Windows updates are sometimes of dubious value. In the case of the tenth version, all updates except the first one after installing the system are very specific and controversial. Moreover, they always start unexpectedly, without notifying the user, and their sudden use causes a long reboot of the computer. However, you can interrupt updates at absolutely any stage.

How to quickly abort an update

If you want to quickly abort a Windows 10 update, depending on its stage, the first thing you need to do is the following:

• if the update has just started downloading, disconnect from the Internet;
• if the update has downloaded and the system asks to restart to apply it, do not do this under any circumstances;
• If, when you turn on/off/restart the system, installation or application of updates begins, turn off the computer by holding down the power button on the case.

Regardless of the option you are faced with, all further steps will look almost the same. Now you need to start canceling the update that has started. For the last problem, start the system in safe mode.

Starting the system in safe mode

Starting the system in safe mode is guaranteed to help start the computer without installing downloaded updates.

If you skipped downloading updates and turned off your computer, canceling them will pose some difficulties: every time you try to log in, an attempt will be made to apply the updates. This problem has been fixed in later versions of Windows 10, but it's best to start your computer in Safe Mode just in case.

How to cancel an update

The described method is suitable for quickly interrupting an ongoing update. Now the update needs to be canceled so that you can safely turn on the Internet or restart your computer.

There are several ways to cancel an update that has started. For example, enable a metered connection or Airplane mode. However, such methods will only interrupt the downloading of new packages and will not prevent the installation of already downloaded ones. The only way to guarantee that an update has started is through the command line.

To resume the update, you need to repeat the above commands, replacing stop with start.

How to permanently disable downloading updates

The method mentioned in canceling the update also includes prohibiting further system updates. But there are others that will be more convenient and reliable in the long term.

Via Group Policy Editor

This method will not work for the home version of Windows and some unlicensed versions of the system, but by using it you will retain the ability to manually run system updates.

Through services

This method is available on all versions of Windows, but it completely prohibits system updates: you will not be able to download updates even by running the scan manually (the scan will run, but will not be able to find anything).

Via Registry Editor

This method can be considered the most correct, but also the least safe: it makes changes directly to the system configuration, and you can cancel it only by doing the same steps again. If you intend to use this method, save the path to the parameter you are changing somewhere so that you can roll back the changes.

Via Windows Update

Blocking updates through Windows Update is official, but it is also the least reliable. In this way, you will mark your own Internet connection as metered: updates are not downloaded through such connections in order to save traffic.

Even if the user has not made a reservation for a system upgrade on his computer to an operating system with index 10, data on the PC from Microsoft resources will be saved in memory and the device will regularly and persistently recommend installing Windows 10. The notification is displayed in the tray and there is no option to refuse to download files .

Therefore, a large number of people have already asked the question: “How to refuse Windows 10?” Below are specific steps to resolve the above issue and at the same time to ensure the correct further functioning of the Update Center.

Step one - installing the client

From the Microsoft resource support.microsoft.com you need to download and install the current Operating System Update client. This is important to do before you decide not to upgrade to Windows 10. After installing the required client version (for a 32-bit or 64-bit system), you will need to restart the PC.

Step two - cancel in the registry

To cancel the update you will need to do the following:

Ready. Completing these steps will save your computer from installing the tenth version. However, it is advisable not only to cancel the transition to a new OS, but also to delete the directory with the files of the intrusive “Ten”.

Step three - getting rid of downloaded Windows 10 files

They are located in the “$Windows.~BT” folder and take up about 4 GB of space on the computer.

In order to delete this directory, you must use the following algorithm of actions:

These steps allow you not only to cancel and refuse to install Tens, but also to significantly free up disk space on your computer.

How to prevent a notification from appearing in the tray?

To resolve this issue, do the following:

What to do if the computer owner canceled the installation, but then changed his mind and decided to install a new OS?

You should take the following steps to return your PC to its original state:

1. open the window "Update Center";
2. enter the list of hidden upgrades and reactivate “KB3035583”;
3. then open and uninstall the “DisableOSUpgrade” parameter;
4. reboot your PC.

