Many operations require preliminary selection of one or more files (for example, when copying or to determine the size) and this has to be done quite often, so it is important not to waste precious time on such trifles. We will look at the most effective and fastest ways to select files in various situations, starting with the simplest

Mouse selection

Single file selection

It’s simple, move the cursor over the folder or file and click once with the left mouse button.

What should I do if, when clicked, the folder is not selected but opens, how can I change this?

On some computers, the default setting is to open all elements not by double-clicking, but by single-clicking. If this does not suit you, then the settings should be changed: go to the “Start” menu, open the control panel

In it, select the item “Design and personalization”

Then open “Folder Options”

In the window that appears, in the “General” tab, change the “Mouse clicks” item

Selecting consecutive files with the mouse

Clamping left button mouse in any free space and dragging it in some direction, we will see a blue rectangle that shows which files will be selected after we release the left mouse button:

This method is convenient if you need to select several files located nearby or all files when there are not many of them. But what if we need to designate a large number of files, for example, highlight all the vacation photos, of which there are 500 in a folder? You can, of course, use the method described above: pull the rectangle all the way, but this is so inconvenient!

Selecting all files in a folder using hotkeys

Instant selection of absolutely all elements in the folder comes to our aid - hot keys on the keyboard CTRL+A(English)

After clicking them, everything in the open folder becomes active.

Selective file selection

Team Ctrl+A really convenient if you need to select a large number of elements. but what if we have 500 files, but only need to allocate 498? Or, out of 10 files, you need to select those numbered 2,6,7 and 9; a regular rectangle won’t do the job here, but you need to perform operations (for example, copying) on separate files too long.

Selecting individual files with Ctrl

Clicking on a file will make only this file active; if we click on another, the computer will immediately “forget” the old selection and only last file. Holding Ctrl allows you to select as many files as you like with a mouse click.

Holding CTRL and clicking the mouse not only selects the file, but can also deselect it if you click on it again.

Ctrl cannot be held down all the time, but only during the click itself.

Selecting consecutive files with Shift

Let's consider another option, when you need to select out of 500 files only those numbered 5,6,7,8,9,10. Can be used standard way select a rectangle while holding the left mouse button. Or you can go the other way, which is great for selecting files in a row: select the first file, in our example it is number 5, and then, holding SHIFT, click on the last file, that is, number 10. As a result, all files, those between these two will be highlighted

Selecting multiple groups of files using CTRL and SHIFT

Let's consider last option: what to do if you need to select from our mountain of files not just from the fifth to the tenth, but also from the thirtieth to the fortieth. We already know that Ctrl allows you to select files at once that are not consecutive, and Shift, on the contrary, selects groups of files that are nearby. Using two keys will allow us to select multiple groups, as shown below:

1. Select the first group, repeating the procedure described above with Shift held down: left-click the first file of the group (numbered 5), with squeezed key SHIFT select the last one (number 10)
2. Now let's move on to identifying the second group: release Shift, clamp Now CTRL and click on the first file of the second group (number 30, for example)
3. Important: Without releasing CTRL, hold down and SHIFT and left-click on the last file of the second selected group (number 40)

In this way, you can select as many groups as you like, and using CTRL and clicking on single files, you can exclude or additionally include individual documents in the list.

We hope that you will begin to actively use these methods.

For self-test:

1. Let's remember the problem given above: out of 500 files, you need to select 498. What is the easiest way to do this?
2. I need to select files 1, 2-5 and 7, how can I do this faster?
3. Is it possible, without selecting each one and selecting three separate groups, to select files 1-10, 20-28, 30-35?

Answers:

1. Select all the files in the folder using Ctrl+A, and then, holding CTRL, click on the two files from which you want to deselect
2. Using a rectangle or using SHIFT, select files 2-5, and then, holding CTRL, select 1 and 7
3. Possible: use SHIFT to select files from 1 to 35, then, remembering that CTRL also deselects, hold it down on number 11, the selection from which you want to deselect, then, holding both CTRL and SHIFT, click on number 19. All that remains is to remove active file number 29 by clicking the left button and mouse and holding CTRL

Share your knowledge with your friends!

You can copy and move files from one location on your hard drive to another different ways, including with the help special programs- . But in this lesson I will talk about the simplest and most fast way manipulation of files (although this is a matter of habit) without the use of third-party programs.

So, if you need to copy (duplicate) or move a file (or folder), then you just need to do a few simple steps.

First, we find the files that need to be copied (or moved) and select them.

You can select multiple files in different ways. The easiest way is to press the left mouse button and, without releasing it, circle necessary files, which are marked in a darker color:

If you need to select all files at once, then in order not to circle all the files, you can press the key combination Ctrl+A.

If you need to select several files selectively, then press the Ctrl key, hold it and point the mouse at the desired file.

arrow-shaped, then click on the desired file (thus selecting it) and move on to the next one.

