How to set up a touchpad on a laptop. How to set up a touchpad on a laptop How to activate mouse gestures in Windows 10

Every laptop/netbook user is familiar with an information input device called a touchpad. For some users, this is the most convenient replacement for traditional computer mice, as it opens up a lot of functionality; for others, especially gamers, this is a terrible device that is more often used accidentally than intentionally. But few people know that laptop developers have long provided for most of the possible nuances when working with the touchpad and provided users with the ability to enable or disable the touchpad if necessary, as well as set their own settings and create personal gestures that will make using this device as easy as possible. As the title of this article suggests, we will talk about the existing features of setting up the touchpad for devices running the Windows 10 operating system.

How to work with touchpad gestures in Windows 10.

Manufacturers of mobile personal computers have simplified the procedure for enabling/disabling the touchscreen model as much as possible. Some modern laptops (from HP) have a dedicated button next to the touchpad, which is responsible for activating and deactivating it. Accordingly, all that remains is to click on this button and get the desired result. But this feature is not implemented on all laptops. In most cases, a certain combination of the “Fn” and “F1 – F12” keys is responsible for enabling/disabling. Here everything depends on the manufacturer of the selected device, for example:

“Asus” – combination “Fn + F9”;
“Lenovo” – “Fn + F8”;
“Samsung” – “Fn + F5”;
“Toshiba” – “Fn + F5”;
“Acer” – “Fn + F7”;
“Dell” – “Fn + F5”.

Unfortunately, there are often cases when the key combinations mentioned above simply do not work. In this case, you should pay attention to the BIOS settings, and to do this you will need to do the following:

When you turn on your computer, also depending on the manufacturer, open the BIOS settings. This could be the “F2”, “Delete”, “TAB” key, etc.;
on the “Advanced” tab, find the parameter whose name contains “Pointing Device”, and switch it to “Enabled” mode to enable it, and “Disabled” to disable it;
save the changed configuration by pressing the “F10” key and wait until the computer restarts.

If none of the above helped, it is possible that the correct operation of the touchpad is affected by incorrect drivers for this software. Therefore, you will need to install or reinstall them in any convenient way, for example, by downloading from the manufacturer’s website or using specialized software - “DriverPack Solution”.

Settings

Now we should touch on the most interesting issue related to creating your own “hot gestures” and other touchpad settings. To do this, on a computer running Windows 10, you will need to do the following:

Asus

For example, for Asus laptops there is a special utility called “Asus Smart Gesture”, a shortcut from which is placed in the tray. It should be noted that this utility completely replaces previously used drivers, therefore, in the “Properties” section on the “ELAN” tab (depending on the manufacturer, the name may be different) the devices will not be displayed, and in this case this is not required. The utility control window consists of three tabs:

As you can see, Asus does not provide many personalization options; these are just basic parameters, similar to mouse settings.

Lenovo

Other manufacturers follow a similar scheme, sometimes with a wider range of customizable parameters. For example, Lenovo also provides a separate utility with which you can configure the following points:

In addition, to obtain more detailed information on using custom parameters, just click on the icon with “?”, which is located in the lower left corner of the window. The information is provided in abundance and with step-by-step illustrations.

Conclusion

In conclusion, it is worth noting that, despite the ambivalence of users towards the device discussed in this article, one cannot fail to note its exceptional benefits. With certain skills in using a touchpad, you will notice that a conventional mouse is functionally no worse, and in some cases even more convenient. Therefore, you should not rush to turn it off.

Most laptops have a touchpad, which requires configuration after installing the new Windows 10 operating system. Therefore, if your touchpad does not work properly, is not sensitive enough or does not respond well to gestures, you should use these instructions.

How to enable or disable the touchpad?

Enabling and disabling the touchpad is done through the keyboard. To do this, use the keys of the “F...” row. Therefore, you need to pay attention to the buttons “F1”, “F2”, “F3”, etc. One of the keys will be marked with a special symbol and will be responsible for turning the touchpad on and off.

IMPORTANT! In the instructions that come with the laptop, there is a section dedicated to shortcut keys.

