Msi factory settings. How to restore factory settings on a laptop. What are factory settings

Sometimes a computer owner is faced with the need to clean the system of various bugs that interfere with normal operation. This can be done by reinstalling the operating system, or using special utilities. But there is a method that has several undeniable advantages over them.

Resetting the settings to factory defaults will help restore the device to functionality in most cases, even if you cannot start the OS. This method is especially relevant for those who do not want to waste time reinstalling the OS.

When restoring factory settings, the OS will be reinstalled automatically. You will not need to enter the OS activation code again. The version of Windows that came with the laptop when purchased will be restored.

By rolling back the BIOS, you will eliminate the problems listed above. In this article we will look at how to return a laptop to factory settings and restore its functionality. There are several methods, which we will take a closer look at.



The option to reset settings may be needed if:


What are the factory settings?

Factory settings are set by the manufacturer for a specific computer or laptop model. They store BIOS settings and computer configuration parameters. This information is located in the device's dynamic memory, which is called CMOS.
All factory settings take up very little space and are separately powered - from a small battery located on the motherboard. You can reset the laptop parameters without access to the BIOS. To do this, simply remove the battery, wait 30-40 seconds, and insert it again.

After the process of resetting the BIOS settings is completed and the OS is reinstalled, you will receive the laptop in the same condition in which you bought it in the store.

It is worth noting that to successfully return the device to factory settings, in addition to CMOS, you need a Recover partition, which stores installation files and other necessary system information.

Video: Laptop factory settings

Where is Recovery located and its activation

A hidden partition on the hard drive that stores all the files needed to restore the system is called Recovery. It is created by default on all laptops, and is deleted or damaged in most cases as a result of incorrect user actions.

You can see where the hidden section is located:


There you can see the size that Recovery occupies on the HDD. Typically this is 20-25 GB of system information and installation files.

If you have a Toshiba laptop, then you have probably already noticed that on drive D there is a system folder called HDD Recovery. It also stores the information necessary to reset the system, so it cannot be deleted.

Activating Recovery starts the process of resetting user BIOS changes, restoring factory settings, and reinstalling the OS and system programs and drivers.

To activate Recovery, press a specific hotkey combination. This will allow you to enter the system menu, where you can select several system recovery options. It should be remembered that each manufacturer has its own combination of hot keys; below we will look at the most popular ones.

Restoring settings using hotkeys

In order to return your laptop to factory settings, you should remember several hotkey combinations. When the system boots, you should press hot keys to access the BIOS Setup menu, from where you can start the process of restoring parameters.

Depending on the computer manufacturer, hot keys and their combinations differ:

  1. Toshiba - depending on the model F8, or 0, or Fn+0;
  2. Sony - F10;
  3. Acer – Alt and F10 at the same time;
  4. HP, LG and Lenovo – F11;
  5. Samsung – F4;
  6. Fujitsu - F8;
  7. ASUS – F9;
  8. Dell - both Ctrl and F11, but in some models F8;
  9. Packard Bell - F10. If you have Windows 8 installed, you can use the power button when you log in. You should hold down Shift and at the same time select the “Reboot” menu item;
  10. MSI – F3, and on some models F11.

How to reset a laptop to factory settings via BIOS

Using hot keys, you can roll back custom system changes and return the BIOS to factory settings.

On the black screen that appears, select sequentially:

  1. option "Running the recovery center" for Sony, or "Troubleshooting your computer" for Toshiba, or "System Recovery" for HP;
  2. menu item "Load Defaults BIOS".

Depending on the manufacturer, the option name may vary: "Load BIOS Setup Defaults", "Load Safe-Fail Defaults", but the words "Load" and "Default" will definitely be present.

Preparation

Prepare for a factory reset:


After you start the process of resetting the settings, the process of collecting information and preparing system files will begin. This may take some time, so don't worry.

Recovery process

Once you start the recovery process, all actions will be performed automatically, without your participation. The computer may reboot if required by the installed software. During the process of resetting the settings, device drivers will be restored and standard system programs will be installed.