If you see a mouse pointer when you hover over a file shaped like a hand, then you don’t need to click on it to select a file, because it stands out on hover. Continuing to hold the Ctrl key, we select all the necessary files (or folders) in this way.

If you need to select a group of files in a row, then the easiest way is as follows. Move the pointer to the first file in this group and select it, then press the Shift key and select the last file in the group. This way you will select the entire group of files.

If you need to copy or move one file, then you do not need to select it.

After all the necessary files are selected, right-click on them. In the context menu that pops up, we are interested in two items: Cut And Copy:

Select an item Cut in order to move files to another location, and the item Copy in order to create copies of files in another location while keeping the originals in their place.

After clicking (left mouse button) the item Copy the selected files are placed on the so-called clipboard, and you do not notice anything.

After clicking the item Cut the files are also placed on the clipboard, but at the same time they become darker, showing us that after transfer they will be deleted from this folder.

Now we need to open the folder into which the selected files will be copied (or transferred). Opening the desired folder, click on the empty space inside it with the right mouse button and select Insert (with the left mouse button).

Absolutely any information that is present and added to the computer is contained in files and has its own sizes and formats. To ensure that these files are not scattered all over the computer, and that they do not have to be searched for a long time, users create folders and call them with appropriate names. Folders can be used for different needs, and this way you can separate some files from others. For example, you can cite the most popular folders that you probably had to create at least once, or rather, these folders have names (music, photos, documents, games, and so on). Today we decided to tell you about several ways to select all the files in a folder.

We designate

Before performing any operation on files, you will need to select them. You can select files in different ways, it all depends on how many files you need to select, or rather, you can select one file, a certain number of files, or all the files contained in a certain folder. If you need to know how to quickly select all files, then you can use the mouse or keyboard for this task. It's simple.

Traditional manipulator

Let's first look at the option of how to select all files in a folder using the mouse. To do this, you will first need to use the left mouse button, it will be the one that will make the selection, and using the right mouse button you can already perform specific task. For example, you can copy files, delete them, or move them to the desired location. Let's now move on to the step-by-step instructions.

First you need to open the folder that contains the necessary files. Hover over free place, for example, at the very top of the folder, then press the left mouse button and start dragging the cursor from the first file to the very last. In this case, you select all the files at once. When the necessary files have been selected, you need to click the right mouse button, and you will see where you can select a specific operation. Now you know how to immediately select all files using the mouse, and if you carefully read the instructions, then you can immediately understand that there is nothing complicated about this.

Using the keys

Now let's look at how you can copy files from a folder using the mouse and keyboard at the same time. In order to select the necessary files, you will need to use special combinations on the keyboard, as well as the left mouse button. In this version, we decided to present several methods at once, so please read it carefully.

First way. Open the required folder with files, and then press the combination “Ctrl + A” on the keyboard. If for some reason the files were not copied, then you should pay attention to the keyboard layout; it must be switched to English language. This method is only suitable for selecting all the files contained in a folder at once.

Second way. Select the first file that is in the folder, then press and hold the “Shift” button on the keyboard and use the wheel to go to the very bottom of the folder. Next, click on the last file using the left mouse button. All files in the folder will be selected, but with this method you can also select a certain number of files by simply clicking on them with the left mouse button.

Third way. First, you need to left-click on the required file, then press and hold the “Ctrl” button on the keyboard, and then simply select the necessary files for selection. You can select all the necessary files, and then give them the necessary command.

Conductor

Now let's look at how to select all files in a folder using the command capabilities of the folder menu. In any Windows operating system, folders open in new windows, they have a special line in which various menu commands are located, among all the possibilities there are also actions for selecting all or specific files. Let's now look at how this is done.

First, you should open the desired folder. If you have the Windows 7 operating system installed, then you need to immediately execute the “Arrange” command, and then simply click on the “Select All” function.

If you are working with operating system"Windows XP", then you need to act a little differently. Click “Edit”, and then click “Select all files”. As you can see, the question of how to select all files in a folder is not that difficult. Moreover, there are many options for solving it.

Total Commander

Now let’s briefly look at how to select files in the “total”. First of all, open the program Total Commander, further in special menu select the selection function, then click select all. In principle, in the program you can use all the methods that we wrote above.

Hello, dear Soft & Apps readers!

In today's short lesson, I will introduce you to several ways of highlighting.

Quite often people (especially beginners) know only one way to select files(using the mouse).

But it is not very universal, there are times when such selection is inconvenient, and therefore I want to show you a few more ways.

In general, you should not underestimate this element; if you know how to select files correctly, you can sometimes save a lot of time! And time, as they say, is money.

Ways to select files and folders

First, let's figure out why we need to select files at all?

Only three main reasons come to mind: and information!

Naturally, when you need to copy/move more than one file, then selection is simply necessary. After all, it’s easier to copy everything at once than separately.

