How to free up RAM space in a laptop. How to clear RAM on Android: optimal options
The stability and productivity of a personal computer depends on its configuration. RAM plays a significant role in this. It, no less, determines the performance of the computer, acting as a kind of intermediary between the central processor and the hard drive or other storage medium. Let's figure out how to properly clean RAM or physical memory on a Windows PC.
Types of computer memory
Computer memory is a system that includes various special storage devices that interact both with each other and with the central processor.
Physical random access memory (RAM) is a volatile part of the system used to temporarily store program code read from the medium and any other input or output data, which is then processed by the processor. Its functions are implemented using random access memory (RAM) in the form of a technical strip with microcircuits inserted into special paired sockets on the motherboard. Information accumulated in RAM modules is lost when the computer is turned off. Therefore, this type of memory is called RAM. Its volume today is calculated in gigabytes. Usually these are levels from 2 GB and above. It is impossible to operate a computer running Windows 7 without installed RAM modules included in the common logical chain.
Installing RAM sticks into the slots intended for it
If there is a shortage of RAM, virtual memory is used, which allows you to automatically redistribute the load by moving parts of running applications to an area on the hard drive allocated for these purposes. Physical read-only memory (ROM) is used for long-term storage of information that remains even when the computer's power is turned off. The entire array of information is located on a hard drive with Windows 7 installed. Data can also be stored on any other media (flash drives, DVDs).
There is also video memory built directly into the video card. With its help, an image is formed on the monitor screen.
Checking physical memory (RAM) load
Increased load on RAM can cause your computer to slow down and, in some cases, even freeze. When instability occurs, you need to understand which existing processes are consuming resources. Use the standard combination Ctrl+Shift+Esc to open the Task Manager. In the window opened through the “Processes” menu item, you can see how and in what volume the RAM is consumed. And its total consumption as a percentage is reflected on the right at the very bottom of the open window.
RAM consumption by work processes in Windows 7
The “Performance” tab shows the allocated RAM (in appropriate units) for running threads and processes, the amount of available, cached, free memory, a chronological graph of its use, and also presents kernel data.
The “Performance” tab displays detailed information about the distribution of RAM
RAM cleaning technique
Reducing the amount of RAM consumed in all cases of increased load that leads to slowdown of Windows 7 is an effective way to troubleshoot problems that arise. To do this, you should perform a series of actions to clean RAM and optimize its operation.
Closing unused programs
All open applications can be identified by the icons located at the very bottom of the “Desktop”. They are also shown in the “Task Manager” on the “Applications” tab. To close a currently unused software process, you must remove the task by first selecting the application with the mouse. This method is especially relevant when some programs freeze, for example, Word or Excel. But closing applications like this is an emergency and should be used only in extreme cases.
Disable frozen or unused applications to free up RAM
Stopping background processes
Closing many programs does not always lead to their complete stop. Many background processes are still running. This especially applies to torrents and similar software. Often, such applications deliberately leave running processes in the RAM even after the program is closed. You can stop them on the “Processes” tab in the “Task Manager”. And on the “Services” tab, it is possible to stop services that are launched by default, which are not used by the system, but consume resources. This will also deactivate the associated background processes.
Please note that after restarting the system, all changes made will be lost. To prevent this from happening, you should disable unused services on the corresponding tab in the “Administration” section, opened through the control panel. Select the startup type “Disabled” via the context menu.
Selecting the service startup mode
Table: services allowed to be disabled
It is also possible to stop and then disable the service through the command line. To open it, enter the Win+R keyboard combination and execute the cmd command. Next, on the command line, write and execute net stop<имя запускаемой службы>or sc stop<имя запускаемой службы>and then sc config<Имя выбранной службы>start=disabled.
Stopping Windows 7 services via command line
Optimizing application startup mode
The Windows 7 configuration includes a useful feature that allows programs to be loaded automatically when the system starts. Many applications are initially configured to use startup. But this is not always necessary, because each program launched in this way takes up part of the RAM resources. Enter the Win+R combination from the keyboard and run the msconfig command. In the window that opens, on the “Startup” tab, uncheck those applications that do not need to start automatically and save the settings.
