To prevent your phone from being lost appearance and was maximally protected from damage, it just needed a cover. The price for this accessory, although not too high, is still much more than average. This is why many people think about how to make a phone case with their own hands. By making it yourself, you can not only save money, but also get a truly beautiful and original accessory.

In order for the phone not to lose its appearance and to be maximally protected from damage, it simply needs a case.

Make covers for mobile phone can be done easily at home. Moreover, it is not at all necessary to use expensive materials for this. Even a cardboard product - a handbag - will perform its main functions, and will also look extraordinary and very beautiful.

What is necessary:

• cardboard;
• glue;
• epoxy resin;
• wooden sticks;
• acetone;
• cotton buds;
• decorative elements.

Progress:

1. First of all, you need to take measurements from your phone.
2. Cut out an unfolded blank from cardboard one and a half centimeters larger than the device itself.
3. Secure the edge of the cover using a wooden stick. Glue cardboard to it.
4. Strengthen the lower part of the workpiece in the same way.
5. All gluing areas must be coated with resin.
6. Glue decorations to the future case.
7. Using this epoxy resin, also treat the rest of the surface.

Wait a couple of hours for the resin to dry.

Gallery: DIY phone case (25 photos)

DIY budget phone cases (video)

Homemade leather case for smartphone

You can sew a classic leather case yourself; you don’t have to buy it in a store. This does not require special skills. Absolutely anyone can sew a case for a mobile device.

You can sew a classic leather case yourself

Progress:

1. Cut a rectangle from the main piece of leather. You need to determine the dimensions by clasping the original piece around the smartphone, leaving allowances for the seams.
2. Mark the line of the future seam approximately half a centimeter from the edge.
3. Mark the holes in the resulting workpiece using an awl.
4. Using a screwdriver, drill all the necessary holes.
5. After this, give each hole the correct appearance by making grooves.
6. After this, sew the sides together using twisted nylon thread rubbed with paraffin.
7. Leave the ends of the threads uncut, since after shaping the case you will need to make the last stitch.
8. Place the workpiece in water for a couple of hours and then place a plywood blank of the appropriate shape into it.
9. Leave the product in this form until completely dry.
10. After a day, take the blank out of the case and make the last stitch.

Cut off excess parts and sand the product.

Homemade book case

One of the most stylish and convenient accessories for a smartphone is a book case. You can also make it yourself. The work will only take a few hours.

One of the most stylish and convenient accessories for a smartphone is a book case.

Progress:

1. Circle the cover around the perimeter, add another centimeter and a half and draw an additional line.
2. After this, cut out the base of the future cover.
3. On the wrong side of the suede, draw a pair of center lines, the distance between which should be exactly a centimeter.
4. Trace the pattern of the largest of the parts on one side and the other from the axial ones.
5. Cut the pattern by one centimeter and circle the resulting blank under the frame.
6. Trace both axial sides and the inner part.
7. Cut out the resulting frame, making allowances along the inner cut, turn it to the wrong side and immediately sew short sections.
8. Sew the finished frame on top.
9. Sew together the internal and external parts of the product, while matching the external cuts.
10. Now fold the parts inward with the wrong side and sew, aligning the central parts.
11. Place a relief seam along the contours of the smaller part.
12. Now cut out a pocket and a belt, two and a half centimeters wide.
13. Sew a strap and attach buttons to it, sew on the front and middle of the case.

In the inner part of the workpiece, secure the pocket with threads and cut off its edge so that it is flush with the edges of the inner part.

How to update an old store-bought case: ideas

There is not always a desire to change a familiar, albeit shabby, old accessory for a new one. Parting with things is not easy for many people. But there is a solution. You can simply repair the old case, peel off unnecessary parts from it and add more original decorations. There are many ideas for restoring old covers. You will have your own personal design for the case.

The most original and simple options are made using the following materials:

1. Washi tape. An ordinary silicone case will sparkle with new colors if you glue multi-colored ribbons, sold in office supply stores, to the back of it.
2. Acrylic paints. Flight of fancy and no restrictions - you can draw any picture or just apply paint in a continuous layer. In any case, the case will look new and original.
3. Nail polish. It is enough to make multi-colored droplets on the case using varnish to make it look completely new.
4. Rhinestones. Gluing them to the product takes a few minutes. In this case, it will be possible to hide all existing defects.
5. Beads. You can attach them using hot glue and even regular plasticine. For a more reliable fixation, use a clear varnish.
6. Neon decorations. They already initially have an adhesive surface, so this work will be as simple as possible.

