select Putin’s face - we capture all the facial features, partially cut out the forehead:

Press Ctrl + C on the keyboard to copy the face, go to the recipient - Trump and press Ctrl + V to paste the face into the document.

Press Ctrl + T on the keyboard to call Free Transform.

Resizing the face to match the size of Trump's face:

To fit the face even better, reduce the opacity of the layer and try to make the eyes, lips and eyebrows match:

Once you have successfully placed the face, return the opacity back to 100%.

Go to Select – Modify – Contract:

In the drop-down window, set the radius to 5-8 pixels:

Go to the layer with Trump and double-click on the lock to unlock the layer:

Press the Delete key on the keyboard. After this, a “hole” will appear on the layer with Trump:

Press Ctrl + D on your keyboard to deselect. Hold down the Shift key and select both layers in the layers palette:

Go to Editing – Auto Overlay Layers (Edit – Auto – Blend Layers):

The settings should be as follows:

All the shortcomings of automatic insertion can be corrected, for example, with the Mixer brush tool.

Create a new layer:

In the top settings panel of the Mix Brush tool, set approximately the following settings:

On a new layer, use a Mix brush to go over the areas where the photo meets. We especially pay attention to the left side of the face:

Create another new layer and fill it (Shift + F5) with 50% gray:

Go to the menu Filter-Noise-Add Noise:

Add 1-3%:

Change the layer blending mode to Overlay (Overlay):

Right-click (right-click) on the layer in the Layers palette and select “Create Clipping Mask.” This way the noise layer will only affect the layer on which we painted the Mix with the brush.

So we found out a way to simply, easily and quickly insert a photo into another photo. A very accessible method in Photoshop!

Success in creative work! Let the Muse never leave you!

Many modern parents, trying to capture their children in a group photo, are faced with the problem when all the children look and smile at the camera, and one of them inevitably turns away at the moment of shooting. Naturally, the photograph has to be redone several times, and still there will be one restless child who will definitely ruin the whole picture. How would you like to leave at least one good photo as a souvenir? There are also times when parents just want to insert their child’s face into a ready-made interesting Photoshop template. It’s now easy to insert a face into a picture with modern plugins and graphics programs. Even those computer users who have never worked in Photoshop will quickly master this simple task with a training lesson.

Step 1: selecting a template and the required photo angle

Before you start processing photos and creating collages, you need to familiarize yourself with the basic tools of a graphics program, as well as understand the structure of the Photoshop program. Inserting a face into a picture is already a five-minute task once you have mastered the basic knowledge.

First of all, you need to choose any PSD template into which you will insert the child’s face. This can be from different angles: profile, full face, slightly turned to the side. This is why it is necessary to take different photographs of the child from different angles. “Photoshop” allows you to slightly rotate any object clockwise or counterclockwise, but the profile must match the template for the result to be the most believable and natural.

Step 2: Selecting the face using various Photoshop tools

After importing the photo into a graphics program, you need to cut out part of the object (in our case, this is the child’s head) and insert the face into the picture, collage or ready-made template. What tools do you need to use for cutting?

There are several basic tools that can be used to carve a face. You can use a pen. To cut out part of an object, you need to select the required area point by point. Then right-click to bring up the selection options and click on “Create selected area”. This way the face is highlighted. Now you can simply drag and drop it onto the finished template.

You can select part of an object using another tool. We switch to the quick mask editing mode by pressing the Q hotkey. Next, select a brush: hard, if you need to make the contours of the selected object clear, and soft, if you need to select complex objects such as hair, fur, etc. Paint over the required area of ​​the face with a brush and exit the quick mask mode. Our object is highlighted. Now it can be transferred to another picture.

Step 3: Working with Layers in Photoshop

Once you have dragged and dropped from one photo to another application, inserting a face into the picture is no longer a problem. It is necessary to fit the object as accurately as possible to the scale of the template. To do this, select the face layer and press the key combination Ctrl+T. Now you can change the scale of the face. But to maintain the correct proportion, hold down the Shift key and drag the mouse over the corner of the selected object. This will increase or decrease the width and height of the face proportionally.

1. Before creating a photo collage, you need to take into account the approximate dimensions of both images. It will be better if the photo with the child is much larger or approximately the same size as the Photoshop template. Scaling the face will result in unsightly pixel quality.
2. The finished template should roughly match the quality of the photo. It’s not difficult to insert a face into a picture, but will it look natural if the finished collage is in a good format, and the face in the photo is pixelated?

So, inserting a face into a picture yourself so that the result is natural and believable is possible even for those who have not used a graphics editor before. All you need is a little knowledge and perseverance.