The Google Chrome browser is very popular, like all Google products. It attracts the attention of many with the simplicity and speed of its work, but... There is one thing, namely crash "shockwave flash has crashed"— what to do and how to solve this problem? And as always, any error appears at the most inopportune moment - when several tabs are open that I have been looking for for a long time.

Cause of shockwave flash has crashed error

Maybe you noticed that after installing the Google Chrome browser, you could immediately watch online videos without installing additional plugins. And other browsers always ask to install Adobe Flash Player separately. This is because Chrome already has Flash Player built in. And when running, Chrome automatically loads both its built-in Flash Player and the one that was previously installed on the system before Google Chrome. It turns out there is a conflict and voila: “shockwave flash has crashed.”

Solution to shockwave flash has crashed

Go to Chrome and paste chrome://plugins/ into the address bar

A window will open Plug-ins. And immediately the flash player will be the first Adobe Flash Player (2 files).

Click on the top right on +More details and see the following picture.

We see two plugins Shockwave Flash

The 1st one is built into Chrome itself, because it is installed in the Chrome folder:
C:\Users\admin\AppData\Local\Google\Chrome\Application\…..

The 2nd one is built into Windows C:\Windows\system32\Macromed\Flash\

So, the one in Chrome is updated along with Chrome itself - quite rarely. Then we will turn it off - click under it Disable.

We restart the browser and try to work.

If “shockwave flash has crashed” comes out again, what should I do?

Then we try to disable the second plugin and enable the first. But remember, one must remain turned on.

If it didn't help?

Try removing Adobe Flash Player. To do this, close all browsers, go to “Control Panel -> Uninstall Programs” in Windows 7 and uninstall Adobe Flash Player Plugin. Look carefully, you need to remove it exactly Plugin.

If you work in other browsers, then when watching online videos they will ask you to install Adobe Flash Player - just allow them and they will install it themselves latest version.

Please RATE this article with 1 - 5 stars:

Flash player crash in Google Chrome, Opera and other browsers based on the Chrome engine, accompanied by a message Shockwave Flash plugin is not responding is a fairly common phenomenon that can occur in both a novice and an experienced user. In the English version the program writes the error “Shockwave Flash has crashed”.

The reason for such a failure, as a rule, is that a conflict occurs in the installed flash players when trying to display video clips or animated banners in the browser. The point is that in Chrome browser and others, its engine already has a built-in plugin responsible for playing Flash. At the same time, users often install another one additionally, for example, from Adobe or Macromedia. Accordingly, when trying to play a video, these two libraries cannot decide which of them will do it. As a result, the flash plugin crashes and a corresponding message states that it is not responding.

How to fix Flash Player error in Chrome

The solution to this problem is actually very simple. Launch the Chrome web browser and address bar we write this:

chrome://plugins

So we will open the list installed plugins browser:

In the page that appears, in the upper right corner, click on the plus sign “More” to expand all the information about the installed libraries.
Now we scroll through the list of modules and find the line Adobe Flash Player(Adobe Flash Player). If there is “2 files” in parentheses to the right of it, then the “Shockwave Flash is not responding” error appears 100% due to a conflict.
The next step is to try to disable the built-in player that comes originally built into the Internet browser. It is located in the application folder and its library is called pepflashplayer.dll:

That is, only one Flash plugin is enabled, the second is disabled. Restart Chrome. Checking the video playback. For example, on YouTube or RuTube.

Didn't help and the flash player still crashes? Then let's try to do the opposite - enable the built-in module and disable the third-party one.
As a rule, you must earn money either by one method or by another.

Comment: If you have only one such plugin installed and it periodically crashes, then you need to try downloading the latest version of Adobe Flash Player and install it according to the instructions.

A computer is an unpredictable machine. Users quite often complain about the appearance of certain problems. But few people know how to solve them. Especially when it comes to working in World Wide Web. Very often in the Yandex browser and other programs for working on the Internet. What to do in this case? Why might such a problem occur? How dangerous are such problems? All this will be discussed further below. There's really no need to panic. Even a novice user can improve the situation for the better.