Silicone glue phone case

This one can rightfully be called one of the most creative options for making a case. The accessory simply cannot be compared with all purchased options. He looks very unusual and presentable.

What is necessary:

• hot glue gun;
• silicone glue sticks;
• scotch;
• baking paper;
• masking tape;
• rhinestones;
• nail polish;
• pencil.

We will conduct several master classes on making silicone, felt, knitted, leather cases, as well as amazing bumpers from a herbarium and a children's sock.

Case-herbarium

To make such a smartphone case with your own hands, prepare:

First, think over the composition, applying flowers in various variations to the surface of the cover. As soon as “the one” is found, we get to work:

1. Take a photo of the ideal layout to reference as you create.
2. Try to glue large and light parts first, and smaller and darker ones on top - under the influence of the resin, the plants will turn pale and become more transparent. Finally, sprinkle in glitter. Do not overdo it with details - the layer with vegetation should not be thicker than 1.5 mm.
3. Following the instructions, dilute the resin with water one to one.
4. Carefully pour the solution into the center. Then spread it over the entire surface of the painting, removing air bubbles.
5. Make sure that the resin solution does not overflow over the surface of the composition - in this case, quickly wipe it off with cotton swabs soaked in acetone.
6. The floral one for the smartphone will be ready after two hours of drying.

Silicone Case

You can make protective cases for smartphones from silicone yourself using:

Before making a smartphone case with your own hands, be sure to wear rubber gloves.

1. Mix 50 g of potato starch with approximately the same amount of sealant. Then knead this product to the consistency of plasticine, adding dye along the way so that the color is even.
2. Roll out the mass with a rolling pin or bottle on a flat surface to the desired thickness.
3. Cover all the holes of the phone with tape, then place it in the center of the resulting cake, pressing the device a little into it.
4. Then, using a spatula, bend the edges, making sure that the “pancake” fits perfectly to the smartphone.
5. Be prepared for the fact that the phone will lie “captivated” by this mass from 12 hours to a day - that’s how much the substance needs to harden.
6. Having taken out the phone, first remove the excess on the front, then cut holes for the camera, charger, headphones - they should be imprinted.

Felt cover

You can make a felt smartphone case with your own hands using:

And if you have a sewing machine:

1. Cut out two identical rectangles - the outer and inner sides. It is necessary to take into account the length, width and thickness of the device, as well as an allowance of 5 mm on each side for the seams.
2. On the outer side we cut off one corner diagonally, so that in the future it will become a convenient pocket.
3. Then place the parts one on top of the other (the outer pocket is on the outside), fold it in the shape of the phone and stitch, retreating 4 mm from the edge.
4. The felt does not fray, so there is no need to process the edges. If desired, decorate the product with a unique applique or patch - a universal smartphone case has been created!

Smartphone case

For this product you will need:

• leather or leatherette;
• a thin piece of plastic;
• universal glue;
• two flat magnets;
• awl, knife, scissors.

A leather case for a book-sized smartphone is made like this:

1. Cut out 2 pieces of plastic to the exact shape of the phone, and make a hole for the camera on one of them.
2. Glue a magnet to the “back” plastic in the right place.
3. Glue both pieces of plastic to the skin, leaving a distance between them equal to the thickness of the gadget.
4. Wrap a piece of leather so as to completely hide the plastic inside it, and glue it in the right places.
5. From a piece of leather, wrap a second magnet in it, form a clasp, and carefully glue it to the front part.
6. Don’t forget to make the necessary cuts in the leather for the camera and other necessary holes.
7. Using double-sided tape, glue the device to the case.

Knitted cover

The most “cozy” smartphone case you can make with your own hands is from yarn, namely, by knitting it. You won't need a lot of materials:

Here you can use two methods:

1. The simplest and fastest. Knit two identical fabrics using your favorite pattern and sew them together. Cast on loops across the width of the smartphone and then knit lengthwise. You can cast on loops along the length of the device and knit it narrower in width.
2. Knit “in one piece” - the same way as socks are knitted. Cast on stitches equal to two phone widths and then divide onto four needles. Continue knitting according to the chosen pattern, using only knit stitches, until the length of the product is equal to the length of the smartphone.