Well, selection is also useful for obtaining information, for example, you can find out how much space a certain group of files takes up.

Now let's get down to business!

I will demonstrate all the methods using these folders as an example:

Method number 1. Rectangular mouse selection

This is the same method that is probably familiar to everyone. Press the left mouse button in the free zone and, without releasing it, stretch the rectangular area.

All files that fall into this area are selected.

Method number 2. Selective selection

I think this method is the most universal! You can select anything and in any order. For example like this :)

To do this you need to hold down the key "Ctrl"(it is located in the lower left corner of the keyboard) and click on the required files.

If you accidentally selected the wrong file, just click on it again and the selection will be removed, naturally the key "Ctrl" must be pressed (otherwise the selection will disappear from all files).

Between presses, "Ctrl" you can let go, i.e. Having selected several files, you can release "Ctrl" and scroll through the window (see what other files are in it), then press again "Ctrl" and continue selection.

Method No. 3. Sequential selection

Selection occurs between folders/files.

First, left-click the mouse to select the initial folder, hold down the key "Shift", left-click on the destination folder.

This selects the specified folders and everything in between.

Like these ones simple ways, can make your life easier more than once :)

They can also be combined, depending on the situation.

For example, here is a selection:

I selected the first three lines using a rectangular selection, then held down the key "Ctrl" and selected several more folders randomly.

You can do it another way: select everything with a rectangle, hold down the key "Ctrl" and remove unnecessary files.

Full selection

Sometimes we have to select everything that is in the window. Again, this can be done in different ways.

1. Using any of the above methods.

2. In the window, on the toolbar, click the button “Arrange”, then select "Select all".

3. Select the first file in the window and press the key combination "Shift" + "End"(press and hold the button "Shift" and without releasing it, press "End").

4. Select the last file in the window and press the key combination "Shift" + "Home".

Key layout (click on image to enlarge)

Well, that seems to be all I wanted to say. See you in the next lessons!

If you find this information useful, please share it with your friends on in social networks! If you have any questions, be sure to ask them in the comments!

This article will tell you how to select multiple photos using the keyboard.

Have you been on an unforgettable holiday abroad, either at a resort, or just relaxing with friends in nature? Of course, you want to capture such moments in life.

In order not to miss a single possible good shot, you click on your phone, filling its memory to capacity. So you came back from vacation and on a digital camera or on your mobile phone There are a huge number of photo cards that you are looking forward to seeing on your computer.

Now you have successfully transferred all the files to your computer and, of course, now the fun begins - selecting high-quality photos. Of course, such selection is not the fastest thing, but it is worth it. But the problem is, you discovered that your mouse doesn’t work, but you still want to sort through the photos urgently.

Method 1. Ctrl and arrows

When there are many photos in a folder and you need to select them, then of course it will be convenient to use the Ctrl+A combination. But what if you don’t need all the files and, moreover, you only need some photos that are scattered? For this purpose there is a selection using the Ctrl key.

By holding down the Ctrl key and moving left, right, up, down using the arrow buttons, you can select multiple .

1. Press and hold the Ctrl key.
2. Use the arrows to move the colored rectangle across your photos.
3. When the rectangle surrounds the photo you want, press Spacebar.
4. Continue moving with the arrow keys and repeat step 2.
5. When you're done selecting, release the Ctrl key.

Thus, you can highlight specific photos, scattered photos, one photo at a time, etc.

Method 2. Shift and arrows

Of course, it’s convenient when you can select all photos at once or in separate pieces. But what if the question is how to highlight a large number of photos that are in a row? In this case the best solution will use the Shift key.

By holding down the Shift key and moving left, right, up, down using the arrow buttons, you can select multiple photos.

• Select the photo from which you will start the selection.
• Press and hold the Shift key.
• Use the arrows to expand the color selection in your photos.
• When you're done selecting, release the Shift key.

This way you can select several photos that are located one after another.

You can also combine methods 1 and 2 to speed up the selection process and add individual photos to the selected areas.

To select all photos, use the keyboard shortcut Ctrl+A.

1. If you want to select almost all the photos, with the exception of a few, then it is better to select all the photos using the Ctrl + A key combination, hold down the Ctrl key, use the arrows to move the colored rectangle to unnecessary files, press the spacebar, and deselect the photo.
2. If you need several left or right columns of photos and several photos from another row, then it is better to select the desired column using Shift and the arrows, hold down the Ctrl key, use the arrows to move the colored rectangle to the desired files, press the spacebar to select the remaining required photos .

Now you know how to select multiple photos using the keyboard. The main convenience in such cases is that it is possible to select photos even without using the mouse. Situations often occur when the mouse is temporarily missing, or it is not there at all, or it suddenly breaks.

In such cases, only the keyboard remains and knowledge of its capabilities can make operating your computer much easier. Now you can select multiple photos without any problems.