How to remove the alarm clock on an electric watch. Alarm clock in Casio watches - settings and types of alerts. Watch "Fast sport"

A unique feature of the WR-30M wristwatch is its versatility and the variety of functions performed by this watch:
1. Ultrasonic mosquito repeller;
2. Powered by batteries and solar panels;
3. Waterproof (up to 30m);
4. Digital stopwatch (6-digit display);
5. Backlight for 3 seconds;
6. Alarm clock and hourly signal;
7. Calendar;
8. Battery life – more than 1 year, 500 hours in mosquito repellent mode;
9. Adjustable strap.

WR-30M Controls
1 – MODE button
2 – SET button
3 – Mosquito repeller on/off button
4 – ADJUSTMENT/LIGHT button
5 – LCD display

Time setting WR-30M
Press button 1 (MODE) 3 times to enter time setting mode. The seconds indicator will start flashing;
Press button 4 (LIGHT/ADJUST), the seconds indicator will be reset to zero;
Press button 2 (SET), the minute indicator will flash;
Using button 4 (LIGHT/ADJUST), set the minutes;
Press button 2 (SET) again, the clock indicator will start flashing;
Using button 4 (LIGHT/ADJUST), set the hour;
Set the date, month, day of the week in the same way.

Alarm
Setting the alarm:
Press button 1 (MODE) 2 times to enter alarm time setting mode. The hour indicator will start flashing.
Use button 4 (LIGHT/ADJUST) to set the hour;
Press button 2 (SET) again, the minute indicator will start flashing;
Use button 4 (LIGHT/ADJUST) to set the minutes.
To turn on the alarm, while in CLOCK mode, simultaneously press buttons 2 and 4 (SET and LIGHT) - the “ALM” indicator will appear on the display.
If you press button 4 (LIGHT) during the alarm, the alarm will turn off, but the alarm will repeat after 5 minutes. If you press button 2 (SET), the signal will not repeat.

Hourly signal
To turn the hourly signal on/off:
While in CLOCK mode, press and hold button 2 (SET);
While holding the SET button, press the 1 (MODE) button;
The hourly signal is turned on - segments of all days of the week are colored red.
The hourly signal is turned off - the weekday segments are transparent.

A simple life situation: we exchanged an apartment for a new one with more rooms. And the children immediately took the alarm clock from our bedroom for themselves with the words: “We need it more, you’re always not late for school.” My wife commented briefly: “And thank God, I was just annoyed by the sound of their alarm clock, more like a distress siren or worse.” But on the contrary, I felt completely uncomfortable: not only do I wake up in the middle of the night, I don’t know what time it is, and there’s no alarm clock, and I’ll need it.

The mobile phone at the head of the bed was immediately swept away ( It's dangerous to keep it near your head for a long time) and mechanical watches too: not only is it not always clear in the twilight what time it is, and you have to wake up to “turn on your brain,” but their ticking does not coincide with the rhythm of the heartbeat even during sleep. And if so - choose an electronic watch, especially since I never thought it would be so difficult.

However, a trip to the nearest watch store cooled my ardor. No, the choice was large, and even huge, but I did not consider mechanical ones at all, and two ... three models of electronic luminous ones (remember about the night and morning twilight) were offered with only one melody, if THAT can be called a melody at all. It is rather a very sharp and loud squealing and howling that raises even the dead. And they didn’t cost “five kopecks” at all, and I was simply “crushed by a toad.” This means straight to Aliexpress.com. Moreover, most of the orders from him pleased me rather than greatly disappointed me.

Model requirements I didn’t present any special ones, but they were still there

24-hour (I just don’t like AM and PM) time display format;
Various alarm ringtones to choose from;
Compact dimensions;
Autonomous operation, that is, on batteries or rechargeable batteries.

I chose the model quickly enough NI5L New Digital LCD Alarm LED clock(I liked it), and also with free shipping. And the price of this alarm clock is ~360 rubles.

I paid through the webmoney service and even managed to forget, since the notification about sending it to the “soap” arrived almost immediately, and I did not track the movement. Delivery – Russian Post.

