Using a laptop in everyday life, users sometimes encounter a problem: a key on the keyboard has broken off. The reason could be any factor: cleaning the keyboard, using a vacuum cleaner for cleaning, a stray cat (yes, even this happens), a small child who is interested in everything around him and accidentally breaks a key, and much more. But not everyone knows that this small problem is quite easy to fix.
I'll tell you how to put the button back without loss.

(caution! a lot of photos)

Something has happened and your laptop's keyboard looks like this:

Laptops are all different, but most often their fastening is similar (fastening principle).
The key on the back side looks like this:

We see two pairs of fasteners:
- two latches;
- two grooves for the rocker ears.
The key cover is attached to the keyboard using a special rocker, which consists of 2 parts connected by a hinge in the middle and forming the letter X (ha).

It often happens that the key “breaks out” along with the rocker. In this case, you must first disconnect the rocker from the key cap, install the rocker on the keyboard, and only then return the key to its rightful place.
To do this, take the key, unsnap the latch on one side of the key, and remove the antennae of the rocker and grooves on the other side:

We get 2 parts: a key cover and a rocker.
The keyboard has 3 lugs for fastening: one larger and two smaller.

If for some reason these fasteners are bent (for example, a heavy object fell on the keyboard, as a result of which a key jumped out), they need to be bent into the correct position. Be careful, you cannot bend these fasteners too much, because... They are made of aluminum and break off easily, after which repairs will become much more difficult.

Install the rocker on the keyboard:
- place it under the large mounting eye

Lightly press the rocker onto the 2 small mounts.

After installing the rocker, you can put the key cover back.
- insert the protrusions on the rocker into the grooves of the lid

Here you need to act carefully and not miss :).
Next, making sure that the ears fit into the grooves, lightly press the top of the key to secure the key cover,
a slight click will be heard.

Ready! the key is in place.

Large keys (Tab, Shift, space, enter), in addition to a plastic rocker, can have a metal stabilizer for uniform pressing.

There are two additional tabs on the keyboard base to secure this stabilizer. Otherwise the design is the same as described above.

First we wind the ends of the stabilizer.

Then we insert the lower “antennae” of the rocker into the grooves and, with a light press, put the button in place.

The spacebar (and sometimes other long keys) is supported by two rockers and a stabilizer.

In principle, the installation is no different from the above-described installation of the Shift key.

Above we examined the internal structure of the keys of a Hewlett-Packard laptop.

I almost forgot. If a swing, consisting of two parts, was disassembled during an emergency, do not despair. Using a needle, toothpick or other suitable object, it is easy to assemble. We put one side into the groove, and to install the second side we use our auxiliary object.

Now, dear users, you will have no questions:
- How does a laptop keyboard work?

How to replace the keycap?
- what to do if a cat tore out a key on a laptop?
and so on.

P.s. Because there were too many photos, an additional part of the article can be viewed on my blog (if anyone is interested in this topic), where, for example, you can see the devices of the keys of Asus and Apple laptops, some differences and similarities are described.

Sometimes, as a result of improper handling of the laptop or due to a strong impact, the keys fall out. While inserting it into place on a desktop keyboard is easy, it requires some skill. If you are not ready to put the key back in place yourself, then you should contact a service center. Specialists will be able to perform all the necessary actions within five minutes. And the cost of this service does not exceed 100 rubles.

They can fall out for several reasons. Here are the main ones:

• a strong blow to the laptop or keyboard;
• independent attempt to remove debris from under the buttons. As a result, some of them may fall out;
• excessive pressure on the keys while working with a laptop;
• liquid getting inside.

There are several options for keys not working. Depending on this, you should carry out repairs yourself or contact specialists. If the reason is a short circuit or damage to the cable, then you should definitely contact a specialist.

Important! The button has so-called antennae. If one of them breaks as a result of external influence on the keyboard, then it is necessary to completely replace the button. Otherwise, it will constantly crash. Replacement of the keyboard is required when the matrix is ​​broken, as a result of which it is impossible to restore full functionality of one or more keys.