Where does the module come from?

The first step is to understand what we are talking about. What is Shockwave Flash? The answer is not that difficult. This is a kind of module for working with graphics in browsers. Typically a component of FlashPlayer.

Without it, pages will not be able to load normally and display information on the screen. As practice shows, quite often various problems occur with Shockwave Flash. They render the module inoperative. But how to fix this? What options for the development of events take place?

Reboot

Shockwave Flash not working? The first option that can be offered to the user is the browser. This is only suitable for cases in which the module refused to work only once. More precisely, when the error does not occur regularly.

An alternative solution is to restart the browser. You need to close the corresponding application, then open it and work with pages on the Internet. Such techniques help fix crashes and problems that arise when surfing the Internet. But most often the situation does not disappear after reloading or refreshing the page. The module still does not respond (Shockwave Flash). “Yandex browser” or any other program for accessing the Internet - it doesn’t matter what application we are talking about. The main thing is that it is necessary to look for other methods of dealing with the problem.

Multiple FlashPlayers

By the way, not everything is as difficult as it seems. As practice shows, Shockwave Flash often refuses to work due to the fact that there are several FlashPlayers in the browser. In this case, a plugin conflict simply arises. It's easy to fix the situation. It is enough to disable one of the Flash Players.

How to do it? You must adhere to the following algorithm of actions:

1. Open the Yandex browser and click on the grid image.
2. In the menu that appears, select "Settings". Next, find and click on the “Show advanced settings” button.
3. Go to the section "Personal Data Protection" - "Content Settings".
4. Go to "Modules" - "Disable some".
5. Find FlashPlayer and click on "Disable". Required to turn off old version applications. If they are the same, there is no difference which “Player” to use.

You don't need to do anything else. If the reason lay in an application conflict, then the module will work without failures. What to do when this step does not help? Shockwave Flash does not respond in the Yandex browser, but there is no module conflict on the computer. What to do then?

Reinstallation

You can try to completely remove FlashPlayer and reinstall it. The method is good, it helps quite often. By the way, if FlashPlayer is not initially on the computer, then the Shockwave Flash plug-in will not work. Therefore, you need to either make sure that the program is installed and reinstall it, or install it for the first time.

1. Download Adobe FlashPlayer from the official website of the application.
2. Launch executable file and click on "Run".
3. Following the installer's instructions, install the program.

Important: You must close your browsers during any installation. And that's all. Then there will be no problems with installation. And the situation in which Shockwave Flash does not work will be reduced to a minimum.

Update

The next scenario is an outdated version of FlashPlayer. The thing is that FlashPlayer is updated from time to time. Older versions of the program are no longer supported. And then a situation may arise in which Shockwave Flash does not respond in the Yandex browser. And not only in it, but in general in all programs for working with the Internet.

Usually FlashPlayer offers You should not refuse it. This way, the risk of Shockwave Flash refusing to work will be minimized. You can download the latest version of the utility at any time from the official Adobe website.

Viruses

But there is another option for the development of events. This is the one that causes the most inconvenience. What to do if the Shockwave Flash module fails to work? For Opera or any other browser, it is recommended to download and install AdBlock. At the same time, check your computer for viruses. And if there are dangerous objects, treat them or remove them.

That is, the reason that Shockwave Flash does not respond in the Yandex browser and other applications may be viruses. The situation can only be corrected if the computer is completely healed. Then all modules will start working normally.

Sometimes the Google Chrome browser starts to slow down, after which a message appears: “Failed to load Shockwave Flash.” You will learn what to do in such a situation and how to fix the bug in this article.

Important! Starting in September, Google begins blocking Flash Player in favor of HTML5 to increase user security. But if you are using older versions of the browser, this article will be useful for you!

Reasons for the error

The problem appears after the user opens a site that uses Flash. But this only happens when other Internet browsers are installed on the PC in addition to the Google browser.