Some laptop models have more than one button responsible for the touchpad. The key combinations in this case are as follows: “Fn+F7”, “Fn+F9”, “Fn+F5”, etc.

You can also enable or disable the touchpad using a special sensor located on the touchpad itself. Often, you need to double-click on this “dot” for the touchpad to stop functioning.

If enabling and disabling the touchpad through key combinations does not work, it means that this function is disabled in the system settings. To fix this, you should do the following:

Select “Control Panel”. Open the “Mouse” section.

Go to the touchpad tab “Device Settings” or “Hardware”. If the touchpad is turned off, you need to select it and click on the “Enable” button.

If the touchpad still does not work, you should check the settings in BIOSe, update or roll back the drivers (they may be outdated or damaged by viruses). If these manipulations do not bring results, it is worth checking whether the physical part of the touchpad is damaged. To do this, you should entrust the laptop to a specialist.

Adjusting touchpad sensitivity on a Windows 10 laptop

In order to adjust the touchpad sensitivity, you should open the mouse properties and go to the “Click Pad” tab. Next, click on the “Options” button.

The touchpad sensitivity control panel will open. You can use the slider to adjust the sensitivity or click “Restore all default settings.”

What gestures work on the touchpad?

The touchpad basically acts as a mouse. If you are not using a USB device, you can customize the touchpad to suit your needs as follows:

Scrolling the page. You need to use two fingers at the same time to make up and down gestures (depending on the direction of scrolling).

Move pages left and right - swipe in the desired direction with two fingers.

Calling the context menu (analogous to the right mouse button). You need to press with two fingers at the same time.

Call up a menu with all running programs (analogous to Alt+Tab) - swipe up with three fingers.

Closing running programs. Same gesture as above. You just need to swipe down with three fingers.
Minimize all windows. Swipe down with three fingers when windows are maximized.
Calling the system search bar or voice assistant. You need to click three fingers at the same time.

To zoom in, drag your fingers from the center of the touchpad to the corners.

If all these gestures do not work, you should check the touchpad for serviceability.

What is a Precision Touchpad or Touchpad? These are precision touch panels (English touchpad: touch - touch, pad - pad), they are more sensitive and have more capabilities compared to standard touch touchpads. Input is carried out by touching the surface of the touchpad with one or more fingers. Precision touchpads were first introduced with Windows 8 laptops and are found on most laptops available today.

If your Windows 10 laptop has a precision touchpad, you'll see the touchpad settings under Settings → Devices → Touchpad. But what if your laptop doesn't have an accurate touchpad? Instead of the Settings page in Windows 10 Settings, you will see:

You will only be able to adjust the sensitivity of your touchpad, It's a shame isn't it?

Fortunately, it turns out that standard touchpads Synaptics or Elan installed on most laptops meet the requirements of a precision touchpad. So, you can enable precision touchpad on your Windows 10 laptop by simply installing the precision driver.

If your laptop doesn't officially support a precision touchpad, then your laptop manufacturer probably hasn't made a precision driver available for download for your laptop model. So you need to do it yourself install Synaptics driver or Elan for Touchpad to provide a high-precision touchpad experience on your Windows 10 laptop.

Follow the steps below to install the touchpad driver on any Windows 10 laptop and enable precision touchpad.

Install the driver and enable precision touchpad.

Step 1: First of all, check if your laptop has a touchpad Synaptics or Elan. To do this, enter in the command field "Run" or in the address bar of Explorer, press the Enter key to open the window Properties: Mouse and then click the button "Additional settings" to see if your laptop has an Elan or Synaptics touchpad.

Step 2: Download the Synaptics or Elan drivers for your touchpad from Lenovo website or Softpedia.

These precision touch drivers are supported by most laptop manufacturers. So if you use Dell, Lenovo, HP, Toshiba, Acer or any other laptop, these drivers will most likely work on your PC.

Step 3: Extract the downloaded zip file to get the folder containing precision touchpad drivers. Save this folder on your desktop for easy access.