What is required for self-repair

If you decide to insert the key yourself, then you will definitely need a needle and a paper clip or items that can replace them. If you need to make minor repairs, additionally take a soldering iron, knife, screwdriver, glue and small tweezers.

Important! Incorrect actions may result in the need to completely replace the keyboard on your laptop. Therefore, if you do not have the skills to repair computer equipment, it is better to turn to specialists.

What is a keyboard button on a laptop?

Here are the elements that make up a button on a laptop:

Important! Make sure the swing is attached to the plastic part completely, otherwise it will fall out.

The process of installing a button on a laptop

Before installing the key, you must carefully examine the swing to ensure its integrity. If any part is damaged, you will need to change the button from specialists or order it yourself from specialized stores.

The installation process is as follows:

Important! If the cover falls out along with the swing, then it is necessary to install these parts separately from each other, as indicated above. If you do not disassemble these two parts, then there is a high risk of damage to the antennae by which the button clings to the keyboard.

Installation of large buttons occurs as on a regular keyboard. There is a small metal stabilizer that needs to be inserted into the grooves on the keyboard. And then you will need to lift it in order to install the lid strictly on it. If the installation is performed incorrectly, there will be no springing effect.

If the key antennae are broken, but you manage to find them, you can use super glue to fix them.

Video - How to insert a button in a laptop

Using a laptop in everyday life, users sometimes encounter a problem: a key on the keyboard has broken off. The reason could be any factor: cleaning the keyboard, using a vacuum cleaner for cleaning, a stray cat (yes, even this happens), a small child who is interested in everything around him and accidentally breaks a key, and much more. But not everyone knows that this small problem is quite easy to fix.
I'll tell you how to put the button back without loss.

(caution! a lot of photos)

Something has happened and your laptop's keyboard looks like this:

Laptops are all different, but most often their fastening is similar (fastening principle).
The key on the back side looks like this:

We see two pairs of fasteners:
- two latches;
- two grooves for the rocker ears.
The key cover is attached to the keyboard using a special rocker, which consists of 2 parts connected by a hinge in the middle and forming the letter X (ha).

It often happens that the key “breaks out” along with the rocker. In this case, you must first disconnect the rocker from the key cap, install the rocker on the keyboard, and only then return the key to its rightful place.
To do this, take the key, unsnap the latch on one side of the key, and remove the antennae of the rocker and grooves on the other side:

We get 2 parts: a key cover and a rocker.
The keyboard has 3 lugs for fastening: one larger and two smaller.

If for some reason these fasteners are bent (for example, a heavy object fell on the keyboard, as a result of which a key jumped out), they need to be bent into the correct position. Be careful, you cannot bend these fasteners too much, because... They are made of aluminum and break off easily, after which repairs will become much more difficult.

Install the rocker on the keyboard:
- place it under the large mounting eye

Lightly press the rocker onto the 2 small mounts.

After installing the rocker, you can put the key cover back.
- insert the protrusions on the rocker into the grooves of the lid

Here you need to act carefully and not miss :).
Next, making sure that the ears fit into the grooves, lightly press the top of the key to secure the key cover,
a slight click will be heard.

Ready! the key is in place.

Large keys (Tab, Shift, space, enter), in addition to a plastic rocker, can have a metal stabilizer for uniform pressing.

There are two additional tabs on the keyboard base to secure this stabilizer. Otherwise the design is the same as described above.

First we wind the ends of the stabilizer.

Then we insert the lower “antennae” of the rocker into the grooves and, with a light press, put the button in place.

The spacebar (and sometimes other long keys) is supported by two rockers and a stabilizer.

In principle, the installation is no different from the above-described installation of the Shift key.

Above we examined the internal structure of the keys of a Hewlett-Packard laptop.

I almost forgot. If a swing, consisting of two parts, was disassembled during an emergency, do not despair. Using a needle, toothpick or other suitable object, it is easy to assemble. We put one side into the groove, and to install the second side we use our auxiliary object.

