As you know, due to the widespread use of high-speed mobile Internet, today many people use it not only on mobile devices and handheld gadgets, but also on laptops, even personal computers. In the latter case, Internet access is provided by connecting USB modems to computer equipment. And Megafon offers a whole line of such devices that allow you to access the Internet from anywhere in Russia where there is coverage.

It is worth noting that the modems offered by the Megafon operator are programmed to work exclusively with this operator, and if users need to change the provider and use the device with its SIM card, any attempts will fail. Therefore, the question of how to flash a Megafon modem for all SIM cards is so popular today.

In general, Megafon offers fairly loyal and comfortable conditions for using the Internet, which should not force people to make their choice in favor of other operators. However, such a trend is observed today, and we want to understand how it is possible to perform such an operation.

How to flash a Megafon E173 modem for all SIM cards

We will consider the information using the example of the popular USB modem model E173.

Instructions for configuring the device are as follows:

1. Install a SIM card from another operator, which you plan to use in the future to gain access to the Internet, into the Megafon modem.
2. Connect the modem device to your computer (via USB port).
3. Install the standard modem driver, which is located directly on the device. The installation should start automatically. If this does not happen, go to the modem folder in “My Computer” and run the Autorun.exe file.
4. After installing the driver, the program interface for connecting to the Internet will launch. You can close it.
5. Now you need to install the firmware update, which can be downloaded with all the necessary files in the archive. Unpack the archive and run the file “E173u-1Update_11.126.85.00.209_B427” as an administrator (right-click on the file and select “Run as administrator”).
6. Accept the terms of the license agreement by checking the checkbox located first in the list of two available options.
7. Click on the “Next” button, which will become active after placing the marker in the checkbox.
8. After installing the firmware, run the “Huawei modem unlocker” file located in the unpacked folder.
9. Make sure that the modem connected to the computer is identified in the “Detected Modem” field. If this does not happen, you need to click on the “Refresh” button.
10. Next, click on the “Calculate” button.
11. The next step is to click on the “Unlock” button.
12. Wait for the unlocking process to complete. You will be notified of this by a message in the Lock Counter line, which should say: “10 – Left of 10 attempts.”
13. The program can be closed.

Starting a modem with a “foreign” SIM card

After completing the flashing procedure, you can begin checking the device for functionality with a new card from another operator. The check is performed as follows:

1. Run a program optimized for working with the Megafon modem (installed along with the device driver).
2. Make sure that in the upper left part of the interface there will be information about the operator whose SIM card is installed in the modem. For example, it could be Beeline or MTS.
3. Click Connect and connect to the Internet.

If you suddenly have problems connecting to the Internet, you can use a third-party driver to operate the modem. You can install it from the same folder that you unpacked from the provided archive. You should run the “Setup.exe” file and install the appropriate program. In the program, you need to select the operator that interests you and click on the “Connect” button to connect to the Internet.

Please note that the information herein is provided for informational purposes only. The site administration does not bear any responsibility for its use.

Modern technological inventions make people's lives easier in many ways. For example, modems from different companies and operators help each user gain unlimited access to the World Wide Web anywhere and at any time. However, many are faced with the problem of blocking a USB device and the need to independently flash it for any SIM card. Let's figure it out - why do you need firmware for the Megafon 4g m150 2 modem for any SIM card?

Why is firmware needed?

How to flash a Megafon 4g modem for all SIM cards and most importantly - why? This process involves installing a special set of programs that are necessary for the correct operation of equipment with SIM cards (if we are talking about a USB device). In the case of USB gadgets, such software is installed automatically, without the user’s direct participation in this process.

However, in the case of Megafon devices (and other operators), they are flashed and locked to “native” SIM cards. In this case, manual flashing is needed, which will allow you not to limit yourself in choosing an operator. How to reflash a Megafon 4g modem for SIM cards of all operators?

Firmware process

The firmware of the Megafon 4g m150 1 modem (and other Huawei models) must be carried out in accordance with the following instructions:

• First, you need to download the archive from the link: https://yadi.sk/d/-KsvpaOgfbCAX. At the same time, insert into the PC/laptop a device with a SIM card of the desired operator. Open the downloaded archive.

• Go to the folder “Modem Firmware” - Driver HUAWEI.

• In the specified folder we are interested in the following driver files:

Install DriverSetup and the following files in accordance with your system. If it is 64-bit, then install devsetup64 and DataCard_Setup64. If it is 32-bit, then we also install the corresponding files. The installation is carried out according to an algorithm well known to every user.