It is worth mentioning that it is not always possible to successfully reset the settings on a laptop. This is possible if:


What can you do if you deleted the hidden Recovery partition from your hard drive? You will have to look for a bootable settings disk or an image of a hidden partition for your laptop. They can be found on the Internet, and sometimes manufacturers offer to buy such disks for system recovery on official websites.
If there are no ready-made images for your laptop, you can ask the owners of a similar model on computer forums to create such an image for you. And to avoid this situation, you can create a bootable USB flash drive or DVD for your laptop yourself, which you can keep on hand and use when necessary.

>

I thought for a long time where to start today’s topic “How to restore factory settings on a laptop.” After all, this procedure is used for different purposes. Some are due to the fact that the computer begins to slow down due to a bunch of installed programs, half of which were also uninstalled incorrectly. Others because Windows is already so infected with viruses that there is no point in somehow restoring everything. Or it simply won't load. The third case is when the equipment is returned to the store under warranty from the store, and the service personnel need to reset Windows 10 to factory settings.

In the end, I decided to start without an introduction and get straight to the point.

How to restore a laptop to factory settings

The whole action is essentially not difficult, and now you will see for yourself. In the article I will try to mention all the major manufacturers. I hope I don't forget anyone.

Acer

The process can be implemented directly from Windows. To do this, you only need to install a special program “ Acer Recovery Management«.

We go into the BIOS, go to “Main“, where you should make sure that the “D 2D Recovery" function is enabled (Enabled).

We reboot, and at the same time press the hotkey combination Alt + F 10 until the application window opens.

Now select the option highlighted below in the screenshot. In other OSs, say (8/8.1), the phrase may have a different meaning: “Return to original state.”

We confirm our actions and wait for the work to complete.

This video is in case you have an English version of the utility.

Asus

I would like to note in advance that if the Asus system is being restored for the first time, then you should first deactivate “Boot Booster” in the BIOS.

Now we can begin. We start the laptop, press the F9 key. The button can be released after the “Boot Manager” window appears. Press Enter on “Windows Setup”.

We answer the very top line, as shown in the figure below.

And we wait for the end of the process.

Dell

Reset laptop to factory settings This company is also not difficult. For example, through “Troubleshooting computer problems,” as in the Toshiba option described below.

In order not to repeat myself, I will describe another method. An internal utility will be used here - Dell DataSafe.

a) Let's launch it. Select “Select another backup and additional options.”

b) Check the “Restore My Computer” option.

c) Set the value to “Restore without saving...”

d) We confirm our actions and wait for the end.

Toshiba

First we need to turn off the laptop. Then, holding down the “0” (zero) button, turn it on. You need to release the key only after when you hear a characteristic squeak! Next, follow the instructions on your computer screen.

But what to do if you have an outdated laptop model?

When turning it on or rebooting, press the F8 button on the keyboard and select the very first value.

In the list, click " Toshiba HDDRecovery" and then " Shut down ".

And again follow the instructions on the screen.

Samsung

It's not difficult here either.

a) Turn on the PC and click on F4.
b) Go to the “Recovery” tab (if you need to accept the license agreement).

d) Activate “Full recovery”. Don't forget to indicate backup.
d) Waiting for completion.

Lenovo

Inspect the laptop keyboard for “OneKey Rescue,” an inconspicuous small button. It is usually located in the upper left corner next to “Power On”.

Select the option of the same name in the utility.

We mark the item shown in the picture below.

At the end of the work, you should reboot.

MSI

We start the PC and press the F3 key on the keyboard until the already familiar “Windows Boot” window appears Manager". As in the case of Asus, we activate “Windows Setup”.

In the menu we find “MSI Recovery Manager” and click on “Ok”.

HP

This is my favorite manufacturer and in all my time I have only used their development of devices. That's me, by the way. ;)

a) Turn on the laptop and press the ESC key. Next “System Recovery“. You can simplify the situation and immediately use F11 when starting.