Now, dear users, you will have no questions:
- How does a laptop keyboard work?

How to replace the keycap?
- what to do if a cat tore out a key on a laptop?
and so on.

P.s. Because there were too many photos, an additional part of the article can be viewed on my blog (if anyone is interested in this topic), where, for example, you can see the devices of the keys of Asus and Apple laptops, some differences and similarities are described.

Having learned the structure of the button and a number of simple operations for removing and installing it, the user will be able to independently fix a minor breakdown or replace the faulty key with a new one.

How to insert a button into the keyboard on a laptop

A laptop, unlike a personal computer, has a built-in dialing device, the cost of which is significantly higher due to its compact size and integral design. That is why its repair, including independent repairs, is constantly in demand and economically justified.

With prolonged use and active use, parts of the keyboard fall out or break, requiring replacement, quite often.

However, before you run to the service center, let’s try to figure out whether you can insert a button into the laptop keyboard yourself at home and, perhaps, save money and personal time.

Possible reasons

There can be many possible reasons for keys breaking or falling out:

To understand what this leads to and determine the likelihood of self-repair, consider the following cases when one or more keys have fallen out or do not work:

1. the upper part simply jumped out of the mounts, got stuck, the plastic mount broke, or the fixing lugs on the aluminum base of the keyboard were bent. - We install, repair or replace ourselves;
2. there was a short circuit and/or destruction of the conductive paths due to a manufacturing defect, liquid ingress or other outside interference. - It is worth contacting the service if you do not have certain skills;
3. damage to the cable connecting to the motherboard. - Replacement (preferably by a specialist) of the film or the entire device.

Taking into account the fact that the majority of users are amateurs, we will consider only the correction of breakdowns in the first case: mechanical damage.

To do this you may need:

• a regular needle or a syringe;
• paper clip;
• glue;
• knife, small screwdriver;
• wire cutters and pliers;
• thin soldering iron and lighter;
• small vice.

The first two positions of the list are enough to simply insert the dropped item, and the rest may be needed for minor repairs.

Important: Please note right away that all work must be carried out ONLY with the device disconnected from the network and the battery removed.

Photo: Parsing the assembly of keys

Button and its design

Before inserting a button into the laptop keyboard yourself, we recommend that you become familiar with its design. This will help you carry out repairs correctly, as well as make installation easy and simple. It should be remembered and taken into account that, unlike a stationary keyboard, a laptop keyboard has a shorter stroke.

They consist of:

A typical keyboard base in a laptop is an aluminum plate, stamped with ears for good fixation of the clamshell and the contact pad, under which there are three layers of film with conductive graphite tracks.

Reliable fastening of the swing ensures uniform movement and the absence of distortions when pressing the key.

Please note that different manufacturers may have slight design differences in the shape and types of clamps.

Therefore, if you need to disassemble it yourself for the first time, proceed carefully.

Disassembly procedure

There are often situations when it becomes necessary to completely remove and disassemble the button. For example, sinking, lack of response on the screen when it is pressed, or deformation of the folding bed mounting ears. Removing, disassembling and inserting a button into a laptop keyboard is quite easy.

How to remove the GRUB bootloader? More details here.

To do this, you will need a thin, flat instrument, such as a dental hook. As you know from the previous section, the swing is attached to the lid in four places. You can’t just bend it and “rip it off” - this will deform the swing and lead to damage.

Inserting a button on a laptop is very easy

First, we once again carefully inspect all the fasteners, ears, antennae and grooves. If you have carefully studied the device and design, and read the disassembly procedure, then putting the popped element back in place will not be difficult.

This process involves two simple steps:

Please note that sometimes the lid will fall out along with the swing. In such a case, you should disassemble it, carry out an inspection, and only then install it. Moreover, first we insert the folding mechanism, and then the lid itself.

The described process may seem complicated, but you just have to try it once and you will see for yourself that inserting a button into a laptop keyboard is very simple!