Disable automatic downloading of unused programs
When should Windows Explorer be restarted?
Some of the unnecessary processes that accumulate in RAM while the system is running can be removed by restarting Windows Explorer. Go to the “Processes” tab in the “Task Manager”, select the running explorer.exe with the mouse and end the process by clicking the corresponding button.
Terminating the explorer.exe process stopping Windows Explorer
Now, on the Applications tab, launch Windows Explorer again, adding a new explorer.exe task.
Creating a new task to launch Windows Explorer
You can, of course, restart Windows 7. In this case, Windows Explorer will automatically restart.
Making changes through the Registry Editor
You can disable autorun of unused applications and thereby clear RAM using the Registry Editor. Remove shortcuts to unnecessary software in the Run and RunOnce subsections of the HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE branches, respectively. To open the Registry Editor, enter the Win+R combination from the keyboard, then run the regedit command.
Removing shortcuts to unused programs from the startup list
Checking the system for viruses
Malicious code can greatly load the RAM. Checking Windows 7 for viruses and removing them in a timely manner will stabilize your computer. To search for and remove malicious code, you can use free utilities:
To start an anti-virus scan, click the “Start scan” button
The utility will quickly find and remove viruses from your personal computer
Start an anti-virus scan by clicking the start scan button
How to clean your hard drive
To free up RAM, you can use the standard set of utilities available in Windows 7, which allow you to delete unused software and files, offline pages, and completely empty the Recycle Bin.
Select the hard drive partition through the “Disk Cleanup” menu item, sequentially opening “Start\Accessories\System Tools”, check the boxes for everything that needs to be deleted and click the “OK” button.
Selecting files that will be deleted when cleaning the hard drive
In the same way, you can clean any partition of your hard drive through its properties (the desired window opens through the context menu) by selecting the appropriate item.
Launching hard drive cleaning through the built-in menu item
Video: the main reasons for RAM usage
How to clean RAM using special programs
For high-quality RAM cleaning, various third-party software is used.
Here are some of these utilities:
Check the required boxes and run the application.
To start, just click the “Optimize” button and the program will do everything itself
Select the necessary items and start cleaning the RAM
Just run the utility and it will automatically clear RAM at set intervals
The process of clearing RAM is carried out automatically
When the maximum permissible load threshold is reached, you should reset current processes and clear the system cache
Launch the application and check the boxes for the desired settings. If necessary, perform RAM optimization manually
How to unload: methods of prevention
Follow simple rules:
Cleaning virtual memory on a computer or laptop
The functioning of virtual memory is provided by the file pagefile.sys, called the page file. It is usually located on the Windows 7 system logical drive. To free up virtual memory, pagefile.sys must first be deleted and then recreated.
Quite often, when working at a computer, a user may notice that the system begins to slow down. The RAM is to blame, or rather the fact that it is heavily loaded with open programs and browser tabs. When memory becomes very low, the computer simply freezes, and when you open a window of some program, it may say “Not responding.”
Removing utilities from startup
Removing unnecessary programs from startup will also help increase space in RAM. All of them are launched together with the start of the operating system without your participation and immediately take away part of the OP. Often this list includes antivirus software, cloud storage, browsers, and email services. Moreover, leaving only what you need there will increase the loading speed of Windows. And programs that you use once a week, or even less often, can always be launched manually, by simply clicking on the shortcut.
So, to open the desired list, right-click on Start and select from the list - this is for Windows 10. Seven owners can find this item simply by clicking on Start. If it is not there, use the combination Win+R.
In the Manager, go to the section. The entire list of programs that are included in it will be displayed there. Select those that you rarely use and click “Disable” at the bottom. If everything is done correctly, the following message will appear in the “Status” column: “Disabled”.
After this, close all running applications and restart your computer. All - utilities removed from autorun will not load and will not consume RAM.
For those with Windows 7, in the window "System configuration" after opening the desired tab, a list of elements that are included in startup will immediately appear. If you do not need the program to start every time with the system, uncheck the box next to it. When you leave the birds only in the required fields, click “Apply” - “OK”. All that remains is to restart the computer.
