In the new version iOS you will see more options than in the previous one, but the OS is still quite crude and further development is underway. Therefore, its usability cannot be considered comfortable and impeccable. Many owners of Apple gadgets decide to roll back to an earlier version 10.3 for various reasons. On specialized forums, users of iPhones with firmware eleven most often discuss the following problems:

• iPhone is slow;
• The battery drains quickly;
• Many programs do not work correctly, do not start, or terminate spontaneously.

Of course, expecting stability from a new version of the OS, which is at the testing stage and intended for programmers who are finalizing it, is not very smart. If, by inertia, you updated your iPhone to the version iOS 11 and now you regret it and want to return it previous version, but you don’t know what actions you need to take, then below we will tell you and help you solve this problem.

Important Considerations for Downgrading iOS .

You can find out if earlier versions are available for your mobile phone on the website IPSW and keep information about your model there. For example, if we take iPhone 6 , then it can be returned to the tenth version of iOS, iPhone 5 generation is rolled back to the seventh version, and iPad Air to the eighth. Rollback is possible at iPhone 4 generations, more early models are not supported.

The following aspects should be given special attention when downgrading iOS:

• There is no need to download firmware from unknown Internet resources. If you do not find the firmware you are looking for, on the website IPSW , then most likely you will not find it on other sites;
• Be sure to back up your system, as a rollback may delete data you need;
• After downloading the version you need, connect your mobile phone to iTunes, and then click “Restore”;
• Carry out the firmware process with a fully charged battery on the phone.
  During the firmware installation, do not turn off the Internet, and do not disconnect the mobile phone from the personal computer.

There is a version that Apple made it possible to roll back the firmware version after the noise erupted about the poor performance of smartphones due to wear and tear battery. It remains unknown to the general public whether this was done on purpose or the developers made a gross mistake and did not take it into account during the creation process. Based on this, it can be assumed that the ability to roll back to an earlier version may be discontinued in the future.

What steps should you take before downgrading the firmware version? iOS c 11 on 10 ?

The entire preparatory process is very simple and after installing the tenth version, you can easily restore all the settings and data you need, but on one condition, you must have a backup in iTunes or iCloud made in this particular version of iOS. A backup created in a higher version cannot be used to restore data in an earlier version. Go to the menu " Settings " and look for the option " Touch ID and passcode " Turn off protection. Flashing to an earlier version is only possible with these settings.

In order not to lose your backup when rolling back from the 11th build of iOS to the 10th, you need to apply special utilities. For example, software such as Tenorshare ReiBoot performs a rollback efficiently and quickly, without losing the backup.

If, when using your phone, problems arise related to programs freezing and other similar, but not entirely critical, then this software will help solve them. To do this, you need to enable recovery mode and then turn it off; this method helps solve the most common and minor errors in the software. If you do not want to use the new build of iOS 11 at all, then you should do the following:

• Go to the site Tenorshare ReiBoot and download the distribution, then connect your mobile gadget to your computer.
• After this, your mobile phone should be detected by the computer, and you need to click on the link “ Solve all iOS freezes " and then click again, but on "Fix the operating system ».
• Click on " Further "and the utility will download the tenth version iOS firmware. After the entire build has been downloaded and is already on your PC, you need to click “ Start recovery " Now you need to wait until the flash memory is filled with the necessary data, after which the tenth version of the OS will be installed.

If you roll back to the 10th build of iOS using iCloud or iTunes, this method is more complicated and the backup copy may be lost, and then you will no longer be able to use the backup of the saved 11th version of the OS to roll back data and settings using iCloud service or iTunes. Data can only be restored using a backup made in the tenth version. If you do not have such a copy, then you need to save all the data you need manually and only then perform actions related to downgrading the iOS version.

How to change the firmware version iOS by 10th using iCloud or iTunes?

• Download the firmware archive file for the tenth version of iOS 10. Make sure that the file is suitable for your phone model.
  IMPORTANT! When downloading a firmware file using the Safari web browser, you must disable auto-unpacking of archives.
• Turn off the “ Find iPhone " To do this, enter the menu “ Settings ", in it select the menu option " iCloud ", and further " Find iPhone ».
• The mobile phone must be switched to work mode DFU . To do this, connect the turned on mobile phone to the PC and turn off the phone, then perform the following actions:

1. Click on mobile phone power button, and hold it for three seconds;
2. After three seconds, do not release the power button and at the same moment press the “ Home "and keep the two buttons turned on together for ten seconds;
3. Let's release the power button, but continue to hold the "Home" button until the iTunes application reports that it has detected a device that is operating in recovery mode and in the window that appears, press the " Yes ».