Step 4: Open Device Manager by right-clicking on the button "Start" and select "Device Manager".

Step 5: In Device Manager, expand " Mice and other pointing devices". Right-click on the entry " Synaptics Pointing Devices", and then click the button Update driver" to open the update wizard.

Step 6: Click . This option will help you install the touchpad driver you downloaded.

As you can see in the screenshot below, the Driver Update Wizard will show a list of compatible devices.

Step 8: Click the button "Install from disk".

Step 9: In the next window, click the button "Review" to navigate to the location of the driver you previously downloaded and select the file " Autorun.inf" in the root folder and click the buttons "Open" And "OK".

Step 11: Once the precision touchpad driver is installed, you will see a message.

This is it!

Save your work, close all running applications, and restart your computer.

Step 12: After reboot, open the application "Options", go to "Devices"→ to view all available precision touchpad settings.

I hope you find this guide useful!

The touchpad (touchpad) in laptops sometimes tends to turn off. This may be due to the fact that it is simply deactivated, disabled in the system, or has failed. We will not consider the last case; we will look at solving problems using generally available methods.

What is a touchpad on a laptop?

The touchpad on laptops is a touch panel that is responsible for controlling the cursor on the screen or issuing commands to the computer system.

Control is carried out by sliding your finger across the panel, pressing the touchpad space with one or more fingers, as well as using two or more buttons located below or above. Below will be several ways to solve the problem of how to enable the touchpad on a laptop (Windows 10 on board) using various means.

What to do first?

If for some reason the touchpad turns off, it may be due to a system glitch or a short-term glitch.

The simplest option is to simply try to restart the laptop. Since the touchpad does not work, you will have to use the Win button, which calls up the Start menu, and then use the up arrow to go to the shutdown line, press the enter key, select reboot using the up arrow and confirm the selected action again with the Enter key.

It is important to remember that it is not recommended to use a forced shutdown by long pressing the power button, as this may cause system errors, and at the reboot stage you will have to perform a system recovery.

How to enable or (Windows 10) in the simplest way?

Laptops are complex and quite specific devices. However, almost all models provide several combinations that are responsible for turning on and off some devices and basic functions (sound, Wi-Fi, screen brightness, etc.).

Now - the solution to the problem of how to enable the touchpad on a laptop. Windows 10 as an operating system is unimportant in this case. All the same, it has nothing to do with turning on the touch panel, so to speak, mechanically. With this option, you simultaneously press the Fn key and one of the function buttons F1-F12, located in the top row of the keyboard.

Depending on the equipment manufacturer, F4, F5, F7 and F9 can be used as the power key together with the Fn button, and less often - F1.

Features of enabling the touchpad on HP laptops

Among all such devices, HP laptops deserve special mention. In them, the manufacturer did not provide a method for enabling or disabling the touchpad given above.

To solve the problem of how to enable the touchpad on a laptop (Windows 10 is the operating system produced by the manufacturer using this method), you need to look at the keyboard. The corresponding button should be placed separately on it.

In some models it may not be available, and the solution to the problem of how to enable the touchpad on a laptop (Windows 10) is to double or long press in the upper left corner of the panel.

BIOS Settings

In some cases, a situation may occur where the device is in a disabled state in the BIOS settings.

To correct the situation, when you turn on the laptop, you use a specific one to enter the settings of the primary input/output system, where in the Advanced section you should find the Internal Pointing Device. To enable it, set the Enabled parameter, and then save the changes (F10). Next, the laptop will reboot and the touchpad will work.

Enable or disable the touchpad

Now let's see how to enable it directly using Windows 10. First, enter the standard “Control Panel” by selecting it from the right-click menu on the “Start” button. You can also use the control command in the Run menu (Win + R).

Next, you need to set the view to display small icons, and then select the mouse section. In the properties window, a special Click Pad tab is then used, where the checkbox for disabling the internal pointing device when connecting an external one (USB) is unchecked. After this, the power button is pressed. If such actions for some reason did not give the desired result, you should click the button to restore default values. In the panel that opens, you select to restore all parameters, and then reboot the system.