You can crochet such a product using the first method.

Baby sock cover

Go shopping or order cute, original children's socks through the online market. You can easily make a case for your smartphone from them yourself. You will also need scissors, a needle and thread, various accessories for applique to suit your taste - beads, pendants, ribbons, rhinestones, etc.

1. Cut off the areas of the heel, sole of the foot and toes so that the remaining part has a rectangular outline.
2. Sew up the open hem.
3. Fold the remaining uncut fabric that was supposed to cover the top of the foot up and sew it on the sides - this will be a pocket.
4. Decorate your creation with the trinkets you have prepared - sew or carefully glue them to this unique sock case.

There is probably not a person today who does not have his own mobile phone. They are used by everyone, everywhere: both the older generation and the younger. On the market mobile accessories You can find an endless variety of different cell phone cases. If you are used to being original and different from everyone else, then you will like this article.

Here you can find out how to make a phone case with your own hands, and what you need to have on hand for this. Original and simple ideas are waiting for you in the article today.

How to make a phone case out of paper?

Do you want to protect your mobile phone from scratches, cheaply and quickly? There is such an option - making a cover from plain paper. If you don’t have a case yet, but you need to run, drive, go somewhere, and you want your mobile phone to remain safe and sound throughout your trip, and you’re running out of time, the case in question is exactly what you need necessary.

So, the only thing we need to create the “protection” in question is a sheet of paper - in this case we will not use either scissors or glue:

1. Place a sheet of paper on the table in a horizontal position. You choose the color and size yourself.
2. Place your mobile phone on the left edge of the sheet so that there is room for a fold.
3. We begin to wrap the phone in paper, straightening out all the folds. We do this until the end of the sheet.
4. We bring the two ends of the sheet together and smooth them out. This will be the back of our paper cover.
5. Fold the bottom of the sheet up. We make several folds to the bottom of the phone case so that the case fits the size of the mobile phone.
6. We take the phone out of the case to make it easier to wrap the corners. This maneuver is done to ensure that the cover holds the shape we created.

The paper case is ready for use. It will take you no more than three minutes to “create” it, so this method of making “protection” for a mobile device is not only simple, but also quick. Now your phone is reliably protected from scratches and rain, and you can take it with you anywhere with peace of mind.

If you want, you can paint it or cut out a “window” for the screen and speaker so that you don’t even have to take it out, but in this case the screen needs to be covered with a protective film.

Now you're aware how to make your own phone case from a regular sheet of paper. Please note that in this case you will not need any glue or tape.

How to make a phone case from rubber bands?

Rainbow rubber bands have been a hit for more than one season. With them it is very easy to do different hairstyles and create interesting crafts. Today we will find out how to independently weave a bright summer case for yours from rubber bands of different colors. mobile device.

For this we need:

• 800 rubber bands (choose your own color palette)
• hook and weaving machine

A short list of necessary tools does not indicate the simplicity of the product, because making such a case will require patience, perseverance and inspiration to craft. It’s impossible to say that making such a case is easy, because the process is quite lengthy.

Detailed manufacturing instructions:

1. First of all, you need to decide on the number of colors from which your case will be made (the optimal option is 10 colors).
2. For weaving a cover on modern smartphone, you only need two rows of the machine. In the situation under consideration, the central row will not be needed, because we will only use two side rows. For convenience, the row in the center can be removed (if your machine has more rows, they can also be removed for convenience).

1. The placement of the columns themselves in the machine is very important. On one side, the open parts of the columns should point in one direction, and on the other side of the machine, in the opposite direction.
2. We choose what color we will start our weaving with (in the example it will be black).
3. We take an elastic band and carefully throw it on the first column in a row of eight, hooking it with its other end to the second column diagonally, it turns out that from the first column on the right, we throw it on the second column on the left.
4. Thus, we put on 10 elastic bands of the same color diagonally.
5. We turn the machine over and begin to throw rubber bands diagonally in the same way so that we get x-shaped figures.
6. We put one elastic band on the outer columns of the machine exactly vertically, on one side and the other.
7. Use your fingers to lower the elastic bands you have put on to the very bottom to make it easier to put on the next rows of elastic bands.
8. The next pair of elastic bands (of a different color) must be thrown from one column to another in the same row, from right to left. Continue this way until the end of the row, using two elastic bands of each color.
9. Perform the same “maneuver” on the other side of the machine.