Microsoft resources will again begin to receive offers to upgrade to Windows 10 and files of the new OS will be downloaded for its subsequent installation.

Those wishing to upgrade their operating system to the new Windows 10 are faced with problems. If you tried to reserve an update, but you don’t receive it or don’t find the update icon in the taskbar where it usually appears, after reading this article everything will fall into place, and you will have the best OS from Microsoft at the moment. The problem is solved in several ways, the meaning of which is not significantly different. This is a forced update via:

• command line;
• "Windows Update";
• Media Creation Tool application.

Through the Support Center

Such an update is implemented by launching the “Support Center” using several methods.

Launch via control panel

• Find the installation icon in the form of a white flag in the taskbar and click on it with the left mouse button.

• Click on the link with the appropriate name.

• The installation tool for Windows Update will launch.
• In the left frame, click on the link that says: “Search for updates.”

Via "Control Panel"

Such a launch is implemented by sequential actions:

• We go to the Control Panel, which is launched through Start.
• We visualize its contents in the form of large icons.

• Immediately launch Windows Update » .

Via Start

• Open the Start menu and enter the appropriate installation query in the search bar.

• Launch the Update Center.

• In the Windows response that appears, click on the “Get Started” button.

After the Update Center has started doing its job, you will have to wait a little. When the message “Upgrade to Windows 10” appears, follow the steps below:

• Click on the “Get Started” button.

• We wait for the Windows 10 update to download and the installer to prepare before installing the downloaded files.

• Once the download is complete, the installer will prompt you to restart your computer before installing the Windows 10 update.
• We confirm the restart so that the update to Win 10 will start.

Before the PC boots, updates will be installed, system files will be modified, after which the computer will start with Windows 10 installed.

Command line procedure

This is a forced update — A simple and quick way to get a Windows 10 update is to use the command line.

• We reserve the download of update files (after this the corresponding icon will appear on the Taskbar).
• We enable automatic updating (the Update Center service must start along with the operating system).
• We clear the “SoftwareDistribution\Download” directory in the Windows folder.
• You will then need to run a command interpreter with administrator privileges.
• Enter “command” in the Start search bar, call up the context menu of the corresponding icon and click “Run as administrator.”

• Insert or enter the command “wuauclt.exe /updatenow” into the line, confirming its execution by pressing “Enter”.

• In a few minutes (not immediately), Windows 10 will begin downloading through the OS update tool.
• After the download is complete, the computer will ask to restart, as a result of which updates to your operating system to Windows 10 will be installed.

Using the Media Creation Tool

The update program will not only help you update the operating system to Windows 10, but will also download an image with its installation files, and also create a bootable USB flash drive for a clean installation of Windows 10. This method is notable for the fact that it does not require a reservation or a long waiting process until it comes time , - the user only needs to select the OS version and confirm its download, and the installation will be carried out automatically. All user data will be saved in case of update. MCT also allows you to roll back the system state to a previous version from a backup within 30 days if something is not to your liking or does not go as expected.

• Download the Media Creation Tool and launch it.
• Select the item as in the screenshot and click “Next”.

• We wait while the application downloads the necessary update files to Win 10. At this time, you can minimize the window and go about your daily business.

• The completion of the process will be marked by the appearance of a window with the license terms.
• We carefully study them and, if accepted, click “Accept”.

• Be sure to select the first option if you don’t want to reinstall all applications and lose your own data.

• We check the specified settings and click “Install” to get Windows 10.
• The "ten" version is detected automatically. In our case, we installed Windows 10 Pro.

• We are waiting for the update installation operation to complete.
• You can still cancel the update at this step if you change your mind.

• Confirm PC restart.
• After this, its parameters will be configured. After a couple of minutes, the computer will restart again and boot with the new OS.