Automatic driver updates

Sometimes the problem of shutdown or inoperability may be due to the presence of outdated drivers or the absence of them as such. It is logical to assume that they need to be installed or updated. Since such drivers are installed initially on laptops, you will have to update them. Let's see (Windows 10) using this method.

This is done in the “Device Manager”, which can be accessed from the same “Control Panel”. But the easiest way to get to it is by entering the devmgmt.msc command in the Run menu.

Here we find the desired device (usually it has a name like Synaptics PS/2 Port TouchPad). Right-click to open the additional menu and select the driver update line. In a new window we use automatic search and installation. If updated components are found, the system will issue a corresponding notification. But the touchpad itself could be turned off, so it’s worth checking its condition.

Updating drivers using third-party utilities

Sometimes suitable drivers may not be found in Windows' own database. The system will simply write that the latest driver versions are currently installed for the device. You can update them manually by visiting the laptop manufacturer's website, where you can find your model and download the appropriate driver.

But why do this if the update can be done automatically? The best solution would be to install software like Driver Booster. Such utilities are able to independently access the resources of hardware manufacturers on the Internet, search for and install the appropriate drivers without user intervention. The advantage of such applications is that they work exclusively directly with the websites of hardware manufacturers and software developers for its components and find the latest updates for absolutely all drivers identified in the system during the scanning process.

If all else fails

Finally, if none of the above solutions have any effect, it is possible that the touchpad malfunction is associated with the influence of some specific virus (these also occur). If the scan does not identify any threats, then, most likely, the touch panel has physical damage, and then repair or replacement cannot be avoided.

Conclusion

In general, the issue of enabling or disabling the touchpad should not cause any particular difficulties. Using keyboard shortcuts is the easiest. As for the settings made in the system, by default there is no setting to disable the touchpad when using an external mouse. It turns out that someone turned them on intentionally or accidentally. Perhaps some kind of software glitch influenced the change in these parameters. This is especially common when the user is his own administrator and installs specific software that requires access to change system configuration settings.

In Windows 10, you can optimize your work not only using hot keys on the keyboard, but also with new additional gestures on the touchpad.

A touchpad is a pointing input device that looks like a touchpad next to the keyboard. Used on most portable computers, such as laptops or netbooks. Allows you to perform the necessary actions without a mouse and keyboard.

It should be said that the gestures in question have been improved and changed by developers for use on high-precision touch panels, so it is not a fact that all of them will work on a specific user device.

To see if your computer has a precision touchpad, go to Start - Settings - Devices - Mouse and Touchpad.

Scrolling a page vertically

Move two fingers up and down on the touchpad.

Scrolling page horizontally

Move two fingers left and right on the touchpad.

Zooming in and out

Bringing two fingers together and apart.

Calling the context menu

Touching two fingers will bring up a menu similar to right-clicking the mouse.

Calling up the search bar

A three-finger tap will open the search bar.

View all open windows

Swiping three fingers from bottom to top will open Task View to view a list of all open applications.

Show desktop

Moving three fingers from top to bottom will minimize applications.

Switch between open applications

Moving three fingers left and right will allow you to switch between open applications.

If some gestures do not work, then they may not be supported or disabled in the touchpad driver settings. To go to the touchpad driver settings, you should open the Control Panel, then select the small icons and click on the “Mouse” button.

In this case, the touchpad settings are located here TouchPad - Options.

In each specific case, the settings may differ from those indicated above.

barbadosmaney.ru

New gestures for the Windows 10 touchpad

woodhummer 09.12.2015 - 22:09 Workshop

Windows 10, in addition to new hotkeys, received from the developers a wide range of gesture controls (up to 4 fingers). It is noteworthy that in addition to touch screens, the touchpad now also understands gestures. Let's take a closer look at them...

Control gestures

One finger

Normal and double click;
Move the cursor;
Select and move.

With two fingers

Click "right mouse button";
Scrolling (vertical and horizontal);
Pinch and spread your fingers together – zooming (a favorite gesture of smartphone owners).