Restart Explorer
Restarting Explorer will also help free up Windows RAM a little. To do this, open again "Task Manager" by clicking on the panel below and selecting the desired item from the list.
Next, on the “Processes” tab, find “Explorer”, highlight this field and click "Restart". The screenshot shows that it takes up 13.7 MB of memory. Then the screen will turn black for a second and all icons from the Taskbar will disappear, but after a while everything will appear again in the form you are familiar with.
Well, now our Explorer takes up a little less memory - only 9.6 MB.
For owners of the seven, the algorithm of actions will be slightly different. Open the Manager window and go to the “Processes” tab. Here you need to find explorer.exe in the list. Select this line and click "End process" bottom right.
The next step is to restart. In the open window, click the tab “File” - “New task”.
This method helps to free up memory for a short time, since with each new Explorer window that is opened, it will decrease again.
Using programs
There are also special programs for cleaning RAM. Many of them have a very simple interface in Russian, and will be understandable even to an inexperienced user.
The main window of the utility looks like this. It displays data from physical, virtual memory and system cache. The “Clear” button will help you perform the action we need.
The program is also quite popular. With its help, you can not only “Clear RAM”, but also perform “Optimization”, which will free up more space.
Another utility. It displays memory data in digital and graphical form, and the “Optimization” button will free up RAM.
Creating a cleanup file
If you want to feel like a cool computer geek and don’t want to install third-party utilities, you can create your own script, using which you can clear your RAM.
To begin, open Notepad. Click "Start" - "All Programs" - "Accessories" - "Notepad".
Then paste the following text into it:
MsgBox “Are you really going to clean the RAM?”,0,”Cleaning RAM”
FreeMem=Space(204800000)
Msgbox "The RAM cleaning process completed successfully!",0,"Cleaning RAM"
In the FreeMem line you need to indicate the amount of RAM that is installed on your computer. The value is calculated as follows:
Memory capacity in gigabytes*1024*100000
For example, for 2 GB we write 204800000, 3 GB – 307200000, 4 GB – 409600000.
If you don’t know how much RAM is installed on your computer, then you can look at this value. In the top ten, right-click on Start and select “System”.
In Windows 7, click the Start button, and then .
The window that opens will display all system data. Look what is written in the box "Installed memory"– this is the value we need. Write the value into the text in Notepad.
Click on the "File" tab and select "Save As".
Select a location on your computer, in the example this is your desktop. You can write anything in the “File name” field, most importantly add the extension .vbs at the end. In the "File type" field, select "All files" from the drop-down list. Then click the “Save” button.
To clear memory, simply double-click on the created file. Then in the window that opens, click “OK”.
The RAM space will be successfully freed.
Removing viruses
Pest programs, or simply viruses, also take up space in RAM. Most often they are added to the startup list. Therefore, it makes sense to scan your computer for viruses with an installed antivirus program and delete all malicious files found.
For more information on how to remove viruses from your computer, read the article by following the link.
Freeing up space on your hard drive
Lack of free space on the hard drive also affects RAM. The fact is that all unused applications from RAM are loaded into the page file. And if there is not enough free space on the disk partition where the paging file is stored, then this method will not work effectively. So it is very important to free up space on the disk partitions that you have on your computer by deleting all unnecessary files, programs, photos, music.
Since the paging file is stored on the system drive by default, and it is most often called C:, you can read the article: how to free up space on drive C:
About the author: Oleg KaminskyWebmaster. Higher education with a degree in Information Security. Author of most articles and computer literacy lessons
Instructions
Video on the topic
Sources:
- RAM
If, when working on a computer, you often see the “Insufficient virtual memory” window, by analogy with RAM, a solution naturally suggests itself - you need to clear the virtual memory. This is not the right decision. The problem of lack of virtual memory is solved by completely different methods. But if you are concerned about the safety of your secret information: logins, passwords, and so on, then the page file, also known as virtual memory, really needs to be cleared.
Instructions
Select sequentially the items “Administration”, “Local security policy”, “Security settings”, “Shut down: clearing the virtual page”. Right-click the menu, select Properties, and check Enable.
