Almost all modern laptops, tablets, and phones support WI-FI and can work in wireless networks. Therefore, almost every apartment uses its own wireless network. Basically, home and office local networks, which have access to the Internet from various devices, are created using a router. In this case, a gateway (router) is installed at the entrance to such a network. The router is configured via the web interface. When setting up a router, it is very important to correctly configure the network security settings and know how to set a password for the router and for your WI-FI network. To enter the router settings menu, you need to know the password to log into the router. If you have not changed the password yet, then this is the default password and you can find it out from the instructions or look at the bottom cover of the router. The table below shows standard router passwords for the most common models.

How to view the password on a router

To find out the factory password of the router, you need to turn the router over and look at the bottom cover for the default password and login value of the router.

How to protect your router with a password

To protect the router, the password on the router is changed. This setup is carried out after connecting the router to the computer and configuring the router. In this article we will consider setting a password using the example of the D-link DIR-300 router (router), as the most common one. If you have a router from other manufacturers, for example Asus, Zyxel, TP-Link, Neatgear, then setting the password is done according to the same principle and it will not be difficult to figure out how to enter the password on the router.

All settings made can be easily changed or deleted if you have access to one of the computers on the local network. In addition, if a VPN server is configured on the router, then access to your local network can be obtained via the Internet. Having access to the router, you can easily access the data of all computers on your network. Therefore, it is recommended to change the factory settings and change the password used for authorization in the administrative panel of the router. You need to know how to password protect your router. This way you can protect your router from unauthorized access and reduce the risk of your router being hacked.

How to password protect a d link router

To protect your router, you need to change the default factory password of the router to your own. In the example we will use the D-link DIR-300 model. First, you need to type the router address into the Internet browser you are using. In our case, enter 192.168.0.1.

In the authorization window, you need to enter the login (UserName) and password (Password) of the router in the appropriate fields. By default, the password for the d link router is entered as admin, and the login is also admin. When you enter these values, you need to click the Log in button.

In the router management window, you need to select Maintenance from the top menu. And then from the submenu you need to select Admin Setup. In the window that opens, you need to find a field called New password and enter a new password value. Then duplicate the value in Confirm password. To save changes, click Save Settings.

If you want, you can enter a new login value instead of the standard admin. After this setup, your router will be protected from third-party connections and interference. It is better to come up with a password that is complex enough to be difficult to guess. To do this, enter a value consisting of at least eight characters, and use numbers, capital and small letters of any alphabet.

How to change the password on a router

If you do not know how to change the password on the router, then you need to follow all the steps given above to set a password. In this case, you go to the router settings not using the factory password, but using the one you set earlier. You just need to write a new password instead of the old one in the corresponding Admin Setup menu window and save the settings.

Resetting your router password

It often happens that someone has forgotten the router password or lost it. Perhaps, in your case, you got the router from another owner and you don’t know how to find out the password. In addition, some providers, when delivering their router, set their own password on it in order to protect the router from interference by strangers. Then, without knowing the password, you will not be able to access the router settings. In this case, all that remains is to reset the settings to default values. You need to know how to reset your router password.

If you need to reset the router settings to factory defaults, this can be solved by simply pressing the router’s Reset button. All routers are equipped with such a button. The button is a small hole on the back cover of the router. The button itself is located in this hole. There is usually a Reset inscription above the hole. This non-standard button design is made specifically so that you cannot accidentally reset the settings. Although accidental pressing of the button is protected, it is advisable to cover the button hole with tape, just in case.

First, you need to supply power to the router, then press Reset with a convenient tool (a paper clip, a pen rod) and hold the button pressed for about 7 seconds. But it's better to wait ten seconds. After clicking, the router will reboot and you should not turn it off for several minutes. After this, you can use the default password to enter the router menu. You can find out what the router's default password is from the instructions for your router model, or from the factory password table, which is given in this article.

Perhaps you need to reset the values ​​to factory settings not because you do not know the password, and you have access to the router menu. Then you can reset the settings from the router menu. To do this, you need to open the Tools item in the router menu and find a button there called Settings Reset. After pressing the button, your router will reboot. You need to wait about two to three minutes and the router settings will be reset.