Received it quickly enough, I didn't even have to worry. The packaging is an ordinary yellow paper envelope with plastic bubble wrap inside. It contains the alarm clock itself and small instructions in two languages: English (not bad English) and Chinese. Three microfinger batteries were not included, What was stated in the product description. This means that it was also not possible to test them immediately at the post office to see if they work.

The battery compartment is on the back, under a simple plastic cover with a latch, so if you don’t have a screwdriver at home, it doesn’t matter. You just don't need it.

I inserted the treasured batteries and the welcome music immediately started playing.

Yeah, in addition to the clock and alarm clock itself, this model also has thermometer, measuring the ambient air in Celsius and Fahrenheit. Moreover, as further operation showed, these values are very close to the truth, and the discrepancies are tenths of a degree. Nice free bonus.

Weighing with batteries showed a little over 100 grams, so this value can simply be ignored. As they say, “the NI5L alarm clock is unlikely to become a melee weapon.”

Backlight. It's really bright, a nice blue-blue color, so you get a kind of night light included. True, there is a “fly in the ointment” in all this: it goes out pretty quickly, so you either do everything with almost lightning speed (yeah, at night in pitch darkness, is a half-asleep person really capable of this?!), or simply press the “Light” button a few more times. And more shortcomings were simply not noticed.

Setup. Everything is simple and clear, done intuitively. So I never looked at the instructions. Moreover, this applies not only to the clock itself and the daily alarm, but also to the timer, as well as a second alarm, which can be set for a specific day of the week. By the way, it changes automatically when the date changes directly.

Themselves sound notification melodies a little, just 7 plus 2 variations of long beeps. But you can still choose the optimal one, which does not irritate, but unobtrusively wakes you up in the morning.

That's all. I hope this short article will help you make your choice and order a suitable model of a simple alarm clock, such as this one.

Slap watch "Pulse"

Battery

Water protection

Caring for your watch

Modes:

1. Clock (hour, minutes, seconds) and date
2. Stopwatch
3. Alarm clock

The "B" button switches between editable parameters. The numbers are changed using the "C" and "D" buttons. Go back to the current mode - button "B".

Setting the time and date:

In time display mode, press button "B" 3 times, then use buttons "C" and "D" to set the current time and date. To return to normal mode from the setup mode, press the "B" button.

Select between 12/24 hour time display - button "D"

Stopwatch:

In normal time display mode, press button "B" 2 times, start the stopwatch with button "D", stop the stopwatch with button "D". Reset the stopwatch: after it stops, press the "C" button.

Alarm :

In the time display mode, press the “B” button once, then use the “C” and “D” buttons to set the hours and minutes. If the alarm is set correctly, an alarm symbol will appear on the clock dial. To turn off the alarm, press the "B" button once, then press the "D" button. The alarm symbol should disappear from the watch dial.

To return to normal mode from the setup mode, press the "B" button.

Backlight:

Button "A" turns on the backlight of the clock dial. The backlight is active when the "A" button is pressed and held. If you do not press any button within three seconds, the clock backlight will automatically go out.

Watch "Fast sport"

Watch "Electronic sports"

In the "Clock" mode you can edit:
- seconds
- watch
- minutes
- year (in the current mode this parameter is displayed as the day of the week)
- month
- date
The transition between 12 and 24-hour time systems is carried out with the LIGHT/RES button.

In the "Alarm clock" mode the following can be edited:
- watch
- minutes
- month
- date

In the "Additional hours" mode the following can be edited:
- watch
- minutes
In this mode, an additional time is configured, above which the main time will always be displayed.
In the "Timer" mode you can edit:
- seconds
- minutes
- seconds
The transition between the "AUTO" and "MANUAL" modes is carried out with the LIGHT/RES button.
In Stopwatch mode:
Start and stop - ST-STOP button, reset - LIGHT/RES button.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Future"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. Between your wrist and the strap should go through your finger.
To clean the strap, use a dry, soft cloth, or a soft cloth dampened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.). The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.
Turning on the clock
The watch is turned on by pressing either of the two buttons once. Button "A" turns on the animated backlight of the clock, button "B" turns on the usual static backlight. By pressing the "A" button, the "Current mode" switches between modes in the following sequence:
- time (hours and minutes) - P
- date (month and day) - D
- day of the week - W
Setting the clock
The display is configured by successively pressing the “B” button and then the “A” button.
There are two ways to switch to editing mode:
Option 1. Press the top, then the bottom button.
Option 2. Press the bottom button twice.
The parameter being edited will begin to blink and you need to use the “A” button to set the desired position of the numbers. Next, use the “B” button to select the appropriate parameter and continue editing with the “A” button.
:
1. Hours (1-12)
2. Minutes (05-60 in 5 minute increments, four square dots in the center of the clock display will be used to set 6, 7, 8, 9 minutes)
3. Month D (1-12)
4. Day D (1-31)
5. Day of the week W (1-7)
6. Display backlight brightness (4 levels): adjustable by selecting the number of square dots
7. Display backlight time 60 (05-60 seconds)
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out. The screen turns off automatically after a specified time interval (05-60 seconds in 5 second increments).

Watch "Leg"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. Between your wrist and the strap should go through your finger.
To clean the strap, use a dry, soft cloth, or a soft cloth dampened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.). The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.
The clock is turned on by lightly touching the display:
1 time - time (hours, minutes)
2 times - date (month, day)
3 times - seconds
Setting the clock
1. Lightly touch the display to enter the “Current time” mode.
2. Touch and hold your finger in the center of the display - the parameter being edited will begin to blink. Now you need to change the numbers with light touches. Next, use repeated long touches of the display to switch from mode to mode and continue editing with light, short touches.
The clock display is configured in the following sequence:
1. Hours (1-12, A-am or P-pm)
2. Minutes (00-60)
3. Y (00-100)
4. Month D (1-12)
5. Day D (1-31)
(do not touch the display), the clock automatically returns to the “Current Time” mode and the blinking stops.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Original"

Watch "Touch"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. Between your wrist and the strap should go through your finger.
To clean the strap, use a dry, soft cloth, or a soft cloth moistened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.).
Turning on the clock
The watch turns on by lightly touching the display once. By touching again, the “Current mode” switches between time (hours, minutes), date (month, day), seconds.
- time (hours/minutes)
- date (month/year)
- seconds
Setting the clock
1. Lightly touch the display to enter the “Current Time” mode.
2. Touch the right side of the display near “SET” to enter “Edit Mode”. The parameter being edited will start flashing. Now, lightly touch the left side of the display near “MODE” to change the numbers.
3. Next, by repeatedly touching the right side of the display near “SET,” you can switch from mode to mode. Editing continues with light touches or a continuous touch on the left side of the display near "MODE".
The clock display is configured in the following sequence:
1. Clock (1-12/1-24)
2. Minutes (00-60)
3. Month (1-12)
4. Day (1-31)
5. Year (2001-2099)
6. 12 or 24 hour time display system
If you make no changes in edit mode(do not touch the display), the clock automatically turns off.
If you do not touch your watch within three seconds, they automatically go out.

Clock "Data"

Modes:

1. Clock (hour, minutes and seconds)
2. Stopwatch
3. Alarm clock
4. Date

The MODE button switches between edited parameters. The numbers are changed using the ST/SP and RESET buttons. Go back to the current mode - MODE button.

Setting the time and date:

In time display mode, press the "MODE" button 3 times, then use the "RESET" and "ST/SP" buttons to set the hours and minutes. By pressing the "RESET" button again, you enter the mode for setting the current date and day of the week. You can view the date in the current mode by pressing the "ST/SP" button.

A significant part of electronic watches is manufactured abroad. By ordering them from well-known companies, people receive high-quality and durable electronic watches, the instructions for which do not contain Russian text. Electronic wristwatches contain many functions, but they only have two buttons, which can be confusing when you need to set them up. In fact, everything is not as complicated as it might seem.

How to set up an electronic clock?

This is done quite simply. Usually in electronic wristwatches the first button is labeled with the word “mod”. It is needed in order to switch device functions, which include settings. The other button is called "set". It is she who changes the value selected by the first button.