Installing large buttons

Function keys (space, register, tab, enter, etc.) are larger than the others. It is this property that requires a slightly different order of installation. The reason for this is the presence of a metal stabilizer, which ensures even pressure.

There are additional lugs on the keyboard backing for reliable fixation of the rigidity amplifier itself.

And although everything else is exactly the same as described above, we install long buttons on the folding bed in three stages:

Please note that some long keys (for example, the spacebar) are fixed by two folding mechanisms and a rigidity amplifier.

We repair keys

As a rule, it is better not to start complex and time-consuming repairs yourself.

Having disassembled a faulty, poorly functioning or torn out key, you will have to, based on its careful examination, make one of three decisions:

• put it back “as is”, without changes;
• purchase and install a new one (used is also possible);
• make minor repairs or replace parts from the “donor” and continue operation.

For the last point, you may find the tools we talked about above useful.

Minor mechanical repairs include:

• assembly and installation of the popped-out parts of the mechanism into the grooves (quite often the clamshell “crumbles”);
• correction of bent lugs in the metal base of the keyboard (for example, when a heavy object falls on the keyboard);
• gluing cracks and broken fasteners.

It is not worth repairing the damage to the latches and hinge joint of the clamshell - it is better, if possible, to find a “donor” or replace the entire key. The smoothness, softness and noiselessness of its operation depends on this.

A rubber spring is usually glued to a film with conductive tracks. Sometimes it happens that it falls out. In this case, before inserting the button into the laptop keyboard, you should carefully install its wide part towards the bottom, strictly in the center. Displacement of the spring during installation is not allowed.

Having a problem with the keys? Try to solve it yourself if possible. It is not difficult! All you need is attentiveness, perseverance, accuracy and a little time.

Want to know how to choose a WIFI adapter for your TV? More details here.

How to install FLASH PLAYER on LG TV? Find out here.

proremontpk.ru

How to insert a button on a laptop? A button fell out of a laptop - what should I do?

We constantly use mobile PCs in our daily lives. In it, the keyboard is the part of the device that takes on the most mechanical stress.

The most common causes of breakdowns

The keyboard on a mobile PC has approximately the same structure as on a personal PC. It, like any device, is very sensitive to all kinds of dirt, animal hair, crumbs, and especially liquid spilled on it. After a certain amount of time using the keyboard, the buttons on the mobile PC fail or simply fall off.

Also, the cause of breakage of buttons on a mobile PC can be a simple banal cleaning of the keyboard using a vacuum cleaner for this purpose. Or a small child may accidentally tear off a key. Also, the cause of such a breakdown can be pets that live with you. This also happens quite often. But you don’t need to immediately take your laptop for repair. Very often you can do everything yourself.

Button structure

Before you consider how to insert a button on a laptop, you need to know its structure and mounting features.

The button consists of the key itself, the mechanism for holding it and a spring element with which it can be raised and lowered. There is also a special film with platforms and tracks.

The mount consists of two parts. These two parts are fastened together in the center by small “antennae”. They come out of the inner part of the mount and are inserted into special grooves in the outer part. Thanks to this design, they can move when you press them. The button itself is attached to opposite sides.

Let's look at how to insert a button on a laptop

If a button falls out on your mobile PC, there is no need to panic right away. In many cases, the problem resolves itself. At home, you can also solve the problem of how to insert a button into a laptop. To do this, it is enough to have a simple paper clip with you. Before inserting the button into the laptop to replace it, the old part must be removed from the keyboard. Working with buttons on a mobile PC requires more care, as they are flatter and can be damaged if pressed hard. Removing an element goes like this. It is necessary to bend the paperclip into a straight line and pass it under the lower platform of the keys. Now you need to pull it towards you, and the key will jump off its base.

Now let’s figure out how to insert a button on a laptop, provided that all the “antennae” located on the “rocker” and the grooves are not damaged. This is the easiest way. To do this, the button must be installed in the upper position on the base under the required mount. After it is in place, the key must be gently pressed down.