1. Each row of elastic bands must be secured on the sides with black elastic bands, as in the first row.
2. Now we need a hook to start weaving. On all columns you need to remove the two bottom elastic bands. It turns out that we throw on one row, then we throw off the two lower elastic bands - this will be our weaving.
3. We hook the two bottom elastic bands and move them to the center. We do this with each column on both sides of the machine.
4. We lower all the elastic bands down for easy throwing and weaving of the next row of elastic bands.
5. To make the color transitions on the cover smoother, you need to add the next row of elastic bands, moving the color one column. To prevent the first column from being empty, you need to put an elastic band of a different color on it.

1. Now we repeat everything, starting from the eleventh point, each time shifting the color by one column for a smooth transition. We secure each row with a black elastic band.

The process of weaving a cover under consideration is quite long, and it is very difficult to complete the work in one go.

When Bottom part The case will be large enough, you need to check how many more rows you need to make so that your phone fits into it. To do this, you just need to put the phone into the made part of the case.

1. You also need to finish weaving the cover correctly. So, take a hook, grab two rubber bands on the first column in the row on the left, carefully remove them and transfer them to the next column.
2. We do this with each column in the row. We repeat in the same way with the columns in the other row.

1. The cover is ready, we remove it from our machine and try it on our mobile device.

This work is quite painstaking, but the result is worth it. The brightness and originality of the case will delight you.

How to make a phone case from a balloon?

If you use your imagination, you can come up with and “make” unusual and beautiful things with your own hands, for example, you can make an excellent case for your smartphone from an ordinary inflatable ball. Let's find out how to make a phone case at home using a regular ball:

1. Inflate the ball. No need to inflate too big, a medium size balloon is what you need
2. Place it on a flat surface, holding the inflating area with your fingers so that the air does not escape
3. Place a mobile phone on top of the ball
4. We press it against the ball, gradually deflating the air from the ball with the other hand. We do it carefully and very slowly
5. As the ball descends, we press the phone harder against its surface

When the ball completely releases the air, it will tightly “wrap” your phone with its surface, thereby protecting it from moisture, dust and shock.

1. If the tip of the ball bothers you, just cut it off

This case is a budget option, it:

• cheap
• practical
• it's easy to make
• and you can change the colors of the case at least every day

In addition, this is a universal protection option, because it is suitable for most models of modern mobile devices and tablets.

How to make a phone case from glue?

Did you know that you can not only glue and glue with hot glue, you can use it to make an unusual, practical and original phone case. The size, shape and model of the device do not play any role in this case. So, to make our case perfect, we need:

• hot glue gun
• parchment paper
• scotch
• for decoration – colored varnishes

Everything is done very quickly and simply, let’s get started:

1. Turn on the gun to heat the glue in it.
2. While it is warming up, we need to wrap our phone in parchment paper. You need to do this in such a way that there are no folds or excess paper left on it; the parchment paper should wrap the phone tightly and in one layer (adhesive tape will help with this).
3. Spread parchment paper on a flat surface and place the phone on it.
4. We draw various patterns with hot glue on the surface of the parchment paper in which the mobile is wrapped (the design and patterns are chosen independently, based on preferences and drawing skill).
5. Don't forget to leave space for speakers, side charging holes and headphones.
6. We wait until the glue has completely hardened so that we can carefully remove the frozen case from the phone.
7. We decorate it with all kinds of colored varnishes.

The main advantage of such a case is its originality and uniqueness. No one else will have such a case except you. You are now aware how to make a phone case with hot glue.

How to make a silicone phone case?