• For PC with installed Windows OS you need to press and hold the key Shift , and for Mac PC the key Alt/Option , then select the option “ Restore iPhone " You will see a dialog box in which you need to specify the folder where the previously downloaded file with firmware 10 is located.
• After specifying the path to the file, select the installation “ Restore and update "and do all the actions that the program tells us. The program will check the checksum of the firmware file and other parameters and if this is the right file, then within ten minutes another version will be written operating system.
• After successfully flashing your mobile phone, the message “ Hello »..

Now it is possible to restore all your data using backup copy 10 versions of iOS or configure the operating system from scratch.
If you have any troubles after flashing the firmware and rebooting the device, use the program Tenorshare ReiBoot .

After Apple released the final version of iOS 11, some users may have experienced slow operation of the system, for example, installing it on the iPhone 5s. If you want to roll back to iOS 10.3.3, on which your device worked stably, then you can use the instructions below - the process is quick and simple.

If you have not yet installed iOS 11, but are planning to do so, create a backup of your device, preferably with using iTunes. It is not possible to restore an iOS 11 backup to iOS 10.3.3.

Put the device into recovery mode

To allow iTunes to install iOS 10.3.3 on your device, iPhone, iPad, or iPod touch must be in recovery mode. This requires:

Disable the device.
- Hold Home button.
- Connect the gadget to the computer using a cord without releasing the Home button. The current version of iTunes must be open on your computer (PC or Mac).
- Wait for the iTunes connection screen to appear.

Install iOS 10.3.3

When iTunes detects that a device in recovery mode is connected to your computer, a dialog box will appear on the screen asking you to restore or update the gadget.

Click "Restore";
- In the second window that appears, click “Restore and Update”. Remember that after this step, the device will be reset to factory settings and all recorded data will be erased;
- When the update to iOS 10.3.3 window opens, click Next. Now the system will ask you to accept the user agreement and install the firmware.

Yesterday at the WWDC 2017 conference, Apple announced new version operating system iOS 11 beta 1, Beta 2, Public Beta and Beta 3/beta 4/beta 5/beta 6/Beta 7. Registered developers immediately received access to the first beta versions of firmware for mobile devices, participants in public testing will be able to try the new product until the end of the month, and the final release of iOS 11 is scheduled for autumn 2017.

But "beta" - trial version, while it is not stable, there are errors and other problems during the update or after the update. You can read more about them in a separate article. Therefore, many iPhone and iPad users are already showing a desire to roll back from iOS 11 to iOS 10. And now we’ll tell you how to do this.

How to rollback from iOS 11 to iOS 10.3.2 / iOS 10.3.3 without losing your backup

The software can help you downgrade from iOS 11 to iOS 10.3.2 for free, quickly and easily. Not only that, if you encounter a freeze, or other minor problems, then this program can solve and fix, you just need to enter recovery mode and exit recovery mode, this method will help you solve most errors. If you really don't like iOS 11 beta 1, the following steps will guide you.

If you downgrade to iOS 10.3.2 using iCloud or iTunes, this method is complex and may cause you to lose your backup, and you won't be able to use your iOS 11 backup to restore your data through iCloud or the iTunes app. Data can only be restored from a backup copy of iOS 10.3.2. If there is no backup copy of this version, then you will have to manually save all your photos and other necessary information before downgrading. Don't worry, the article will show you how to make a backup.

How to downgrade firmware from iOS 11 Beta 1/Beta 2/Beta 3/Beta 4/Beta 5/Beta 6/Beta 7 to iOS 10.3.2 using iCloud or iTunes

Step 1: First of all, you need to download the iOS 10.3.2 version firmware file. Make sure you have downloaded required file firmware corresponding to your device model. Download links for all supported versions of iPhone, iPad and iPod touch are provided below:

• iOS 10.3.2 firmware file for iPhone
• iOS 10.3.2 firmware file for iPad
• iOS 10.3.2 firmware file for iPod touch

Note: if you download the firmware file through the Safari browser, make sure that the automatic archive extraction function is disabled.

Step 2: Find My iPhone must be turned off on your device. To do this, go to Settings > iCloud > Find iPhone.