Video on the topic
Helpful advice
If your computer keeps popping up a message about low virtual memory, you should consider expanding it.
Sources:
- Changing the virtual memory size
- how to clear computer virtual memory
In the age of information progress, it has become fashionable to keep abreast of events in the virtual world. Today, our communication is most often virtual; love can be expressed in SMS messages. Even a computer, which seems to be a virtual space, has a virtual memory. It is designed to release information that is stored in RAM. Operational memory does not always cope with assigned tasks. It sends less important files to the virtual memory. But virtual memory also has boundaries, so it also becomes clogged over time. To free up virtual memory, you can use special programs or increase the size of virtual memory.
You will need
- Magic Memory Optimizer Software.
Instructions
Using the Magic Memory Optimizer program, you can free up full RAM. Let him clean only the operational memory, but this allows less information to be virtualized memory. After launching the program, click the “Main Optimizations” button. You will see a list of basic program settings. To set the optimal settings, click the “Recommended” button at the bottom of the window. On the right side of the window is status. As soon as memory will begin to fill, a message will appear on the screen asking you to optimize the memory. Optimizing memory will result in faster system performance.
If a message appears on the screen indicating that there is not enough , the virtual memory optimization program is not doing its job. Another way to free up virtual memory is to increase it. To perform this operation, right-click on the “My” icon. In the context menu that opens, select “Properties”.
In the new window, go to the "Advanced" tab. In the “Performance” block, click the “Options” button.
In the window that opens, go to the “Advanced” tab. In the “Virtual” block memory» Click the “Change” button. You can now increase the virtual memory size. Recommended size with 512 MB RAM: 756 MB – 1512 MB. There is no point in setting a higher value. You can set the memory size by , in which the size of the minimum virtual memory is the product of a factor of 1.5 and the size of RAM. Virtual memory= 1.5 x operational memory.
Video on the topic
With timely cleaning of virtual memory, the quality of operation of PC systems and programs increases significantly. Cleaning is also necessary to maintain the confidentiality of data that remains in the page file.
Instructions
Open “Start”, “Search” - enter Regedit in the search field. Open the found file with the extension .exe with a double mouse. In the window that opens, find the folders on the left: “HKEY_LOCAL_MACHINE”, the “SYSTEM” folder, then “CurrentControlSet”, then “Control”, then the “Session Manager” folder, and finally “Memory Management”. In the window that opens on the right, find the file “ClearPageFileAtShutdown”, call the context menu, click “Change” and in the window that appears change the value 0 to the value 1.
Users who have had the opportunity to reinstall the operating system on their computer may have noticed that immediately after this the loading and operation speed of applications and the “response speed” in general increase. However, this effect disappears over time due to the fact that the RAM becomes “littered” and there is little free space left in it in order to comfortably work with applications.
You will need
- Computer, RAM
Instructions
Video on the topic
Sources:
- RAM
On many computers there is a virtual one memory. It is needed to increase space if there is not enough space on the RAM. It can be cleaned. This will allow you to maintain confidentiality, as well as clear your personal computer from unnecessary overload.
You will need
- Personal computer, Memory Booster Gold program
Instructions
To make it virtual, go to Start. There you can see an item such as “Search”. Open and enter secpol.msc there. Click on "Enter". As a result of the search, the “Local Security Policy” window will open in front of you. Select the Local Policies tab. Click on "Security Options". Find the line called “Shutdown: clearing the page file”. Double-click on it with the mouse (left button). And in the next window, select the “Local Security Option” section. Set the switch to the “Enable” position, and then click “Ok”. After these manipulations, restart your computer.
You can do this in . Go to Start and click on Search. The program will prompt you to find information. Enter the command "Regedit". Go to "HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Session Manager Memory Management". On the right side, look at the “ClearPageFileAtShutdown” option. You can use the Group Policy Editor tab. On the left side, click on the “Configuration” column. Then select the Settings tab. Go to "Security Settings" and "Local Policies". Then select Security Options. On the right side of the window that appears, click on “Shutdown: Clear...”. Then select "Enabled". Click on "Ok".