You should also be aware that there are cases of spontaneous reset of settings that occur during severe network fluctuations. In this case, the Internet may turn off for a while and the router may reboot. In this case, it may happen that the router does not accept the password if the settings are reset and you enter your set password value. Then you need to enter the factory password. To combat this problem, it is recommended to use uninterruptible power supplies.

How to password protect a wifi router

Using Wi-Fi wireless communication is very convenient and thanks to this connection, you get access to the Internet from anywhere in the apartment. However, do not forget that using a wireless connection is more dangerous than a wired one. After all, the signal of your home Wi-Fi network can be caught by neighbors or someone on the next floor. In this case, an unauthorized person can enter your network and gain access to information on your computer.

Many users do not initially think about the safety of data on their computer and whether it is easy to access the computer from the outside. Therefore, not everyone sets restrictions on access to the local network. The consequences of such neglect are noticed only when there are clear signs of outside interference in the system. To restrict unauthorized access to the network, you need to set a password for the Wi-Fi network. Setting such a password is done through special settings in the router menu.

There are several ways to restrict access to a wireless network. The easiest way to set up is password access. To do this, you need to know how to change the password on the router. In this case, to access the network, all users must enter an access password.

To make the necessary settings, you need to connect your computer to the router and go to the router’s web interface. We type the address of the router in the address bar of the browser as in the picture below.

If the address is entered correctly, the authorization page will open. You need to enter your password and username in the appropriate fields. If you have already changed them, then enter your values, and if not, then the factory values, which are the default. The standard password for a d link router is admin.

When you get to the router settings page, find the Setup item in the main top menu. In the left menu, open the Wireless Setup settings to configure your wireless network.

Before setting up a password on the router, you need to select the manual setting option or using the setup assistant. To select the appropriate option, you need to press the corresponding button.

How to password protect a Wi-Fi router using the setup assistant

If you decide to set a password using the assistant, then after clicking on the corresponding button you will be taken to the message page. The message states that the setup is done in two steps. First, general setup is carried out, and then a password is set. To continue setting up, click Next. If you decide to cancel the setting, click Cancel.

On the next settings page you will be asked to select an option for assigning a password. You can assign a password manually or automatically. Select the option as in the figure below if you want to come up with a password yourself.

If you doubt that you can come up with a good password yourself, you can select the automatic assignment option. However, in this case it will be more difficult to remember. It is best to leave the option to select WEP encryption enabled. This will use a more advanced encryption security method.

If you choose to set a password automatically, in the settings window you will see the value of the set password and some parameters of your network. All you have to do is write down the password and click Save. If you want to go back a step, click Prev.

If you set the password yourself, then on the settings page that opens you need to enter the invented Wi-Fi network password in the corresponding Network Key field. The password length should not be less than 8 characters and it is recommended to enter letters and numbers to ensure password strength.

When you enter your password, remember or write it down and click Next. In the next window, click Save and your password will be set.

Setting a router password manually

In order to set a password manually, you need to select Wireless Setup in the router menu, and click Manual Wireless Connection Setup there. A page with settings will open in front of you, where you need to find Security Mode and select a position from the list, as in the figure below. In the same window, enter your Wi-Fi password next to Network Key.

To complete the installation and save the settings, click Save Settings. When connecting computers, netbooks, and other devices to your wireless network, you will need to enter this password to enter the network.

How to find out the password of a Wi-Fi network router

Sometimes it happens that someone has forgotten the password for their wifi router and cannot log into the network. Let's say you forgot to write down your network password. Perhaps, if the devices you use are connected, you will not need to enter a password yet. But when connecting a new device, you will definitely need the password for your network and you need to know how to recover the password on the router. This problem is not at all difficult to deal with, and it only requires a few simple steps. To recover a forgotten password, you need at least one computer to be connected to your network. Then you can go to the network settings from it. You need to turn on your computer and click on the network connection icon, which can be found in the lower right corner. Select the network management item as shown in the figure below and click on it.

In the Network Control Center window that appears, you need to find the item on the right that is responsible for wireless network settings, as in the figure below, and click on it.

In the new settings window, you need to right-click (right-click) on the connection and select Properties in the context menu that opens.

After this, you need to open a tab called Security, and then look in the corresponding field for the value of your password (security key). It is possible that you will only see asterisks (hidden characters) in the password field, then you will need to enable the option below by checking the box next to display hidden characters. After this, you will definitely see the value of the network password and can write it down so as not to forget.