It should be noted that you do not need to use force when installing the keys. Any pressing must be done smoothly and easily.

After installation, you need to carefully check the fastening of the replaced key. When purchasing new buttons, you need to check whether they will fit your laptop model. If you need to change several parts, it is better to do it gradually. So as not to confuse the location on the keyboard.

Before inserting a button on a laptop, you need to carefully check that the plastic mount, which is located under the key itself, is in its place. It may immediately seem that it is very difficult to connect everything. But in fact, this is not entirely true, because in reality there can only be one correct option. You can't install anything differently.

How to insert a large button

Let's look at how to insert a button on a large laptop. These are keys such as Space, Tab, Shift, Enter. In addition to the “rocker”, which is made of plastic, they may also have a metal stabilizer. It is necessary to ensure that the key is pressed evenly. On the inside there are two ears necessary for attaching the stabilizer to them. You need to tie up the ends right away. Next, insert the antennae of the “rocker” into the grooves and put the button in its place by lightly pressing it.

The space bar is supported by several “rockers” and a stabilizer. A situation may arise that the “rocker” may be disassembled. It is easy to assemble using a needle or toothpick. One side needs to be inserted into the groove, and the other is installed using a needle.

Let's look at how to insert a button on a laptop in which the mount is made using metal brackets instead of plastic swings. The mounting here is also simple. It should only be noted that such a keyboard will be noisier.

How to fix a button on a laptop

It is necessary to clearly understand that there will most often be only one attempt to repair the button. This must be taken into account before installing a button on a laptop. Before starting the necessary work, you need to have the following tools available:

We place the broken mount on its workplace. Take a needle and a soldering iron. We apply the needle to the place of the broken antennae and make sure that it goes there a few millimeters. We heat it with a soldering iron and fuse it into the mount. We bite off the unnecessary part of the needle. Clean off excess plastic.

Let's consider another option on how to install a button on a laptop. We heat the needle with a lighter and make a groove with it, into which you can place, for example, lint or something like that. Place it in the groove and glue it with superglue

How to make a new button yourself

If the button stops working, there is no need to rush to throw it away immediately. Maybe she's just sunk and can be put in her place. If not, then first you need to carefully examine the button. If it is just a little cracked, then it can be glued together with simple superglue. The only most important thing is that her contact is in the same place.

If the key cannot be glued, you can make it yourself. Let's look at how to make a button on a laptop yourself. To do this, you need to have epoxy resin and plasticine with you. You need to make the necessary shape from plasticine and fill it with resin. You also need to put the contact there. It must be installed correctly. To make it even, it can be trimmed with ordinary sandpaper. So, we figured out how to make a button on a laptop at home. In some cases, this is easier than taking your mobile PC for repair.

If the button just fell out

If a button falls out of a laptop, you need to perform the following steps. On its reverse side there are grooves and latches. They contain “rocker ears”. Their purpose is to connect the button to the keyboard. If the rocker key falls out, they need to be disconnected. Then the “rocker” is installed. There will be a button cover on it. They are connected to each other by the grooves that are located on them.

So, we figured out how to install a button on a laptop. As you can see, this is not very difficult to do, and in many cases you can solve the problem without contacting a service center.

fb.ru

Repairing “torn out” laptop keyboard keys

Using a laptop in everyday life, users sometimes encounter a problem: a key on the keyboard has broken off. The reason could be any factor: cleaning the keyboard, using a vacuum cleaner for cleaning, a stray cat (yes, even this happens), a small child who is interested in everything around him and accidentally breaks a key, and much more. But not everyone knows that this small problem is quite easy to fix. I'll tell you how to put the button back without loss.

(caution! a lot of photos) Trouble has happened, and the keyboard of your laptop looks like this:

Laptops are all different, but most often their fastening is similar (fastening principle). The key on the back side looks like this:

We see two pairs of fastenings: - two latches; - two grooves for the rocker ears. The key cover is attached to the keyboard using a special rocker, which consists of 2 parts connected by a hinge in the middle and forming the letter X (ha).