Probably, few people have encountered making something from silicone on their own. It turns out that not everything is as complicated as it might seem. So let's find out how to make a phone case made of silicone. We will need:

• disposable plate
• starch (potato or corn)
• silicone
• paints

Instructions for making a silicone case:

1. Pour some starch onto a plastic plate. It can be purchased at any grocery store or supermarket.
2. Pour a little silicone on top of the starch and carefully combine these two ingredients.
3. Add paints to the prepared “dough” (choose colors according to your taste) to get the color we need.
4. Knead the silicone like plasticine until it is soft and elastic and its color becomes uniform.
5. Now you need to start preparing your phone. To do this, you need to wrap it over the entire surface with cling film.
6. Sprinkle the table with starch so that the silicone does not stick to the surface, and begin to roll out the silicone “ball” we have made with a rolling pin.
7. We put the phone on top and form a case.
8. We remove all irregularities and excess starch with a rag, but only be sure to dry it.
9. Trim off any unnecessary excess silicone.
10. From the leftover silicone mixture you can make additional molds, patterns, and decor for the case.
11. We glue them to the case with silicone.
12. We cut out holes for the sensor, microphone and headset.

If you wish, you can decorate the case in any color.

How to make a book case for a phone?

Today, book cases have become a popular way to protect phones and tablets. Let's find out how to make a phone case from cardboard and felt without outside help to get a model of a case - a book, without spending more than 15 minutes.

Prepare immediately:

• cardboard (preferably thick)
• felt - several colors
• scissors
• elastic band for clothes
• cutter
• optional - self-adhesive decor in the form of rhinestones
• ruler with pencil
• glue gun

Manufacturing instructions:

1. You need to cut out three blanks from thick cardboard that will be identical to the size of your phone. To do this, place the phone on cardboard, trace the outline with a pencil, and cut it out. Duplicate the workpiece two more times.
2. We cut one of the cut-out pieces in half with scissors or a cutter.
3. We take A4 size felt and glue two halves of the cut piece onto it at a distance of 7 mm from each other.

1. We glue another whole blank to the felt at a distance of 3 cm from the previous blank.
2. We cut off the excess felt, leaving allowances to cover our cardboard with.
3. Glue felt of a different color onto the whole piece and one of the halves of the second piece.
4. The last piece of cardboard needs to be covered with felt of the same color as was used in the previous paragraph.
5. We glue small rubber bands on the edges of it, which will hold our mobile phone.
6. We glue the blank with elastic bands onto the part of the cardboard that remained unglued on the first part of our future cover.
7. We glue Velcro to the finished case, which will serve as a fastener.
8. We decorate the book case with rhinestones, stickers or beads.

If desired, the same the cover can be made of leather or any other fabric.

If you decide to “make” a phone case with your own hands, for these purposes you can use various available materials in the form of felt, silicone, fabric, glue, etc. The main thing here is your imagination and the desire to make something original and unusual with your own hands. The methods presented above are very simple and do not require any special expenses, so choose any of them, and go ahead and create your “works of art.”

Video: “How to make a phone case?”

The topic of this publication is how to make a leather phone case with your own hands at home. The materials from which modern mobile phones are made are distinguished by their quality and high technology, but still this does not always protect them from various negative influences. Due to an accidental impact or spilled juice, the most unforeseen consequences can occur, rendering the mobile phone unusable. And if a scratched phone simply loses its attractive appearance, then one drenched in tea may stop working altogether. Usually, phone cases at home are made from soft fabric or leather. Some craftsmen know how to make stylish plastic phone cases from... plastic bottles. True, today such cases do not look very modern. At the end of the article you will find two master class, with with which you can easily do DIY leather mobile phone case with a beautiful logo.

To prevent such troubles as scratches or spilled juice, phones began to be “dressed” in cases. Thanks to the case, the phone is more protected both from various physical impacts and from getting wet.

The most highly reliable cases are plastic cases, as they have the best protective characteristics. However, few people choose them, since the phone in such a case does not look very attractive.

You need to put a case on your phone, especially on a woman’s phone, because in your purse, where this is usually located small device, there are also a variety of things that can scratch him. In addition to protecting the phone, the case can also allow you to attach the phone, for example, to the inside pocket of a bag. For this purpose, some cases are equipped with special snap hooks. However, you should be careful with them so that the carabiner itself does not scratch the mobile phone screen. This is especially true for today's popular touch phones. Therefore, it is so important to choose the right case for your phone - soft, but not thin, capable of protecting the device from damage. You can easily make a case for a touchscreen mobile phone from wool, fabric, soft leather or suede with your own hands. It should be borne in mind that when choosing a model for making a case, it is better to give preference to a simple fabric or leather case rather than one decorated with beads, sequins and rhinestones, which themselves can scratch the phone.