So, to set the time, you need to press the first button. This will cause the number displaying the hour to flash. Now you need to press the second button, and the number will change. When the required value is set, you need to press the first button again so that the minutes flash. They are configured in the same way as the clock, by pressing the second button. Now that the time is set correctly, you need to press the first button again to exit the setting mode.

Sometimes electronic watches have not two buttons, but four. In this case, setting them up is even easier; you also need to press the “mod” button, and then, when the clock numbers flash, press first “set” and then one of two additional buttons. The first (top or left, depending on the model) increases the value, the second - decreases. After this, you need to click on “mod” again and do the same steps with the minutes.

How to set up an electronic clock if there are even more buttons?

In this case, it is better to follow the instructions. Typically, additional clock buttons call up an electronic thermometer, calendar or stopwatch; they simply display them, but do not adjust them. To configure, you need to press the “mode” button several times, scrolling through function by function. When the required option is displayed, you can begin setting using the “set” button. Electronic watches allow you to configure everything that it contains in this way: time, date, alarm, stopwatch, etc.

Setting an alarm on an electronic watch

Almost all electronic watches have an alarm. To start it, you need to press the first button several times, thus reaching the “alarm” inscription. The time is set as described above, the alarm is started and turned off by switching using the “set” button in the “on/off” field.

Electronic desk clock alarm clock with temperature measurement function

LCT047

BEGINNING OF WORK

1. Open the battery compartment.

2. Insert 3 new AAA batteries according to the correct polarity.

3. Close the battery compartment.

4. Once the batteries are inserted, the LCD display will light up. The default time is 02:00.

Attention:

If the display does not light up, try changing the batteries or pressing the button RESET.

CLOCK SETTING BUTTONS

SNOOZE / LIGHT– press this button to turn off the ringing alarm. In any mode, press this button to turn on the clock backlight for 5 seconds.

MODE– press this button to switch from normal mode to alarm mode and back.

ALM ON/ OFF– In normal/alarm mode, press this button to turn on/off the alarm/alarm snooze mode.

ADJ- In normal mode, press this button to move to date/month/year. In setting mode, press this button to change the setting value.

°С/°F– press this button to select the temperature display format.

RESET– Click this button to reset all settings. If there are errors in the clock operation, you need to reset all settings and reset the clock.

CHARACTERISTICS

1. Alarm snooze/backlight button ( SNOOZE / LIGHT)

2. LCD display

3. Mode switch button ( MODE)

4. Alarm on/off button ( ALM ON/ OFF)

5. Set button ( ADJ)

6. Temperature mode format selection button °С/°F

7. Button RESET(reset)

8. Battery compartment cover

9. Stand

Arrangement of symbols on the display

Normal mode

4. Day of the week

5. Temperature

Alarm mode

1. Alarm time

2. Alarm icon

3. Alarm mode

4. Alarm snooze icon

SETTING THE TIME AND CALENDAR

1. In normal mode, press and hold the button for 3 seconds ALM ON/ OFF

2. Press the button ADJ

3. Repeat the above operation to set HOURS - MINUTES - SECONDS - 12/24 MODE - YEAR - MONTH - DATE.

SETTING THE ALARM

1. In normal mode, press the button ALM ON/ OFF once to turn on the alarm, the icon will light up « "; twice – the alarm repeat mode will turn on ( SNOOZE), the “ Zz"; three times – both the alarm clock and the snooze mode will turn on.

2. In normal mode, press the button MODE to set the alarm time.

3. Press and hold the button for 3 seconds MODE. The hour number will begin to flash.

4. Press the button ADJ to set the correct value.

5. Repeat the above operation to set the minutes.

Attention:

1. After turning on the snooze function, the alarm will ring 5 times within 60 seconds with a 5-minute break.

2. Press the button SNOOZE / LIGHT to stop the alarm from ringing and switch to snooze mode. Press the button if you want to not only stop the alarm from ringing, but also turn it off completely.

REPLACING BATTERIES

When the symbols on the display become dim, you need to replace the batteries - 3 pcs. type AAA.

ATTENTION!

Please dispose of used batteries in an environmentally friendly manner.