• Let's go back and run the Dashboard HUAWEI.

The specified program must also be installed. Upon startup, a welcome window will appear:

The installation process is also standard. If difficulties arise, you can familiarize yourself with the information in the text document. MUST READ. All the necessary instructions are there.

• Next we move on to Soft HUAWEI Modem 3.0.

Same standard installation mode. After its completion, a program shortcut will appear on the desktop:

When you tap on “My Computer” you will see that the icon of the connected device has now changed:

• Launch the installed program:

Upon startup, a message will appear warning you that: “Only the specified SIM card can be used on this device.”

This message can be regarded as a residual reflex of the operator. It does not pose any obstacle to accessing the Internet with another SIM card. Click OK and tap on “Connect”. Authentication is in progress.

If the exact sequence was followed during installation, the Internet will successfully connect with any inserted SIM card. The firmware is completed.

In this article you learned how to flash a Megafon 4g usb modem for SIM cards of all operators. If you are interested in this topic, then the remaining articles may also be useful to you:

We invite you to watch the video:

The realization that the time has come to flash a modem for all SIM cards comes at the moment when the Internet tariff of your cellular operator, no matter which one - Megafon, MTS, Beeline or Tele2 - ceases to suit you. Then the fact is discovered that other SIM cards do not work with it. Today we will continue to “torment” a mobile 3G modem - in this article I will show a universal way to flash a Huawei modem for all SIM cards of any cellular operator. It fits most models sold in showrooms today. Go!

We go to the website dc-unlocker.com and download the application for flashing the modem from these developers.

If our modem is on the list, feel free to connect it to the computer and launch the program.

Megafon modem firmware for all SIM cards

First, for convenience, install the Russian language in it. After that, we set “Huawei” as the manufacturer, and either indicate the model number yourself or leave auto-detection.

Click the icon with a magnifying glass, after which the program will determine all the current data about the state of the modem firmware. We are interested in two points:

1. SIM blocking status - if it is blocked, then it is our client.
2. Code entry attempts - the remaining number of flashing attempts.
   Initially there are 10 of them, if there are fewer, it means someone has already tried to flash this modem.

If the device is blocked and there are still attempts to flash the firmware, then we return to the site and go to the “Buy Credits” section to pay for the program.

This will be both payment and registration - you need to select a payment method, enter your data and the number of credits to be purchased for the firmware. You can find out how many credits are needed for our operation by following the link “How much do I need?”

Since our model is already old, in this situation, to unlock it, you will need the “Generate Huawei modem unlock code by IMEI” item - at the time of writing, it costs 4 euros. For new models, we look at the option “Generate Huawei modem unlock code (AuthVer 3) by IMEI”, it is a little more expensive.

Select the desired item and return to the page to make a payment. Once the funds transfer is confirmed, you will be redirected to the next page. where the login and password will be indicated to connect to the site through the program. We return to the application and enter them in the “Server” section

You can also click on “Check login” to ensure that the entered data is correct and the balance of credits in your account is correct.

We wait for some time - and voila, an inscription about the successful firmware of the modem for SIM cards of all operators will appear in the program message window.

I will answer all questions in the comments!

If the article helped, then in gratitude I ask you to do 3 simple things:

1. Subscribe to our YouTube channel
2. Send a link to the publication to your wall on a social network using the button above

The Megafon company is constantly expanding its capabilities and today offers customers multifunctional 3G modems that are programmed to work exclusively with SIM cards of this mobile operator. If the user needs to rearrange the SIM card of the Beeline or MTS operator, then he needs to change the specified parameters in the MegaFon modem. This process allows you to deactivate the current software.

Popularity of 3G modems from MegaFon

The company has taken a strong position as a leader in the production of mobile modems that provide unhindered connection to the Internet at any time. The most popular models of 3G modems are E1550, E352, E173. Each model features an ergonomic design and data reception speeds of up to 14.4 Mbit/s. The developer has provided maximum convenience for customers.

To get started, the user will not have to configure anything, because all preliminary parameters for accessing the Internet are already configured in the modem. By connecting the device to a computer, the system will program the necessary software for further operation. The client will be able to freely access the network and track statistical indicators - the amount of information downloaded during the connection and the connection time.

Fast firmware for MegaFon modem

Reflashing the modem is a fairly simple process.

To get started, you need to prepare the following materials:

• 3G modem;
• laptop or PC;
• Software for a specific gadget model.