For needlewomen who are keen on sewing, making a cover from scraps is not difficult, especially since they always have plenty of pieces of various fabrics. This is both nice, as it allows you to prepare a gift with your own hands just in case, and useful, because it allows you to use up at least some of the scraps. In addition, you can use leftover braids, ribbons and other materials.

You don't need any special tools to sew a phone case. Everything that is usually used when sewing is used. In addition to tools and materials, you only need a template - a model of the phone for which the case is being sewn. You can use it to take measurements and try on the finished cover. The easiest way to make such a model is from foam plastic.

Master class on making a case with a logo for a mobile phone with your own hands.

How to sew a stylish phone case from soft leather with your own hands. For work

Today it is difficult to imagine life without a mobile phone; we take it with us almost everywhere and actively use it day after day. In order not to damage the device that a person needs so much, a case is used to protect it. Naturally, covers can be bought in a store, but they are expensive and this item will not always be exclusive. You can sew incredibly beautiful covers yourself. There are a huge number of patterns for sewing cases; they are sewn from felt, leather, fabric, from any materials, the choice of which depends on your imagination. Let's try to sew a phone case with our own hands. It's not difficult at all!

First of all, you need to choose the material from which to create a pencil case for your phone with your own hands, for example, felt, jeans, wood. You also need to choose the style of the future cover: with a strap, with a Velcro fastener, with a zipper.

The main stages of the process of sewing a cover:
1.Pattern
2. Cutting
3. Sewing
Let's take a closer look at the algorithm step by step.

Pattern

The first stage is making a pattern for a phone case. The process is responsible. The mobile device is placed on a sheet of thick cardboard and outlined with a pencil. Based on the thickness of the phone, seam allowances are made. Cut out the pattern. You can quickly learn to sew yourself, then, if you wish, you can make non-standard and individual things with your own hands.

Cutting and sewing

The second stage is cutting and sewing the phone case. The pattern is applied to the selected material, parts of the future case are outlined and cut out.

The easiest way to connect the parts of the cover is with a stitch seam on a sewing machine using strong threads. Sewing a phone case from old things is very popular, for example, jeans, sweaters and even socks are used.

Assembly

The third stage is assembling the product. If the parts of the cover are connected using a sewing machine, then the outline of the seam is outlined with a pencil along the front part of the part. The details of the case are left with large allowances. Place both pieces of the phone case together and sew them together. After this, the allowances are cut off, leaving approximately 0.3 cm to the seam.

Master classes on the topic

We present to your attention several simple master classes on sewing cases and stands for your phone with your own hands.

DIY phone case made of denim

What we will need:

• denim;
• golden threads;
• decorative tape;
• sewing machine;
• scissors;
• ruler.

We cut out two parts, long and short.

The long part should taper at one end - this will be the smell of the cover covering the opening. We measure our mobile device, and taking into account the seam allowance, we make a pattern.

We process the top of the short part with an overlock stitch. We place a decorative ribbon.

We put two parts together and sew them.

Phone stand

You can make many phone stands with your own hands from scrap materials, such as paper, cardboard, plastic card, parts from the designer, office clips.
Let's focus on the version of the cardboard stand.

What we will need:

• sheet of cardboard.

We cut out a strip measuring 10 x 20 cm from a cardboard sheet. Fold it in half along the short sections. Let's draw a figure.

The fold line remains intact. The result is a comfortable and stable phone stand.

Phone charging case

In order to Charger for your mobile phone, it doesn’t get tangled or damaged, you can sew a case for it with your own hands.

What we will need:

• Main fabric (two pieces 27x15 cm)
• Pocket fabric (two trapezoidal pieces, 18 cm and 15 cm at base, 13 cm high)
• Non-woven fabric (two parts, 27 x 15 cm and 18 x 13 cm)
• Tape 25 cm
• Fringe with pompoms 76 cm
• Plastic eyelet for curtains

We glue the parts with non-woven material: the main part, the pocket part.