Hello everyone! In this article I will tell you how to change the password on a wifi router .

Wi-Fi technology has now become one of the most common ways to access the network, since the convenience of such a network is that various devices can connect to the Internet wirelessly.

True, if the password has not yet been set or it is too simple, then you should take care of the security of the network, because in this case almost anyone, including a child, will be able to connect to it.

But if a person is very generous and does not feel sorry for anything for others, this is his business, but then he will have to put up with the fact that the network works slowly.

I decided to make my network more secure, so now I’ll tell you how you can set a password for your Wi-Fi. You can do this using my example.

How to change the password on a Wi-Fi router - Where is the Wi-Fi password set?

A router or router is one of the most popular devices for this type of network. And I will consider setting a password on the router.

There are quite a few different manufacturers and models of such devices, but they are designed approximately the same. I set a password on the D-Link DIR-300 router.

The settings interface can be opened on any device connected to this network through a browser. I did this using a computer, since it connects to the network via cable (if the connection is wireless, then if you change the password, the device will automatically disconnect from Wi-Fi).

To open the settings I needed, I wrote the IP address of my device in the address bar of the browser. You can also use standard addresses used by the manufacturer for this, but this does not always work (depending on the model and the manufacturer itself). It may also be that the interface address is located on the device itself on a special sticker or is indicated in the instructions. You can type the router model into a search engine and try to find the information you need.

Login to router settings

Having determined the required IP address to go to the settings, I wrote it in the address bar of the browser.

Then a special window appeared where I entered my login and password.

Just like many routers, my username and password are “admin”

However, if this option does not work, then, most likely, this device requires different data (depending on the router) or they were changed earlier.

If the username and password are unknown, then you can try searching on the Internet, or, if nothing was found, reset the settings to factory settings.

Setting a Wi-Fi password

After entering my username and password, an interface opened where I found “Security Settings” located in the advanced settings section. The interface may look different on different routers, but the items and sections will be approximately the same.

Then under Network Authentication I selected WPA2 as it is currently the most secure authentication method for the network.

After that, I wrote a new password in “PSK Encryption Key,” which I previously selected so that the likelihood of it being hacked was minimal. It is better that it contains both letters and numbers.

Now you need to configure WPA encryption, for which I selected the AES algorithm in the field of the same name, because among the others it is more reliable.

Before clicking "Edit", I double-checked all the entered data and made sure everything was correct. I then restarted the router since a reboot is required for the changes to take effect.

Checking Wi-Fi operation

I reconnected all devices to Wi-Fi, only now entering a new password.

But some people gave an error when trying to connect. Then I deleted my network from those saved on the device and, after waiting for the name to appear in the list again, entered a new password in the field.

Conclusion

So I looked at the question - how to change the password on a wifi router. Everything is quite easy and simple. So in my example, you can change the password. Thanks everyone, bye everyone!

How to change the password on a wifi router?

The security of a Wi-Fi network depends on a securely chosen password. You’ll say “what’s the difference, unlimited Internet, the speed is enough, there’s no point in fiddling around to figure out how to change the password on a wifi router.”

Today, home networks play an important role in the lives of modern people. With their help, users combine computers into groups, which allows them to exchange information and also play joint games. But, do not forget about the security of such groups, because the radius of the access point is quite large, and anyone can connect to the router, including attackers. Therefore, it is recommended to install a complex key.

If friends and neighbors simply use the Internet, and at a time when Internet access is not needed, this is not so scary. But people think about the option “how to change the password on a wifi router” after unpleasant situations. Starting from the need to quickly download an array of files during peak hours, when the ping exceeds 10 milliseconds, and ending with the banal “they got into the wrong settings and ruined it.” In addition, keep in mind that the owner, not the attacker who connected to the router, will be punished for illegal actions using a personal IP address.

To prevent this from happening, take the time to find out how to change the password on your WiFi router and do it.