Three fingers

Click – launch Cortana;
Scrolling by yourself – viewing open windows;
Scrolling to yourself – minimize all applications;
Scrolling left-right – switching between running applications.

Four fingers

Click – launch Notification Center;

Touchpad settings

In order for the touchpad to correctly support the commands described above, it must be compatible with the OS and the drivers for it must be installed correctly. To check, you need to get to the system settings of the touchpad: click “Start” - “Settings” and go to “Devices” - “Mouse and touchpad”.

As you can see, this section does not have an abundance of settings.

P.S.

Controlling finger gestures on the touchpad is one of the features that distinguishes Windows 10 from its predecessors. In our future publications we will continue to introduce you to new “tricks” that speed up the work of the “tens”.

updated: 09/12/2015

How to speed up your Windows 10 laptop: gestures and touchpad

Microsoft at one time improved the Windows operating system by introducing support for trackpad gestures in Windows 8. They significantly simplified computer control, helping to perform the necessary actions more efficiently without the need to use buttons like a mouse on a touch device.

In Windows 10, Microsoft has improved the developments of Windows 8. In addition to using previously introduced features, the company has added new touch controls and removed options unnecessary in Windows 10, such as swiping from the right corner to open the Charms panel, which is not here.

The only requirement to use these gestures is a Precision Touchpad, so low-end laptops won't get the new control capabilities.

To check if your touchpad supports gestures, go to Settings > Devices > Mouse & Touchpad. If the Touchpad section says “Your PC has a Precision Touchpad,” you can use swipes and taps instead of clicks.

Select an object: click on the touchpad
Scrolling: Place two fingers on the touchpad and swipe horizontally or vertically
Zoom: Place two fingers on the touchpad and move them together
Right-click: Click on the touchpad with two fingers or click on the bottom right corner
Open Task View: Place three fingers on the touchpad and swipe away from you
Show desktop: Place three fingers on the touchpad and swipe toward you. Change the direction of movement to view all windows in turn
Switch between open windows: Place three fingers on the touchpad and swipe right or left (same as Alt + Tab)
Drag an open window: double-click and drag the title bar
Open Cortana: Press the touchpad with three fingers. You can use the same gesture to open the notification center by changing the settings in Settings > Devices > Mouse and touchpad.

New touchpad gestures for Windows 10

If you like using standard gestures, try new ones, use two fingers to touch the touchpad and press – This will replace you with a right-click, below you will see a list of new gestures that are available in Windows 10.

Three fingers + tap on the touchpad - Cortana

Three fingers up slide – switch between desktops

Three fingers left, right - to switch between applications

Three fingers down - show desktop

Four fingers + press - open action and notification center

While these gestures help you quickly switch between apps and get your work done faster, not all users use the gestures offered in Windows 10.

Since all these actions can be done using keyboard shortcuts and many users prefer them over touchpad gestures.

Touchpad usage and settings

If your Surface device has a touchpad, it has right and left buttons that act like mouse buttons.

To click, press the button well. A quick touch is treated as a gesture for the touchpad. Learn more about gestures: Latest touchpad gestures.

To prevent the cursor from accidentally moving as you type, you can set a delay for touches, turn them off, or disable the touchpad. For instructions, see Change touchpad settings.

Below are some gestures you can use on the touchpad. Unless otherwise noted, these gestures work on all Surface keyboard covers and the Surface Book keyboard.

- Left touchpad button.
  - Element selection
  Right touchpad button.
- Tap anywhere on the touchpad with one finger
- - Element selection
  - Same as left click
- - Open commands in Windows apps or context menus in desktop apps
  - Same as right click
- - Moving the cursor
  - Similar to moving the mouse
- - Displaying virtual desktops
  - Same as swiping your finger across the screen from right to left
- - Move an element or highlight text
  - Similar to moving the mouse with the left button pressed
- - Scrolling a screen or document
  - Similar to dragging the scroll button on the screen or using the scroll wheel on a mouse
- - Similar to touch screen gestures

* Most Type Covers and keyboards can be clicked anywhere except the right-click area.