It often happens that the key “breaks out” along with the rocker. In this case, you must first disconnect the rocker from the key cap, install the rocker on the keyboard, and only then return the key to its rightful place. To do this, take the key, unsnap the latch on one side of the key, and remove the antennae of the rocker and grooves on the other side:

We get 2 parts: a key cover and a rocker. The keyboard has 3 lugs for fastening: one larger and two smaller.

If for some reason these fasteners are bent (for example, a heavy object fell on the keyboard, as a result of which a key jumped out), they need to be bent into the correct position. Be careful, you cannot bend these fasteners too much, because... They are made of aluminum and break off easily, after which repairs will become much more difficult. Install the rocker on the keyboard: - place it under the large mounting ear

Lightly press the rocker onto the 2 small mounts.

After installing the rocker, you can put the key cover back. - insert the protrusions on the rocker into the grooves of the lid

Here you need to act carefully and not miss :). Next, making sure that the ears are in the grooves, lightly press the top of the key and secure the key cover; a light click will be heard.

Ready! the key is in place.

Large keys (Tab, Shift, space, enter), in addition to a plastic rocker, can have a metal stabilizer for uniform pressing.

There are two additional tabs on the keyboard base to secure this stabilizer. Otherwise the design is the same as described above.

First we wind the ends of the stabilizer.

Then we insert the lower “antennae” of the rocker into the grooves and, with a light press, put the button in place.

The spacebar (and sometimes other long keys) is supported by two rockers and a stabilizer.

In principle, the installation is no different from the above-described installation of the Shift key.

Above we examined the internal structure of the keys of a Hewlett-Packard laptop. I almost forgot. If a swing, consisting of two parts, was disassembled during an emergency, do not despair. Using a needle, toothpick or other suitable object, it is easy to assemble. We put one side into the groove, and to install the second side we use our auxiliary object.

Now, dear users, you will not have any questions: - how does a laptop keyboard work? - how to fix a key on a laptop? - How to replace the key cover? - what to do if a cat tore out a key on a laptop? and so on. Good luck!

p.s. Because there were too many photos, an additional part of the article can be viewed on my blog (if anyone is interested in this topic), where, for example, you can see the devices of the keys of Asus and Apple laptops, some differences and similarities are described.

Tags:

geektimes.ru

Installing keys on a laptop keyboard

When cleaning the laptop or due to careless handling, some elements of the keyboard may fall out. Often, inserting a button into a laptop is quite simple, but with some of them, for example, if it is the Spacebar, novice users sometimes have problems. Next, we will tell you how these buttons work, as well as how they can be put in place.

How a button works on a laptop keyboard

To learn how to accurately and accurately fix a dropped button in its proper place without breaking it, you need to know the structure of this element of a laptop computer. It includes:

Note that different laptop manufacturers may have their own button designs that are slightly different from those described. Therefore, if you are going to put the fallen input device elements back on your own, be extremely careful.

Installation procedure for regular square buttons

If a regular square button falls out, it is very easy to return it to its place. But first, carefully examine the design of the element, all the grooves and fastenings. If the design is standard, the process will consist of just a few simple steps:

Everything described is true when the entire button falls out along with the fastener. If only the top cover “fell off”, then putting it back in place is much easier - you only need to complete the third point of the description. It may seem complicated to some, but with the proper skill, you can secure a key in this way in just a few seconds.

Working with large buttons

For “long” elements (input, tab, etc.), due to their slightly different design, slightly modified installation rules are required. The design differences lie not only in their size, but also in the presence of a stabilizer made of rigid metal wire, which ensures uniform pressure along the entire length of the element. The “Space” even has two metal rocker arms, so installing it is somewhat more difficult.

In places where large buttons are installed on the metal substrate of the input device, there are a couple of additional ears for fixing the stabilizer.