Chrome has a built-in Flash player, so there's no need for additional Windows software. For other browsers, you need to install the Flash player separately. In this situation, when a user opens a site with Flash, Chrome connects all plugins at once: its own and those installed in the OS (all versions). After this, the error “Failed to load Shockwave Flash” appears.

Troubleshooting

Getting rid of the bug is easy. There are several ways to do this.

Browser update

Setting up Adobe Flash Player

If this does not help, configure Adobe Flash Player on your computer and browser.

Disabling unnecessary modules

The shutdown process is shown in detail in the video.

Important! If the problem persists after this, enable the built-in OS plugin and disable the internal Chrome plugin.

Removing an external plugin

Use this method if the previous one did not work.

Important! If you need a Flash player for work, go to the official Adobe website, download its latest version for a specific browser and reinstall it on your PC.

Disabling hardware acceleration

Flash Player has hardware acceleration enabled by default. But it may not work correctly.

In the Internet

Launch a site with Flash (for example, any online cinema) → RMB on video → Settings → Display tab → uncheck the “Enable hardware acceleration” checkbox.

Yandex.Browser is one of the most popular web browsers in our country, which provides stable and secure web surfing. As is the case with Google browser Chrome, Yandex Browser already has a built-in Adobe Flash Player plugin, but, unfortunately, its operation does not always work correctly. In this case, we will look at the problem when the plugin refuses to work, giving the error “Shockwave Flash has crashed”.

The “Shockwave Flash Has Crashed” error in Yandex Browser tells the user that the plugin has crashed, which is why it cannot continue its work. There can be various reasons for this problem, and below we will try to cover as many of them as possible.

Reason 1: outdated browser version

First of all, you need to make sure that the current version of Yandex Browser is installed on your computer. The fact is that Flash Player is updated along with the web browser; therefore, if for some reason the computer has an outdated version of the browser, then the plugin may not be updated on the computer.

To check Yandex Browser for updates, click on the menu button in the upper right corner and in the window that appears, go to the item “Advanced” – “About the browser” .

The browser will begin searching for updates. If they are found, you will be prompted to install them.

Reason 2: presence of viral activity

Flash Player is an unstable plugin that significantly increases the number of vulnerabilities in the browser. To exclude the possibility of virus activity affecting the browser and, in particular, the plugin, you will need to scan the system for virus threats using your antivirus or a specially implemented cleaning utility.

Reason 3: the browser is not working correctly

We should not exclude the possibility that the browser does not work correctly on the computer, and therefore you can try to solve the problem only by completely reinstalling it.

To do this, you will need to remove the browser from your computer, but it is advisable to do this not through the “Control Panel”, but using a special removal utility Revo Uninstaller, which will allow you to additionally scan your computer for the presence of any types of files and registry keys related to the browser being deleted. After uninstallation is complete, you should restart your computer.

Once the uninstallation process is complete, you can proceed to installation new version browser by downloading the latest distribution from the link at the end of the article from the manufacturer’s official website. Start the browser installation process. It is more than likely that such a simple method will solve the problem with the functionality of the plugin.

Reason 4: hardware acceleration The presence of hardware acceleration in Yandex.Browser is designed to reduce the load of the Flash Player plug-in on the web browser. Unfortunately, such a function can sometimes lead to incorrect operation browser, so you can try disabling it.

To do this, open in Yandex.Browser any site that contains Flash content, right-click on the content and in the context menu that appears, go to the item "Options" In the miniature window that appears, you will need to remove the bird from the item "Enable hardware acceleration" , and then close the window and check the functionality of the plugin.

Reason 5: System malfunctions

If you find it difficult to determine the reason for the plugin not working, the system restore function built into Windows can help you, which will allow you to roll back your computer to the moment when all programs, including Yandex Browser, worked correctly.

To do this, call up the menu "Control Panel" and then go to the section "Recovery" .

Open item "Run System Restore" . Having opened a new partition, you will need to select a suitable recovery point in it, which corresponds to the period of time when the computer was completely working correctly.

Run System Restore and wait until it finishes.

Need to download music from VK?