You can enable or disable the touchpad, change the scroll direction, enable or disable gestures, and more.

- Left touchpad button.
  - Element selection
  Right touchpad button.
- - Element selection
  - Same as left mouse click
- - Opens application commands in Windows applications or the context menu in desktop applications
  - Same as right click
- - Moving the cursor
  - Similar to moving the mouse
- - Moves an object or selected text
  - Similar to moving the mouse while holding down the left mouse button
- - Zoom in or out

You can change touchpad settings, such as turning the touchpad on or off, changing the scroll direction, turning gestures on or off, and much more. How you change the settings—in PC settings or using the Surface Trackpad Settings app—depends on your Surface model and cover.

Not sure which keyboard module you have? See Find out what kind of keyboard your Surface has.

Surface 2: Change touchpad settings in PC settings

You can use Surface 2 to change settings for any keyboard module except the touch keyboard module or the keyboard module (early models).

Step 1.
Step 2.
Step 3.	Select Change PC settings > Computer and devices > Mouse and touchpad.
Step 4.	Adjust the settings in the Touchpad section.

Surface RT:

The Surface Trackpad Settings app lets you turn the touchpad on or off, change scroll direction, turn gestures on or off, and more.

Note

You can use Surface RT to change settings for the Touch Keyboard Module or Keyboard Module (early models), but not other keyboard module models.

The Surface Keyboard Module has a touchpad with right-click and left-click buttons that work just like the buttons on a mouse. The touchpad also supports a variety of gestures.

Touchpad buttons on an earlier model of the Keyboard Module, the Surface 3 Pro Keyboard Module, and the Surface 3 Keyboard Module

Touchpad buttons on all other keyboard modules

The touchpad buttons on the Keyboard Pod, Surface 3 Pro Keyboard Pod, and Surface 3 Key Pod click when pressed.
The touchpad buttons on the Touch Keyboard Module, Touch Keyboard Module 2, Keyboard Module 2, and charger case are flat and do not move when you press them.
Press the button firmly until it clicks. A quick touch is interpreted as a touchpad gesture.

To avoid cursor jerking when you accidentally touch the touchpad while typing, you can set a short delay before a touch is triggered, disable touches, or turn off the touchpad. To learn how to do this, see Change touchpad settings.

Below are some gestures you can use on the touchpad. These gestures work on all Surface Keyboard models unless otherwise noted.

- Left touchpad button.
  - Element selection
  - Same as left mouse click
  Right touchpad button.
  - Same as right click
- Touch the touchpad with one finger anywhere
- - Element selection
  - Same as left mouse click
- - Opens an application command window in Windows Store apps or a context menu in desktop apps
  - Same as right click
- - Moving the cursor
  - Similar to moving the mouse
- - Moves an object or selected text
  - Similar to moving the mouse while holding down the left mouse button
- - Moves an object or selected text
  - Similar to moving the mouse while holding down the left mouse button
- - Scroll through a screen or document
  - Similar to dragging the scroll button on the screen or using the mouse scroll wheel
- - Zoom in or out
  - Similar to gestures on a tablet touch screen

*When you use the touchpad buttons on the first model Keyboard Module, the Surface Keyboard Module 3 Pro, or the Surface Keypad Module 3, you can touch the Touchpad anywhere other than the right-click area. **Tap-touch-drag does not work on Surface RT with Keyboard Module 2 or Touch Keyboard Module 2.

***The pinch-out gesture is available on Touch Keyboard Module 2 and Keyboard Module 2 or later, but is not supported on Surface RT.

Note

Step 1.	Attach the cover to your Surface tablet. (If you're using a wireless keyboard adapter, attach the cover directly to the Surface.)
Step 2.	Swipe from the right edge of the screen towards the center, and then tap the Settings button. (If you're using a mouse, point to the top-right corner of the screen, move it down, and click the Options button.)
Step 3.
Step 4.
Step 5.	You can change some or all of the settings, depending on which Surface tablet model and keyboard module model you have:

Change touchpad settings in the Surface Touchpad Settings app

To install the application, follow these steps:

The Surface Keyboard Module has a touchpad with right-click and left-click buttons that work just like the buttons on a mouse. The touchpad also supports a variety of gestures.