Strong password – reliable network

A password is essential protection. You will have to choose a combination of 8 characters (minimum), which may include numbers and letters of the Latin layout. In this case, special characters cannot be used, and it is better to take care of the uniqueness of the keygen. Here, as on the Internet, the same rules of security and selection of a reliable key apply. There are many tips and programs on the Internet that generate hack-proof passwords. But when using services of this kind, don’t be too lazy to change 1-2 characters in the result. For reliability. How to remember to write it down. Believe me, a notepad for logins and passwords often helps out. If you save the data for the device for yourself, then the procedure you just looked at will no longer have to be performed.

On most routers, the word admin is selected as the default preset for the login and password. But, nevertheless, it will not be possible to use the same password for a new login; the system will request a length of at least eight characters.

Changing the password: basic rules

Let's start with, perhaps, the most difficult option: the router was given to someone, without a box or password. This is really the question of how to change the Wi-Fi password. First, turn the router upside down and carefully copy the data from the factory sticker. Usually it says 192 168 1 1 wi fi; people most often request to change the password at this address.

The “Reset” button on the router case resets all device settings to factory settings, which is often why access to it is structurally limited, it is covered with a panel that cannot be removed, or it is recessed into the device case so that it can only be pressed using a thin and long object. This is another security measure against inexperienced users.

You have done everything, the lights slowly went out and everything else came on, after which only the network, wi-fi signal and connected devices indicators remained on and flickering. Now all that remains is to go to the browser and enter 192 168 1 1 or 192.168.0.1 in the address bar, then the router will require the factory data - those that you prudently copied from the case. Remember to pay attention to your keyboard layout and case, this will allow you to enter data accurately on the first try.

Afterwards you will automatically go to the settings menu. Most manufacturers try to make it intuitive for users so that they do not get confused about where to enter what and what.

Among the large number of tabs and subpages, you are interested in what will be called “wireless network” or, alternatively, “wireless connection”. In the subsection entitled “basic” or “general” settings, you can change the name of the router, which is important if one of your neighbors has the same model. The name can be anything; there are no restrictions on what you can choose.

If you personally still have a standard login and password on your router, or you know the ones that are used, then you can change them by going into the settings.

You do everything the same as when you roll back to factory settings, skipping the “reset” button on the router. Log in to your browser using links 192 168 1 1 or 192.168.0.1, open the settings window, select the tab responsible for managing the security of the router.

Enter the old access keys in the required fields, and the new ones below.

Specific models and examples

Let's look at basic and common router models and program interfaces that will help you change your Wi-Fi password.

Routers produced under the Tp-Link brand are distinguished by ease of management and a clear interface, not to mention the fact that the popularity of this brand has made it recognizable, and also influenced the Russification of the brand. So, by switching tabs, you can easily find what you need and figure out how to change the password on your Tp-Link router.

After entering the router management, open the section in the list of tabs on the left “System Tools” (usually the penultimate field), select the tab from the drop-down submenu "Password" . Enter your previous personal login and password in the specified fields (red rectangle in the photo). In the area highlighted in blue, enter new access codes. The password will have to be entered in two fields to confirm. Then click the button "Save".

Since each router has a unique interface, the names of some sections may differ. However, they all work on the same principle and have almost the same functions. Let's look at how to change the password for a Wi-Fi network using the D-LinkDir-615 router as an example.

D-Link routers are not so common, so there is a high probability that if you buy an older model, the interface will be in English. But the manufacturer took care of the clarity of access control, so there shouldn’t be any problems.

After entering the router management interface, select the tab in the left list "Control" , then go to the password change window. You will have to confirm your Wi-Fi password and then click the save settings button. The changes made will either be activated immediately or will take effect after restarting the PC, depending on the computer OS.

Now you know how to change the Wi-Fi security password through the router settings menu.

How to change the password for a virtual network

We figured out the router, and as you can see, everything is extremely simple. But sometimes it happens that a router is not used to implement a home network. The role of an access point is played by a laptop that is connected to the Internet and distributes it via WiFi. Such groups are called virtual. Is it possible to change the Wi-Fi password in this case? Yes it is possible. Only depending on how the group was created, the procedure for changing the key differs.

If you created a connection using the management console (computer-to-computer connection), then everything is very simple. You need to open the Network Control Center. To do this, right-click on the connection icon in the tray. In the window that appears, select “Wireless Network Management” . Now you need to find the required connection, right-click on it and select "Properties" .