Possible problems

Windows 10 includes automatic updates with no option to reject or cancel them. Often, automatic installation of updates leads to graphics system failures, which can cause monitors to turn off. One of the first updates from Microsoft included numerous bugs related to the security system, which resulted in the permanent termination of the “explorer.exe” process, which is responsible for the window interface. The reason for this was that the update process, one of the first Windows 10 updates, could not complete correctly. Therefore, a message appeared about the impossibility of completing the installer’s work correctly, and cancellation would result in a mandatory reboot of the PC. The process would then begin again, and this could continue cyclically due to the fact that updates are imposed by Microsoft without the ability to cancel or refuse the installation process.

Recently, these problems have been solved, but no one is immune from their recurrence or the emergence of new, possibly more serious ones.

(Visited 4,906 times, 1 visits today)

Microsoft is quite optimistic about the worldwide upgrade of computers to Windows 10: by 2018, it hopes to overcome the mark of 1 billion devices with the new operating system.

In less than a year, Microsoft managed to acquire over 300 million devices running Windows 10. However, the figure would hardly have been so impressive if not for the company’s aggressive actions, which sometimes force users to install a new version of the OS.

Constant offers to upgrade that you can no longer refuse, free distribution of the system, exclusive projects for Windows 10 - all this is part of the company’s big plan to conquer computers around the world.

Despite all the delights of the system, many do not need the update and want to stay on their favorite “seven” or even XP. But Microsoft has a different vision, so the company constantly changes the update system, and each time it becomes more and more difficult to refuse the offer.

A proposal can appear at any time during system operation, which is associated with several curious cases. So, a similar proposal appeared during a weather forecast in Iowa. A window popped up live on top of the weather map.

In addition, more and more complaints are appearing that the system has been updated even without warning the user. Just step away from the computer for a few minutes, and at that moment the process of installing a new system can begin. Or the installation of Windows 10 may occur after the system is rebooted during the installation of a new update package.

Also, constant changes occur with the update window. At first, the option to refuse the upgrade disappeared, and the choice was only between “Update now” and “Update at night.” In this case, simply closing the window does not help - soon it appears again.

Now, when there are less than two months left until the end of the free update, Microsoft is going all-in and simply won’t let you refuse it.

Of course, Microsoft claims that the choice is always up to the user, but now the rules have become even stricter, so the system allows you to change the update time only once, after which the process will begin automatically.

But if the user needs more time to weigh the pros and cons, or is terrified of losing his good old operating system, then there are several ways to delay the update's doomsday.

Simple Method

The Get Windows 10 (GWX) application is responsible for updating the system. It is this that displays all these annoying messages and windows. The application appeared on all computers with Windows 7 and 8/8.1 after the system update and is protected from deletion. You shouldn’t even try to get rid of it, because the application will in any case find a way to return to the system during the next update.

Everything related to the transition to Windows 10 gets into the computer through minor system updates, so the most effective way is to simply disable all updates.

After this, if there have been offers to update the system, it is worth cleaning the computer. For this purpose, many enthusiasts release their own utilities (for example, I Don't Want Windows 10), which remove everything that is somehow related to the annoying upgrade. But you should be careful, since such home-made programs can easily “infect” the system with viruses. Therefore, to be sure, it is better to do everything manually.

Uninstalling updates manually

Disabling automatic updates may result in missing critical updates that fix system problems and protect against new threats. Therefore, it is worth selectively removing only those updates that are responsible for installing the GWX utility.

On Windows 7, in the Update Center you need to find updates under the codes KB3035583, KB2952664, KB3021917, KB2977759 and KB3083710; in Windows 8 - KB3035583, KB2976978 and KB3083711. However, after restarting the computer, these updates will return, as they are classified as “required” updates that are installed automatically.

In addition to these packages, there are several more that can install GWX, although Microsoft released them for other purposes: KB30383710, KB3035583, KB2990214, KB3014460, KB3083711, KB3021917, KB2977759, KB2976978 and 2952664. After this, you need to prevent the system from making updates at level registry to these packages did not return after rebooting the system. Full instructions are published on the community website Microsoft .

After all these manipulations, the proposals for switching to a new system should disappear, but some users note that after the next system update, the line disappeared from the registry.