Instructions for successfully flashing a device include the following steps:

1. Initially, you need to download the MegaFon-Internet program from the official website of the service provider.
2. You also need to install a firmware modulator-demodulator: the original version of the Huawei firmware, an application for generating IMEI passwords for a specific device model, as well as the Manager connection program.
3. Then you need to write off the existing code on the MegaFon modem. This process is carried out by pressing “CALC”.
4. After pressing this button, a message like this will be displayed on the screen: Flashing: “66727188” and Unlocking: “37009466”. We choose the 1st option.
5. Then select the flashing file downloaded from the official resource and run it. The system will request a FLASH password, which will be generated by the IMEI password program.
6. When the system completes installation, you need to remove the modem from the PC slot and connect it again. This completes the preparatory work.

Let's start installing the modulator-demodulator:

1. The first thing you need to do is flash the Manager connection of the 3G modem (Dashboard). This action is performed through the file “Mobile_phone_RePartner_dashboard.exe”.
2. Then we install the program for working with the Huawei Mobile Partner modem, which can be downloaded from the official resource.
3. We activate it and follow the simple instructions to reinstall the software version.
4. We reboot the modem and computer, after which we evaluate the quality of the new firmware.

Important! Before starting work, you must disable all programs on your PC and close your browsers. It is also strictly forbidden to turn off the computer while updating the modem software version.

Modem firmware for all SIM cards

The mobile operator MegaFon blocks (locks) modems, which makes it impossible to use SIM cards from other operators, such as Beeline or MTS, on your device. However, the inquisitive minds of users have found a way that will allow them to unlock the modem without much effort.

So, for the workflow you need to prepare the following:

• download firmware file;
• Software for flashing the device;
• install a password calculator for IMEI.

Important! Any manipulations to unlock the software on the modem can only be performed with the SIM card removed.

To install the firmware you need to do the following:

1. Download the software for your device model from the link.
2. We launch the installed file and enter the password that needs to be generated on the IMEI password calculator (follow the link).
3. Then we launch the software flashing program.
4. Enter “Unlock Password” and confirm the action by pressing the “Ok” button.
5. Ready!

After these steps, reboot the modem and check the functionality of the device.

Mobile operators in Russia today offer not only mobile communications, but also mobile Internet services, thanks to which we can always be on the Internet if we are in the coverage area of ​​cellular towers. Cellular operators also offer mobile Internet services for computers through USB modems and routers.

Operator SIM cards are installed in modems and routers and users receive access to the Internet from the operator whose SIM card is installed in the modem. You cannot install a SIM card from another operator if your modem, for example, is from Megafon, which causes some indignation among ordinary users who want to be able to insert a SIM card from another operator into the modem and use its services.

Let's take a closer look at how to flash a Megafon modem yourself.

How to reflash a Megafon modem

To reflash the Megafon modem, you need to:

• Have the modem itself from Megafon, which was produced by the Chinese company Huawei, as well as a computer or laptop.
• Download the necessary software. This includes the Megafon-Internet program, which can be installed from the modem itself when connected, new clean firmware from Huawey, an NCK and FLASH generation program that recognizes passwords from the IMEI of the device, and a program for connecting manager mode. You can download all these programs on this site.

After this, we proceed directly to flashing the modem from Megafon:

1. We close all programs on the computer so that they do not load the system and do not take up memory. When flashing the modem, you will need all the computer's performance. You should also disable antiviruses, which may block firmware files or even stop the flashing process.
2. We insert the modem without a SIM card and a flash card into the port.
3. Launch the UNLOCKER program. In the program, enter the IMEI of your modem, which can be found under the cover of the device. Press the “CALC” button.
4. The program will give you two codes that you need to save.
5. We launch the flashing program and follow the instructions. At some point the program will ask you to enter a code. We received this code from the previous paragraph of the instructions.
6. We remove the modem from the laptop or computer and reconnect it to the port.
7. We launch the program from the “Mobile_phone_RePartner_dashboard.exe” archive and indicate the required code received earlier during the installation process.
8. Launch the “Huawei Mobile Partner Rus” program and install the firmware.
9. After this, you can complete the modem firmware by rebooting the modem and computer or laptop.

After flashing, you need to check the modem for functionality. We take a SIM card from another operator and insert it into Megafon’s modem. If the connection works, then the flashing was successful. If there is no connection and the modem gives an error, then you need to repeat the flashing process again, following the instructions.