Touchpad buttons on an earlier model of the Keyboard Module, the Surface 3 Pro Keyboard Module, and the Surface 3 Keyboard Module

Touchpad buttons on all other keyboard modules

The touchpad buttons on the Keyboard Pod, Surface 3 Pro Keyboard Pod, and Surface 3 Key Pod click when pressed.
The touchpad buttons on the Touch Keyboard Module, Touch Keyboard Module 2, Keyboard Module 2, and charger case are flat and do not move when you press them.
Press the button firmly until it clicks. A quick touch is interpreted as a touchpad gesture.

To avoid cursor jerking when you accidentally touch the touchpad while typing, you can set a short delay before a touch is triggered, disable touches, or turn off the touchpad. Find out how to do this by reading Change touchpad settings.

Below are some gestures you can use on the touchpad. These gestures work on all Surface Keyboard models unless otherwise noted.

- Left touchpad button.
  - Element selection
  - Same as left mouse click
  Right touchpad button.
  - Opens an application command window in Windows Store apps or a context menu in desktop apps
  - Same as right click
- Touch the touchpad with one finger anywhere
- - Element selection
  - Same as left mouse click
- - Opens application commands in Windows applications or the context menu in desktop applications
  - Same as right click
- - Moving the cursor
  - Similar to moving the mouse
- - Moves an object or selected text
  - Similar to moving the mouse while holding down the left mouse button
- - Moves an object or selected text
  - Similar to moving the mouse while holding down the left mouse button
- - Scroll through a screen or document
  - Similar to dragging the scroll button on the screen or using the mouse scroll wheel
- - Zoom in or out
  - Similar to gestures on a tablet touch screen

***The pinch-out gesture is available on Touch Keyboard Module 2 and Keyboard Module 2 or later, but is not supported on Surface RT.

You can change touchpad settings, such as turning the touchpad on or off, changing the scroll direction, turning gestures on or off, and much more. How you change settings—either in PC settings or using the Trackpad Settings app—depends on your Surface tablet model and cover. Not sure which keyboard module you have? See Find out what kind of keyboard your Surface has.

Note

Touchpad settings cannot be changed in either the PC settings or the Trackpad settings app with the following device combinations:

Touch Keyboard Module 2, Keyboard Module 2, Charger Case, Keyboard Module for Surface 3 Pro or Surface Keyboard Module 3 with Surface RT
Touch keyboard module or keyboard module (earlier models) with Surface 2 or Surface 2 Pro

To change touchpad settings in PC settings:

Touch Keyboard Module 2, Keyboard Module 2, Surface Keyboard Module 3 Pro, Surface Keyboard Module 3 or Charger Case
Surface 2, Surface Pro, Surface 2 Pro, Surface 3 Pro, or Surface 3

Here's how to change touchpad settings in PC settings:

Step 1.	Attach the cover to your Surface tablet. (If you're using a wireless keyboard adapter, attach the cover directly to the Surface.)
Step 2.	Swipe in from the right edge of the screen, then tap the Settings button. (If you're using a mouse, point to the top-right corner of the screen, move the pointer down, and click the Options button.)
Step 3.	Tap or click Change PC settings, tap or click Computer and devices��.
Step 4.	Tap or click Mouse and Touchpad.
Step 5.	Adjust the settings in the Touchpad section. You can change some or all of the settings, depending on which Surface tablet model and keyboard module model you have:

Change touchpad settings in the Surface Touchpad Settings app

If you're using the Touch Keyboard Module or Keyboard Module (earlier) and a Surface Pro or Surface RT tablet, you can use the Surface Trackpad Settings app to change your touchpad settings.

The Surface Trackpad Settings app lets you turn the touchpad on or off, change scroll direction, turn gestures on or off, and more.

To install the application, follow these steps: