For your SmartWatch 3 accessory to function properly, you must first install the latest version of the Android Wear app on your Android™ phone or tablet, and then pair and connect your phone or tablet to the accessory. This step can be completed in two ways. Can use NFC; This will automatically open a link to the Google Play™ download page for Android Wear. If your phone does not support NFC technology, pairing can be configured manually. Remember that your phone or tablet can only be paired with one SmartWatch 3 accessory at a time.

Setting up SmartWatch 3 using NFC

Phone or tablet: Make sure NFC is turned on and the screen is active and not locked.

Place your phone or tablet over your SmartWatch 3 so that the NFC detection areas of both devices touch. Your phone or tablet opens the Google Play™ page to download the Android Wear app.

Phone or tablet: tap the relevant text or icons on the screen to download and install Android Wear.

Phone or tablet:

Phone or tablet:

Phone or tablet:

Phone or tablet:

Manual setup of SmartWatch 3

Make sure your Android™ phone or tablet is connected to a Wi-Fi® network and remains connected to Wi-Fi® throughout the setup process.

Turn on SmartWatch 3.

Phone or tablet: Find the Android Wear app on Google Play™, download and install it.

Phone or tablet: After installing Android Wear, open the Android Wear app and follow the onscreen instructions.

Phone or tablet: If Bluetooth® mode is not turned on, touch Turn on Bluetooth when prompted.

Phone or tablet: Select SmartWatch 3 from the list of available devices. A pairing code will appear on your SmartWatch 3 and on your phone or tablet.

On your phone or tablet, confirm that both devices display the same code. Your SmartWatch 3 now checks for updates, installs the required software, and then restarts if necessary.

Phone or tablet: Follow the onscreen instructions to complete the setup.

Once set up, SmartWatch 3 will prompt you to enable certain features, such as Google Now and location services, to enhance your experience and enhance your experience. If you require these features, please follow the instructions.

Owners who have recently purchased a smart watch for children with a telephone function are faced with a problem - how to use this device? We have written for you step-by-step instructions for setting up a children's smart watch using the example of a popular model with a SIM card, Smart Baby Watch Q50. The main purpose of this watch is to determine the location of the child. To configure you will need:

• GSM mobile operator card;
• smartphone or tablet;
• special application.

Characteristics

Display 128 x 64;
GPRS and GPS communication;
There is no Wi-Fi;
The strap is made of hypoallergenic plastic;
There is a sensor for removing the gadget from your hand;
Battery – 400 mAh;
Speaker, microphone;
Waterproof, shockproof;
Weight - 40 gr.

SIM card

The child's watch with tracking function and phone uses cards in the format Micro-SIM(size 15 × 12 mm). You can choose any of the leading telecom operators: Megafon, Beeline, MTS. The main condition is support 2G. The minimum tariff is suitable (up to 1 GB of traffic per month).
Before inserting a SIM card into a smart watch, you must:

1. Make sure your account balance is positive.
2. Activate the SIM card. Insert it into your smartphone and make a call to the number.
3. Disable Pin Code. In the smartphone settings Security.
4. Enable mobile internet. In the network settings Data transfer.
5. Make sure the watch battery is fully charged.

Now you can insert a SIM card into your children's watch. To do this, you need to remove the back cover by unscrewing 4 bolts (for the Q50 model, a screwdriver is included). Carefully lift the battery, as it is not completely removable and is connected by wires to the watch case. Slide the SIM card slot to the right until it clicks. Insert the SIM card and lock the slot.

Inclusion

Next, you need to turn on the children's smart watch. Hold the “On/Off” button for several seconds. Playing a melody is a turn-on signal. The time shown on the screen is zeros or incorrect, because the required time zone is not set. A mobile connection indicator also appears. The "E" icon at the top means Internet access. The device starts up in less than a minute. Depending on the cellular operator.

Application

The most popular application for children's smart watches - SeTracker. Today it is Russified and free. With its help, all the necessary settings are made, including connecting the watch to the phone. Download the application from the Play Market (Google Play) if your smartphone uses Android OS. For iPhone - download from the Apple Store. Install on your smartphone. Let's launch. In the window that opens, select the region (Europe and Africa) and the required Language. Next you need to go registration(Register - button in the lower right corner):

• Enter the license code (REG Code). Located on the back of the watch. Either dial manually or use QR code scanning.
• Login (account). Enter your email address.
• Child's name.
• Telephone. It is to this number that you will receive an SMS to reset your password if you forget it.
• Create a password (6-12 characters).
• Confirm password.
• At the end, click OK. In the window that opens, re-enter your account name and password for final login.

After registration, the application interface becomes available:

Thus, the SeTracker application allows any user to make settings:

1. Link your watch to your phone by registering it in the app.
2. Set the time on your smart watch.
3. Translate smart watches into Russian.

We will not describe the last two points in detail, because... this is done by simply selecting the appropriate menu section.
Let’s take a closer look at the functionality of the application for children’s watches with GPS.

Listening to the clock

First, let's figure out how to listen to a child through a smart watch. The Call Back function allows you to force the microphone on your smart watch to turn on, after which it automatically calls back to your phone. At the same time, the watch does not emit any sound signals or light indication, and you can hear what is happening around the child within a radius of 1-2 meters. To do this, go to the SeTracker application – Settings – Call back. Dial the phone number in 8. The caller's number must be recorded in the SOS contacts of the application.

Geolocation

Geolocation on Smart Baby Watch is configured by selecting one of three operating modes:

• Normal mode.
• Power Saving Mode
• Tracking mode

Phone book

How to add contacts to a smartwatch? Easily. In the application menu select:

• Allowed numbers. We enter the numbers of subscribers from whom you can call Baby Watch.
• Phone book. Enter and save a list of numbers and names that will be displayed on the watch screen. As a rule, this is no more than 10 contacts.

Now you can make calls from your children's smartwatch. Select the desired contact on the smartwatch screen. To do this, scroll through the phone book by pressing button 2.

Internet setup

Although Q50 is not allowed surf on the World Wide Web, we’ll tell you how to set up the Internet on smart watches for more advanced models.

• Make sure that the SIM card is inserted and the operator supports 2G.
• Find out the network settings specified on the provider’s official website.
• Turn on the device, go to Settings (Settings, Setup).
• “Connection options” item. Recorded under different names, depending on the model.
• Select accounts.
• Click on “options” - “add”.

Fields will open that are filled in as indicated on the operator’s website. The application is then launched on the smartphone. Transfer rate 171.2 Kbps. When loading and setting up, the G icon will appear. If it blinks and there is no network, you should restart your child’s device.

How to charge a smart watch

In order for the battery to hold a charge longer and last for a long time, after purchase it is recommended to fully charge and discharge the battery at least 5 times.
For charging, use the USB cable that comes with the watch. Using it, we charge the watch from a PC or laptop. You can charge a smartwatch from the network, but for this you will need a network charger with an output current of no more than 1500 mA.

Smart watches are gradually taking over the world. More and more people prefer them. After all, smart watches show more than just the time. It's essentially a mini-computer on your wrist. With their help, you can make calls, send and receive SMS, find out the weather, road conditions... And yes, you can also find out the time.

But wearing such a watch without synchronizing with your smartphone is almost pointless. But here's the problem. It is synchronization that most often turns out to be a stumbling block. So that you don’t have any problems with how to synchronize these two gadgets, read our article. Go.

The first thing to do is to fully charge the watch. And at the same time remove all protective films. When the battery is fully charged, the watch will notify you. Now it's time to move on to setting up your smartwatch. The first thing you need to do is select the system language and install the application from the store. On Google Play this application is called Android Wear. It's completely free. After this, you need to turn on Bluetooth on your smartphone.

Once the installation is complete, the program will prompt you to pair the watch with your smartphone.

A list of all smartwatches that operate close to the smartphone will be displayed on the smartphone screen. Select your model. And press the confirm button on the watch screen. If this does not happen, check whether Bluetooth is turned on in your phone.

When pairing is completed, the application will prompt the user to enable access to those notifications that arrive on the watch.

The user can set the time and date (of course, it’s a clock), manage Wi-Fi, turn on airplane mode, and set the brightness on the clock.

If this is a watch, then it should have a dial. And since this is a smart watch, then there may be more than one dial. Bored of the Rolex on your hand? With a light touch of your finger, the watch turns into Omega.

There are several ways to change the watch face. Sometimes a set of watch faces is included in an application that is installed on a smartphone. But more often the dials are already built into the watch itself. In order to change it, you should click on the current watch face. And hold it tight. After a few seconds, you can start swiping left and right, choosing the right look for your watch. When you have chosen what you need, click on it once. And voila - the new appearance of the watch is already making you happy.

Of course, it’s hard to imagine that something could go wrong in the process of synchronizing a watch with a smartphone. Google makes every effort to make everything intuitively understandable. But, as they say, even a stick shoots once a year.

In general, if something went wrong when setting up your gadget, then simply reboot the device. Although this method of troubleshooting makes enlightened gurus smile, it often actually helps.