The window that appears is divided into two tabs. We are interested in the second one – security. Here we put a tick opposite “Display entered characters” and we see the current key. To change the password on your WiFi router, simply enter different values ​​and click "OK" .

If you created a group using the command line, then there is a special command to change the code. Run the command line (as administrator) and write the following: netsh wlan set hostednetwork mode=allow ssid=My_virtual_WiFi key=12345678 keyUsage=persistent. Instead of the numbers 12345678, enter the new password that you want to set. Then you start the network again and connect to it, but enter a new identifier.

Now you know how you can change the password on a WiFi router. Moreover, regardless of how it was organized.

Pay attention to details that are important for connection

Changing the wi-fi password requires you to reconnect to the network from all devices used without exception. If you want to check who is connected to the network, this information is present in the computer settings. Open "My computer" and in the rubricator on the left find the subsection “Networks” . It displays users and devices connected to the personal network during a defined period of time

You will have to look for the list of available networks and their settings in the tab "Control Panel" . Therefore, it was said above about the need for an original name for the router - it is difficult to choose a personal one from five identical ones.

At the stages of working to change the Wi-Fi password, difficulties arise, but they are not difficult to solve. Let's move on to the main problems:

1. The router does not have a factory sticker with installation data. By searching the photo on the Internet, determine the device model, and on the manufacturer’s website or specialized forums you will find the necessary, accurate and detailed information.
2. It is impossible to log into the specified address 192 168 1 1 or 192.168.0.1 to change the settings. Open menu "Start" , find the line “Find programs and files” and enter cmd. Press Enter and the Command Prompt or Registry prompt will open. Enter the ipconfig code in the line, confirm the command again with the Enter key. In the window that appears, find the line that will be signed as "Main gate" . The combination of characters after it is the address for going to the router settings.

The illustration highlights the points necessary for configuration: codes for accessing the registry and the address line of the basic gateway. Remember that periods and spaces are considered characters and enter the address without errors, or use the “copy/paste” commands.

The article discusses the basic options for changing the password of a Wi-Fi router, and what is connected with it. Good luck, and don't forget to keep your network secure.

Good day!

- Why does my Internet slow down every evening, I can’t download anything, and pages take a long time to open? - an acquaintance once asked me.

The next day, after looking at his Internet settings, programs, router, etc., I was surprised by only one thing: his home Wi-Fi network was not protected with a password (there simply wasn’t one). Oddly enough, after setting a password, the slowdowns and lags of the Internet stopped, and in the evening the Internet began to work as expected. Apparently, there were some neighbors who successfully used his Internet channel, just in the evenings everyone comes from work/school, etc.

In general, I will give one piece of advice: in any case, if you have any suspicions, change the password for the Wi-Fi network. If you don’t have it at all, be sure to install it (even if you have very fast unlimited Internet).

In this article we will look at how this is done.

Important! You also need to change your Wi-Fi password because those who connect to your network will use the Internet under your IP address. In principle, if they only occupy your Internet channel, it’s not so scary.

But just imagine, what if they commit illegal actions - the first person they come to will be you (most likely)! I think there’s no need to explain that it’s better to avoid such visits? Therefore, PASSWORD is required!

To change the password for accessing a Wi-Fi network, you need to do approximately the following:

• go to the Wi-Fi router settings;
• then open the tab/section for setting up a wireless network (also called Wireless or Wi-Fi);
• select in this tab certificate of safety, encryption type, And password to access the network.

In general, everything is quite simple. Before moving on to specific router models and their configuration, I will focus on several important parameters (mentioned above).

Certificate of safety

The most popular security certificates, which are found in almost every router, are WEP, WPA-PSK and WPA2-PSK. Today, the best security is provided by the WPA2-PSK certificate, which is what I recommend choosing.

If devices that do not support WPA2-PSK will connect to the Wi-Fi network, then choose the WPA-PSK option (some routers have a mixed WPA/WPA2-mixed mode).

By the way, some inexpensive router models may not work stably and break the connection when WPA2-PSK is selected. In this case, try limiting the speed of the router and changing the security certificate.

Encryption type

Closely related to the security certificate. If you select WPA, the temporary key integrity protocol TKIP is used; when using WPA2, the secure AES standard is used. This is exactly what I recommend starting from. If you select settings other than this, you may experience problems connecting devices to your network.

