Active advertising systems frame or iframe. What is an iFrame? Web Analytics and Framed Page
12/15/16 7K
Element
Frames
What does it do
How to insert a page into an HTML page? To do this you need to use
Display
Display block.
Example code
Powerful yet easy to use
Back in the bad old days there was a lot of web design elements that spoil the life of every developer. They were almost always a bad design approach. Fortunately, element has been deprecated in HTML5. But
Similarities and differences
Both of these elements allow you to create a separate HTML document. A link to the content of the document referenced by the current web page is specified in the src attribute.
The main difference between
The video is clearly on the HTML page and not in a separate panel. element broke this paradigm and allowed the document to exercise control over the browser window, breaking it into several small panels (frames), each of which displays a separate document. All other differences between and follow from this basic difference.
Don't remake frame-based layouts with iframes
Someday you may be faced with the task of updating an old website that was built using frames. You might want to use and a fixed layout width to recreate the same nightmare of independent panels and sills. But you won't be able to use the target attribute to open a link in a separate frame. You can start looking for JavaScript solutions. Please, do not do that.
Good (and terrible) uses
There are several valid use cases to create an HTML page:
embedding third-party media content;
embedding your own media content through a cross-platform document;
embedding code examples;
embedding third-party “applets” as forms of payment.
Here are some terrible use cases: :
Photo gallery;
forum or chat.
If you need to embed independent, pre-existing HTML documents into the current one, use . If you're building everything from scratch, there's no reason to split the page design into multiple separate documents. Especially if they aren't actually independent pieces of content.
Sets a number of restrictions on the content loaded into the frame. Set before how to create an HTML page.
scrolling
yes no auto
Determines whether to show scrolls in the frame or not. Deprecated in HTML5. Use CSS instead.
Name
Name
Specifies the name of the frame.
Align
left right top middle bottom
Determines the frame's alignment relative to surrounding elements. Is outdated. Use CSS instead.
frameborder
yes (or 1) no
Used to enable the display of a border around the frame. Deprecated in HTML5. Use CSS instead.
longdesc
URL
Used to specify the URL of a page that contains a long description of the contents of the frame. Is outdated. Use CSS instead.
marginwidth
pixels
Used to control the width of the padding from the content to the frame border. Is outdated. Use CSS instead.
src
URL
Specifies the document URL to display in the IFRAME.
vspace
pixels
Sets the vertical margins from the frame to the surrounding content. Is outdated. Use CSS instead.
width
pixels %
Defines the width of the frame on an HTML page.
This publication is a translation of the article “ ", prepared by the friendly project team
Affiliate Iframe is a type of advertising that does not in any way affect the appearance of your site. That is, there will be no banners, pop-ups or other annoying window visitors. You will be paid precisely for visitors to your site. Accordingly, it is desirable that the attendance be high. Earnings also depend on the place where the visitor came to you (search engines, bookmarks, etc.). Of course, targeted visitors, that is, those who came from search engines, pay the best. It also plays a role from which country the visitor came from.
Let's look at the pros and cons of this type of advertising:
Pros:
Easy to install. You just need to install the affiliate code on all (or not all) pages of the site.
Passive income. That is, for each user who visits your site, money will be credited and you don’t have to do anything.
No annoying banners or .
Most often, any site is accepted.
They accept traffic from ATS, autosurfing, axleboxes, and so on.
Referral program.
Minuses:
Viruses. Some affiliate iframes (specifically advertiser sites) contain viruses, but most often you can ban a viral site from your affiliate account.
Redirects. Sometimes redirects to porn sites occur.
List of iframe affiliates:
- the oldest affiliate program of its kind and the best. You can ban sites that have viruses. Also, when adding a new site, I advise you not to check the box “Post resources on my site that have not been verified by moderators.” The income will be less, but there will be no viruses, although if your site was created only to make money, then it is better to increase the income. Traffic cost 0.50 - 0.70 $ per 1000 unique visits. Any sites are accepted. I consider the main advantage over other similar affiliate programs to be immediate payments upon request, that is, you just need to order a payment (there is no minimum wage) and it will arrive within one minute.
— in addition to iframe advertising, there are other formats, for example, popunder. Payment: clickunder - 1wmz for 1000 unique transitions (all countries except China), popunder - 3wmz for 1000 unique transitions from Russia and 0.8wmz for other countries, hidden transitions - 1wmz (all except China) and iframe - 0.5-1.5wmz per 1000 visitors (price can be adjusted). The minimum amount for withdrawal is 3wmz upon request within 48 hours. Auto payouts work the same way. Referral program - 5%. The system has an ICQ robot (88-25-28) that will tell you about your statistics, transitions, etc.
- old iframe affiliate program. They take the quality of traffic and the activity of webmasters very seriously. If you are not active, your account may be deleted. For your site to be accepted, traffic must be at least 100 visitors per day. The minimum payout amount is $1. Payment for 1000 uniques - 0.7$ from Russia, 0.3$ from Ukraine, 0.25$ Belarus, 0.05$ other.
Personally, I don’t collaborate with iframe affiliate programs, but it’s just right for beginners.
Hello, dear readers of the blog site. Today we will talk about frames in HTML. It’s clear that we’ll start from the beginning, namely with what kind of animal this is. We’ll also talk about the present (Frame) and future (Iframe) of these elements in the current version of the hypertext markup language and in the new Html 5 standard with .
At the end of the article, after a detailed description of the process of creating built-in frames and their classic structure in Html code (already rarely used), we will touch on the relevance of building a site on them, and also discuss possible ways of using them in the current period of time using the example of my blog.
What is it and how does Iframe differ from Frame?