Also, do not forget that the system has downloaded all the files necessary for the upgrade, so they need to be deleted. This is done using the standard Disk Cleanup utility. After scanning the system, you just need to click the “Clean up system files” button.

How to disable Windows updates - this question is asked by users who need to prevent the installation of system updates on their computer. With default settings, the operating system automatically searches for, downloads and installs updates released for Windows.

The corporation releases update packages for the Windows operating system approximately once a month. From time to time, Microsoft makes unscheduled updates designed to solve emerging problems in the operation of the OS, or to close discovered security holes in Windows.

The main part of the updates concerns system security. When installing updates, system fixes are applied or some new features are added.

In addition to regular updates, so-called major updates are released in Windows 10, after which, essentially, a new version of Windows 10 is installed on the computer. Such major updates are released once or twice a year.

Some users disable system updates for various reasons. The main reasons for refusing Windows updates:

• sometimes it happens that after installing updates, the normal operation of Windows and installed programs is disrupted;
• if the user has a limited Internet connection, downloading updates affects the amount of traffic consumed;
• lack of free space on the computer disk;
• after applying the update, the user is afraid of losing activation of the operating system;

How to disable automatic updates? You can solve the problem using system tools, or using third-party software. In this article we will look at 5 ways to disable updates on Windows 10 using the operating system.

Simply disabling Windows Update on Windows 10, as in Windows 7 or Windows 8, will no longer work. The maximum that can be done in this way is to pause updates for up to 35 days.

How to disable automatic updates in Windows 10 (1 method)

Windows 10 tools automatically detect, download and install updates on your computer.

On Win 10, you can disable updates in a way that disables the Windows Update service. This method works on all versions of Windows 10 and ensures that Windows updates are disabled forever.

Enter Administrative Tools from the Control Panel, or an easier way: in the Windows Search field, enter the expression: “administration” (without quotes), and then open the Administrative Tools window.

In the “Administration” window, double-right-click on the “Services” shortcut.

In the “Services” window that opens, in the “Services (Local)” section, find the Windows Update service.

In the “Properties: Windows Update (Local Computer)” window, in the “General” tab, change the “Startup type” setting to “Disabled”.

In the “Status” setting, click on the “Stop” button to stop the Windows 10 update service.

After this, Windows 10 updates will stop coming to your computer.

To enable automatic updates, in the Properties: Windows Update (Local Computer) window, select your preferred startup type: Automatic (Delayed Start), Automatic, or Manual.

How to disable Windows 10 updates using Local Group Policy Editor (method 2)

Now let's see how to disable Windows 10 updates in the Local Group Policy Editor.

Please note that this method is not suitable for Windows 10 Home (Windows 10 Home) and Windows 10 Single Language (Windows 10 Home for one language). This feature is present in older versions of the operating system: Windows 10 Pro (Windows 10 Professional) and Windows 10 Enterprise (Windows 10 Enterprise).

First you need to log into the Local Group Policy Editor. In the Windows Search box, type "gpedit.msc" (without the quotes), and then launch the editor.

Alternatively, you can enter the Local Group Policy Editor in the following way: press the “Win” + “R” keys, enter the expression “gpedit.msc” (without quotes) in the “Open” field, and then click on the “OK” button.

In the “Local Group Policy Editor” window, follow the path: “Computer Configuration” => “Administrative Templates” => “Windows Components” => “Windows Update”.

In the “Windows Update” section, find the “Set up automatic updates” item, right-click on it, and select “Change” in the context menu.

In the Automatic Update Settings window, enable the Disabled setting, and then click OK.

After this, the operating system will not search for, download or install automatic Windows 10 updates.

Disable Windows 10 update in Registry Editor (3rd method)

The third way to disable Windows 10 updates is to make changes to the Registry Editor. This method works in all versions of Windows 10.

In Windows Search, type "regedit" (without the quotes), and then run the command.

In the Registry Editor window, follow the path:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\WindowsWindowsUpdate\AU

In the Registry Editor window, right-click on the free space. From the context menu, select New and then DWORD Value (32-bit). Give the parameter a name: “NoAutoUpdate” (without quotes).