But in general, the whole process, even for the Spacebar button, differs little from that described above:

1. Install the first stiffener into place by inserting the ends of its fasteners into the holes on the input device substrate. At the same stage, the second stabilizer must be secured in plastic grooves, which are located directly on the inside of the button cover.
2. Place the ends of the second “rocker arm” into the special loops on the keyboard, put the button in place and press the lower part until it clicks.

The remaining large buttons, which are designed with only one stabilizer, are easier to work with. For them, the action is limited only to the last point of the sequence of actions described above.

How to repair broken keys

Typically, any repair of this laptop element comes down to replacing the broken one with a part from the donor device. If you try to fix damage on your own, for example, to plastic fasteners or “elevator” connections, then the smoothness, noiselessness and softness of operation of the restored element may differ significantly from its neighbors.

Sometimes, along with the button, a rubber spring glued to the film of the input device falls out. In this case, before installing the dropped element, it will need to be carefully glued strictly in the center with the wide part to the bottom. It is not allowed to move it to either side, since it must be located exactly under the conductive path and close it when pressed.

Therefore, always carefully study the design before disassembling/assembling them. For example, for the case in the photo, the rule applies - first you need to secure the metal elements to the keyboard, and then put the cover on them. However, for the most part, all modern laptops have a similar design, and all the buttons on them are installed in the manner described above.

LookForNotebook.ru

How to insert a button in a laptop

All work on the laptop will be suspended if any button on the keyboard fails. In this case, only replacing the old little assistant with a new one will help. Removing a non-working key and inserting a new one is not difficult.

The first thing you need to do before you start replacing the button is to turn off the laptop.

Next, the key is removed using a flat metal tool. It should be noted that this procedure must be performed very carefully, because the fastening of the keys on a laptop is different from that on a computer keyboard. The removal mechanism itself is simple - the tool is inserted between the fastening points of the button, rotated in stages and snaps off first one side and then the other. By doing this carefully, you can avoid removing the key along with its mounts (lifts).

If the fasteners were removed along with the button, then they should be carefully separated from the base of the key and inserted back into the keyboard in the same way as detaching - first one part is fixed to the body, then the second.

Setting a key is a very simple procedure. It is important to remember here that you need to position the button exactly to the place where it will be located, and it should be snapped in a bottom-to-top sequence.

If you need to insert a button with a rigidity amplifier into the keyboard (enter, spacebar, etc.), then the fastening takes place in three stages. The first thing to do is insert the amplifier into the slots on the keyboard body. The second and third stages are similar to the actions for attaching a regular button.

The design of a laptop keyboard is almost no different from a computer keyboard, so the very principle of attaching buttons to the base has been preserved. But still, whether you change buttons due to a breakdown or because you want to give your equipment a new style, you need to pay attention to the correspondence of the key fastenings, since for some models they are completely different.

How to check a computer's IP address

We constantly use mobile PCs in our daily lives. In it, the keyboard is the part of the device that takes on the most mechanical stress.

The most common causes of breakdowns

The keyboard on a mobile PC has approximately the same structure as on a personal PC. It, like any device, is very sensitive to all kinds of dirt, animal hair, crumbs, and especially liquid spilled on it. After a certain amount of time using the keyboard, the buttons on the mobile PC fail or simply fall off.

Also, the cause of breakage of buttons on a mobile PC can be a simple banal cleaning of the keyboard using a vacuum cleaner for this purpose. Or a small child may accidentally tear off a key. Also, the cause of such a breakdown can be pets that live with you. This also happens quite often. But you don’t need to immediately take your laptop for repair. Very often you can do everything yourself.

Button structure

Before you consider how to insert a button on a laptop, you need to know its structure and mounting features.

The button consists of the key itself, the mechanism for holding it and a spring element with which it can be raised and lowered. There is also a special film with platforms and tracks.

The mount consists of two parts. These two parts are fastened together in the center by small “antennae”. They come out of the inner part of the mount and are inserted into special grooves in the outer part. Thanks to this design, they can move when you press them. The button itself is attached to opposite sides.