Sew the parts together. Fold inside out and iron.

Sew on: ribbon, bow.

Place the pocket on top of the main part, glued with non-woven fabric. Sew along the edges. The pom-poms are directed towards the center, the ends of the fringe overlap. Sew around the perimeter.
Fold and stitch the parts, leaving an opening for turning inside out. Turn it inside out, iron it, and then sew up the hole by hand. Install the grommet.

Leather Case

The leather case is practical, it is durable and does not wear out. Leather is expensive, so you can use old leather items, such as a bag, which will significantly reduce costs.

What we will need:

We measure the dimensions of the phone and use the pattern to cut out 4 rectangular leather patterns
and one strip. We cut the Velcro in the shape of a square or rectangle.

Sew rectangles on the wrong side.
Turn the product right side out and insert a smaller bag inside.

We bend the strip and connect it. We sew one side of the Velcro to the edge of the front side of the cover, and the other to the fastener.

Sew the clasp to the case in the center of the reverse side, folding the edges inward.

Leather sewing master class

Felt cover

Felt is a popular material for making covers.

What we will need:

• felt;
• floss threads;
• beads;
• satin ribbon;
• scissors;
• glue "Moment";
• sewing needle.

To make a pattern, transfer the outline of the phone onto paper. Add seam allowances.
We place the finished pattern on felt.
We cut out two identical parts along the contour.
We make decorations. Glue the finished applique onto one of the parts of the pencil case.

After that, we fold both parts and sew them together.

The presented master classes are popular and simple; create and you will be pleased with the finished product.

Video of sewing from felt

The simplest phone case

The easiest way to make a phone case is to make one out of a tie.

What we will need:

• tie;
• pins;
• threads;
• needle;
• Velcro;
• sewing machine.

Cut a wide piece from the tie. Calculate the length of the phone bag.
Steam the tie, then sew it together so that it is the same size along its entire length.
We fold the edges of the tie and sew them together. We do not throw away the excess part of the tie.

We lift the left edge of the tie up, sew along the edges, not forgetting to sew in the handle. We sew the case.

Felt phone case pattern

Felt is a useful material for creativity. Dense, it does not crumble during work; a wide variety of products are sewn and glued from it. Huge color palette of materials. Felt's properties are second only to felt. It is valued for its durability, and when using phone cases this property is important.

Felt phone case pattern

Fabric cover

What we will need:

• sock;
• sewing needle;
• threads;
• felt;
• scissors.

We draw a pattern based on the size of the phone. We cut off the elastic band of the sock and cut off the excess according to the pattern. Next, we cut the sock vertically.
We fold the two halves where the cuts are into triangles. We sew on these “ears”; the lining can be made from felt.

Phone case with retractable strip

What we will need:

• main fabric piece 10 x 30 cm;
• inner fabric part 10 x 30 cm;
• ribbon 22cm long;
• metal half ring;
• metal decoration;
• scissors;
• threads;
• pins.

Stepping back 8 cm from the top edge of the inner part, make a loop in the center slightly wider than the width of the ribbon. You can use a special stitch and foot in your machine or sew such a buttonhole by hand.

Insert the tape with one end into the resulting loop up 1.5 cm, to the short edge of the part. Sew along the outer edges of the loops.

Place the outer and inner pieces of the phone case right sides together, with the tape in between. Topstitch 0.5cm from the edges, leaving approximately 5cm of open seam. Cut the seam allowances at the corners at an angle.

Turn inside out, iron and sew up the open area.

Topstitch the short sides to the edge, or double decorative stitching on each side. At a distance of 1.5 cm from the edge, make a second loop of the same width as the first. The second loop is located closer to the opposite edge of the cover from the first. Pin the fabric around the loop.

Sew on a decorative element.

Fold the piece in half, right side out, and stitch along the sides at a distance of 0.5cm from the edge, starting the stitching 0.5-0.7cm from the top edge.

Pull the ribbon into the top loop, insert a half ring, fold 1 cm of ribbon and pin it with a pin. Stitch.

The pencil case is ready. You can add a magnet to the strap of your phone pouch.

Even if you are new to sewing: create, dare, don’t be afraid to create beauty around you.

Video master class on sewing a cover from foamiran

Photos of cases for inspiration