Selecting a password

Here, perhaps, I will say only the most basic things that I think about his choice. I noticed that many users set very simple passwords, like: 11111111, 2222222, 11111122222, etc. Such passwords are quickly selected and cracked.

It is unlikely, of course, that someone will purposefully and for a long time select the password for your home Wi-Fi network (especially since the vast majority of them do not contain any valuable data), and nevertheless I will give a couple of tips on what it should be password:

At least 8 characters;

It is advisable to use both letters (Latin) and numbers (of course, some will also say special characters - but in my opinion it’s not worth it, it’s too tedious to type them later on a phone or tablet when connected to the network);

Do not use your names, standard words (password, admin, computer, etc.), the most famous dates, etc.

Now let's move on to specific router models. So...

You might find this article useful on how to enter your router settings. In some cases this cannot be done (link is given below)...

How to log in via 192.168.1.1: entering the router settings -

D-Link

One of the most popular brands of routers in our country. There are quite a large number of models, but there are not so many firmwares that differ from each other (fundamentally), 3-4 pieces. In this article I will give several of their variations, and first a few important parameters.

IP address (default) to enter settings: http://192.168.0.1

(it is advisable to use Internet Explorer browser)

Login(default): admin

Password(default): either an empty string or the same admin.

In older router models (such as DIR-300, DIR-320, DIR-615, DIR-651), as a rule, the firmware is not translated into Russian and is presented in this orange-gray design. To change the password, you need to go to the router settings (if you can’t log in, then just above in the article there is a link to instructions for solving the problem) , and open the section "Setup/Wireless setup".

At the bottom of the window in the column Network Key enter your password (see screenshot below), by the way, you can also set it there security certificate and encryption type(what this is - see above in the article). After entering the settings, save them - button Save Settings.

DIR-300 - setting a password // Setup/Wireless setup

By the way, there is similar firmware in Russian translation, it is configured in the same way.

For router models DIR-300 NRU and DIR-320 NRU(firmware version 1.2) the settings page looks a little different: a nice white background, all the main settings sections are presented on the left side. Opening "Wi-Fi/Security Settings" , and install:

1. network authentication: WPA-PSK (for example);
2. PSK encryption key: this is your password;
3. WPA encryption: TKIP+AES.

For D-Link DIR-620/DIR-320 NRU routers In firmware versions 1.3 and 1.4, the interface is slightly different: when you go to the main screen, you see a gray background and tiles (like in Windows 8) on which the main settings sections are displayed.

To change the password, you need to open the “Wi-Fi/Security Settings” section (number 1 on the screen below), and then enter:

1. network authentication: WPA2-PSK (for example);
2. Encryption key - enter the password;
3. WPA encryption - AES (see screenshot below).

Router from Rostelecom (Sagemcom)

In general, as a rule, no big problems arise with routers from Rostelecom - everything works as expected. And when you connect to the Internet, they will give you a password and set everything up. The firmware in routers is completely in Russian, so questions about its configuration usually do not arise.

Address to enter settings: http://192.168.1.1/

Default password and login: admin

Browser: almost any: Opera, Firefox, IE, Chrome, etc.

To set a password, open the section "WLAN Setup/Security" . Further in the subsection "Manually setting up an access point" select:

1. Authentication - WPA2-PSK;
2. WPA/WAPI password - enter your password;
3. Encryption WPA/WAPI - AES;
4. then click the button "Apply/Save" (screenshot below).

Actually, that's the whole setup...

Tp-Link

One of the largest manufacturers of routers, tens of millions of people around the world use their products. In our country, their routers are also very popular, and cope quite well with Russian networks (they work with almost all Internet providers).

IP address to enter settings: 192.168.1.1 (in rare cases 192.168.0.1 , depending on the firmware version);

Username: admin;

Password: admin (type without periods, commas, etc.).

Most often you have to deal with the so-called “green” firmware. Found in routers: TP-LINK TL-WR740xx, TL-WR741xx, TL-WR841xx, TL-WR1043ND(45ND), etc. About 50/50 firmware is in English/Russian.

The screenshot below shows the English version: to change the password, you need to open the section "Wireless/Wireless Security" , then select WPA/WPA2 -Personal and put:

• Version - Automatic (Recommended);
• Encryption - Automatic (Recommended);
• enter the password in the line PSK Password .