Download a program such as Memory Booster Gold to your computer. When you run it, it automatically cleans the virtual memory. If you wish, you can do all this manually. To do this, you will use the “Clear” button. Through "Start" go to . Type the word “msconfig” there. Press the “Enter” button on your keyboard. Next, a window will open. In it, check the box that you would like to delete. After reboot or they will be deleted automatically.
Video on the topic
Quite often, users, including the computer, and without knowing it, launch a large number of programs and services that are completely unnecessary for work. This leads to the fact that after some time the computer’s performance decreases, which manifests itself in its periodic or complete “freezing”. The latter is due to the fact that free RAM runs out, and the system is forced to access the paging file on the hard drive, which is used to store parts of programs and data files that do not fit in RAM. In order to avoid such troubles, it is enough to follow some rules and use special utilities.
Instructions
First of all, you need to make sure that the interruptions in work are associated precisely with the deficiency. The easiest way is to call and look at the amount of allocated memory. In the event that the amount of allocated memory exceeds the size of your computer's RAM, the system swaps the page file. If you are a fairly advanced user, you can go to the “Processes” tab and sort them by memory size. Unused ones can be stopped. At the same time, you must be sure that the process will not cause computer malfunctions. The method of cleaning RAM described above is only operational; the results will be saved until the computer is rebooted.
If you need to clean RAM constantly, you can use the msconfig utility (Start->Run). Using it, you can stop unnecessary services, remove some programs from startup and save the system changes made. Again, be careful and careful - similar services or running programs can also lead to unpleasant crashes.
Finally, the easiest way to avoid running out of memory is to use special programs to clean RAM and keep it in working condition. For example, "RAM Saver Pro" is a tool for professional monitoring, cleaning and optimization of RAM. Serves the operating system, freeing up MS Windows drivers and processes for applications that require maximum load and RAM. In addition, there is also "MaxRAMFree" - a program for cleaning RAM. The utility can automatically clear RAM after a certain time for a specified number of megabytes, and for this there are two options at once that can work together or defragment memory when a certain load threshold is reached. "MaxRAMFree" places its icon in the system tray (an area on the Windows OS taskbar), from where you can also start the process of clearing RAM to one of the set levels.
note
Stopping some system processes and services can cause serious system problems.
Helpful advice
In order to prevent a lack of RAM, remove all unused programs from startup in advance and stop unnecessary services.
Sometimes it happens that the system issues a message about shortage. The problem is not serious if such a message occurs once, but if it pops up regularly, then the system urgently needs more free space in virtual memory.
Instructions
Right-click on the My computer icon in the Start menu or on your desktop.
In the context menu that appears, select “Properties” at the bottom. The System properties window will open. It will have several tabs.
Go to the “Advanced” tab by left-clicking on it. There you will see three settings sections, each of which has its own “Settings” button, which opens the settings window.
Click on the “Settings” button related to the “Performance” settings section. The Performance settings window will open. This window will contain three tabs. Go to the "Advanced" tab.
Left-click on the “Change” button at the bottom of the window in the “Virtual” section memory"(Virtual memory). The settings window of the same name will open. The top part of this window is occupied by a list of local disks operating on yours. Select the local disk on which you need to free up the virtual memory. In the value entry window, you will see the current values for the initial size of your virtual memory and its maximum size.
Increase these values to have more free virtual memory on your computer.
If your system often displays a message about the lack of virtual memory, and you do not know what size you need, then allow the system to allocate virtual memory for its needs automatically. To do this, select the “System managed size” mode. Confirm your choice by clicking OK. This will save you from annoying system warnings, and your virtual memory will be under control.
Video on the topic
The main problem with relatively old computers is insufficient RAM. The easiest way to improve system performance is to distribute RAM among important processes.
You will need
- - Advanced SystemCare.
Instructions
Naturally, the most reasonable solution is to purchase and install additional RAM cards. This method has a significant drawback - it requires financial costs. Therefore, first try to optimize your computer using software.
Visit the site www.iobit.com. Download the Advanced SystemCare program from there. It is designed specifically to optimize most parameters of the operating system and internal devices of the computer. Install Advanced SystemCare and restart your computer.