What is it? It turns out that they can be used not only on websites, but also in any applications to programs, but they differ in that the window of a web page or application will be divided into several areas, into each of which a separate document is loaded. Moreover, these frame areas behave independently of each other.
Probably the most obvious example of their use, which almost all of you have encountered, are the so-called help files that many programs installed on your computer have.
The file with the help menu is loaded into the left window, and the document corresponding to the selected menu item is displayed in the right window. It is noteworthy that this structure allows you to avoid re-loading the file with the menu into the left window when opening a new document in the right one. This is exactly what it consists of main advantage of using frames in HTML.
Actually, the very name of these elements should be interpreted as an independent window. With the help of frames, we have the opportunity to split one large window into several fragments, which in turn can serve as receivers for separate documents independent of each other (pages, texts, images, videos, etc.).
How is a frame structure created in hypertext markup language? If we talk about the Html 4.01 standard (according to the classification), which is the main one at the current time, then three elements are used for this - Frame, Frameset and Noframes.
Iframe - built-in frame in the Html 5 standard
If we talk about the Html 5 standard (our future, some elements of which are already supported by many browsers), then there will no longer be Frame, Frameset and Noframes tags, as well as the classic frame structure; instead, there will be one single Iframe tag (embedded frame) , which we’ll talk about at the beginning, and then we’ll turn our attention to the classic scheme from version 4.01, which is actually in use now.
Iframe, unlike the classics discussed below, does not require replacing the Body tag with Frameset tags. Those. this tag can be inserted on regular pages, for example, inside a paragraph or anywhere else. At its core, this element is very similar to the Img tag we have already considered.
It is an inline element with replaceable content because it behaves exactly like an inline element, but it displays extraneous external content. There are only four such elements in the HTML language - Img, Iframe, Object and Embed. Therefore, our hero implies the presence of an external file that will be loaded into an area whose size is set using the attributes of this tag.
That. An Iframe is a sink element into which an external object (such as a video) is loaded. And to indicate the path to this file, which should be loaded on the page, use the special Src attribute. But unlike Img, the Iframe element is paired, i.e. there is also a closing tag:
This example shows the output on a Youtube video page using an Iframe. In order to limit the area of the frame (window) where the external file will be loaded, attributes are provided Width and Height, whose values are specified in pixels:
Those. this tag creates an area into which some external object is loaded (it doesn’t matter whether it’s from your site or from another resource). The width and height of the area are specified using Width and Height, and the Src attribute specifies the path to this object.
The Iframe element inherited all these attributes from similar inline tags with replaced content (such as the Img already mentioned above). Well, he also took attributes from the pictures Hspace and Vspace, which allow you to set indents from the borders of the frame to the text that wraps around it.
It is also significant that the alignment of the built-in frame is carried out in exactly the same way as we could see when studying images in Html - . All the same Align, but for the Iframe tag with possible values Bottom, Top, Middle, Left and Right.
But this element also took several attributes from the Frame tag from the classic frame structure, which we will talk about in great detail below in the text. These attributes include Name, the value of which can be used as a value so that the document you need when clicking on a link opens in the window of this frame (read more below).
Also in Iframe, the Frameborder attribute migrated from the Frame tag, which has only two values - either 0 (the frame around the frame is not displayed) or 1 (the frame is visible). The default value is Frameborder=1, so to remove it you will need to enter Frameborder="0":
The Scrolling attribute has also been transferred from Frame to this element, which has a default value of Auto - scroll bars in the frame will appear as needed when the content is larger than the size of the window intended to display it.
Well, the Marginwidth and Marginheight attributes also moved from the Frame element. They will be discussed in detail below in the text, but in a nutshell - they allow you to set the indentation in width and height from the edges of the frame to the content that is placed in it.
As I already mentioned, a clear example of using an Iframe is:
By inserting an Iframe directly into a web page, you will receive an output of a video from YouTube. We conclude that this element is a cross between inline elements with replaced content and, in fact, classic frames, which we will now discuss.
Frames based on Frame and Frameset tags - their structure
So, creating a classic frame structure begins with what you write in the Html code instead of the opening and closing Body tag, which usually should be present in any document, replacing it with an element-based container Frameset.
The fundamental point is that the Body element cannot be used in this case - either Body (for a regular document) or Frameset (when creating a document frame structure):
Each frame that we create inside the main one is created using a separate element Frame. This tag is single and in it we set the path to the document that will be loaded into this window.
The third element that we have not yet touched upon is Noframes. It is paired and allows you to write some text inside, which will be processed by the browser and displayed on a web page only if this same browser (or other display device) does not support frames. This can happen, for example, if you are using a browser for mobile devices.
Usually in Noframes they add not only information about the current situation with the impossibility of processing the frame structure, but also add the ability to go to other pages where you can continue working without using them. It’s difficult to say anything else about him, so let’s continue.
It turns out that the Frameset element, used instead of the Body tag, takes up all the space allocated for the viewing area, and frames will be created inside this area using individual Frame elements. In this regard, the question arises - how to divide the viewing area between separate windows or, in other words, how to set the size of each of them.
This is done by adding the appropriate attributes to the Frameset element. There are two of them - Cols and Rows. Cols sets the division of a large window into vertical frames or columns, and Rows allows you to divide it into horizontal windows or rows.
Creating a structure based on Frameset and its Cols and Rows attributes
The values for Cols and Rows of the Html Frameset tag are numbers separated by commas (without spaces). These numbers set the proportions of the windows that we want to get as a result. Therefore, no matter how many comma-separated numbers are written in Cols or Rows, the number of frames we have will be the result.
For example, using this notation we will get three vertical columns whose width will correspond to the proportions 2:5:3.