TP-Link (green firmware)

Almost identical actions will need to be done in the Russian version of the “green” firmware: open the section "Wireless Security" , then set PSK password(see number 3 on the screen below).

TP-Link "green" firmware (Russian version)

You can also quite often find a “blue” version of the firmware in TP-Link routers (for example, TP-LINK WR340G, TP-LINK WR340GB and other similar models).

Their setup is almost identical:

1. first open the section "Wireless Settings" ;
2. in the column Security Type install WPA-PSk/WPA2-PSK;
3. Security Option- set Automatic;
4. Encryption- install Automatic;
5. PSK Passphrase- this is the password (slightly different spelling than in other firmware versions). You must then specify it when connecting wirelessly to the router.

TP-Link "blue" firmware

After making the settings, save them (button Save on the screen above, see number 3).

TRENDnet

The access parameters are relevant provided that the router has factory settings and its IP has not changed.

IP address to enter settings: http://192.168.10.1

User Name (login): admin

Password (password for access): admin

In general, TRENDnet routers most often have 2 firmware versions: blue and gray (in both Russian and English).

To configure security and set a password in the blue firmware, for example, of the TRENDnet TEW-432BRP router, you must do the following:

1. open section Wireless/Security ;
2. in field Authentication Type select WPA;
3. in field PSK/EAP select PSK;
4. in field Cipher Type select Auto;
5. in field Passphrase and Confirmed Passphrase enter your password and press Apply(screen below).

In the “gray” version of the firmware (for example, as in the TRENDnet TEW-651BR router), actions are performed in the same way, even menu items are located in the same places.

Asus

IP address (web interface): 192.168.1.1

In the authorization lines, type login: "admin", password: "admin" (enter without quotes!). Browser preferably IE (although modern versions of the web interface work well with all popular browser versions Firefox, Chrome, Opera, etc.).

Most often, ASUS routers have two firmwares: “blue” and “black” (usually localized in Russian).

To change the password in routers ASUS RT-N10E, RT-N10LX, RT-N12E, RT-N12LX, etc. (this is with blue firmware), you need to open the section "Advanced settings/Wireless network/General tab" .

In the column "WPA pre-shared key" enter your password and save the settings.

ASUS // "blue" firmware

In ASUS RT-N10P, RT-N11P, RT-N12, RT-N15U, RT-N18U routers, the firmware (in terms of password settings) differs only in color. In it you also need to open the section "Wireless network" , tab "Are common". Then change the column "WPA Preshared Key" and save the settings.

ASUS // "black" firmware version

Zyxel

• IP address of the router on the network (web interface): 192.168.1.1
• Login: admin
• Password(default): admin

To change the password on ZyXEL Keenetic of the first series, you need to go to the web interface, open the section "Wi-Fi network", tab "Safety" . Next set the following parameters:

• Authentication- WPA-PSK/WPA2-PSK;
• Type of protection- TKIP/AES;
• Network key format- ASCII;
• Network key (ASCII)- set your password, which you will then need to specify when connecting wirelessly to the router.

Newer routers (for example, Zyxel Keenetic II: Start, Giga, Omni, Viva, Extra) have slightly different firmware installed. To change the password in them, you need to select the section in the menu "Wi-Fi" and then select the tab (top) - "Access point" .

NetGear

• IP address to enter the router settings: 192.168.1.1
• Login: admin
• Password(default): password
• You can use almost any browser: for example, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.

To change the password in NETGEAR routers (using the model WNR2200 as an example): open the "Wi-Fi Settings" section, then set:

• Security options: select item WPA-PSK (TKIP) + WPA2-PSK (AES) ;
• Passphrase: enter your password (you will need to enter it later when connecting wirelessly to the router).

Basically, in this short article I tried to look at all the most popular router models. If you have a different model from those given, the operating technique will not change: first you need to find the IP address to enter the router settings (can be found in the documents for the device, or on the manufacturer’s website to determine the characteristics of the PC).

Then, having entered the router settings, open the Wi-Fi security section (or Wi-Fi settings) - then set the desired password and save the settings. Difficulties most often occur when entering the router settings: either the password does not match, or the IP address is incorrect, or something else...

This is where I end this article, hello amigo!