Launch the program and go to the Utilities menu. Select "RAM". In the window that opens, click the “Settings” button. Activate the following items by checking the boxes next to them: “Automatically clear RAM”, “Do not clear while in use by the central processor”, “Use smart RAM compression technology”. Click the "OK" button.
Now click the “Forward” button and select the “Deep Clean” option from the menu that appears. Once the process is complete, “250 memory clearing” will be displayed in the lower left corner. The indicator “250” indicates the amount of freed memory in megabytes.
Now return to the main menu of the program and select “System Diagnostics”. Check the box next to “Optimization” and click the “Scan” button. After completing the analysis of the operating system, click the “Repair” button. The program will automatically disable unused or unnecessary services that consume CPU and RAM resources.
Now open Control Panel and go to System and Security menu. Open "Administration" and go to "Services".
Video on the topic
Setting RAM operating modes is one of the important elements of computer optimization. It is usually used when the reason for a slow PC is a lack of RAM.
You will need
- - Advanced System Care.
Instructions
Start by increasing the amount of virtual memory allowed. This will slightly reduce the load on the RAM boards. Open the Computer menu properties and select Advanced system settings. Now open the Advanced tab and click on the Options button located in the Performance menu. Open the Advanced tab and click the Edit button.
Uncheck the "Automatically select paging file size" checkbox. Select the system partition of the disk and check the box next to the “Specify size” option. Enter the minimum and maximum paging file sizes. Click the "Set" button and close this window.
Now start disabling unnecessary services. More than 10% of always-on services are not used by most users. Open Control Panel and go to the System and Security menu. Now open the “Administration” submenu and go to “Services”.
Select the unnecessary service with the right mouse button and select “Stop”. Follow this procedure for any services you don't use, first checking the Description column. Be extremely careful. Disabling an important service can cause your operating system to crash.
Now download from the site www.iobit.com AdvancedSystemCare utility. It helps, but in this case you only need one of its functions. Launch this application and open the Utilities menu. Go to "RAM".
Click the Settings button. Check the boxes next to all items in the menu that opens. Click the "Apply" button. Now click the “Forward” button and select the “Deep Clean” option in the menu that appears. Keep this utility open and allow it to automatically clean up your RAM.
Sources:
- how to reduce windows memory
The Pagefile.sys file is a paging file designed for temporary storage of data that does not fit in the computer's RAM. Cleaning the selected file is performed using standard tools of the Microsoft Windows operating system and does not involve the use of additional software.
Instructions
Call the main menu of the Microsoft Windows operating system by clicking the “Start” button to carry out the procedure for clearing the pagefile.sys page file when rebooting the system and go to “Run”.
Enter the value regedit in the “Open” field and confirm the execution of the Registry Editor tool by clicking OK.
Expand the registry hive HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session and change the value of the ClerPageFileAtShutdown parameter to 1 or create a missing parameter with the value:
Name - ClearPageFileAtShutdown;
- value type - REG_DWORD;
- value - 1.
Return to the main Start menu to perform the alternative operation of clearing the pagefile.sys page file and go to My Computer.
Expand the Local Security Policy node and select Security Settings.
Call the service menu of the “Virtual memory page file cleanup” policy by double-clicking on its field and select the “Enabled” checkbox.
Confirm the execution of the command by clicking OK and exit the Group Policy Editor tool.
Boot the operating system into recovery mode to perform an operation to overwrite the pagefile.sys page file, which is not displayed in the console due to a Windows software error, and enter the value cd \ in the command interpreter text box.
Confirm the execution of the command by pressing the Enter function key and enter the value copy drivename:\boot.ini pagefile.sys in the command line test field.
The RAM of a personal computer is responsible for its performance. The more applications and games running simultaneously, the less RAM is left for fast operation of the operating system. RAM memory is loaded by both active and background processes, so they need to be periodically “cleaned” and get rid of unnecessary ones. Let's figure out how to clean your computer's RAM on Windows 10.
As with any other issue related to setting up a PC or laptop, the problem can be solved in several ways:
- standard tools from Microsoft;
- third-party cleaning programs;
- cleaning using a script.
Freeing up RAM can significantly speed up your PC. Let's consider all optimization options in more detail.