When the laptop starts to slow down terribly due to a bunch of installed and incorrectly removed programs, system garbage, a lot of temporary files and other unpleasant things, the most logical solution is to roll back the system to its original state. In this article we will figure out how to return a laptop to factory settings, using the example of all major manufacturers.
Many users will argue that it is easier to reinstall Windows. But a system rollback has the same consequences as a reinstallation, but it is much faster and does not require a boot disk. In addition, users are freed from the need to search and install drivers - after returning to the original state, they only need to reinstall the programs necessary for operation.
Each laptop manufacturer equips its devices with proprietary recovery utilities. However, working with them follows the same scheme and requires compliance with a number of rules:

  • During a system rollback, the adapter must be inserted into the laptop so that the power is not interrupted. Interrupting the rollback procedure risks causing more serious problems than just a lagging computer.
  • It is better to first transfer all important data from the hard drive to removable media - after successful recovery, you will return it back.
  • Some utilities can restore only the system partition (drive C:) or all partitions of the hard drive. It is recommended to perform a full recovery (this will delete all data from the hard drive, so move it to another location - see point 2).

How to return a laptop to factory settings?

So, if you want to get the system in the same condition as when you bought the laptop (without brakes, freezes, unnecessary programs and files), then choose a laptop from your manufacturer and follow the steps described.

Asus

Let's start with one of the most famous laptop manufacturers - Asus.

Returning an Asus laptop to factory settings:

You don’t need to press or enter anything else - the recovery utility will figure out how to return your ASUS laptop to factory settings.

By the way, pressing the F9 key when turning it on for the first time will not lead to anything, since by default the “Boot Booster” function is activated in ASUS laptops. It needs to be disabled in Bios. To do this, enter the BIOS, in the “Boot” item, set the parameter value to the “Disabled” position.

Acer

Let's continue our study of the topic with a story about how to return an Acer laptop to factory settings. You can perform this procedure from a running Windows (the utility is called "Acer Recovery Management") or through recovery tools.

Let's look at the second option:


On Windows 8.1, the recovery utility interface changes. Here you will have to select the item in the “Diagnostics” section "Return to original state". The rollback procedure is not much different, and all the steps are described in detail in Russian, so you will quickly figure out how to return an Acer laptop to factory settings.

Lenovo

To understand how to return a Lenovo laptop to factory settings, you first need to find a small “OneKey Rescue” button on the laptop case, which is responsible for launching the recovery utility.

Then follow these steps:



Wait until the rollback procedure is completed and be sure to restart your computer for the new configuration to take effect. The answer to the question of how to return a Lenovo laptop to factory settings has been received, but there are still other manufacturers, so let’s move on.

Samsung

It’s the turn of the South Korean manufacturer to answer the question of how to return a Samsung laptop to factory settings.

Resetting a Samsung laptop to factory settings:


You figured out how to return a Samsung laptop to factory settings, so you can forget about the need to reinstall the system.

HP

It's the turn of the next manufacturer: let's see how to return an HP laptop to factory settings.

Resetting your HP laptop to factory settings:



Now you know how to reset your HP laptop to factory settings. All that's left to do is wait until the factory reset procedure is completed, and start working with the laptop again.

MSI

Wondering how to reset an MSI laptop to factory settings?

Nothing complicated here either:


That's all you need to know about how to factory reset an MSI laptop.

Toshiba

Now let's figure out how to return a Toshiba laptop to factory settings. In the latest models, launching the recovery utility is quite simple.

Returning a Toshiba laptop to factory settings:

  1. Turn off your laptop.
  2. Press the number "0" and hold the key.
  3. Without releasing the key, turn on the laptop.
  4. When the computer starts beeping, release "0".

A program to restore settings to factory state will appear on the screen - you need to follow all the instructions of the recovery wizard.
But how to return a Toshiba laptop to factory settings if you have an old model? Here you will have to use the “Troubleshooting” section, which can be selected in the menu of additional boot options (F8 key when turning on the computer).


After a short wait you will see the system again in original factory condition.