Don't forget that to synchronize gadgets you need bluetooth turned on. Otherwise, the phone will not be able to send notifications to the watch. In addition, the distance between the phone and the watch should not be very large. No matter how powerful the sensor is in the phone, it has its limits.

Another possibility why the problem occurred is other Bluetooth devices that are located in close proximity to the watch or phone. Try turning them off for a while.

We hope that thanks to our article you will be able to easily and quickly synchronize your smart watch with your smartphone.

Sometimes smart watches often do not come with instructions for use, or they are in a foreign language. This is inconvenient for those who are purchasing a wearable gadget for the first time and do not know how to connect a smart watch to an Android phone. Let's look at how to do this.

Instructions for connecting a smart watch to a smartphone

How to synchronize a smart watch with a smartphone.

1. To get started, download the Android Wear app from the Play Market, it's free.
2. On your phone, turn on
3. Turn on the smart watch, launch the downloaded program on your phone, and place the gadget at a distance of no more than 1 meter from the smartphone.
4. In the application, click “Setup”, the name of the watch will be displayed on the screen, select it.
5. The codes will be displayed on the displays of both devices; if they are the same, click “Connect”, otherwise, repeat the procedure.

If the process is successful, the Android Wear app will display a Connected icon.

How to connect 2 or more smart watches?

Parents who have 2 or more children buy several children's smartwatches at once, the question arises: “is it possible to control 2-3 devices from one smartphone?” Yes, there is such a possibility. To get started, open the same Android Wear app. Next, you will see a down arrow next to the already connected devices, click it. Then the “New Watch” menu will open, where, according to the prompts, the second smart watch is connected. If you want to add a third gadget, follow the same instructions. There are no restrictions on the number of connected devices.

Read also:

Review of the Gsmin WR32S fitness bracelet

If you can't sync

Let's look at the popular reasons why Android wear devices do not connect to a smartphone. The first thing you need to check is your Internet connection – whether data transfer is enabled. If yes, let's look at 3 more reasons.

1. Updating the operating system and Google applications. Please pay attention to device compatibility. Smartwatches for Android wear connect to phones and tablets running Android 3 and higher. Check this setting. In addition to the OS, the device must have Google services 7.3.28 and later, Google search 4.0, and Android Wear 1.0 application.
2. See if you forgot to turn on Bluetooth on your phone (In settings, section “Wireless networks”).
3. The smartwatch should not have airplane mode enabled. Go to device settings and check.

These are the main points when a smartphone or tablet does not see the device. If the operating system and programs are of the required versions, airplane mode is disabled, and bluetooth is active, restart both devices. Resetting the settings also helps.

Go to the gadget settings, select the “System” section, and then “Disable and reset settings”.

If your phone still doesn't see your smartwatch, uninstall and reinstall Android Wear. Repeat the synchronization process.

The connection is complete, but it is unstable, what should I do?

If the connection between the smart gadget and the phone is successful, but it is unstable, check how far the devices are from each other: it should not exceed 1 meter. The Internet connection may also fail, make sure it is stable. Also try to follow the steps that apply if there is no connection: updating the OS and programs to the required version, checking Bluetooth activity, making sure airplane mode is disabled. Then we follow the same pattern: we try to reinstall Android Wear or reset the parameters.

Such a modern gadget as a “smart watch” is an electronic wristwatch that has a wide range of additional capabilities. These watches are extremely popular among the younger generation, entrepreneurs and business people, as well as among caring parents who want to always be in touch with their child. However, after purchasing such a watch, it is very important to know the correct way to set it up: connect your phone to the smartwatch.

Let's look at setting up clock synchronization with the most popular operating systems:

To synchronize devices, you need to download the application to your mobile device.

Scan the QR code of the smartwatch application, which is most likely indicated in the instructions, using the QR scanner in your device. If there is no QR code, search for the application by name in Google Play (for Android) or App Store (for iOS).

1. The application will be used in the future for synchronization between devices.
2. Follow the application updates and update it on time for the device to work correctly.
3. Some smartphones running the Android operating system may notify you that the installation was unsuccessful. First, you need to enable “unknown sources” in your mobile security settings, after which the application will be installed normally.

Setting up a connection to a smart watch

You need to make sure that the application is installed and Bluetooth is turned on on your smartphone.

Establish a connection between your smartwatch and your smartphone via Bluetooth. There are many applications, so the connection button can be located in different places in the application menu. It is mainly located on the main page of the application and is most often highlighted in a bright color or large font size.

After clicking on the pairing button, you will see a list of available BT devices from which you need to select your watch model. Once connected, the time and date on the smartwatch will be synchronized with your smartphone.