Cleaning by hand
In this case, you will have to independently determine which processes will be removed to unload the RAM and clear it of garbage. Since every running program uses at least a minimum amount of RAM, you'll need Task Manager to view the entire list of running processes. We perform the following actions:
- Launch "Task Manager". The easiest way to open the application is with the key combination Ctrl + Shift + Esc. Open the first tab “Processes”.
- The “Memory” column contains information about the amount of RAM used by this process in MB. Click on it to sort the list in descending order. As a result, those processes that load the most RAM will be at the top.
- To achieve greater offloading effect, sort all processes by CPU (Central Processing Unit) load.
- Select the program and right-click on it. In the menu, click on “End task”.
- If you want to end all processes associated with this application, then click on “End process tree”.
You don’t have to be afraid to close system processes that will “eat up” RAM - Microsoft OS will not allow you to do this and will show a warning window.
If the program refuses to close and continues to “hang” in the list, the RAM begins to become more and more clogged over time and there is an obvious memory leak, then the problem is related to malware and viruses. The standard Windows Defender will not help in getting rid of such processes. For virus cleaning and optimization, you need the AdwCleaner program. It can be downloaded from the developers’ website at http://adwcleaner.ru.
This way you can speed up the device. However, the next time you turn on the PC, some of the applications will be launched again. So that you don’t have to close them manually every time, you need to use the startup settings:
- Open Task Manager again.
- Here you can find those programs that load RAM and constantly run when you start your PC. By looking at the “Impact on startup” column, you can understand how many resources this utility consumes when you turn on the PC.
- Use the right mouse button to open the menu and click on “Disable”. Now the application will not start when you turn on the computer.
All described methods are fully working on Windows 10 of all versions and bit depths (x32-bit and x64-bit).
Third party software
If you do not want to optimize RAM cache loading manually, then special programs will come to the rescue. The following utilities will be discussed below:
- KCleaner;
- Mz RAM Booster;
- Wise Memory Optimizer;
- CleanMem.
Using the utilities listed above, you can free up memory and improve PC performance.
KCleaner
You can download this RAM cleaner from the official website using the link. On the page, click the “Download” button.
After the standard installation procedure, launch KCleaner. In the program window you will see the opportunity to free up RAM in manual and automatic modes. To start cleaning clogged RAM memory, click on the “Clear” button (1). Using the buttons under the number “2” you can start cleaning with subsequent action (turn off/restart the computer, close the program).
The “Run” button (1) allows you to enable cleaning in the background.
Click on “Expert Mode” (2) to see a list of processes and their impact on RAM load:
Mz RAM Booster
This utility is a kind of analogue of the “Task Manager”. In it you can monitor the current load on physical memory, processor, video memory, etc. In the “Tasks” block, you must click the “Smart Optimize” button to use the built-in optimizer:
Mz RAM Booster also optimizes the operation of the central processor, virtual swap file, etc. The utility performs all tasks automatically.
Wise Memory Optimizer
CleanMem
To start cleaning, you need to right-click on the widget and select “Clean Memory Now” from the menu:
Using the script
If you don’t want to manually close each process and remove it from startup options, but installing third-party programs is also not suitable for you, then you can create your own script. It automates the cleaning process and makes it easier. Just follow the directions.
Open standard Notepad and copy the text into it:
MsgBox “Clear RAM?”,0,”Do-it-yourself RAM cleaning”FreeMem=Space(409600000)
Msgbox"Cleaning complete",0,"Do-it-yourself RAM cleaning"
The number 409600000 should represent your amount of RAM. The value is calculated using the formula N*1024+00000. Instead of the multiplier N, you need to put the amount of RAM in GB.
Now save the finished file with any name and extension.vbs:
Run the script so that the following window appears:
After clicking OK, the script will clean up the RAM in the background.
Bottom line
Freeing RAM from unnecessary processes will significantly speed up your computer. Cleaning will also help identify the presence of malware. You can use either the manual method or install third-party programs with a convenient graphical interface and widgets.
Video
If you have any difficulties cleaning RAM using the methods described, a video with a visual description of all the steps will help you understand the instructions.