Right-click on the “NoAutoUpdate” parameter and select “Change...” in the context menu.

Enter the parameter “1” (without quotes) in the “Value” field and click the “OK” button.

To enable updating in Windows 10, you need to change the value of the parameter to “0” (without quotes), or simply delete the “NoAutoUpdate” parameter from the registry.

Enable metered connection in Windows 10 (4th method)

This method allows you to configure a metered connection in the Windows operating system if the network is accessed via Wi-Fi.

Follow these sequential steps:

1. Enter system settings.
2. From the Settings window, go to Network & Internet.
3. Go to the “Wi-Fi” setting, click on the “Manage known networks” link.
4. Select your Wi-Fi network, click on the “Properties” button.
5. In the “Set as metered connection” parameter, move the slider to the “Enabled” position.

After this, the Windows 10 operating system will limit the search for and receipt of updates. With this method, some updates will be installed into the operating system. Major updates such as OS version updates will be disabled.

Disabling access to Windows Update (method 5)

In new versions of Windows 10, after the user disables it, after some time the Update Center service on the computer is forced to turn on. Therefore, we need to block Windows Update's access to Microsoft update servers.

First, disable the Windows Update service (see method 1).

1. Follow the path:

HKEY_LOCAL_MACHINE\SYSTEM

1. Right click. Select New => Partition. Give the section a name “Internet Communication Management” (hereinafter without quotes).
2. Click on the created “Internet Communication Management” section, create a new section inside with the name “Internet Communication”.
3. Enter the “Internet Communication” section, right-click on the free space.
4. From the context menu, select New => DWORD Value (32 bits).
5. Name the created parameter “DisableWindowsUpdateAccess”.
6. Double-click with the left mouse button on the “DisableWindowsUpdateAccess” parameter. In the “Change DWORD (32-bit) Value” window, select “1” in the “Value” field.

In the Registry Editor, do the following:

1. Enter the section:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

1. Create a "DWORD (32-bit) Value", name it "NoWindowsUpdate" with a value of "1".

Create a new parameter in the Registry Editor window:

1. Follow the path:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate

1. Create a "DWORD Value (32-bit)", name the parameter "DisableWindowsUpdateAccess" with a value of "1".

Close the Registry Editor window and restart your computer. When checking for updates, Windows Update will show error "0x8024002e".

To enable access to Windows Update servers, remove previously created settings from the registry.

Turn off automatic updates from the command line

To stop and then disable the Automatic Updates service, use the command line:

1. Run Command Prompt as Administrator.
2. Run the following commands sequentially:

net stop wuauserv sc config wuauserv start= disabled

To start and enable the Automatic Updates service, run the following commands:

Net start wuauserv sc config wuauserv start= auto

Disable checking for updates in Windows 10

If all else fails, turn off checking for updates in Windows 10. If automatic checking does not work, it means that updates will not be downloaded to your computer.

To disable checking for updates, follow these steps:

1. Run Command Prompt as Administrator. In the command line interpreter window, enter the command and then press the Enter key:

takeown /f c:\windows\system32\usoclient.exe /a

1. Go to the path: C:\Windows\System32, find the file “UsoClient.exe”.
2. Right-click on the “UsoClient.exe” file and select “Properties” from the context menu.
3. In the Properties: UsoClient window, open the Security tab.
4. Under the “Groups or Users” section, click on the “Edit” button.
5. In the “Permissions for the “UsoClient” group” window, remove all permissions for each group or user one by one. Don't forget to click on the "OK" button.

After this, restart your computer.

To restore the permissions of the "UsoClient.exe" file, run Command Prompt as an administrator, and then run the command:

Icacls c:\windows\system32\usoclient.exe" /reset

Restart your computer.

If necessary, you can manually check for and install updates from Windows Update.

Conclusions of the article

If necessary, the user can disable automatic updating of Windows 10 permanently using operating system tools: by disabling the Windows Update service, in the Local Group Policy Editor, or in the Registry Editor.