Step 3: Now you need to put the device into DFU mode. If you own an iPhone 7 or iPhone 7 Plus, check out this guide. For previous generations of iPhone, iPad, or iPod, follow these steps:

• Connect the device to the computer, turn off the device. Now press and hold the “Power” button for 3 seconds;
• Then hold down the “Home” button without releasing the “Power” button for 10 seconds;
• Release the Power button but continue to hold the Home button until the iTunes app notifies you that it has detected a device in recovery mode; In the window that appears, click on the “Yes” button.

Step 4: Press and hold the Alt/Option key on Mac computer or Shift key on Windows computer, and then select Restore iPhone (iPad/iPod touch). In the window that appears, specify the path to the previously downloaded iOS 10.3.2 IPSW firmware file.

Step 6: Then select "Restore and Update" and follow the on-screen instructions. and iTunes will check the firmware file and install it on the device. The process will take about 10 minutes.

Step 7: After completing the downgrade process from iOS 11 Beta 1/Beta 2/Beta 3 to iOS 10.3.2, “Hello” will appear on the device display. After completing the system setup process, you can restore the data on your device from an iOS 10.3.2 backup or set up the system as a new device.

Thus, if after a reboot the display of the battery charge disappears, Bluetooth from the shutter does not turn on/off, or the phone becomes very hot after the update, etc., it is possible to solve and fix them using Tenorshare ReiBoot.

Step 1. Connect your iPhone/iPad/iPod Touch to your computer via a wire. Open iTunes (it is advisable to update it to the latest version). The device should be detected in iTunes.

Step 2. Turn off your iPhone/iPad/iPod Touch. Power button (hold for a few seconds). Then swipe on “turn off”.

Step 3. Press the Power button for 3 seconds. Without releasing, hold down the volume down button (in some older devices the Home button). And hold these two buttons for about 10 seconds.

iTunes should respond and display a message:

iTunes detected iPad/iPhone/iPod in recovery mode. You must restore this iPad/iPhone iPod before using it with iTunes.

Step 4(main) B iPhone description The “Restore iPhone” button will appear. Click on it and agree that the iPhone will be restored to factory settings.

Step 4(alternative) You can download the final current version of the firmware, for example, from our article. Then hold Shift if you have Windows (Alt-Option for MacOS) on your keyboard and click the “Restore iPhone” button. After that, select the firmware file.

What will happen?

After this, iTunes will delete everything on the iDevice and download the latest firmware version.

Then there are two ways: either set up the device as new, or roll a backup copy if you made one in advance in iOS 10. Please note that having made a backup copy in iOS 11, you will not be able to roll it back to iOS 10. Your phone or tablet will tell you if that the backup is new and not suitable.

Is it possible to roll back to iOS 9, 8, etc. in this way?

NO! And again NO. You can't even roll back to 10.2.1, because it's fresh in this moment 10.3.2. Apple has such restrictions.

Is this instruction relevant now?

Yes, and will be relevant until release final version iOS 11 in the fall of 2017.

When Apple releases a new version of iOS, many users may find it tempting to install the iOS Developer Beta to get a taste of future functionality, especially with major releases like iOS 11 (), which includes .

The problem is that these pre-release versions of the operating system may be unstable, which will affect the performance of the iPhone or iPad. In this case, the best solution there will be a transition from the beta version to the official build. How to do this will be discussed in this article.

How to find out the version of the official iOS to which you can roll back?

Find out what the latest one is iOS version is relevant for all iPhones or iPads you can always.

You can download all official iOS firmware for any iPhone and iPad.

Do iOS 11 backups work after downgrading to iOS 10?

If you are planning to perform a rollback, you should be prepared for the fact that you will have to restore your iPhone or iPad, losing data such as settings, accounts Email, downloaded applications, etc. It's also worth remembering that an iOS 11 backup created in iTunes on a computer or iCloud not compatible with iOS 10.

How to downgrade from iOS 11 beta to official iOS 10

1 . First of all, take care of the safety of photos and videos from the Photos application. If you don't use iCloud Photo Library or others cloud services, the pictures will be lost. The same applies to other information.

Detailed recovery instructions iPhone firmware or iPad via iTunes on your computer you can find .

8 . After the current official version of iOS is installed, you will either have to use a backup copy of the data created earlier on iOS 10. As mentioned above, you will not be able to use the backup made on iOS 11 beta.