Let's look at how to insert a button on a laptop

If a button falls out on your mobile PC, there is no need to panic right away. In many cases, the problem resolves itself. At home, you can also solve the problem of how to insert a button into a laptop. To do this, it is enough to have a simple paper clip with you. Before inserting the button into the laptop to replace it, the old part must be removed from the keyboard. Working with buttons on a mobile PC requires more care, as they are flatter and can be damaged if pressed hard. Removing an element goes like this. It is necessary to bend the paperclip into a straight line and pass it under the lower platform of the keys. Now you need to pull it towards you, and the key will jump off its base.

Now let’s figure out how to insert a button on a laptop, provided that all the “antennae” located on the “rocker” and the grooves are not damaged. This is the easiest way. To do this, the button must be installed in the upper position on the base under the required mount. After it is in place, the key must be gently pressed down.

It should be noted that you do not need to use force when installing the keys. Any pressing must be done smoothly and easily.

After installation, you need to carefully check the fastening of the replaced key. When purchasing new buttons, you need to check whether they will fit your laptop model. If you need to change several parts, it is better to do it gradually. So as not to confuse the location on the keyboard.

Before inserting a button on a laptop, you need to carefully check that the plastic mount, which is located under the key itself, is in its place. It may immediately seem that it is very difficult to connect everything. But in fact, this is not entirely true, because in reality there can only be one correct option. You can't install anything differently.

How to insert a large button

Let's look at how to insert a button on a large laptop. These are keys such as Space, Tab, Shift, Enter. In addition to the “rocker”, which is made of plastic, they may also have a metal stabilizer. It is necessary to ensure that the key is pressed evenly. On the inside there are two ears necessary for attaching the stabilizer to them. You need to tie up the ends right away. Next, insert the antennae of the “rocker” into the grooves and put the button in its place by lightly pressing it.

The space bar is supported by several “rockers” and a stabilizer. A situation may arise that the “rocker” may be disassembled. It is easy to assemble using a needle or toothpick. One side needs to be inserted into the groove, and the other is installed using a needle.

Let's look at how to insert a button on a laptop in which the mount is made using metal brackets instead of plastic swings. The mounting here is also simple. Just note that it will be noisier.

How to fix a button on a laptop

It is necessary to clearly understand that there will most often be only one attempt to repair the button. This must be taken into account before installing a button on the laptop. Before starting the necessary work, you need to have the following tools available:

We place the broken mount on its workplace. Take a needle and a soldering iron. We apply the needle to the place of the broken antennae and make sure that it goes there a few millimeters. We heat it with a soldering iron and fuse it into the mount. We bite off the unnecessary part of the needle. Clean off excess plastic.

Let's consider another option on how to install a button on a laptop. We heat the needle with a lighter and make a groove with it, into which you can place, for example, lint or something like that. Place it in the groove and glue it with superglue

How to make a new button yourself

If the button stops working, there is no need to rush to throw it away immediately. Maybe she's just sunk and can be put in her place. If not, then first you need to carefully examine the button. If it is just a little cracked, then it can be glued together with simple superglue. The only most important thing is that her contact is in the same place.

If the key cannot be glued, you can make it yourself. Let's look at how to make a button on a laptop yourself. To do this, you need to have plasticine with you. You need to make the necessary shape from plasticine and fill it with resin. You also need to put the contact there. It must be installed correctly. To make it even, it can be trimmed with ordinary sandpaper. So, we figured out how to make a button on a laptop at home. In some cases, this is easier than taking your mobile PC for repair.

If the button just fell out

If a button falls out of a laptop, you need to perform the following steps. On its reverse side there are grooves and latches. They contain “rocker ears”. Their purpose is to connect the button to the keyboard. If the rocker key falls out, they need to be disconnected. Then the “rocker” is installed. There will be a button cover on it. They are connected to each other by the grooves that are located on them.

So, we figured out how to install a button on a laptop. As you can see, this is not very difficult to do, and in many cases you can solve the problem without contacting a service center.